Arunasis Chakraborty
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Arunasis Chakraborty has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Swarup Mahato
Indian Institute of Technology Guwahati
5 shared publications Arka Mitra
Department of Civil Engineering, Indian Institute of Technology Guwahati, Guwahati, Assam, India
4 shared publicationsAmit Kumar Rathi
Department of Civil and Infrastructure Engineering, Indian Institute of Technology, Jodhpur, Jodhpur, Rajasthan 342037, India
3 shared publications- M. Mohamed Sajeer
Department of Civil Engineering Indian Institute of Technology Guwahati India
3 shared publications - Sandip Das
Department of Civil Engineering, Indian Institute of Technology Guwahati, Guwahati, India
3 shared publications - Saptarshi Sarkar
Department of Mechanics and Maritime Sciences Chalmers University of Technology Gothenburg Sweden
3 shared publications
Latest Publications
- Open Access
- 6 May 2026
- Published by Elsevier in SSRN Electronic Journal
Condition Assessment of an Open-Web Girder Railway Steel Bridge with Negative Camber Using Strain-Based Hamiltonian Monte Carlo Simulation
Structural deterioration of bridges influences load distribution and compromises performance, affecting safety and long-term serviceability. With this in view, this study aims to assess the in-situ condition of an open-web steel railway bridge with asymmetric negative camber, which imposes a permanent speed restriction. To address this issue, a Hamiltonian Monte Carlo-based model calibration is employed in this paper, utilizing measured bridge responses for tuning. The proposed algorithm uses strain time-history responses across different critical members, unlike traditional Markov Chain or Hamiltonian Monte Carlo algorithms based on modal frequencies. The tuned model is a digital replica of the in-situ bridge for further safety assessment, particularly regarding the load-carrying capacity and stress redistribution due to camber-induced secondary effects. The results demonstrate the impact of negative camber, which significantly alters stress distribution and affects the overall performance of the bridge. It also highlights the rationale for selecting the optimal allowable speed for a bridge under distress rather than the ad hoc measures currently practiced in the railways. The findings offer practical insights for railway authorities, helping refine maintenance strategies and optimize operational safety in aging railway infrastructure.
- 6 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessCondition Assessment of an Open-Web Girder Railway Steel Bridge with Negative Camber Using Strain-Based Hamiltonian Monte Carlo Simulation
Structural deterioration of bridges influences load distribution and compromises performance, affecting safety and long-term serviceability. With this in view, this study aims to assess the in-situ condition of an open-web steel railway bridge with asymmetric negative camber, which imposes a permanent speed restriction. To address this issue, a Hamiltonian Monte Carlo-based model calibration is employed in this paper, utilizing measured bridge responses for tuning. The proposed algorithm uses strain time-history responses across different critical members, unlike traditional Markov Chain or Hamiltonian Monte Carlo algorithms based on modal frequencies. The tuned model is a digital replica of the in-situ bridge for further safety assessment, particularly regarding the load-carrying capacity and stress redistribution due to camber-induced secondary effects. The results demonstrate the impact of negative camber, which significantly alters stress distribution and affects the overall performance of the bridge. It also highlights the rationale for selecting the optimal allowable speed for a bridge under distress rather than the ad hoc measures currently practiced in the railways. The findings offer practical insights for railway authorities, helping refine maintenance strategies and optimize operational safety in aging railway infrastructure.
- 20 April 2026
- Published by SAGE Publications in Journal of Vibration and Control
Reliability-based optimal design of a hybrid base isolator with an MR-TMDI using multi-condition experimentally identified MR damper parameters under non-stationary ground motion
Conventional passive base isolators often experience large displacement demand that require more advanced architecture to ensure safety and serviceability. To reduce this displacement demand, hybrid base isolation system is often prescribed where the passive isolation system is augmented with additional devices, e.g., a tuned mass damper inerter (TMDI) system along with a magneto-rheological (MR) damper in the present study. An inerter is a two-terminal flywheel where the generated force is proportional to the relative acceleration between its two ends, while a MR damper offers current or magnetic-flux dependent adjustable dynamic properties in real-time. However, their optimal tuning in presence of uncertainty offers serious challenges. With this in view, present study focuses on the reliability-based optimal tuning of hybrid base isolation system where uncertainty associated with MR damper and ground excitation play the vital role. Thus, the damper is tested in the laboratory to experimentally model the random variables. A sparse polynomial chaos expansion based meta model is used to replace the original limit state function for improved computational efficiency. Finally, the response of a full-scale base isolated building is used to compare the algorithm for optimal reliability based tuning of the hybrid system. The results show the enhanced performance of the proposed system compared to the traditional base isolation to simultaneously mitigate the structural response and the isolator displacement demand.
- 20 April 2026
- Published by SAGE Publications in Journal of Vibration and Control
Reliability-based optimal design of a hybrid base isolator with an MR-TMDI using multi-condition experimentally identified MR damper parameters under non-stationary ground motion
Conventional passive base isolators often experience large displacement demand that require more advanced architecture to ensure safety and serviceability. To reduce this displacement demand, hybrid base isolation system is often prescribed where the passive isolation system is augmented with additional devices, e.g., a tuned mass damper inerter (TMDI) system along with a magneto-rheological (MR) damper in the present study. An inerter is a two-terminal flywheel where the generated force is proportional to the relative acceleration between its two ends, while a MR damper offers current or magnetic-flux dependent adjustable dynamic properties in real-time. However, their optimal tuning in presence of uncertainty offers serious challenges. With this in view, present study focuses on the reliability-based optimal tuning of hybrid base isolation system where uncertainty associated with MR damper and ground excitation play the vital role. Thus, the damper is tested in the laboratory to experimentally model the random variables. A sparse polynomial chaos expansion based meta model is used to replace the original limit state function for improved computational efficiency. Finally, the response of a full-scale base isolated building is used to compare the algorithm for optimal reliability based tuning of the hybrid system. The results show the enhanced performance of the proposed system compared to the traditional base isolation to simultaneously mitigate the structural response and the isolator displacement demand.
- Open Access
- 15 October 2025
- Published by Elsevier in Wind Energy and Engineering Research
- Vol. 4
Bayesian Neural Network based analysis of supervised control and data acquisition of Horizontal Axis Wind Turbine for fault detection
- 15 October 2025
- Published by Elsevier in Wind Energy and Engineering Research
- Vol. 4
Open AccessBayesian Neural Network based analysis of supervised control and data acquisition of Horizontal Axis Wind Turbine for fault detection
- 18 June 2025
- Published by Springer Nature in Journal of Civil Structural Health Monitoring
- Vol. 15 (7) , 2473-2494
Multi-channel synchrosqueezed wavelet transform based identification of modal parameters of a vibrating structure
- 18 June 2025
- Published by Springer Nature in Journal of Civil Structural Health Monitoring
- Vol. 15 (7) , 2473-2494
Multi-channel synchrosqueezed wavelet transform based identification of modal parameters of a vibrating structure
- 6 July 2023
- Published by Elsevier
- p. 351-397
Multibody dynamic analysis of onshore horizontal-axis wind turbine
- 6 July 2023
- Published by Elsevier
- p. 351-397
Multibody dynamic analysis of onshore horizontal-axis wind turbine
- Open Access
A Data-Driven System Identification Method for Random Eigenvalue Problem Using Synchrosqueezed Energy and Phase Portrait Analysis
The primary purpose of this research is to evaluate the uncertainty associated with modal parameter estimation for an inverse dynamic problem in which the structural parameters are random. The random nature of the structure’s parameters will be reflected in the modal features of the respected system. However, this may result in additive/subtractive errors in modal parameter identification, affecting the identification technique’s efficiency. With this in mind, the present study aims to develop an automated modal identification algorithm for a random eigenvalue problem. This is achieved by a recently developed advanced version of the wavelet transform (i.e., synchrosqueezing), which offers better resolution. Using this technique, the measured responses are transformed into a time-frequency plane, which is further processed by unsupervised learning using K-means clustering for quantification of the modal parameters. This automated identification is repeated for an ensemble of measurements to quantify the random eigenvalues in a statistical sense. The proposed methodology is first tested using simulated time histories of a two degree-of-freedom (dof) system. It is followed by an experimental validation using a beam whose mass matrix is random. The numerical results presented in this work clearly demonstrate the performance (i.e., in terms of efficiency and accuracy) of the proposed output-only automated data-driven identification scheme for random eigenvalue problems.
Open AccessA Data-Driven System Identification Method for Random Eigenvalue Problem Using Synchrosqueezed Energy and Phase Portrait Analysis
The primary purpose of this research is to evaluate the uncertainty associated with modal parameter estimation for an inverse dynamic problem in which the structural parameters are random. The random nature of the structure’s parameters will be reflected in the modal features of the respected system. However, this may result in additive/subtractive errors in modal parameter identification, affecting the identification technique’s efficiency. With this in mind, the present study aims to develop an automated modal identification algorithm for a random eigenvalue problem. This is achieved by a recently developed advanced version of the wavelet transform (i.e., synchrosqueezing), which offers better resolution. Using this technique, the measured responses are transformed into a time-frequency plane, which is further processed by unsupervised learning using K-means clustering for quantification of the modal parameters. This automated identification is repeated for an ensemble of measurements to quantify the random eigenvalues in a statistical sense. The proposed methodology is first tested using simulated time histories of a two degree-of-freedom (dof) system. It is followed by an experimental validation using a beam whose mass matrix is random. The numerical results presented in this work clearly demonstrate the performance (i.e., in terms of efficiency and accuracy) of the proposed output-only automated data-driven identification scheme for random eigenvalue problems.
- 21 September 2022
- Published by Springer Nature
- p. 159-170
Stochastic First-Ply Failure Analysis of Laminated Composite Plate: A Moving Least Square Approach
- 21 September 2022
- Published by Springer Nature
- p. 159-170
Stochastic First-Ply Failure Analysis of Laminated Composite Plate: A Moving Least Square Approach
- 3 January 2022
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 26 (16) , 8552-8576
Reliability Based Optimal Tuning of Magneto-Rheological Elastomer for Efficient Structural Control against Non-Stationary Ground Motion
A reliability-based tuning of magneto-rheological elastomer is presented in this work for optimal control under non-stationary seismic ground motion. This smart isolator offers flexibility to the designer as it can change characteristics in the presence of the electric field. However, their phenomenological property needs to be tuned for site-specific demand. The problem is solved using the polynomial chaos-kriging model and the methodology is demonstrated using both process-specific and scenario-specific ensemble ground motion. The numerical analysis clearly shows the advantages of the proposed reliability-based design over the deterministic design of the isolation system.
- 3 January 2022
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 26 (16) , 8552-8576
Reliability Based Optimal Tuning of Magneto-Rheological Elastomer for Efficient Structural Control against Non-Stationary Ground Motion
A reliability-based tuning of magneto-rheological elastomer is presented in this work for optimal control under non-stationary seismic ground motion. This smart isolator offers flexibility to the designer as it can change characteristics in the presence of the electric field. However, their phenomenological property needs to be tuned for site-specific demand. The problem is solved using the polynomial chaos-kriging model and the methodology is demonstrated using both process-specific and scenario-specific ensemble ground motion. The numerical analysis clearly shows the advantages of the proposed reliability-based design over the deterministic design of the isolation system.