JLJaesung Lee

Jaesung Lee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jaesung Lee has a total of 110 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Highly stable diamagnetically levitated mechanical resonators with large masses exceeding 1.5 gram

    by Pooja Roy, Samira Yasmin, Yunong Wang, Philip X.-L. Feng, Jaesung Lee

    We present resonant mechanical systems that exploit diamagnetic levitation to eliminate clamping loss and achieve high quality factors at room temperature, toward enabling precision sensing applications. By engineering centimeter-scale composite plates formed by dispersing graphite microparticles in insulating epoxy and levitating them above arrayed permanent magnets, we demonstrate stable, full levitation of composite devices with masses exceeding 1.5 grams. Simulations and experimental measurements confirm stable three-dimensional trapping. Suppression of eddy current damping allows the levitated resonators to reach quality factors exceeding 32,000 in moderately high vacuum (∼25 µTorr) at room temperature. Residual velocity measurements and closed-loop frequency tracking using a phase-locked loop reveal near-zero passive motion and exceptional frequency stability, with Allan deviation down to 1.5 × 10−6 at 20 s averaging time, demonstrating excellent stability of the levitation system. Furthermore, the devices can readily operate as sensitive magnetometers. These findings position levitated graphite composite plates as a scalable, low-dissipation candidate platform for next-generation inertial sensors and high-performance resonant systems.


  • Multimode tunable atomically thin vibrating-channel-transistor resonators with ultra-efficient electromechanical transduction

    by Rui Yang, Jaesung Lee, Philip X.-L. Feng

    Transistors based on two-dimensional (2D) semiconductors have emerged as promising candidates for ultra-scaled computing devices. By suspending the 2D channels and inducing mechanical resonance modes in the 2D semiconducting membranes, they form 2D vibrating-channel-transistor (VCT) resonators with ultralow power consumption. Yet on-chip electronic detection and tuning of multimode resonances in these 2D VCT resonators have been challenging due to the ultrasmall vibration amplitudes and rich multimode dynamics at radio frequencies (RF). Here, we leverage the atomic-scale thickness, ultrahigh strain limit, as well as strain-engineering effects on band structure and carrier mobility of 2D molybdenum disulfide (MoS2) sheets, and experimentally demonstrate multimode 2D MoS2 VCT resonators. Using all-electronic signal transduction, we show single-, bi-, and tri-layer MoS2 VCT resonators with up to the 14th resonance mode, thanks to the ultra-efficient electromechanical transduction enabled by internal multiphysics coupling. Measured gate dependency of multimode resonances exhibits frequency tuning ranges of Δf/f0 up to 326%. These 2D VCT resonators provide a unique platform for engineering on-chip integrated and ultra-scaled RF signal transduction, sensing, and analog computing elements with multimode and hyperspectral capabilities.


  • Temperature Compensated Graphene Nanomechanical Resonators

    by Jaesung Lee, Hsin‐Ying Chiu, Liang Zhao, Jie Shan, Philip X.‐L. Feng

    We report the experimental demonstration of temperature compensated bilayer graphene two‐dimensional (2D) nanomechanical resonators operating in temperature range of 300 to 480 K. By using both microspectroscopy and scanning spectromicroscopy techniques, spatially visualized undriven thermomechanical motion is conveniently used to monitor both the resonance frequency and temperature of the device via noise thermometry while the device is photothermally agitated. Thanks to engineerable naturally integrated temperature compensation of the graphene and gold clamps that minimize variations of built‐in tension in a wide temperature range, very small linear TC f s of ≈−39 and −84 ppm K −1 are achieved in the graphene nanomechanical resonators. The measured TC f s are orders of magnitude smaller than those in other 2D resonant nanoelectromechanical systems (NEMS). The intricately coupled thermal tuning and strain effects are further examined, elucidating that TC f can be further improved by optimizing device dimensions, which can be exploited for engineering highly stable NEMS resonators and oscillators for signal transduction and sensing applications.


  • Single-Crystal Silicon Thermal-Piezoresistive Resonators as High-Stability Frequency References

    by Connor A. Watkins, Jaesung Lee, Jonathan P. McCandless, Harris J. Hall, X.-L. Feng Philip

    This paper reports on single-crystal silicon (Si) thermal-piezoresistive resonators (TPRs) achieving $\sim$ 0.2ppb-level frequency stability in phase-locked loop (PLL) measurements. A pair of resonators operating in a balanced-bridge configuration is presented, with one device being driven at resonance and the other used to null the parasitic background responses. The resonance frequency of the driven TPR has been measured over 40 hours with closed-loop continuous tracking by PLL and yields an Allan deviation $\sigma_{\text{A}} \approx 2.66$ ppb at an averaging time of $\tau \approx 4.95$ s which is the best reported value among all Si TPRs studied to date. Further, an external DC power feedback loop is implemented alongside the PLL to enhance the frequency stability of the TPR, to achieve $\sigma_{\text{A}} \approx 0.236$ ppb at $\tau \approx 1.2$ s, the best short-term frequency stability among all reported Si MEMS counterparts. This result suggests that such TPRs with precise DC control can potentially achieve frequency stabilities comparable to, or better than, existing state-of-the-art resonators used in oscillator circuits, with significantly reduced external thermal control requirements and power demands. 2024-0121


  • Open Access

    A Study on Improving the Shape Error of the Lower Mold of Free-Form Concrete Panels Using Magnetic Force

    by Jihye Kim, Jongyoung Youn, Minje Jo, Kyeongtae Jeong, Jaesung Lee, Donghoon Lee

    FCPs (free-form concrete panels) can be made using reusable and easily customizable silicone molds tailored to the unique shape of each panel. CNC (Computer Numerical Control)-type rods move vertically to press the silicone plate and shape the lower curved surface. Silicone caps are attached to the ends of the rods to facilitate the formation of smooth curves. However, there is currently no fixing method for the silicone caps and the silicone plate, which makes them vulnerable to the lateral pressure exerted during concrete pouring. Therefore, the current study used magnetic force to improve the lower shape of free-form molds. To this end, a neodymium silicone cap was designed by adding a neodymium magnet to the upper surface of the silicone cap. Moreover, two types of silicone plates were developed for fixing: one type is IS-LSM (Iron Sheet–Silicone Mold), which includes an iron sheet, while the other type is IP-LSM (Iron Powder–Silicone Mold), which is made by mixing iron powder. To verify these two techniques, FCP manufacturing experiments were conducted. The experimental results indicated that IS-LSM had a broader error range than existing techniques, thus rendering it unusable, while IP-LSM yielded significant values. Consequently, a t-test was conducted to validate the data for IP-LSM at 30%, 50%, and 70%, and it was confirmed that the difference in error data was significant at a 95% confidence level. Future research in this area should investigate the addition of iron powder to the silicone plate and a side fixing method for the silicone mold. Such research would help advance the production technology of free-form concrete panels.


  • Open Access

    3C-SiC phononic waveguide for manipulating mechanical wave propagation

    by Jaesung Lee, Yanan Wang, Christian A. Zorman, Philip X.-L. Feng

    We present experimental demonstration and modeling of mechanical wave propagation in a quasi-one-dimensional (quasi-1D) phononic crystal (PnC) waveguide (WG) constructed from a periodic array of single-crystal cubic-silicon carbide (3C-SiC) coupled micromechanical resonators, with an exceptional dynamic range exceeding 92 dB. The PnC design comprises 50 periodic cells, enabling the propagation of flexural mechanical waves in high-frequency and very-high-frequency bands, featuring a broad PnC bandgap spanning approximately 24–27.5 MHz. Furthermore, the 3C-SiC PnC WG exhibits excellent characteristics, including a high group velocity of 350 m/s and a low transmission loss of 0.69 dB/mm, enabling efficient guidance and support for mechanical waves across extended distances before reaching the noise level of the device. These attributes of the PnC WG, as demonstrated in this study, may open possibilities for the development of device platforms with applications in on-chip signal processing, sensing, and quantum transducer technologies.


  • Open Access

    Unlocking the Potential of Digital Twins in Construction: A Systematic and Quantitative Review Using Text Mining

    by Jisoo Park, Jae-Kang Lee, Min-Jae Son, Chaeyeon Yu, Jaesung Lee, Sungjin Kim

    The construction industry has been trying to enhance the level of digitalization and autonomy by adopting various communication and information technologies (ICT), e.g., augmented reality (AR), virtual reality (VR), robotics, drones, or building information modeling (BIM). However, improvement of the safety and productivity in their domains is still a struggle. One of the main reasons for failing to accelerate their digital transformation is ignoring the deep understanding of the concept of digital twin, its usage, and the potential benefits of digital twins in the construction industry. Therefore, this paper investigated the impacts and potentials of digital twins on the construction industry through a quantitative systematic review assisted by the text mining method. The study presented the potential usability of digital twins, leading and core technologies, and applications, revealing their benefits and potential for optimizing project planning, execution, and management process. Through this comprehensive literature review, this study elucidated the distinctive features, advantages, and immense potential that digital twins bring to the construction field. The findings highlight the transformative impact of digital twins, providing critical insights for their broader adoption and groundbreaking applications in the industry. By addressing the challenges of adopting this technology, the article provided valuable insights for advancing research and the broad implementation of digital twins in the sector.


  • Open Access

    Perspectives on phononic waveguides for on-chip classical and quantum transduction

    by Yanan Wang, Jaesung Lee, Philip X.-L. Feng

    Phononic waveguides (PnWGs) are devices with rationally designed periodic structures to manipulate mechanical oscillations and to engineer and control the propagation of acoustic waves, thus allowing for frequency and band selection of wave transmission and routing, promising for both classical and quantum transduction on chip-scale platforms with various constituent materials of interest. They can be incorporated into both electromechanical and optomechanical signal transduction schemes. Here, we present an overview of emerging micro/nanoscale PnWGs and offer perspectives for future. We evaluate the typical structural designs, frequency scaling, and phononic band structures of the PnWGs. Material choices, fabrication techniques, and characterization schemes are discussed based on different PnWG designs. For classical transduction schemes, an all-phononic integrated circuit perspective is proposed. Toward emerging quantum applications, the potential of utilizing PnWGs as universal interfaces and transduction channels has been examined. We envision PnWGs with extraordinary propagation properties, such as nonreciprocity and active tunability, can be realized with unconventional design strategies (e.g., inverse design) and advanced materials (e.g., van der Waals layered crystals), opening opportunities in both classical and quantum signal transduction schemes.


  • Five Low-Noise Stable Oscillators Referenced to the Same Multimode AlN/Si MEMS Resonator

    by Tahmid Kaisar, S. M Enamul Hoque Yousuf, Jaesung Lee, Afzaal Qamar, Mina Rais-Zadeh, Soumyajit Mandal, Philip X.-L. Feng

    We report on the first experimental demonstration of five self-sustaining feedback oscillators referenced to a single multimode resonator, using piezoelectric aluminum nitride on silicon (AlN/Si) microelectromechanical systems (MEMS) technology. Integrated piezoelectric transduction enables efficient readout of five resonance modes of the same AlN/Si MEMS resonator, at 10MHz, 30MHz, 65MHz, 95MHz, and 233MHz with quality ( Q ) factors of 18600, 4350, 4230, 2630, and 2138, respectively. Five stable self-sustaining oscillators are built, each referenced to one of these high- Q modes, and their mode-dependent phase noise and frequency stability (Allan deviation) are measured and analyzed. The 10, 30, 65, 95 and 233MHz oscillators exhibit low phase noise of -116, -100, -105, -106 and -92dBc/Hz at 1kHz offset frequency, respectively. The 65MHz oscillator yields Allan deviation of 4×10 -9 and 2×10 -7 at 1s and 1000s averaging time, respectively. The 10MHz oscillator’s low phase noise holds strong promise for clock and timing applications. The five oscillators’ overall promising performance also suggests suitability for multimode resonant sensing and tracking. This work also elucidates mode dependency in oscillator noise and stability, one of the key attributes of mode-engineerable resonators.