Somayeh Farzad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Somayeh Farzad has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Johann Ferdinand Görgens
Department of Chemical Engineering, Stellenbosch University, Stellenbosch, South Africa
9 shared publications - Mohsen Ali Mandegari
Department of Process Engineering University of Stellenbosch Matieland South Africa
5 shared publications Johann F. Görgens
4 shared publicationsCara van Heerden
2 shared publicationsMohsen Mandegari
Department of Process Engineering, Stellenbosch University, Private Bag X1, Matieland 7602, South Africa
2 shared publicationsRhulani N. Ntimbani
Department of Process Engineering Stellenbosch University Stellenbosch South Africa
2 shared publications
Latest Publications
- Open Access
- 27 June 2024
- Published by Elsevier in Chemical Engineering Science
- Vol. 299
Techno-economics and environmental assessment of sorbitol and itaconic acid production from sugarcane-based feedstock
- 27 June 2024
- Published by Elsevier in Chemical Engineering Science
- Vol. 299
Open AccessTechno-economics and environmental assessment of sorbitol and itaconic acid production from sugarcane-based feedstock
- Open Access
- 2 February 2024
- Published by Elsevier in Food and Bioproducts Processing
- Vol. 145, 11-20
A techno-economic study of Polybutylene adipate terephthalate (PBAT) production from molasses in an integrated sugarcane biorefinery
- 2 February 2024
- Published by Elsevier in Food and Bioproducts Processing
- Vol. 145, 11-20
Open AccessA techno-economic study of Polybutylene adipate terephthalate (PBAT) production from molasses in an integrated sugarcane biorefinery
- Open Access
- 3 November 2023
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 11 (46) , 16453-16468
Techno-Economic and Environmental Assessments of 1,3-Propanediol and Xylooligosaccharide Production Annexed to a Typical Sugar Mill
- 3 November 2023
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 11 (46) , 16453-16468
Open AccessTechno-Economic and Environmental Assessments of 1,3-Propanediol and Xylooligosaccharide Production Annexed to a Typical Sugar Mill
- Open Access
- 1 September 2023
- Published by Alpha Creation Enterprise in Biofuel Research Journal
- Vol. 10 (03) , 1933-1947
A critical review of multiple alternative pathways for the production of a high-value bioproduct from sugarcane mill byproducts: the case of adipic acid
Biobased fuels, chemicals, and materials can replace fossil fuel products and mitigate climate change. Sugarcane mills have the potential to produce a wider range of biobased chemicals in a similar approach to bioethanol production, including adipic acid. Multiple alternative pathways for converting simple sugars into adipic acid have been described, with the potential for integration into a sugar mill. The economics and expected greenhouse gas emissions reductions compared to fossil-based adipic acid were investigated in the present study to identify preferred pathways for implementation in sugarcane biorefineries. Nine biobased pathways for adipic acid production were screened for technical performances, resulting in the selection of four preferred options for rigorous comparison, i.e., direct microbial conversion of sugars, and production via cis,cis-muconic acid, glucaric acid, and glycerol as intermediate, obtained from sugars. The minimum selling prices of adipic acid for an attractive return on investment were determined for these pathways, using either A-molasses or a combination of A-molasses and pretreated sugarcane lignocelluloses in biorefineries designed to be energy-self-sufficient. Adipic acid production from A-molasses via cis,cis-muconic acid was the best overall performing scenario with the lowest minimum selling price of USD 2,538/Mt and lowered greenhouse gas emissions (2,325 g CO2 eq/kg wet) compared to fossil-based adipic acid production. The scenarios with combined A-molasses and lignocellulosic feedstock had increased minimum selling prices by 29 to 101% compared to adipic acid production from A molasses via cis,cis-muconic acid.
- 1 September 2023
- Published by Alpha Creation Enterprise in Biofuel Research Journal
- Vol. 10 (03) , 1933-1947
Open AccessA critical review of multiple alternative pathways for the production of a high-value bioproduct from sugarcane mill byproducts: the case of adipic acid
Biobased fuels, chemicals, and materials can replace fossil fuel products and mitigate climate change. Sugarcane mills have the potential to produce a wider range of biobased chemicals in a similar approach to bioethanol production, including adipic acid. Multiple alternative pathways for converting simple sugars into adipic acid have been described, with the potential for integration into a sugar mill. The economics and expected greenhouse gas emissions reductions compared to fossil-based adipic acid were investigated in the present study to identify preferred pathways for implementation in sugarcane biorefineries. Nine biobased pathways for adipic acid production were screened for technical performances, resulting in the selection of four preferred options for rigorous comparison, i.e., direct microbial conversion of sugars, and production via cis,cis-muconic acid, glucaric acid, and glycerol as intermediate, obtained from sugars. The minimum selling prices of adipic acid for an attractive return on investment were determined for these pathways, using either A-molasses or a combination of A-molasses and pretreated sugarcane lignocelluloses in biorefineries designed to be energy-self-sufficient. Adipic acid production from A-molasses via cis,cis-muconic acid was the best overall performing scenario with the lowest minimum selling price of USD 2,538/Mt and lowered greenhouse gas emissions (2,325 g CO2 eq/kg wet) compared to fossil-based adipic acid production. The scenarios with combined A-molasses and lignocellulosic feedstock had increased minimum selling prices by 29 to 101% compared to adipic acid production from A molasses via cis,cis-muconic acid.
- Open Access
- 20 September 2022
- Published by Wiley in Biofuels, Bioproducts and Biorefining
- Vol. 17 (1) , 135-152
Polyethylene furanoate: technoeconomic analysis of biobased production
An economically viable scenario for production of polyethylene furanoate (PEF) is key to unlocking the potential for the replacement of the oil derivative polyethylene terephthalate (PET) by PEF. This work aims to provide a baseline for, and deeper insights into, the mass, energy, and economic performance of PEF production in integrated bioenergy self‐sufficient biorefineries. Alternative configurations for the production of PEF from A‐molasses (1G), sugarcane bagasse and trash (2G), or combinations of them (1G2G) were simulated as integrated sugarcane biorefineries – designed to be bio‐energy self‐sufficient – in Aspen Plus. Utilization of the existing boiler of the sugar mill accompanied by a small medium pressure boiler was sufficient to meet the energy demands of the combined sugar mill and biorefinery for the 1G scenario. Conversely, the increased energy demand of the 2G and 1G2G scenarios required replacement of the existing sugar mill boiler with a new combined heat and power plant. The profitability of each scenario was assessed in terms of the required minimum selling price (MSP) for an acceptable return on investment. The 2G PEF scenario was the least profitable with a MSP of 4.26 USD kg−1, whereas the 1G2G scenario (MSP of 2.39 USD kg−1) was more profitable due to economies of scale and other synergistic benefits of feedstock co‐processing, such as increased sugar concentration, which reduced the energy demands and the cost of downstream recovery. The 1G PEF scenario was the most profitable due to low capital cost and energy requirements associated with 1G conversion, with an MSP of 1.82 USD kg−1, approximately 77% higher than the market price of fossil‐based PET in 2019 (1.03 USD kg−1) to which PEF is functionally equivalent. The MSPs of PEF determined in this work is competitive with Avantium's forecast PEF market prices for mainstream and high value applications and the insights provided could encourage further development of sustainable PEF biorefineries. © 2022 The Authors. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.
- 20 September 2022
- Published by Wiley in Biofuels, Bioproducts and Biorefining
- Vol. 17 (1) , 135-152
Open AccessPolyethylene furanoate: technoeconomic analysis of biobased production
An economically viable scenario for production of polyethylene furanoate (PEF) is key to unlocking the potential for the replacement of the oil derivative polyethylene terephthalate (PET) by PEF. This work aims to provide a baseline for, and deeper insights into, the mass, energy, and economic performance of PEF production in integrated bioenergy self‐sufficient biorefineries. Alternative configurations for the production of PEF from A‐molasses (1G), sugarcane bagasse and trash (2G), or combinations of them (1G2G) were simulated as integrated sugarcane biorefineries – designed to be bio‐energy self‐sufficient – in Aspen Plus. Utilization of the existing boiler of the sugar mill accompanied by a small medium pressure boiler was sufficient to meet the energy demands of the combined sugar mill and biorefinery for the 1G scenario. Conversely, the increased energy demand of the 2G and 1G2G scenarios required replacement of the existing sugar mill boiler with a new combined heat and power plant. The profitability of each scenario was assessed in terms of the required minimum selling price (MSP) for an acceptable return on investment. The 2G PEF scenario was the least profitable with a MSP of 4.26 USD kg−1, whereas the 1G2G scenario (MSP of 2.39 USD kg−1) was more profitable due to economies of scale and other synergistic benefits of feedstock co‐processing, such as increased sugar concentration, which reduced the energy demands and the cost of downstream recovery. The 1G PEF scenario was the most profitable due to low capital cost and energy requirements associated with 1G conversion, with an MSP of 1.82 USD kg−1, approximately 77% higher than the market price of fossil‐based PET in 2019 (1.03 USD kg−1) to which PEF is functionally equivalent. The MSPs of PEF determined in this work is competitive with Avantium's forecast PEF market prices for mainstream and high value applications and the insights provided could encourage further development of sustainable PEF biorefineries. © 2022 The Authors. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.
- 14 September 2021
- Published by Wiley in Biofuels, Bioproducts and Biorefining
- Vol. 15 (6) , 1871-1887
Techno‐economic assessment of polylactic acid and polybutylene succinate production in an integrated sugarcane biorefinery
Plastic waste pollution is a growing environmental concern due to the increased use of conventional plastics. This study investigates the techno‐economics of biodegradable, bio‐based plastics, i.e. polylactic acid (PLA) and polybutylene succinate (PBS), as potential substitutes for conventional plastics, to identify the most viable one to be produced in a biorefinery annexed to a typical sugar mill. Six potential biorefinery scenarios were simulated in Aspen Plus®, in which PLA or PBS is derived from sugarcane molasses (1G scenarios), bagasse and harvesting residues (2G scenarios) or a mixture of molasses, bagasse, and harvesting residues (1G2G scenarios). The economic feasibility of the PLA and PBS scenarios was evaluated by means of the minimum selling prices (MSP) for an acceptable return on investment. The PLA scenarios showed lower MSPs than PBS with the 1G2G scenario having the lowest MSP (2965 US$ t–1), comparable to the commonly available PLA from corn grain (5140 US$ t–1). Polylactic acid benefited from lower process energy demands (5.5–5.8 MJ kg–1 of biomass or sugars processed) compared to PBS (5.1–8.2 MJ kg–1), which plays a crucial role in an energy self‐sufficient biorefinery. Furthermore, a 1G‐biorefinery was identified producing a fully biobased PBS at an MSP of 2980 US$ t–1 that is price competitive against fossil‐derived PBS (2380 US$ t–1) and partially bio‐derived PBS (4730 US$ t–1). To date, this was the first study to evaluate the detailed techno‐economics of a fully biobased and biodegradable PBS biorefinery in an energy self‐sufficient context, which was demonstrated to be cost‐competitive against both partial bio‐derived PBS and fully bio‐derived PBS. © 2021 Society of Chemical Industry and John Wiley & Sons, Ltd
- 14 September 2021
- Published by Wiley in Biofuels, Bioproducts and Biorefining
- Vol. 15 (6) , 1871-1887
Techno‐economic assessment of polylactic acid and polybutylene succinate production in an integrated sugarcane biorefinery
Plastic waste pollution is a growing environmental concern due to the increased use of conventional plastics. This study investigates the techno‐economics of biodegradable, bio‐based plastics, i.e. polylactic acid (PLA) and polybutylene succinate (PBS), as potential substitutes for conventional plastics, to identify the most viable one to be produced in a biorefinery annexed to a typical sugar mill. Six potential biorefinery scenarios were simulated in Aspen Plus®, in which PLA or PBS is derived from sugarcane molasses (1G scenarios), bagasse and harvesting residues (2G scenarios) or a mixture of molasses, bagasse, and harvesting residues (1G2G scenarios). The economic feasibility of the PLA and PBS scenarios was evaluated by means of the minimum selling prices (MSP) for an acceptable return on investment. The PLA scenarios showed lower MSPs than PBS with the 1G2G scenario having the lowest MSP (2965 US$ t–1), comparable to the commonly available PLA from corn grain (5140 US$ t–1). Polylactic acid benefited from lower process energy demands (5.5–5.8 MJ kg–1 of biomass or sugars processed) compared to PBS (5.1–8.2 MJ kg–1), which plays a crucial role in an energy self‐sufficient biorefinery. Furthermore, a 1G‐biorefinery was identified producing a fully biobased PBS at an MSP of 2980 US$ t–1 that is price competitive against fossil‐derived PBS (2380 US$ t–1) and partially bio‐derived PBS (4730 US$ t–1). To date, this was the first study to evaluate the detailed techno‐economics of a fully biobased and biodegradable PBS biorefinery in an energy self‐sufficient context, which was demonstrated to be cost‐competitive against both partial bio‐derived PBS and fully bio‐derived PBS. © 2021 Society of Chemical Industry and John Wiley & Sons, Ltd
- 7 September 2021
- Published by Wiley in Biofuels, Bioproducts and Biorefining
- Vol. 15 (6) , 1900-1911
Techno‐economics of one‐stage and two‐stage furfural production integrated with ethanol co‐production from sugarcane lignocelluloses
Lignocellulosic biomass processing to produce platform chemicals and biofuels is a promising alternative utilization of non‐renewable resources. This study investigated the techno‐economics of two‐stage and one‐stage furfural production integrated with ethanol co‐production from sugarcane bagasse and harvest residues. The effect of process conditions on profitability was reflected by the minimum ethanol selling price (MESP) at a fixed furfural‐selling price. Aspen Plus V8.8 was used to simulate the integrated two‐stage furfural and ethanol co‐production biorefineries using low (scenario 1), medium (scenario 2) and high (scenario 3) severity steam‐explosion pretreatment. The two‐stage furfural biorefineries integrated with ethanol co‐production were compared with the most profitable one‐stage furfural biorefinery integrated with ethanol co‐production. The required MESP in scenario 2 (0.73 US$ L–1) was decreased by 36% compared with the one‐stage furfural‐ethanol biorefinery (1.14 US$ L–1). Scenarios 1 and 3 were disadvantaged by lower ethanol yields (150 versus 214 kg t–1 of feed) and higher capital investments (322–340) compared with scenario 2 (310 million US$). The one‐stage furfural production had higher heating demands (2034 versus 741–1124 kW t–1 feed) and reduced ethanol yields (90 versus 150–214 kg t–1 of feed) compared with integrated two‐stage furfural and ethanol coproduction biorefineries. Optimization of process conditions, improving energy efficiency, and maximizing productivity within these energy self‐sufficient facilities were critical to minimizing the MESPs, regardless of associated increases in capital and operational costs. © 2021 Society of Chemical Industry and John Wiley & Sons, Ltd
- 7 September 2021
- Published by Wiley in Biofuels, Bioproducts and Biorefining
- Vol. 15 (6) , 1900-1911
Techno‐economics of one‐stage and two‐stage furfural production integrated with ethanol co‐production from sugarcane lignocelluloses
Lignocellulosic biomass processing to produce platform chemicals and biofuels is a promising alternative utilization of non‐renewable resources. This study investigated the techno‐economics of two‐stage and one‐stage furfural production integrated with ethanol co‐production from sugarcane bagasse and harvest residues. The effect of process conditions on profitability was reflected by the minimum ethanol selling price (MESP) at a fixed furfural‐selling price. Aspen Plus V8.8 was used to simulate the integrated two‐stage furfural and ethanol co‐production biorefineries using low (scenario 1), medium (scenario 2) and high (scenario 3) severity steam‐explosion pretreatment. The two‐stage furfural biorefineries integrated with ethanol co‐production were compared with the most profitable one‐stage furfural biorefinery integrated with ethanol co‐production. The required MESP in scenario 2 (0.73 US$ L–1) was decreased by 36% compared with the one‐stage furfural‐ethanol biorefinery (1.14 US$ L–1). Scenarios 1 and 3 were disadvantaged by lower ethanol yields (150 versus 214 kg t–1 of feed) and higher capital investments (322–340) compared with scenario 2 (310 million US$). The one‐stage furfural production had higher heating demands (2034 versus 741–1124 kW t–1 feed) and reduced ethanol yields (90 versus 150–214 kg t–1 of feed) compared with integrated two‐stage furfural and ethanol coproduction biorefineries. Optimization of process conditions, improving energy efficiency, and maximizing productivity within these energy self‐sufficient facilities were critical to minimizing the MESPs, regardless of associated increases in capital and operational costs. © 2021 Society of Chemical Industry and John Wiley & Sons, Ltd
- 1 September 2021
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 147
Sustainability assessment of sugarcane residues valorization to biobutadiene by exergy and exergoeconomic evaluation
- 1 September 2021
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 147
Sustainability assessment of sugarcane residues valorization to biobutadiene by exergy and exergoeconomic evaluation
- 28 January 2021
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 12 (11) , 5257-5267
Furfural production from sugarcane bagasse along with co-production of ethanol from furfural residues
- 28 January 2021
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 12 (11) , 5257-5267
Furfural production from sugarcane bagasse along with co-production of ethanol from furfural residues