LMLaurentiu Dan Marinovici

Laurentiu Dan Marinovici

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Laurentiu Dan Marinovici has a total of 140 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Integration and Validation of Multi-Layer Mitigation Strategies for Cyber Physical Systems Resilience (RD2C Capstone I Project) (Technical Report)

    by Sai Pushpak Nandanoori, Jan K. Westman, Shwetha Niddodi, Ramij Raja Hossain, Alexander G. Schad, Manisha Maharjan, Samrat S. Acharya, Burhan Hyder, Oceane M. Bel, Soumya Kundu, et al.

    This project demonstrated the effectiveness of RD2C-developed, resilience-driven control strategies on high-fidelity system models with high penetrations of inverter-based resources, under the impacts of unexpected natural events and cyber-physical attacks. Controller performance and overall system resilience were quantified using data from a comprehensive suite of scenarios, and provided a clear understanding on how to operate and deploy these mitigation strategies.

  • Optimal Control for Fast Frequency Response and Black-Start using Embedded Storages with Grid-Forming Control

    by Quan Nguyen, Richland Pacific Northwest National Laboratory (Pnnl), Xue Lyu, Meng Zhao, Jessica Kerby, Laurentiu Marinovici, Diane Baldwin

  • Open Access

    Experimental Study for Validation of Resilient Response of Controls - Thrust 2 Controls Assessment

    by Laurentiu D. Marinovici, Jan K. Westman, Jeffrey D. Doty, Celina L. Wilkerson, Brett A. Ross, Hannah N. DeSmet, Thomas W. Edgar

    The focus of this project is to design, execute, and analyze experiments around resilience response. As part of the Resilience through Data-Driven, Intelligently Designed Control (RD2C) initiative, this project builds upon the previously designed control algorithms and experiments. It designs detailed uses cases to test RD2C-developed mitigation schemes in specific realistic scenarios, analyze and save the measurement data sets. Having a high-confidence and consistent data set is crucial for identifying relevant metrics to describe the system resilience in specific real-life-like scenarios of power grid operation.

  • Distributed Coordination of Networked Microgrids for Voltage Support in Bulk Power Grids

    by Nathan Gray, Rabayet Sadnan, Anjan Bose, Anamika Dubey, Thanh Long Vu, Jing Xie, Laurentiu D. Marinovici, Kevin P. Schneider, Cecilia Klauber, Wei Trinh

    The increasing deployment of distributed energy resources (DERs) and microgrids (MGs) in power distribution systems has enabled the adjustment of reactive power consumption as seen at the substation, which can be used to provide voltage support for the bulk power system (BPS). Leveraging this new capability will provide greater resiliency to the power system as a whole. The goal of this paper is to develop and compare three different algorithms, namely distributed optimal power flow, distributed consensus algorithm, and fully decentralized collaborative autonomy for unbalanced distribution systems for microgrid coordination. These algorithms use networked MGs to support the BPS voltage when a contingency at the bulk grid results in abnormally low voltages, which may be a precursor to voltage collapse. Our comparative analysis includes both qualitative and quantitative assessments of the three algorithms and a discussion of the trade-offs between the decentralized and distributed methods in normal and disrupted conditions. Each algorithm was evaluated on the modified IEEE 13-bus system and a real power distribution system in North America that encompasses more than 4500 buses. Each algorithm excels differently and may be suited for different scenarios depending on the condition, operations, and priorities of the power and communication systems.


  • Incentive Control Signals to Support Resilient Distribution System Operations

    by L. Marinovici, B. Bhattarai, M. Mukherjee, K. P. Schneider, J. Xie, W. Du, F. B. Dos Reis

    Reconfiguring power distribution after an outage is commonly performed to restore service to the maximum number of end-use customers. However, the ability to reconfigure the system can be constrained due to voltage and thermal limits on equipment. This paper presents two transactive approaches that can be deployed to increase operational flexibility through mitigation of local constraints (voltage and thermal) by engaging the reactive-power capabilities of non-utility resources to increase the number of switching options and load restoration. The first approach enables energizing additional line segments, and the second approach enables reducing the voltage differential across reclosers enabling additional switching options. The developed methods are demonstrated on a model of an operational 12.47-kV distribution system with four distribution circuits and 3000+ electrical nodes. Simulations are conducted using the Hierarchical Engine for Large-scale Infrastructure Co-Simulation (HELICS)-based framework to evaluate the effectiveness of the two methods to improve system reconfiguration. The performance of the developed transactive algorithms is evaluated under a range of operating conditions, including both normal and outage conditions. The proposed transactive approaches resulted in additional switching options for the distribution system operator, which, in-turn, yielded to an increase in additional load restored thereby improving the resiliency of the distribution system.


  • Citadels Final Report (GMLC 2.2.1: Citadels)

    by Grid Modernization Laboratory Consortium (GMLC), Kevin P. Schneider, Jim Glass, Cecilia Klauber, Ben Ollis, Matthew Reno, Anamika Dubey, Michael Burck, Jing Xie, Lorin T. Wall, et al.

    This is the final project report for the Grid Modernization Laboratory Consortium (GMLC) Resilient Distribution System (RDS) Citadels project. The primary goal of this GMLC project was to increase the operational flexibly of power systems by engaging microgrids distributedly, coordinated using consensus algorithms. The primary goal was successfully achieved. The primary goal was divided into three areas: Implement peer-to-peer control between microgrid controllers using the Open Field Message Bus (OpenFMB) approach; Develop and implement consensus algorithms on commercially available hardware that allows a group of microgrids to distributedly implement operational controls; Develop the architectures and controls to enable groups of microgrids to coordinate their operations to support the bulk power system during abnormal events, and end-use loads in the event the bulk power systems fail.


  • Open Access

    Scalable Resilience Analysis Through Power Systems Co-Simulation

    by Tyler Phillips, Laurentiu D. Marinovici, Craig Rieger, Alice Orrell

    The ability to robustly characterize transmission and distribution grid resilience requires the ability to perform time-scale analysis that interweaves communications, control, and power contributions. This consideration is important to ensuring an understanding of how each individual aspect can affect the resulting systemic resilience. The combination of co-simulation of these time-based characteristics and a resilience-specific metric provides a likely method to inform both design planning and implementation/operational goals to ensure resilience in power systems. The Microgrids, Infrastructure Resilience, and Advanced Controls Launchpad co-simulation platform (MIRACL-CSP) has been developed to allow the modular integration of power grid models with control and metrics applications. This paper introduces MIRACL-CSP as a fundamental platform to study and improve the resilient operation of a microgrid. It offers a holistic investigation environment for systemically comparing the cyber-physical resilience to natural and manmade events. We emphasize the importance/advantage of intertwining the distribution system simulator GridLAB-D with the Power Distribution Designing for Resilience (PowDDeR) application to analyze the resilience of the St. Mary’s microgrid in Alaska. The resilience is evaluated in both short-term (frequency stability) and long-term (energy constrained) metrics. The results of the analysis of the St. Mary’s microgrid show that there is a trade-off between the two. As inertia-based generation assets are taken off-line, short-term resilience drops. However, the long-term resilience is retained longer as less fuel is being used.


  • Open Access

    Communication System Modeling in Transactive Systems

    by Trevor D. Hardy, Laurentiu D. Marinovici, James P. Ogle, Frederick C. Rutz

    This report reviews the automated communication model capability developed for TESP and challenges in modeling communication systems well for transactive systems analysis

  • Open Access

    MIRACL Co-Simulation Platform Lab assets and tools integration

    by Laurentiu D. Marinovici, Tyler Phillips, Craig Rieger, Alice C. Orrell, Bishnu P. Bhattarai, Shiva Poudel, Partha S. Sarker, Jacob Lehmer

    Pacific Northwest National Laboratory's (PNNL) co-simulation platform (CSP) for the Microgrids, Infrastructure Resilience, and Advanced Controls Launchpad (MIRACL) project, also known as MIRACL-CSP, is a functional layer designed and developed to oversee the operational exchanges of data at the application level to and from different resources residing on the MIRACL Data Hub shared platform. MIRACL-CSP allows virtual interactions between various data hub resources during co-simulation runtime

  • Open Access

    Prototypical communication systems for electrical distribution system analysis: Design basis and exemplification through co‐simulation

    by Bishnu Bhattarai, Laurentiu Marinovici, Francis Tuffner, Kevin Schneider, Xiaoyuan Fan, Frederick Rutz, Gowtham Kandaperumal

    This paper develops prototypical communication system (PCS) models to support the analysis of electric distribution systems dependency on communication. Though there exist representative and prototypical distribution test systems, i.e., IEEE test feeders and the taxonomy of prototypical feeders, there are no standard definitions of communication systems appropriate for studies of system interdependence. To accurately represent the impact communication systems have on electric distribution system operations, the paper introduces the design basis for developing PCS models highlighting key characteristics of communication systems architectures and commonly‐deployed technologies. It follows with functional definitions, implementations, and an example of how PCSs can be used for system analysis. The approach leverages existing open‐source modeling and simulation tools. Co‐simulation is achieved with ns‐3 for PCSs, GridLAB‐D\textsuperscript{\texttrademark} for distribution systems, and Python\textsuperscript{\texttrademark} for distribution system control centers. The Hierarchical Engine for Large‐Scale Infrastructure Co‐simulation (HELICS) environment is used to federate these individual simulators. It allows for different PCSs to be integrated with distribution systems and analyzed in different scenarios. This underlines the importance of correctly identifying network topologies and technologies and their impact on the system control strategies. Though this work uses specific tools development and implementation, the PCS models can be used in other simulation environments.