Jose Luis Cercos-Pita
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jose Luis Cercos-Pita has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Antonio Souto-Iglesias
CEHINAV, DACSON, ETSIN, Universidad Politécnica de Madrid (UPM), Madrid, Spain
7 shared publications - Daniel Duque
Departamento de Física Teórica de la Materia Condensada (C-V), Universidad Autónoma de Madrid, E-28049 Madrid, Spain
5 shared publications - Andrea Colagrossi
Institute of Marine Engineering
4 shared publications - Javier Calderon-Sanchez
DACSON, ETSIN, CEHINAV, Universidad Politécnica de Madrid (UPM), 28040 Madrid, Spain
3 shared publications Leo M. González
3 shared publicationsA. Souto-Iglesias
2 shared publications
Latest Publications
- Open Access
Exploring Ventilator-Induced Lung Injury: A Comprehensive Ex-Vivo Study Using Phase-Contrast MicroCT and Atomic Force Microscopy
Mechanical ventilation (MV) can induce or exacerbate ventilator-induced lung injury (VILI), particularly in mechanically heterogeneous lungs with pre-existing injury. We investigated VILI in a rat model of bleomycin-induced lung injury and compared it with healthy controls using a combined in-vivo and ex-vivo imaging approach. Previously acquired in-vivo data from four-dimensional (4D) phase-contrast synchrotron micro-computed tomography (microCT) and forced oscillation measurements showed increased lung elastance and reduced local acinar strain in bleomycin-induced injured lungs at baseline and after injurious MV. To identify structural and mechanical correlates, we performed automated three-dimensional (3D) pore analysis and atomic force microscopy (AFM) on formalin-fixed, paraffin-embedded lung tissue, complemented by histology and spatial co-registration. Ex-vivo analysis revealed pronounced airspace enlargement after injurious MV of healthy lungs, whereas this effect was attenuated in fibrotic lungs. AFM demonstrated region-specific mechanical responses, and correlation analyses linked pore geometry and nanoscale stiffness to in-vivo lung mechanics. Spatial analysis further showed colocalization of VILI-associated airspace damage with injured regions. Overall, extracellular matrix remodelling modifies the lung’s mechanical response to injurious MV. This multiscale correlative approach provides mechanistic insight into the interplay between lung injury and VILI and informs ventilation strategies in structurally altered lungs.
Open AccessExploring Ventilator-Induced Lung Injury: A Comprehensive Ex-Vivo Study Using Phase-Contrast MicroCT and Atomic Force Microscopy
Mechanical ventilation (MV) can induce or exacerbate ventilator-induced lung injury (VILI), particularly in mechanically heterogeneous lungs with pre-existing injury. We investigated VILI in a rat model of bleomycin-induced lung injury and compared it with healthy controls using a combined in-vivo and ex-vivo imaging approach. Previously acquired in-vivo data from four-dimensional (4D) phase-contrast synchrotron micro-computed tomography (microCT) and forced oscillation measurements showed increased lung elastance and reduced local acinar strain in bleomycin-induced injured lungs at baseline and after injurious MV. To identify structural and mechanical correlates, we performed automated three-dimensional (3D) pore analysis and atomic force microscopy (AFM) on formalin-fixed, paraffin-embedded lung tissue, complemented by histology and spatial co-registration. Ex-vivo analysis revealed pronounced airspace enlargement after injurious MV of healthy lungs, whereas this effect was attenuated in fibrotic lungs. AFM demonstrated region-specific mechanical responses, and correlation analyses linked pore geometry and nanoscale stiffness to in-vivo lung mechanics. Spatial analysis further showed colocalization of VILI-associated airspace damage with injured regions. Overall, extracellular matrix remodelling modifies the lung’s mechanical response to injurious MV. This multiscale correlative approach provides mechanistic insight into the interplay between lung injury and VILI and informs ventilation strategies in structurally altered lungs.
- Open Access
- 13 June 2025
- Published by Elsevier in Ocean Engineering
- Vol. 336
A methodology for CFD simulations of floating structures in waves coupled with mooring dynamics
- 13 June 2025
- Published by Elsevier in Ocean Engineering
- Vol. 336
Open AccessA methodology for CFD simulations of floating structures in waves coupled with mooring dynamics
- Open Access
A geometric formulation of the Shepard renormalization factor
The correct treatment of boundary conditions is a key step in the development of the SPH method. The SPH community has to face several challenges in this regard - in particular, a primordial aspect for any boundary formulation is to ensure the consistency of the operators in presence of boundaries and free surfaces. A new implementation is proposed, based on the existing numerical boundary integrals formulation. A new kernel expression is developed to compute the Shepard renormalization factor at the boundary purely as a function of the geometry. In order to evaluate this factor, the resulting expression is split into numerical and analytical parts, which allows accurately computing the Shepard factor. The new expression is satisfactorily tested for different planar geometries, showing that problems featuring free surfaces and boundaries are solved. The methodology is also extended to 3-D geometries without great increase in computational cost.
Open AccessA geometric formulation of the Shepard renormalization factor
The correct treatment of boundary conditions is a key step in the development of the SPH method. The SPH community has to face several challenges in this regard - in particular, a primordial aspect for any boundary formulation is to ensure the consistency of the operators in presence of boundaries and free surfaces. A new implementation is proposed, based on the existing numerical boundary integrals formulation. A new kernel expression is developed to compute the Shepard renormalization factor at the boundary purely as a function of the geometry. In order to evaluate this factor, the resulting expression is split into numerical and analytical parts, which allows accurately computing the Shepard factor. The new expression is satisfactorily tested for different planar geometries, showing that problems featuring free surfaces and boundaries are solved. The methodology is also extended to 3-D geometries without great increase in computational cost.
- 18 October 2024
- Published by Elsevier in Computers & Fluids
- Vol. 285
Boundary conditions for SPH through energy conservation
- 18 October 2024
- Published by Elsevier in Computers & Fluids
- Vol. 285
Boundary conditions for SPH through energy conservation
- 8 April 2024
- Published by Elsevier in Ocean Engineering
- Vol. 303
CFD simulation of multiple moored floating structures using OpenFOAM: An open-access mooring restraints library
- 8 April 2024
- Published by Elsevier in Ocean Engineering
- Vol. 303
CFD simulation of multiple moored floating structures using OpenFOAM: An open-access mooring restraints library
- 14 September 2022
- Published by Elsevier in European Journal of Mechanics - B/Fluids
- Vol. 97, 78-92
The role of time integration in energy conservation in Smoothed Particle Hydrodynamics fluid dynamics simulations
- 14 September 2022
- Published by Elsevier in European Journal of Mechanics - B/Fluids
- Vol. 97, 78-92
The role of time integration in energy conservation in Smoothed Particle Hydrodynamics fluid dynamics simulations
- 12 July 2020
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 16 (8) , 879-891
CFD computation of the hydrodynamic torque due to free-surface antiroll tanks with 3D dynamics
The aim of this work is to simulate the complex 3D hydrodynamics inside free-surface anti-roll tanks with obstacles and side sub-compartments. The case studies comprise a rectangular tank, a tank with a C-shaped section and a rectangular tank with baffles, for which experimental results are provided. The simulations have been performed for 3 and 6 degrees of roll, and for various filling levels. The Open Source Computational Fluid Dynamics (CFD) tool OpenFOAM has been used to carry out the simulations. Various turbulence models and boundary condition implementations have been used. It is shown in the paper that the k-ω SST model with slip boundary condition is the one that provides the best trade-off between accuracy and computational efficiency. In order for present results to be easily reproducible, the simulations files, also including the geometrical ones, are provided as supplementary material.
- 12 July 2020
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 16 (8) , 879-891
CFD computation of the hydrodynamic torque due to free-surface antiroll tanks with 3D dynamics
The aim of this work is to simulate the complex 3D hydrodynamics inside free-surface anti-roll tanks with obstacles and side sub-compartments. The case studies comprise a rectangular tank, a tank with a C-shaped section and a rectangular tank with baffles, for which experimental results are provided. The simulations have been performed for 3 and 6 degrees of roll, and for various filling levels. The Open Source Computational Fluid Dynamics (CFD) tool OpenFOAM has been used to carry out the simulations. Various turbulence models and boundary condition implementations have been used. It is shown in the paper that the k-ω SST model with slip boundary condition is the one that provides the best trade-off between accuracy and computational efficiency. In order for present results to be easily reproducible, the simulations files, also including the geometrical ones, are provided as supplementary material.
- 1 April 2019
- Published by Elsevier in Computers & Fluids
- Vol. 183, 16-27
A geometric formulation of the Shepard renormalization factor
- 1 April 2019
- Published by Elsevier in Computers & Fluids
- Vol. 183, 16-27
A geometric formulation of the Shepard renormalization factor
- 1 March 2018
- Published by Elsevier in Ocean Engineering
- Vol. 152, 353-376
Co-simulation of ship motions and sloshing in tanks
- 1 March 2018
- Published by Elsevier in Ocean Engineering
- Vol. 152, 353-376
Co-simulation of ship motions and sloshing in tanks
- 1 February 2018
- Published by Elsevier in Computer Physics Communications
- Vol. 223, 55-68
NASAL-Geom, a free upper respiratory tract 3D model reconstruction software
- 1 February 2018
- Published by Elsevier in Computer Physics Communications
- Vol. 223, 55-68
NASAL-Geom, a free upper respiratory tract 3D model reconstruction software