MWMusheng Wu

Musheng Wu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Musheng Wu has a total of 73 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Non-blocking grain boundaries for Li-ion transport in Li3YCl6 halide electrolyte

    by Lixin Xiong, Boyi Zhang, Wenwei Luo, Longbing Shang, Bo Xu, Chuying Ouyang, Musheng Wu

    Halide solid electrolytes, exemplified by Li3YCl6 (LYC), offer moderate ionic conductivity (∼1 mS/cm), high oxidative stability (>4 V), and good mechanical deformability, making them promising candidates for solid-state lithium batteries. However, the room-temperature ionic conductivity of single-crystal LYC is nearly one order of magnitude higher than that of experimental polycrystalline samples. Grain boundaries (GBs) are considered the primary cause of this discrepancy. Although GBs critically influence Li-ion transport in most solid electrolytes, the impact in LYC remains poorly understood. Herein, we quantify the contribution of GBs to Li-ion transport in LYC utilizing machine learning driven deep potential molecular dynamics. For all GBs considered, the results reveal a strong inherent tendency toward polycrystallinity in LYC due to low GB formation energies. Although the ionic conductivity of all LYC GBs is lower than that of the bulk, among them, the highest activation energy and the lowest ionic conductivity are 0.246 eV and 8.6 mS/cm, respectively. Moreover, the {303¯2}⟨101¯3¯⟩ GB with the lowest GB energy (0.176 J/m2) exhibits the highest ionic conductivity of 13.9 mS/cm. The simulations demonstrate that GBs hinder overall Li-ion transport compared to the bulk, though GBs do not act as the dominant barrier to Li-ion transport in LYC. This work provides insights for the design of halide solid electrolytes.

  • BATTER-MoE: A Sparse Mixture-of-Experts Model for Accurate and Efficient Remaining Useful Life Prediction of Lithium-Ion Batteries

    by Xuan Yi, Jianmao Xiao, Gang Lei, Xin Hu, Musheng Wu, Bo Xu, Chuying Ouyang

    Accurately estimating the remaining useful life (RUL) of batteries from degradation trajectories is critical for system safety but remains challenging due to the complex and heterogeneous nature of degradation processes. Existing dense predictors achieve strong accuracy but process heterogeneous degradation trajectories through a shared full-capacity pathway, which may limit deployment flexibility in resource-constrained settings due to their computational cost. To address this limitation, we propose BATTER-MoE, a sparse Mixture-of-Experts (MoE) framework that couples battery-oriented temporal representation learning with sparse conditional computation. The framework combines time-aware multi-scale tokenization and cross-scale feature fusion with temporal reweighting, a sparse MoE backbone with RoPE-driven self-attention and a shared expert mechanism, and time-aware pooling for prediction. Experimental results on three public datasets (NASA, GOTION, and TJU), covering different chemistries and capacities, demonstrate that BATTER-MoE achieves competitive performance compared with representative baselines. Across multiple settings, it achieves the best or tied-best MAE/RMSE in most evaluations while maintaining a competitive balance between predictive accuracy and computational cost. This study suggests that sparse conditional computation is a promising direction for battery prognostics when both predictive accuracy and computational efficiency are important.

  • Open Access

    First-Principles Investigation of the Structural Stability and Physical Properties of Lead-Free Ge-Based Halide Perovskites

    by Liang Wang, Longze Li, Jiayin Zhang, Shuying Zhong, Bo Xu, Musheng Wu, Chuying Ouyang

    Inorganic lead halide perovskite semiconductor materials exhibit great potential in the optoelectronic field due to their excellent optical and electrical properties. However, lead toxicity and limited material stability hinder their commercial applications. Consequently, the pursuit of non-toxic, stable alternatives is imperative for the sustainable development of halide-perovskite semiconductors. Non-toxic germanium-based halide perovskites, as promising candidates, have attracted considerable attention. Here, we present a systematic first-principles investigation of the structural, electronic, elastic, and optical properties of cost-effective germanium-based halide perovskites NaGeX3 (X = Cl, Br, I). Energy and phonon-spectrum calculations demonstrate that NaGeX3 with the R3c space group exhibits the highest structural stability, rather than the commonly assumed cubic phase. Hybrid functional calculations reveal that the band gaps of R3c NaGeX3 decrease monotonically with increasing halogen radius, that is, 4.75 eV (NaGeCl3) → 3.76 eV (NaGeBr3) → 2.69 eV (NaGeI3), accompanied by a reduction in carrier effective masses. Additionally, mechanically stable R3c NaGeX3 exhibits lower hardness and ductility than that of the cubic phase. Optical properties indicate that NaGeX3 materials have strong absorption coefficients (>106 cm−1) and low loss in the photon energy range of 9–11 eV, suggesting that such cost-effective germanium-based halide perovskites can be used in various optoelectronic devices in the ultraviolet region.


  • Open Access

    First-Principles Investigation of the Structural Stability and Physical Properties of Lead-Free GE-Based Halide Perovskites

    by Liang Wang, Longze Li, Jiayin Zhang, Shuying Zhong, Bo Xu, Musheng Wu, Chuying Ouyang

    Inorganic lead halide perovskite semiconductor materials exhibit great potential in the optoelectronic field due to their excellent optical and electrical properties. However, lead toxicity and limited material stability hinder their commercial applications. Consequently, the pursuit of non-toxic, stable alternatives is imperative for the sustainable development of halide-perovskite semiconductors. Non-toxic germanium-based halide perovskites, as promising candidates, have attracted considerable attention. Here, we present a systematic first-principles investigation of the structural, electronic, elastic, and optical properties of cost-effective germanium-based halide perovskites NaGeX3 (X=Cl, Br, I). Energy and phonon-spectrum calculations demonstrate that NaGeX3 with R3c space group exhibits the highest structural stability, rather than the commonly assumed cubic phase. Hybrid functional calculations reveal that the band gaps of R3c NaGeX3 decrease monotonically with increasing halogen radius, that is, 4.75 eV (NaGeCl3) → 3.76 eV (NaGeBr3) → 2.69 eV (NaGeI3), accompanied by a reduction in carrier effective masses. Additionally, mechanically stable R3c NaGeX3 exhibits lower hardness and ductility than that with the cubic phase. Optical properties indicate that NaGeX3 materials have strong absorption coefficients (> 106 cm-1) and low loss in the photon energy range of 9-11 eV, suggesting that such cost-effective germanium-based halide perovskites can be used in various optoelectronic devices in the ultraviolet region.

  • Critical role of dynamic structure on ion migration in H2V2O5 cathode material for rechargeable batteries

    by Lei Xu, Jing Shi, Dong Jin, Peng Liu, Baozhen Sun, Shuying Zhong, Musheng Wu, Bo Xu, Chuying Ouyang

    Understanding ionic migration mechanisms in solid-state materials is of paramount importance for advancing rechargeable batteries technologies. Combining first-principle calculations and ab initio molecular dynamics (MD) simulations, we reveal a novel mechanism of ionic migration in 3D tunnel-type H2V2O5, a newly developed cathode material formed by proton pre-intercalated α-V2O5, where hydrogen bonds dynamic play a critical regulatory role. We demonstrate the rotation behavior of –OH groups and the synergistic coupling between the –OH rotation and divalent ion migration in H2V2O5. The paddle-wheel mechanism, as we referred to here, enables ultralow migration barriers (Eb) of 0.56 eV for Zn2+ and 0.44 eV for Mg2+. In a sharp contrast, this mechanism was not observed for monovalent cations (such as Li+) using the climbing image nudged elastic band (NEB) method, which yields Eb of 0.57 eV. However, by MD simulations, we obtained the activation energy Ea of 0.23 eV for Li+ migration. The discrepancy was found to lie in the paddle-wheel mechanism, which needs to be activated at elevated temperature (≥150 K) for Li+ migration and, therefore, cannot be captured in NEB calculation at 0 K. Our results thus highlight the importance of understanding the paddle-wheel mechanism, meanwhile, the potential of proton pre-intercalated α-V2O5 for cathode materials of both monovalent and divalent ion batteries.


  • Origin of high ionic conductivity in halide solid electrolyte Li3InCl6: Insights from native defects

    by Musheng Wu, Lei Su, Jiaying Zhang, Baozhen Sun, Gang Liu, Bo Xu, Chuying Ouyang

    Halide solid electrolyte Li3InCl6 (LIC) is a promising candidate for all-solid-state lithium-ion batteries due to its high conductivity and moisture stability. Despite its potential, the reproducible synthesis of high-conductivity LIC remains challenging due to the unknown effect of native defects on ionic conductivity. We investigate native defects and explore the impact of defects on the ion conductivity of LIC using density functional theory and ab initio molecular dynamics simulations. It is found that, on the one hand, the high conductivity in experimental LIC benefits from the dominant defects of Li vacancies (VLi) and interstitials (Lii), on the other hand, the conductivity induced by the two major defects is nearly an order magnitude higher than the experimental values, indicating the cooperative effect of minor defects. Following this, a mixed-defect system with the coexistence of VLi, Lii as well as minor defects Cl vacancies (VCl) and antisites (InLi) is proposed, which presents an activation energy of 0.31 eV and ionic conductivity of 1.8 mS/cm (300 K), well explaining the experimental results. These findings provide important insight into understanding the effect of native defects on ionic transport in LIC and offer synthesis principles for the reproducibility of LIC-type solid electrolytes with high conductivity.


  • Analyzing the capacity fading mechanism in high-capacity Cr8O21 as a cathode material for Li-ion batteries

    by Baozhen Sun, Yi Yan, Bo Xu, Haimei Luo, Musheng Wu, Shuying Zhong, Chuying Ouyang

    The capacity fading mechanism of Cr8O21 remains unclear owing to the lack of reliable evidence. To elucidate the source of capacity loss, we investigated the structures, the structural evolution process, and phase transitions of lithiated Cr8O21 (LixCr8O21) using first-principles calculations. On the one hand, we found that LixCr8O21 adopts a sandwich structure at low Li content but exhibits a rock salt-like structure at high Li content. Compared to the sandwich-like LixCr8O21, the rock salt-like LixCr8O21 possesses a reduced volume and, therefore, decreased interstitial Li sites. The rock salt-like LixCr8O21 structure can maximally store 14 Li, less than 4 Li compared to the sandwich structure. Therefore, this structural change from sandwich-like into rock salt-like is a reason for the capacity loss in Cr8O21 in the discharge process. On the other hand, the convex hull and phase diagram demonstrate that the rock salt-like LixCr8O21 is thermodynamically unstable, and a portion of it transforms into active LiCrO2 during the first discharge. However, LiCrO2 is then converted into CrO2, rather than Cr8O21 in the subsequent charge process. This irreversible phase transition (Cr8O21 → LiCrO2 in the discharge process and LiCrO2 → CrO2 in the charge process) is another significant cause for the capacity loss in Cr8O21. This study provides key theoretical evidence for the drastic capacity fading in Cr8O21 and thereby facilitates the future development of high-capacity cathodes for lithium-ion batteries.

  • Analyzing the water stability mechanism in O-type NaLi0.33Mn0.67O2 as a cathode material for sodium-ion batteries

    by Bo Xu, Wenjing Qin, Baozhen Sun, Musheng Wu, Sanqiu Liu

    The moisture-induced instability of the sodium-layered transition metal oxides (NaxTMO2) presents a significant challenge in developing electrode materials for sodium-ion batteries (SIBs). Herein, via first-principles calculations, we investigate the impact of Li substitution on the water stability of O-type NaLi0.33Mn0.67O2 (NLMO). In particular, the processes of H2O decomposition, Na+/H+ exchange reaction, and hydrogen (H) diffusion on NLMO (101), are specifically compared with those on NMO (101). The results demonstrate that H2O can decompose into O and H species at the Mn–Mn bridge site, but into OH and O species at the Na–Na bridge site, suggesting H2O is unstable on both surfaces. Thereafter, Na+/H+ exchange reaction becomes more difficult on NLMO (101), with the values of −2.73/−2.25 eV and −3.45/−2.82 eV in P1/P2 sites for NLMO (101) and NMO (101). Meanwhile, H diffusion on NLMO (101) is also more difficult due to hydrogen resistance from the subsurface to the bulk. The corresponding barriers are 2.17 and 1.63 eV. However for NMO (101), H can penetrate from the surface to the subsurface and continue to the bulk, with the lowest barrier of 0.61 eV (“Path III-12”) and 0.83 eV (“Path I-23”), respectively. The Columbic interaction between H and metal (Li, Mn, and Na) atoms plays a key role in hydrogen resistance. Notably, Li doping can increase the difficulties in the Na+/H+ exchange reaction and H diffusion on NLMO (101). For this reason, NLMO shows stronger water stability compared to NMO. The in-depth understanding of the water stability mechanism of NLMO can facilitate the future development of high-stable cathodes for SIBs.


  • Deep insight on Li interlayer migration in O3-type NaLi1/3Mn2/3O2 as a cathode material for Na-ion batteries

    by Wenjing Qin, Mei Li, Baozhen Sun, Musheng Wu, Sanqiu Liu, Bo Xu

    Layered manganese transition metal oxides, such as NaMnO2, have attracted great interest due to the low cost and high capacity. However, complex phase transitions in NaMnO2 lead to poor cycling stability. The introduction of Li doping has been confirmed to improve the performance of NaMnO2. O3-type NaLi1/3Mn2/3O2 (NLMO), synthesized in 2021, has demonstrated excellent electrochemical performance. Notably, irreversible Li interlayer migration (Li migrates from the transition metal layer to the alkali metal layer) has been observed during cycling, which is related to the electrochemical performance. Therefore, it is crucial to understand the mechanism underlying Li interlayer migration in O3-NLMO. However, the environment of Li interlayer migration on cycling is complex and involves interlayer spacing, Na-ion concentration, the degree of O-ion oxidation, and phase transition. Here, in this work, we utilized the first-principles method to decouple the coupling factors influencing the Li interlayer migration. Through analyzing the impact of the single-factor on Li interlayer migration, we aim to identify the crucial factors affecting this process. Our results show that a decrease in Na-ion concentration and an increase in O-ion oxidation degree promote the Li interlayer migration, while the O–P phase transition suppresses the Li interlayer migration. Interlayer spacing was found to play a less influential role in Li interlayer migration. Our investigations provide effective strategies for the subsequent regulation of Li interlayer migration.


  • Open Access

    Structural and Na-ion diffusion behavior of O3/P3/P2-type NaNi1/3Mn1/3Fe1/3O2 cathode for Na-ion batteries from first-principles study

    by Lei Su, Baozhen Sun, Musheng Wu, Gang Liu, Bo Xu, Chuying Ouyang

    A layered sodium-ion battery cathode, O3/P3/P2-type NaNi1/3Mn1/3Fe1/3O2, has been systematically investigated by first-principles density functional theory to explore the detailed structural and Na-ion diffusion behavior during desodiation. Our results suggest that the (NaO6) spacing is greatest in the P3 phase and lowest in the O3 phase, with the P2 phase exhibiting intermediate spacing. During desodiation, the intermediate stages have a greater (NaO6) spacing than the initial and final stages. The great (NaO6) spacing facilitates the formation of the P3 phase, resulting in the structural evolution of NaxNi1/3Mn1/3Fe1/3O2 from the O3 to the P3 phase at x ≈ 0.59, finally reaching the O3 structure again at x ≈ 0.12. The electronic structure clearly proves that both Ni and Fe are active in O3/P3/P2-type NaxNi1/3Mn1/3Fe1/3O2. Ni2+ is oxidized to Ni3+ as Na content decreases from x = 1 to x = 0.66, then further oxidized to Ni4+ at x = 0.33, and finally, Fe3+ → Fe4+ oxidation occurs at x = 0. In the Na ion diffusion behavior, the order of the barrier is O3 (0.82 eV) > P2 (0.53 eV) > P3 (0.35 eV) at the initial stage, whereas it is O3 (0.53 eV) > P3 (0.21 eV) > P2 (0.16 eV) at a highly desodiated stage. The former can be traced back to the (NaO6) spacing, but the latter is related to the different Na sites. Our results thus provide a factor of the structural evolution and Na ion diffusion barrier by considering (NaO6) width and Na site changes during desodiation.