Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jürgen Rühe has a total of 293 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fine Tuning of Thermal Activation and C,H-Insertion Crosslinking of Phenyl Diazo Ester Polymers

    by Dennis Rusitov, Johan Liotier, Oswald Prucker, Jürgen Rühe

    We describe the synthesis and crosslinking of polymers containing substituted phenyl diazo ester moieties. The diazo groups, which are dormant at room temperature, can be thermally activated to generate carbenes by releasing nitrogen. This subsequently causes C−H insertion crosslinking (CHic) of the polymers. The rates of carbene formation and crosslinking can be controlled by appropriate choice of the substituents at the phenyl ring. The Hammett equation can be used to predict how electron-donating or electron-withdrawing groups on the aromatic ring influence the activation and crosslinking behavior of the polymer, which allows tailoring of the process to a specific application. With the appropriate substitution pattern, diazo polymers can be designed to undergo thermal crosslinking under mild conditions. Thermally induced crosslinking of polymer films can be performed (gel content >80%) at temperatures as low as 40 °C within hours, or at 110 °C within seconds.

  • Open Access

    UV-Crosslinked Hydrogel Beads for Yeast Encapsulation and Fermentation Produced by Microfluidics

    by Juan Fernando Campaña-Perez, Sascha Bernard, Lokman Alpsoy, Marta Mollerach, Thomas Brandstetter, Betiana Lerner, Maximiliano Sebastian Perez, Jürgen Rühe

    This study addresses some limitations of standard cell encapsulation methods by producing hydrogel beads via UV-induced C,H-insertion crosslinking (CHic) in a microfluidic setup and the simultaneous encapsulation of yeast cells. It describes a simple one-step production of monodisperse beads with consistent dimensions of ~1000 × 500 µm and the encapsulation of Saccharomyces cerevisiae within these beads. Glucose consumption profiles show that the encapsulated yeast consumes glucose at rates comparable to free yeast, indicating that encapsulation does not impair metabolic activity. The encapsulated cells maintain high retained metabolic activity for up to 15 days at 4 °C and even at 30 °C, whereas free yeast stored at this temperature suffers a significant loss of activity. This highlights the potential of the platform for storing cells without refrigeration. Another advantage is that the fermentation solutions remain clear with minimal turbidity, and the beads can be easily separated from the solution by simple sieving, thus avoiding the need to filter the solution after fermentation. The results obtained suggest that the platform is robust and versatile for use in fermentation bioreactors and cell storage.

  • Open Access

    Self‐Cleaning Sensor Surfaces for Long‐Term Environmental Monitoring

    by Sanam Kumari Rajak, Yasmina Frey, Ulrike Wallrabe, Oswald Prucker, Jürgen Rühe

    Monitoring forest ecosystems requires outdoor sensors capable of long‐term operation throughout an entire growing season. They must remain protected against dust and pollen without any human intervention. This article presents a novel self‐cleaning and antibiofouling surface for cuvettes connected to leaf‐attached gas sensors using a combination of nanoparticles and C─H insertion crosslinking (CHic). Specifically, a solution containing trimethylsilyl‐functionalized silica nanoparticles (NPs) and a perfluoroacrylate (PFA) copolymer with integrated photoreactive benzophenone (BP) moieties is spray‐coated onto the substrate surfaces. Upon UV irradiation, the dormant BP moieties become activated and react with nearby C─H groups via C─H insertion leading to crosslinking of the coating layer. Simultaneously, reactions occur with C─H groups present in the polymer substrate, leading to covalent attachment of the network to the cuvette surface, and between the polymer network and the NPs, so that all reactions are performed within a single process step. Covalent bonds established by the CHic process provide strong adhesion and enhanced stability of the generated superhydrophobic coating to the cuvette surface. Finally, the cuvettes were attached to tree leaves and exposed to outdoor forest environments, where they exhibited efficient self‐cleaning behavior. The coatings demonstrated robust antisoiling and antibiofouling performance over a whole vegetation period in the forest.

  • Open Access

    Direct Laser Writing of Magnetic Micro Actuators With a Stimulus‐Responsive Compliant Hinge

    by Eleonora Galli, Nicolas Geid, Yizheng Liu, Friederike Strahl, Jürgen Rühe

    We present a modular design strategy for the one‐step fabrication of arrays of magnetically responsive microactuators connected to the substrate via compliant hinges. We use direct laser writing in the form of two‐photon crosslinking within bilayer films to generate three‐dimensional microstructures in which magnetic nanoparticles are embedded in the upper layer. This part of the generated structure drives the actuation, while the hydrogel bottom layer is used to form a mechanically compliant hinge structure. The chemical composition and geometrical features of the hinge control the actuation amplitude, the mechanical properties, and the environmental adaptability. Hydrogel hinges provide stability and strong actuation in an aqueous environment, while stimulus‐responsive hinges allow for the dynamic reconfiguration of the actuation and bistable behavior without altering the magnetically driving component. This hinge‐based approach establishes a new class of adaptive microactuators and provides a generalizable platform for programmable soft micromachines.


  • Open Access

    Heat and solvent resistant electrospun nanofibers for tunable fluid transport in lateral flow applications

    by Nathan K. Bentley, Johan Liotier, Hanyan Lyu, Theresa Peters, Thomas Brandstetter, Jürgen Rühe

    Lateral flow devices (LFDs) rely on porous materials to guide liquid transport, and electrospun fiber mats have emerged as attractive candidates due to their high surface area, tunable porosity, and ease of functionalization. However, conventional electrospun nanofibers often deform or dissolve when exposed to heat or to solvents commonly used in biochemical assays, limiting their applicability. To address this challenge, we developed electrospun poly(methyl methacrylate) (PMMA) nanofibers that are both heat-stable and solvent-resistant through the incorporation of photoreactive groups and subsequent solid-state crosslinking via the C, H-insertion crosslinking (CHic) reaction. PMMA fibers containing methacryloyloxy benzophenone (MABP) units were rapidly activated with UV light, yielding nanofiber mats that retain their morphology under elevated temperatures and also in solvents typically used in biochemical assays. Beyond mechanical and chemical stability, we demonstrate that the surface energy of these fibers can be precisely tuned through the formation of a crosslinked hydrogel sheath composed of dimethyl acrylamide (DMAA) and MABP comonomers. This sheath can be applied either by dip-coating of mats of pre-formed fibers or by coaxial electrospinning, and becomes covalently integrated with the fiber core upon light activation. The resulting core–sheath structure transforms the originally hydrophobic PMMA mat into a highly hydrophilic, paper-like material capable of supporting controlled capillary flow. These robust and tunable nanofiber mats offer new opportunities for the design of lateral flow devices with improved solvent compatibility, thermal stability, and flow performance.

  • Open Access

    Light Induced Training of 3D Printed Mechanical Metamaterials

    by David Schwarz, Johan Liotier, Viacheslav Slesarenko, Jürgen Rühe

    Stimuli‐responsive materials often react to changes in environmental conditions by altering their shape. Here, it is shown that even changes in materials that are not directly observable, such as local stiffening, can be exploited to introduce the concept of trainable materials. A fully 3D‐printable filament based on thermoplastic polyurethane (TPU) functionalized with a bivalent crosslinker capable of undergoing a C,H insertion reaction under UV irradiation was developed. Specimens printed from this filament demonstrate a gradual increase in stiffness, reaching almost 300% of their initial stiffness after 50 hours of irradiation. To exploit this tunability, mechanical metamaterials incorporating the developed material are engineered. By utilizing an instability‐driven transformation under compression, it is demonstrated how local stiffening can be amplified through rational design. Moreover, by exploiting the unusual mechanical behavior of metamaterials arising from their internal architecture, a closed‐loop system is presented in which, under compressive load, the metamaterial closes an electric circuit that activates UV light, which in turn modifies the properties of the base material. Through this approach, two trainable systems are realized: one that progressively conforms its shape to mechanical compression, and another that gradually increases its resistance to an applied force, mimicking the physical training of biological tissues.

  • Open Access

    Hydrogel beads for enhanced nucleic acid analysis in complex fluid matrices

    by Lokman Alpsoy, Stephan Tieu, Sina Dehestanizad, Thomas Brandstetter, Jürgen Rühe

    Functionalized hydrogel bead platform for capturing cell-free DNA (cfDNA) as a cancer biomarker.


  • Open Access

    Durable Anti‐fogging Polymer Coatings Based on C,H Insertion Cross–linking (CHic) That Are User and Environmentally Friendly

    by Alexander Bleiziffer, Florian Deussen, Jürgen Rühe

    Fogged surfaces, such as bathroom mirrors, quickly become a nuisance in everyday life, but are particularly problematic in safety‐relevant and medical areas. Present approaches are often based on hydrophilic coatings, which can prevent fogging, but are not very durable. Surface‐attached polymer networks that can be quickly and easily prepared from thin films of prepolymers by photochemical activation using brief irradiation with ambient light are presented. This novel photoreactive copolymer contains ionic, hydrophilic repeating units and hydrophilic nitro‐substituted phenyl diazo ester moieties. The diazo groups in the prepolymer films form carbenes after excitation, which then bind to adjacent chains and to the substrate by C,H insertion cross–linking (CHic). The resulting surfaces exhibit excellent anti‐fogging properties as they allow water to condense into a uniform thin film. The substrates remain highly transparent, even after frequent washing. In addition, the polymers can also be easily applied to previously damaged coatings by soiling in order to fully restore the anti‐fog properties. Due to the solubility of the prepolymers in water, the easy cross–linking in sunlight, the durability of the coating, and the possibility of damage repair, the polymers are suitable for easy‐use scenarios by non‐professionals, which offers great potential for such an approach.


  • Open Access

    Attachment of Hydrogel Patches to Eye Tissue through Gel Transfer using Flexible Foils

    by Shubham Tiwari, Luisa Goldmann, Jan Lübke, Oswald Prucker, Gottfried Martin, Günther Schlunck, Jürgen Rühe

    Glaucoma, a leading cause of blindness, demands innovative and effective treatments that surpass the limitations of current drug and surgical interventions to lower intraocular pressure. This study describes the generation of cell-repellent hydrogel patches, their deposition on the ocular surface, and a photoinduced chemical binding between the patches and the collagens of the eye. The hydrophilic and protein-repellent hydrogel patch is composed of a copolymer made from dimethylacrylamide and a comonomer unit with anthraquinone moieties. A thin layer of the prepolymer is deposited on a flexible foil. This foil has a hydrophobic side on top and superhydrophilic sides on the bottom. A small amount of added water can penetrate easily through the foil and release the polymer, which is thus transferred from the foil onto the eye at the desired location. Through brief irradiation with UV light with a wavelength of 365 nm, the prepolymer is simultaneously cross-linked and covalently attached to the eye's surface through C-H insertion reactions. We describe the handling, attachment, UV irradiation effects on nearby healthy tissues, biocompatibility, stability, and cellular interaction of the patches during in vitro studies.


  • Open Access

    A Gym for Cells—Direct Laser Writing of Magnetic Multilayered Micro Actuators for Mechanical Stimulation of Cells

    by Nicolas Geid, Ayman Husari, Eleonora Galli, Lukas Leffler, Pascal Tomakidi, Jürgen Rühe

    Mechanical forces play a crucial role in many biological processes, including cell–cell and cell–matrix interactions. The generation of surface‐attached multilayer micromagnet systems fabricated by two‐photon lithography and the use of such systems to perform single‐cell actuation are presented. The actuators are generated by two‐photon crosslinking and consist of a soft and flexible surface‐attached hydrogel layer swollen in aqueous medium and a hydrophobic polymer filled with magnetic nanoparticles. To this, thin copolymer bilayers containing a photoreactive crosslinking moiety are deposited on a solid substrate. The crosslinker units are activated by two‐photon excitation and react via a C,H insertion reaction with any nearby aliphatic C,H bonds. This leads to crosslinking and surface‐attachment of the forming structures so that arrays of micromagnetic pillars with spatially controlled cell adhesion behavior are formed in a single step. Cells are placed on the pillars and actuation is induced by an external magnetic field allowing for highly controllable dynamic and static actuation. Geometric differences can be used to vary cell morphogenesis and movement of the actuators to stretch the cells resulting in highly customizable actuator systems for specific cell growth and actuation control and the study of cell behavior on the molecular level.