CGClara Sangrós Giménez

Clara Sangrós Giménez

*This is an algorithmically generated author record based on publicly available information.

Clara Sangrós Giménez has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Electrochemical Modelling of Na-MCl2 Battery Cells Based on an Expanded Approximation Method

    by Nils Büttner, Foelke Purr, Clara Sangrós Giménez, Maria Richter, Laura Nousch, Sabrina Zellmer, Alexander Michaelis

    Battery models are mathematical systems that aim to simulate real battery cell sufficiently accurately. Finding a comprise between complexity, computational effort and accuracy is thereby key. In particular, modelling sodium–nickel–chloride/iron-chloride cells (Na-NiCl2/FeCl2), as a promising alternative for stationary energy storage, bears some challenges. The literature shows a few interesting approaches, but in most of them the second active material (NiCl2 or FeCl2) or the entire discharging/charging cycle is not considered. In this work, an electrochemical and thermal model of Na-NiCl2/FeCl2 battery cells is presented. Based on an equivalent circuit approach combined with electrochemical calculations, the hybrid model provides information on the performance of the cell for charging and discharging with a constant current. By dividing the cathode space into segments, internal material and charge flows are predicted, allowing important insights into the internal cell processes. Besides a low calculation effort, the model also allows a flexible adaption of cathode composition and cell design, which makes it a promising tool for the development of single battery cells as well as battery modules and battery systems.


  • Open Access

    Viscosity Model for Nanoparticulate Suspensions Based on Surface Interactions

    by Benedikt Finke, Clara Sangrós Giménez, Arno Kwade, Carsten Schilde

    In this paper, a widely mechanistic model was developed to depict the rheological behaviour of nanoparticulate suspensions with solids contents up to 20 wt.%, based on the increase in shear stress caused by surface interaction forces among particles. The rheological behaviour is connected to drag forces arising from an altered particle movement with respect to the surrounding fluid. In order to represent this relationship and to model the viscosity, a hybrid modelling approach was followed, in which mechanistic relationships were paired with heuristic expressions. A genetic algorithm was utilized during model development, by enabling the algorithm to choose among several hard-to-assess model options. By the combination of the newly developed model with existing models for the various physical phenomena affecting viscosity, it can be applied to model the viscosity over a broad range of solids contents, shear rates, temperatures and particle sizes. Due to its mechanistic nature, the model even allows an extrapolation beyond the limits of the data points used for calibration, allowing a prediction of the viscosity in this area. Only two parameters are required for this purpose. Experimental data of an epoxy resin filled with boehmite nanoparticles were used for calibration and comparison with modelled values.


  • Open Access

    Modeling the Electrical Conductive Paths within All‐Solid‐State Battery Electrodes

    by Clara Sangrós Giménez, Laura Helmers, Carsten Schilde, Alexander Diener, Arno Kwade

    All‐solid‐state batteries constitute a very promising energy storage device. Two very important properties of these battery cells are the ionic and the electrical conductivity, which describe the ion and the electron transport through the electrodes, respectively. In this work, a numerical method is presented to model the electrical conductivity, considering the outcome of discrete‐element method simulations and the intrinsic conductivities of both the active material particles and the conductive additive particles. The results are calibrated and validated with the help of experimental data of real manufactured electrodes. The tortuosity, which strongly influences the ionic conductivity, is also presented for the analyzed electrodes, taking their microstructure into account.


  • Mechanical, Electrical, and Ionic Behavior of Lithium‐Ion Battery Electrodes via Discrete Element Method Simulations

    by Clara Sangrós Giménez, Carsten Schilde, Linus Froböse, Stoyan Ivanov, Arno Kwade

    Herein, a discrete element method (DEM) approach is proposed to investigate the impact of the calendering process on the electrical and ionic conductivities and on the adhesion strength of Li[Ni1/3 Mn1/3 Co1/3]O2 (NMC)‐based electrodes. For this purpose, key correlations between the microstructure and these electrode‐scale properties are established using the outcomes of the simulations and real experiments. In addition, the evolution of the structure and the development of mechanical stress are also studied numerically during electrochemical cycling, offering a closer insight into the intercalation mechanism. Finally, the impact of the initial noncalendered porosity on the electrode mechanical response is examined, showing that higher initial porosities lead to lower final porosities under same calendering loads. Overall, this work demonstrates the potential of DEM simulations in improving the understanding of the microstructure and mechanics of lithium‐ion electrodes.


  • Open Access

    Effect of Microstructure on Thermal Conduction within Lithium‐Ion Battery Electrodes using Discrete Element Method Simulations

    by Clara Sangrós, Carsten Schilde, Arno Kwade

    Heat transfer within lithium‐ion‐battery electrodes constitutes an important issue regarding not only battery performance but also safety aspects. The objective of this study is to gain insight into the thermal behavior of particles forming lithium‐ion electrodes to understand the effect of microstructural parameters on heat conduction and, ultimately, improve electrode design. To this end, a discrete element method (DEM) approach is proposed in which a contact model is included. Thus, individual particles are modelled within the electrode and their temperature values are tracked just after the copper substrate, on which the particles are coated, is heated from 273 to 350 K. Furthermore, by adjusting numerous simulations with different structural parameters, namely porosity, particle size, and electrode thickness, the effect of these parameters on the heating rate is investigated.