Maciej Szumigała
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Maciej Szumigała has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Łukasz Polus
Institute of Building Engineering, Faculty of Civil and Transport Engineering, Poznan University of Technology, Piotrowo 5 Street, 60-965 Poznan, Poland
14 shared publications - Marcin Chybiński
Institute of Building Engineering, Faculty of Civil and Transport Engineering, Poznan University of Technology, Piotrowo 5 Street, 60-965 Poznan, Poland
3 shared publications - Piotr Szewczyk
West Pomeranian University of Technology in Szczecin, Faculty of Civil and Environmental Engineering, Al. Piastów 17, 70-310 Szczecin, Poland
3 shared publications Ewa Szumigała
Poznan Univ Tech, Poznan, Poland
2 shared publications- Katarzyna Ciesielczyk
Politechnika Poznanska
2 shared publications - Tomasz Wróblewski
Faculty of Civil and Environmental Engineering, West Pomeranian University of Technology in Szczecin, Al. Piastów 17, 70-310 Szczecin, Poland
2 shared publications
Latest Publications
- Open Access
- 3 January 2023
- Published by Polish Academy of Sciences Chancellery in Archives of Civil Engineering
- Vol. 68 (4) , 253-274
Aluminium members in composite structures – a review
This paper presents a review of composite structures in which aluminium alloys are used. Current trends in the research of composite structures with aluminium girders and their possible applications in structural engineering were shown. In the presented solutions, advantageous properties of aluminium alloys were exploited, such as high strength-to-weight ratio, corrosion resistance and recyclability. The authors demonstrated the structural behaviour of aluminium-concrete and aluminiumtimber composite beams based on their own tests as well as investigations presented in the literature. Furthermore, aluminium-concrete composite columns, a composite mullion made of an aluminium alloy and timber, and a military bridge consisting of aluminium truss components, a stay-in-place-form, reinforcement and concrete were presented. In addition to the description of the structural elements, the main conclusions from their experimental, theoretical and numerical analyses were also demonstrated in this paper. The connection of aluminium girders with concrete or timber slabs provided for the increase of the load-bearing capacity and stiffness, and it eliminated the problem of local buckling in girder flanges and lateral-torsional buckling of girders in the analysed solutions.
- 3 January 2023
- Published by Polish Academy of Sciences Chancellery in Archives of Civil Engineering
- Vol. 68 (4) , 253-274
Open AccessAluminium members in composite structures – a review
This paper presents a review of composite structures in which aluminium alloys are used. Current trends in the research of composite structures with aluminium girders and their possible applications in structural engineering were shown. In the presented solutions, advantageous properties of aluminium alloys were exploited, such as high strength-to-weight ratio, corrosion resistance and recyclability. The authors demonstrated the structural behaviour of aluminium-concrete and aluminiumtimber composite beams based on their own tests as well as investigations presented in the literature. Furthermore, aluminium-concrete composite columns, a composite mullion made of an aluminium alloy and timber, and a military bridge consisting of aluminium truss components, a stay-in-place-form, reinforcement and concrete were presented. In addition to the description of the structural elements, the main conclusions from their experimental, theoretical and numerical analyses were also demonstrated in this paper. The connection of aluminium girders with concrete or timber slabs provided for the increase of the load-bearing capacity and stiffness, and it eliminated the problem of local buckling in girder flanges and lateral-torsional buckling of girders in the analysed solutions.
- Open Access
Optimal Design of Steel–Concrete Composite Beams Strengthened under Load
This paper presents results of numerical analysis and experimental research on strengthening of steel–concrete composite beams. Studied members consisted of IPE200 I-beam and 90 × 700 mm reinforced concrete slab. The steel part of the section was strengthened by welding additional steel plates at the bottom. The study was performed for plate thickness ranging between 6 to 22 mm. Spatial FEM models were developed to account for material and geometric nonlinearities and for stress and post-welding strain. Proposed numerical models were experimentally validated. One aim was to find an optimum solution which would minimize cost and maximize bending capacity. To achieve this, energy parameters available in numerical simulations were reviewed and analyzed. Recoverable strain energy value determined in Abaqus was used to find the optimum solution.
Open AccessOptimal Design of Steel–Concrete Composite Beams Strengthened under Load
This paper presents results of numerical analysis and experimental research on strengthening of steel–concrete composite beams. Studied members consisted of IPE200 I-beam and 90 × 700 mm reinforced concrete slab. The steel part of the section was strengthened by welding additional steel plates at the bottom. The study was performed for plate thickness ranging between 6 to 22 mm. Spatial FEM models were developed to account for material and geometric nonlinearities and for stress and post-welding strain. Proposed numerical models were experimentally validated. One aim was to find an optimum solution which would minimize cost and maximize bending capacity. To achieve this, energy parameters available in numerical simulations were reviewed and analyzed. Recoverable strain energy value determined in Abaqus was used to find the optimum solution.
- Open Access
- 1 December 2019
- Published by University of Zielona Góra, Poland in Civil and Environmental Engineering Reports
- Vol. 29 (4) , 141-148
Influence of the Ribs Parallel to Web on Warping and Load-Bearing Capacity of a Steel I-Beam
The article analyses the method of enhancing a steel beam by adding additional steel members like ribs. They are rigidly connected with both flanges in a plane parallel to the web. That plates reduces warping during in-plane bending of steel beam under lateral-torsional bucking. Different thicknesses of steel plates used as ribs and different cross-sections were taken into account. Calculations were conducted using FEM and ABAQUS CAE environment. The outcomes were compared with ones from previous studies which concerned an influence of endplates on load-bearing capacity of an I-beam.
- 1 December 2019
- Published by University of Zielona Góra, Poland in Civil and Environmental Engineering Reports
- Vol. 29 (4) , 141-148
Open AccessInfluence of the Ribs Parallel to Web on Warping and Load-Bearing Capacity of a Steel I-Beam
The article analyses the method of enhancing a steel beam by adding additional steel members like ribs. They are rigidly connected with both flanges in a plane parallel to the web. That plates reduces warping during in-plane bending of steel beam under lateral-torsional bucking. Different thicknesses of steel plates used as ribs and different cross-sections were taken into account. Calculations were conducted using FEM and ABAQUS CAE environment. The outcomes were compared with ones from previous studies which concerned an influence of endplates on load-bearing capacity of an I-beam.
- 1 March 2019
- Published by Springer Nature in Archives of Civil and Mechanical Engineering
- Vol. 19 (2) , 375-390
An experimental and numerical study of aluminium–concrete joints and composite beams
- 1 March 2019
- Published by Springer Nature in Archives of Civil and Mechanical Engineering
- Vol. 19 (2) , 375-390
An experimental and numerical study of aluminium–concrete joints and composite beams
- Open Access
- 23 February 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 471
Stiffness of Composite Beams with Full Shear Connection
- 23 February 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 471
Open AccessStiffness of Composite Beams with Full Shear Connection
- Open Access
- 23 February 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 471 (5) , 052081
Finite Element Modelling of the Connection for Timber-concrete Composite Beams
- 23 February 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 471 (5) , 052081
Open AccessFinite Element Modelling of the Connection for Timber-concrete Composite Beams
- 1 January 2019
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2078, 020089
Laboratory tests vs. FE analysis of concrete cylinders subjected to compression
- 1 January 2019
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2078, 020089
Laboratory tests vs. FE analysis of concrete cylinders subjected to compression
- Open Access
- 1 September 2018
- Published by University of Zielona Góra, Poland in Civil and Environmental Engineering Reports
- Vol. 28 (3) , 30-49
Damage Detection of Steel-Concrete Composite Beam
The paper presents analysis results of steel-concrete composite beams, identification and attempts to detect damage introduced in a discrete model. Analysis of damage detection was conducted using DDL (Damage, Detection, Localization), our own original algorithm. Changes of dynamic and static parameters of the model were analysed in damage detection. Discrete wavelet transform was used for damage localization in the model. Prior to ultimate analysis, two-tier identification of discrete model parameters based on experimental data was made. In identification procedure, computational software (Python, Abaqus, Matlab) was connected in automated optimization loops. Results positively verified the original DDL algorithm for damage detection in steel-concrete composite beams, which enables further analysis using experimental data.
- 1 September 2018
- Published by University of Zielona Góra, Poland in Civil and Environmental Engineering Reports
- Vol. 28 (3) , 30-49
Open AccessDamage Detection of Steel-Concrete Composite Beam
The paper presents analysis results of steel-concrete composite beams, identification and attempts to detect damage introduced in a discrete model. Analysis of damage detection was conducted using DDL (Damage, Detection, Localization), our own original algorithm. Changes of dynamic and static parameters of the model were analysed in damage detection. Discrete wavelet transform was used for damage localization in the model. Prior to ultimate analysis, two-tier identification of discrete model parameters based on experimental data was made. In identification procedure, computational software (Python, Abaqus, Matlab) was connected in automated optimization loops. Results positively verified the original DDL algorithm for damage detection in steel-concrete composite beams, which enables further analysis using experimental data.
- Open Access
- 1 June 2018
- Published by University of Zielona Góra, Poland in Civil and Environmental Engineering Reports
- Vol. 28 (2) , 101-111
Static Equilibrium Paths of Steel-Concrete Composite Beam Strengthened Under Load
The paper presents exemplary static equilibrium paths of an element strengthened while under load. A steel-concrete composite beam was analyzed. The study discusses the effect of strengthening method, initial load values, welding stress, concrete shrinkage and introduction of additional control of distortion state on the course of static equilibrium path. Results calculated in numerical FEM simulation were verified with experimental data and were found to be consistent.
- 1 June 2018
- Published by University of Zielona Góra, Poland in Civil and Environmental Engineering Reports
- Vol. 28 (2) , 101-111
Open AccessStatic Equilibrium Paths of Steel-Concrete Composite Beam Strengthened Under Load
The paper presents exemplary static equilibrium paths of an element strengthened while under load. A steel-concrete composite beam was analyzed. The study discusses the effect of strengthening method, initial load values, welding stress, concrete shrinkage and introduction of additional control of distortion state on the course of static equilibrium path. Results calculated in numerical FEM simulation were verified with experimental data and were found to be consistent.
- Open Access
- 20 December 2017
- Published by University of Zielona Góra, Poland in Civil and Environmental Engineering Reports
- Vol. 27 (4) , 143-156
An Analysis of the Load-Bearing Capacity of Timber-Concrete Composite Beams with Profiled Sheeting
This paper presents an analysis of timber-concrete composite beams. Said composite beams consist of rectangular timber beams and concrete slabs poured into the steel sheeting. The concrete slab is connected with the timber beam using special shear connectors. The authors of this article are trying to patent these connectors. The article contains results from a numerical analysis. It is demonstrated that the type of steel sheeting used as a lost formwork has an influence on the load-bearing capacity and stiffness of the timber-concrete composite beams.
- 20 December 2017
- Published by University of Zielona Góra, Poland in Civil and Environmental Engineering Reports
- Vol. 27 (4) , 143-156
Open AccessAn Analysis of the Load-Bearing Capacity of Timber-Concrete Composite Beams with Profiled Sheeting
This paper presents an analysis of timber-concrete composite beams. Said composite beams consist of rectangular timber beams and concrete slabs poured into the steel sheeting. The concrete slab is connected with the timber beam using special shear connectors. The authors of this article are trying to patent these connectors. The article contains results from a numerical analysis. It is demonstrated that the type of steel sheeting used as a lost formwork has an influence on the load-bearing capacity and stiffness of the timber-concrete composite beams.