Marco Caciagli

From the paleoseismological and seismotectonic point of view, the intermountain basins of the Central Apennines of Italy are one of the most studied areas worldwide. Within this context, however, the Rieti Basin, bounded at its sides by active normal faults and with its peculiar rhombohedral shape, is a relatively overlooked area, and its most recent paleoseismological studies date back to the 90s. This is a key area both for completing the paleoseismological history of this sector of the chain and for understanding how the present-day extensional regime is accommodated through time by the faults bounding the basin. With this aim in mind, we excavated 17 paleoseismological trenches along the normal faults bordering the Rieti Basin (Central Apennines, Italy) and unveiled at least 6 paleoearthquakes that ruptured the faults during the last ca. 20 kyr. Our analysis of the paleoearthquake succession along the basin-bounding faults suggests that a spatial pattern is followed during sequences of rupturing events, with a maximum credible earthquake of M_w 6.5, consistently within this sector of the Central Apennines.

From the paleoseismological and seismotectonic point of view, the intermountain basins of the Central Apennines of Italy are one of the most studied areas worldwide. Within this context, however, the Rieti Basin, bounded at its sides by active faults and with its peculiar rhombohedral shape, is a relatively overlooked area, and its most recent paleoseismological studies date back to the ‘90s. This is a key area both for completing the paleoseismological history of this sector of the chain and for understanding how the present-day extensional regime is accommodated, through time by the faults bounding the basin. With this aim in mind, we excavated 17 paleoseismological trenches along the normal faults bordering the Rieti Basin (Central Apennines, Italy) and unveiled 15 paleoearthquakes that ruptured the faults during the last ca. 20 kyr. Our analysis of the paleoearthquake succession along the basin-bounding faults suggests that a temporal clustering of rupturing events characterizes the basin with a maximum credible earthquake of Mw 6.5, consistently within this sector of the Central Apennines. These results suggest that for the Rieti Basin, stress transfer among surrounding faults can be ascribed as one of the processes behind the temporal clustering of earthquakes.

Field surveys focused on detailed mapping and measurements of coseismic surface ruptures along the causative fault of the 6 February 2023, Mw 7.8 Kahramanmaraş earthquake. The aim was filling gaps in the previously available surface-faulting trace, validating the accuracy of data obtained from remote sensing, refining fault offset estimates, and gaining a deeper understanding of both the local and overall patterns of the main rupture strands. Measurements and observations confirm dominating sinistral strike-slip movement. An integrated and comprehensive slip distribution curve shows peaks reaching over 700 cm, highlighting the near-fault expressing up to 70% of the deep net offset. In general, the slip distribution curve shows a strong correlation with the larger north-eastern deformation of the geodetic far field dislocation field and major deep slip patches. The overall rupture trace is generally straight and narrow with significant geometric complexities at a local scale. This results in transtensional and transpressional secondary structures, as multi-strand positive and negative tectonic flowers, hosting different patterns of the mole-tracks at the outcrop scale. The comprehensive and detailed field survey allowed characterizing the structural framework and geometric complexity of the surface faulting, ensuring accurate offset measurements and the reliable interpretation of both morphological and geometric features.

From the paleoseismological and seismotectonic point of view, the intermountain basins of the Central Apennines of Italy are one of the most studied areas worldwide. Within this context, however, the Rieti Basin, bounded at its sides by active faults and with its peculiar rhombohedral shape, is a relatively overlooked area, and its most recent paleoseismological studies date back to the ‘90s. This is a key area both for completing the paleoseismological history of this sector of the chain and for understanding how the present-day extensional regime is accommodated, through time by the faults bounding the basin. With this aim in mind, we excavated 17 paleoseismological trenches along the normal faults bordering the Rieti Basin (Central Apennines, Italy) and unveiled 15 paleoearthquakes that ruptured the faults during the last ca. 20 kyr. Our analysis of the paleoearthquake succession along the basin-bounding faults suggests that a temporal clustering of rupturing events characterizes the basin with a maximum credible earthquake of Mw 6.5, consistently within this sector of the Central Apennines. These results suggest that for the Rieti Basin, stress transfer among surrounding faults can be ascribed as one of the processes behind the temporal clustering of earthquakes.

The interaction between crustal stress and fluids affects a variety of geophysical processes, such as earthquakes. However, limitations in direct measurements make the forces transmitted within the crust particularly difficult to characterize, hindering the description of subsurface phenomena with potential impact on the surface. In this study, exploiting the correlation between stress, fluid accumulation, and anisotropic (i.e., directional-dependent) seismic velocities, we use P-wave travel time tomography to infer subsurface minimum compression directions, fluid distribution, and crustal structure in the Val d’Agri seismogenic area (southern Apennines, Italy). Reconstructed seismic anomalies are compared with independent observations; large values of P-wave anisotropy (up to ~10%) are imaged throughout the sampled crustal volume, likely indicating the presence of preferentially oriented fluid-filled cracks down to at least 12 km depth. We show regions where the reconstructed stress deviates from the tectonic trend of the Apennines, highlighting the significant contribution of surface and subsurface loading.

Features such as fault geometry and slip-rates are key inputs to assess the seismic hazard imposed by either ground motion or fault displacement. However, complexities in the geology of faults, such as relay zones and along-strike fault bends, could lead to settings characterized by high segmentation, with multiple splays arranged both along and across strike. In order to assess the seismic hazard associated with such fault sectors, it is necessary to establish whether the 3D shallow deformation is equally spread over the multiple fault splays or the activity tends to localise on specific splays. This problem is enhanced when these faults are located within urban areas, and therefore their surface expression is altered by intense anthropic activity.Within the framework of a work on the mitigation of the fault displacement hazard associated with the Mt. Marine active normal fault (Central Italy), we have performed two paleoseismological surveys within the town of Pizzoli (about 10 km NW of L’Aquila), where the fault is expressed with several splays arranged both along and across-strike. The trenches were planned to explore (i) potential fault scarps altered by human activity, identified through aerial photographs, LiDAR and fieldwork analysis, and (ii) discontinuities in the stratigraphic record highlighted by geophysical investigations (ERT, GPR) and borehole data.The paleoseismological surveys intercepted five fault splays arranged across-strike, three synthetic and two antithetic to the main Mt. Marine fault. The fault splays show evidence of multiple Late Pleistocene/Holocene surface-rupturing seismic events, marked by colluvial wedges and infilled fractures. Moreover, we constrained the Late Pleistocene slip-rate of the Mt. Marine fault splays by dating and correlating Late-Pleistocene paleosols found (1) outcropping in the footwall of one of the inner fault splay and (2) in a borehole located just at the hangingwall of the outermost splay.Our results show that the fault splays exhibit different and variable activity rates, suggesting that fault activity is localized on specific fault splays through space and time with the potential to rupture simultaneously during large earthquakes. Our findings have strong implications on fault-based seismic hazard assessments, as they imply that data collected on one splay may not be representative of the behaviour of the entire fault.

The Val d’Agri (VA) oilfield in the Lucanian Apennines (southern Italy), represents the largest onshore in Europe. Since the 1990's, hydrocarbons are produced from a fractured carbonate reservoir with an average extraction rate of 7*104 barrels/day of oil and 3*106 Smc/day of gas. Part of the wastewater has been re-injected since 2006 into a marginal portion of the reservoir by a high-rate well (Costa Molina 2, CM2). Charged by the Italian oil and gas safety authority, the National Institute of Geophysics and Volcanology (INGV) monitors the VA industrial hydrocarbon operations through the research activity of a dedicated working group (CMS, Centro di Monitoraggio del Sottosuolo) and according to the governmental monitoring guidelines. The CMS operates the real-time acquisition and offline analyses of seismic data recorded at 56 seismic stations associated with public and private local seismic networks. The principal aim of the CMS is to investigate the risk associated with industrial activities that can induce or trigger seismic events by producing stress changes within the upper crustal volume. Previous works have highlighted a spatio-temporal relationship between micro-seismicity (ML ≤ 2.2) and wastewater injection, delineating a NE-dipping back-thrust near the CM2. Part of the microseismicity recorded in the southwestern portion of the VA has also been associated with the water level changes of the Pertusillo lake. One of the main challenges is to define an accurate structural setting of the VA to understand the potential of earthquakes in the area and investigate the presence of active faults. The VA consists of a Quaternary extensional tectonic basin and it is one of the areas of highest seismic hazard in Italy (Basilicata, 1857, M7 earthquake). The basin is bounded by two parallel and oppositely dipping normal fault systems: the Monti della Maddalena Fault System (MMFS) on its western side and the Eastern Agri Fault System (EAFS) on the eastern one. The characterization of the ongoing tectonic activity of the MMFS and EAFS, and their hierarchical relationship is still generating debate among the scientific community. We adopt a multidisciplinary approach based on detailed geological-structural, geophysical and seismic analyses, and electrical resistivity tomography, aimed at reconstructing the subsurface geology of the area and recognizing and characterizing the active and capable faults, and the associated potential for local seismic hazard. We present and discuss the results of this work, focusing on the relative location of seismic events that occurred between March and June 2022. The outcomes allow inferring interesting geologic constraints, highlighting the relationships between the distribution of local seismicity and the structural setting of the area in the uppermost crust (depth < 6 km).

At Mt. Etna (Italy), volcano‐tectonic earthquakes produce impressive surface faulting despite their moderate magnitude (M < 5.5), with historically well‐documented ruptures featuring end‐to‐end lengths up to 6–7 km. The 26 December 2018, M_w 5.0 earthquake represents the strongest event of the last 70 years, with ground ruptures extending for 7.5 km along the Fiandaca fault, a partially hidden structure in the volcano's eastern flank. Field data collected by the EMERGEO Working Group (INGV) are here integrated with high‐resolution photogrammetric surveys and geological‐morphological observations to enable a detailed structural analysis and to reconstruct the morphotectonic process of fault growth. The deformation zone develops in a transtensional regime and shows a complex pattern, consisting of brittle structures arranged in en‐échelon scale‐invariant overlapping systems. Offsets and kinematics vary along the strike due to a major bend in the fault trace. We reconstructed a prevailing right‐lateral displacement in the northern section of the fault and a dextral oblique slip in the southern one (max 35 cm); the dip‐slip component increases southward (max 50 cm) and overall resembles the along‐strike pattern of the long‐term morphological throw. The kinematic analysis indicates a quasi‐rigid behavior of the two fault blocks and suggests a geological model of rupture propagation that explains both the location of the seismic asperity in the northern section of the Fiandaca fault and the unclamping in the southern one. These findings are used to propose a conceptual model of the fault, representing insights for local fault‐based seismic hazard assessment.