Ana Alonso Rodríguez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ana Alonso Rodríguez has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Francesca Rapetti
Laboratoire J.A. Dieudonné Université Côte d'Azur, CNRS, Inria Nice France
8 shared publications - Alberto Valli
Dipartimento di Matematica, Università di Trento, 38050 Povo (Trento), Italy
6 shared publications - Jessika Camaño
GIANuC2-Departamento de Matemática y Física Aplicadas, Universidad Católica de la Santísima Concepción
5 shared publications - Salim Meddahi
Department of Mathematics , 16763 Universidad de Oviedo , Oviedo , Asturias , Spain
4 shared publications - Alberto Valli
University of Trento
2 shared publications - Eduardo De Los Santos
Polytechnic School, National University of Asuncion, San Lorenzo, Paraguay
2 shared publications
Latest Publications
- Open Access
- 28 September 2026
- Published by EDP Sciences in ESAIM: Mathematical Modelling and Numerical Analysis
- Vol. 60 (5) , 2417-2447
L p -Based analysis of a mixed FEM with exactly divergence-free magnetic-field for stationary MHD
In this work, we develop an L p -based analysis of a mixed finite element method for the stationary incompressible magnetohydrodynamics (MHD) problem, providing an exactly divergence-free approximation of the magnetic field together with a direct approximation of the electric field. The method is based on introducing the electric field as an additional unknown, leading to a mixed formulation in which the primary magnetic variables are the electric and magnetic fields, together with a Lagrange multiplier enforcing the divergence-free constraint on the magnetic field, while the hydrodynamic variables are the velocity and pressure. The associated Galerkin scheme is constructed by employing lowest-order Nédélec and Raviart–Thomas elements for the electric and magnetic fields, respectively, discontinuous piecewise constants for the Lagrange multiplier, and any inf–sup stable finite element pair for the velocity–pressure approximation, such as the Mini element. The well-posedness of the continuous and discrete problems is established within this L p framework, by means of the Banach–Nečas–Babuška theorem and the Banach fixed-point theorem, under a sufficiently small-data assumption and, for the discrete case, quasi-uniformity of the mesh. Finally, we derive a Céa-type estimate and obtain the corresponding theoretical convergence rates under a minimal regularity assumption.
- 28 September 2026
- Published by EDP Sciences in ESAIM: Mathematical Modelling and Numerical Analysis
- Vol. 60 (5) , 2417-2447
Open AccessL p -Based analysis of a mixed FEM with exactly divergence-free magnetic-field for stationary MHD
In this work, we develop an L p -based analysis of a mixed finite element method for the stationary incompressible magnetohydrodynamics (MHD) problem, providing an exactly divergence-free approximation of the magnetic field together with a direct approximation of the electric field. The method is based on introducing the electric field as an additional unknown, leading to a mixed formulation in which the primary magnetic variables are the electric and magnetic fields, together with a Lagrange multiplier enforcing the divergence-free constraint on the magnetic field, while the hydrodynamic variables are the velocity and pressure. The associated Galerkin scheme is constructed by employing lowest-order Nédélec and Raviart–Thomas elements for the electric and magnetic fields, respectively, discontinuous piecewise constants for the Lagrange multiplier, and any inf–sup stable finite element pair for the velocity–pressure approximation, such as the Mini element. The well-posedness of the continuous and discrete problems is established within this L p framework, by means of the Banach–Nečas–Babuška theorem and the Banach fixed-point theorem, under a sufficiently small-data assumption and, for the discrete case, quasi-uniformity of the mesh. Finally, we derive a Céa-type estimate and obtain the corresponding theoretical convergence rates under a minimal regularity assumption.
- Open Access
- 14 February 2026
- Published by Elsevier in Computers & Fluids
- Vol. 309
On incompressible magnetohydrodynamic equations in terms of differential forms
- 14 February 2026
- Published by Elsevier in Computers & Fluids
- Vol. 309
Open AccessOn incompressible magnetohydrodynamic equations in terms of differential forms
- Open Access
- 6 August 2024
- Published by Springer Nature in Advances in Computational Mathematics
- Vol. 50 (4) , 1-34
Weights for moments’ geometrical localization: a canonical isomorphism
This paper deals with high order Whitney forms. We define a canonical isomorphism between two sets of degrees of freedom. This allows to geometrically localize the classical degrees of freedom, the moments, over the elements of a simplicial mesh. With such a localization, it is thus possible to associate, even with moments, a graph structure relating a field with its potential.
- 6 August 2024
- Published by Springer Nature in Advances in Computational Mathematics
- Vol. 50 (4) , 1-34
Open AccessWeights for moments’ geometrical localization: a canonical isomorphism
This paper deals with high order Whitney forms. We define a canonical isomorphism between two sets of degrees of freedom. This allows to geometrically localize the classical degrees of freedom, the moments, over the elements of a simplicial mesh. With such a localization, it is thus possible to associate, even with moments, a graph structure relating a field with its potential.
- Open Access
- 6 March 2023
- Published by Springer Nature in Advances in Computational Mathematics
- Vol. 49 (2) , 1-31
Using the FES framework to derive new physical degrees of freedom for finite element spaces of differential forms
In this paper, we study a geometric approach for constructing physical degrees of freedom for sequences of finite element spaces. Within the framework of finite element systems, we propose new degrees of freedom for the spaces $\mathcal {P}_{r}{\varLambda }^{k}$ P r Λ k of polynomial differential forms and we verify numerically their unisolvence.
- 6 March 2023
- Published by Springer Nature in Advances in Computational Mathematics
- Vol. 49 (2) , 1-31
Open AccessUsing the FES framework to derive new physical degrees of freedom for finite element spaces of differential forms
In this paper, we study a geometric approach for constructing physical degrees of freedom for sequences of finite element spaces. Within the framework of finite element systems, we propose new degrees of freedom for the spaces $\mathcal {P}_{r}{\varLambda }^{k}$ P r Λ k of polynomial differential forms and we verify numerically their unisolvence.
- 29 November 2022
- Published by Springer Nature
- p. 117-128
Flexible Weights for High Order Face Based Finite Element Interpolation
- 29 November 2022
- Published by Springer Nature
- p. 117-128
Flexible Weights for High Order Face Based Finite Element Interpolation
- 28 November 2022
- Published by Wiley in International Journal of Numerical Modelling: Electronic Networks, Devices and Fields
- Vol. 36 (3)
Construction of a spanning tree for high‐order edge elements
The well‐known tree–cotree gauging method for low‐order edge finite elements is extended to high‐order approximations, within the first family of Nédélec finite element spaces. The key point in this method is the identification of degrees of freedom for edge and nodal finite element spaces, such that the matrix of the gradient operator is the transpose of the all nodes incidence matrix of a directed graph. This is straightforward for low‐order finite elements, and it can be proved that it is still possible in the high‐order case using either moments or weights as degrees of freedom. In the case of weights, a geometrical realization of the graph associated with the gradient operator is very natural. We recall in details the definition of weights and present an algorithm for the construction of a spanning tree of this graph. The starting point of the algorithm is a spanning tree of the graph given by vertices and edges of the mesh (the so‐called global spanning tree, that is the one used in the low‐order case). This global step, interpreted in the high‐order sense, is enriched locally, with a loop over the elements of the mesh, with arcs corresponding to edge, face, and volume degrees of freedom required in the high‐order case.
- 28 November 2022
- Published by Wiley in International Journal of Numerical Modelling: Electronic Networks, Devices and Fields
- Vol. 36 (3)
Construction of a spanning tree for high‐order edge elements
The well‐known tree–cotree gauging method for low‐order edge finite elements is extended to high‐order approximations, within the first family of Nédélec finite element spaces. The key point in this method is the identification of degrees of freedom for edge and nodal finite element spaces, such that the matrix of the gradient operator is the transpose of the all nodes incidence matrix of a directed graph. This is straightforward for low‐order finite elements, and it can be proved that it is still possible in the high‐order case using either moments or weights as degrees of freedom. In the case of weights, a geometrical realization of the graph associated with the gradient operator is very natural. We recall in details the definition of weights and present an algorithm for the construction of a spanning tree of this graph. The starting point of the algorithm is a spanning tree of the graph given by vertices and edges of the mesh (the so‐called global spanning tree, that is the one used in the low‐order case). This global step, interpreted in the high‐order sense, is enriched locally, with a loop over the elements of the mesh, with arcs corresponding to edge, face, and volume degrees of freedom required in the high‐order case.
- Open Access
- 28 September 2022
- Published by Springer Nature in Calcolo
- Vol. 59 (4) , 1-29
Towards nonuniform distributions of unisolvent weights for high-order Whitney edge elements
We propose to extend results on the interpolation theory for scalar functions to the case of differential k-forms. More precisely, we consider the interpolation of fields in $${\mathcal P}^-_r \varLambda ^k(T)$$ , the finite element spaces of trimmed polynomial k-forms of arbitrary degree $$r \ge 1$$ , from their weights, namely their integrals on k-chains. These integrals have a clear physical interpretation, such as circulations along curves, fluxes across surfaces, densities in volumes, depending on the value of k. In this work, for $$k=1$$ , we rely on the flexibility of the weights with respect to their geometrical support, to study different sets of 1-chains in T for a high order interpolation of differential 1-forms, constructed starting from “good” sets of nodes for a high order multi-variate polynomial representation of scalar fields, namely 0-forms. We analyse the growth of the generalized Lebesgue constant with the degree r and preliminary numerical results for edge elements support the nonuniform choice, in agreement with the well-known nodal case.- 28 September 2022
- Published by Springer Nature in Calcolo
- Vol. 59 (4) , 1-29
Open AccessTowards nonuniform distributions of unisolvent weights for high-order Whitney edge elements
We propose to extend results on the interpolation theory for scalar functions to the case of differential k-forms. More precisely, we consider the interpolation of fields in $${\mathcal P}^-_r \varLambda ^k(T)$$ , the finite element spaces of trimmed polynomial k-forms of arbitrary degree $$r \ge 1$$ , from their weights, namely their integrals on k-chains. These integrals have a clear physical interpretation, such as circulations along curves, fluxes across surfaces, densities in volumes, depending on the value of k. In this work, for $$k=1$$ , we rely on the flexibility of the weights with respect to their geometrical support, to study different sets of 1-chains in T for a high order interpolation of differential 1-forms, constructed starting from “good” sets of nodes for a high order multi-variate polynomial representation of scalar fields, namely 0-forms. We analyse the growth of the generalized Lebesgue constant with the degree r and preliminary numerical results for edge elements support the nonuniform choice, in agreement with the well-known nodal case. - Open Access
On the Tree Gauge in Magnetostatics
We recall the classical tree-cotree technique in magnetostatics. (1) We extend it in the frame of high-order finite elements in general domains. (2) We focus on its connection with the question of the invertibility of the final algebraic system arising from a high-order edge finite element discretization of the magnetostatic problem formulated in terms of the magnetic vector potential. With the same purpose of invertibility, we analyse another classically used condition, the Coulomb gauge. (3) We conclude by underlying that the two gauges can be naturally considered in a high order framework without any restriction on the topology of the domain.
Open AccessOn the Tree Gauge in Magnetostatics
We recall the classical tree-cotree technique in magnetostatics. (1) We extend it in the frame of high-order finite elements in general domains. (2) We focus on its connection with the question of the invertibility of the final algebraic system arising from a high-order edge finite element discretization of the magnetostatic problem formulated in terms of the magnetic vector potential. With the same purpose of invertibility, we analyse another classically used condition, the Coulomb gauge. (3) We conclude by underlying that the two gauges can be naturally considered in a high order framework without any restriction on the topology of the domain.
- 24 October 2020
- Published by Springer Nature in Numerical Algorithms
- Vol. 87 (4) , 1613-1634
New degrees of freedom for high-order Whitney approximations of Darcy’s flows
- 24 October 2020
- Published by Springer Nature in Numerical Algorithms
- Vol. 87 (4) , 1613-1634
New degrees of freedom for high-order Whitney approximations of Darcy’s flows
- Open Access
- 12 August 2020
- Published by Springer Nature
- p. 587-597
Small Trees for High Order Whitney Elements
In applied computations the need arises to define, for example, a discrete field with assigned curl or to represent a div-free field in a given discrete space. In the low degree case this need is often fulfilled by employing tree and co-tree techniques. The definition of tree and co-tree is thus revisited here in the frame of high order Whitney element reconstructions. We consider the case of fields that are reconstructed in a contractible polyhedral domain $$\varOmega \in \mathbb R^3$$ , with connected boundary ∂Ω, starting from their weights over suitable “small simplices” in a simplicial mesh $${\mathcal M}$$ of the domain $$\bar \varOmega $$ .- 12 August 2020
- Published by Springer Nature
- p. 587-597
Open AccessSmall Trees for High Order Whitney Elements
In applied computations the need arises to define, for example, a discrete field with assigned curl or to represent a div-free field in a given discrete space. In the low degree case this need is often fulfilled by employing tree and co-tree techniques. The definition of tree and co-tree is thus revisited here in the frame of high order Whitney element reconstructions. We consider the case of fields that are reconstructed in a contractible polyhedral domain $$\varOmega \in \mathbb R^3$$ , with connected boundary ∂Ω, starting from their weights over suitable “small simplices” in a simplicial mesh $${\mathcal M}$$ of the domain $$\bar \varOmega $$ .