CKCor Kasbergen

Cor Kasbergen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Cor Kasbergen has a total of 52 co-authors. Here are the top co-authors by number of shared publications:

  • A. Scarpas

    Section of Structural Mechanics, Faculty of Civil Engineering & Geosciences, Delft University of Technology, Stevinweg 1, 2628 CN, Delft, The Netherlands

    12 shared publications
  • J. Blaauwendraad

    Researcher, Faculty of Civil Engineering and Geosciences, Section of Structural Mechanics, Delft Univ. of Technology, P.O. Box 5048, 2600 GA Delft, The Netherlands

    6 shared publications
  • R. Al-Khoury

    5 shared publications
  • A. Scarpas

    Section of Pavement Engineering, Delft University of Technology, Delft, The Netherlands

    4 shared publications
  • Kumar Anupam

    Department of Engineering Structures, Faculty of Civil Engineering and Geosciences, Delft University of Technology, Delft, The Netherlands

    4 shared publications
  • Sandra Erkens

    Department of Engineering Structures, Delft University of Technology, Delft, Netherlands

    4 shared publications

Latest Publications

  • Open Access

    A parameter identification technique for traffic speed deflectometer tests of pavements

    by Zhaojie Sun, Cor Kasbergen, Karel N. van Dalen, Kumar Anupam, Athanasios Skarpas, Sandra M. J. G. Erkens

    The structural evaluation of existing pavements forms the basis for formulating cost-effective maintenance and rehabilitation strategies. A promising tool for pavement structural evaluation at network level is the Traffic Speed Deflectometer (TSD) test. However, the application of the TSD test is hindered by the lack of a robust and efficient parameter identification technique. To solve this problem, a theoretical model for the TSD test is first formulated. Then, a minimisation algorithm which works best with the theoretical TSD model for parameter identification is selected. Finally, the performance of this combination in processing field TSD measurements is studied. The results show that the modified Levenberg-Marquardt algorithm using all the 9 detection points is most suitable to be combined with the theoretical TSD model for parameter identification, which gives a promising parameter identification technique for TSD tests of pavements. The presented work contributes to the development of technologies for pavement structural evaluation.


  • Open Access

    A parameter back-calculation technique for pavements under moving loads

    by Zhaojie Sun, Cor Kasbergen, Karel N. van Dalen, Kumar Anupam, Sandra M.J.G. Erkens, Athanasios Skarpas

    Maintenance and rehabilitation strategies of pavements are usually made based on the results of performance evaluation. An efficient tool for pavement structural evaluation at network level is the traffic speed deflectometer (TSD) test. In order to deal with TSD measurements, this paper proposes a parameter back-calculation technique. Firstly, the sensitivity of the surface response for an elastic pavement structure with hysteretic damping to different structural parameters is investigated. Then, the ability of the parameter back-calculation technique is verified by conducting a case study. The results show that the proposed technique is able to back-calculate the structural parameters of pavements by analysing TSD measurements. The presented work contributes to the development of parameter back-calculation techniques for the TSD test.


  • Open Access

    Mapping and classifying large deformation from digital imagery: application to analogue models of lithosphere deformation

    by Taco Broerse, Nemanja Krstekanic, Cor Kasbergen, Ernst Willingshofer

    Particle Image Velocimetry (PIV), an image cross-correlation technique, is widely used for obtaining velocity fields from series of images of deforming objects. Rather than instantaneous velocities, we are interested in reconstructing cumulative deformation, and use PIV-derived incremental displacements for this purpose. Our focus is on analogue models of tectonic processes, which can accumulate large deformation. Importantly, PIV provides incremental displacements during analogue model evolution in a spatial reference (Eulerian) frame, without the need for explicit markers in a model. We integrate the displacements in a material reference (Lagrangian) frame, such that displacements can be integrated to track the spatial accumulative deformation field as a function of time. To describe cumulative, finite deformation, various strain tensors have been developed, and we discuss what strain measure best describes large shape changes, as standard infinitesimal strain tensors no longer apply for large deformation. PIV or comparable techniques have become a common method to determine strain in analogue models. However, the qualitative interpretation of observed strain has remained problematic for complex settings. Hence, PIV-derived displacements have not been fully exploited before, as methods to qualitatively characterize cumulative, large strain have been lacking. Notably, in tectonic settings, different types of deformation - extension, shortening, strike-slip - can be superimposed. We demonstrate that when shape changes are described in terms of Hencky strains, a logarithmic strain measure, finite deformation can be qualitatively described. Thereby, our method introduces a physically meaningful classification of large 2D strains. We show that our method allows for accurate mapping of tectonic structures in analogue models of lithospheric deformation, and complements visual inspection of fault geometries. Our method can easily discern complex strike-slip shear zones, thrust faults and extensional structures and its evolution in time. Our software to compute deformation is freely available and can be used to post-process incremental displacements from PIV or similar autocorrelation methods.

  • Open Access

    A nonlinear spectral element model for the simulation of traffic speed deflectometer tests of asphalt pavements

    by Zhaojie Sun, Cor Kasbergen, Athanasios Skarpas, Karel N. van Dalen, Kumar Anupam, Sandra M. J. G. Erkens

    A non-destructive testing method suitable for network-level pavement structural evaluation is the traffic speed deflectometer (TSD) test. However, the analysis of TSD measurements still needs a proper parameter back-calculation procedure, which requires an accurate and efficient forward calculation model. As a first step to solving this issue, a nonlinear spectral element model which can simulate TSD tests of asphalt pavements is developed. The model is used to investigate the characteristics and parameter sensitivity of the response of asphalt pavements caused by the TSD loading. The results indicate that the vertical deflection curve along the direction of movement observed on the asphalt pavement surface is slightly asymmetric, and the maximum deflection appears behind the centre of the loading area. In addition, the slope curve of vertical deflection is highly sensitive to the magnitude of the applied force, the moduli of the base layer and subgrade, and the thicknesses of the asphalt layer and base layer. Furthermore, the slope curve is relatively sensitive to the glassy modulus of the asphalt layer. Because of its good predictive capability and high computational efficiency, the proposed model has the desired characteristics to be used as the computational kernel for parameter back-calculation procedures of TSD measurements.


  • Study of Influence of Operating Parameters on Braking Friction and Rolling Resistance

    by Santosh K. Srirangam, Kumar Anupam, Cor Kasbergen, Athanasios Scarpas, Veronique Cerezo

    Tire–road interaction addresses safety with respect to braking friction and energy efficiency in the context of rolling resistance. These phenomena are coherent, but their engineering solutions can be contradictory. For example, highly skid-resistant surfaces may not be ideal for fuel economy, but surfaces with low rolling resistance may be prone to skidding. Several experimental and numerical studies have investigated the individual phenomena, but insufficient attention has been paid to studying them coherently. The present study computed braking friction and rolling resistance for various operating parameters and their coherent response for each parameter with the use of a thermomechanical contact algorithm. Micromechanical finite element simulations of a rolling or braking pneumatic tire against selected asphalt concrete surfaces were performed for various operating conditions, such as tire load, inflation pressure, speed, and ambient air and pavement temperatures. The coefficients of braking friction and rolling resistance were found to decrease with the inflation pressure and the temperature and to increase with the wheel load. The braking friction coefficient was found to decrease with the speed, in contrast to the rolling resistance coefficient, which increases with the same parameter. A full-skidding tire registered lower braking friction than a 20% slipping tire. Also, an asphalt surface with higher macrotexture offered higher braking friction and higher rolling resistance, and vice versa.


  • On the importance of rubber temperature in tire-rubber friction on stone surfaces

    by M Villani, A Scarpas, C Kasbergen, A de Bondt, R Khedoe, F Spieard, I Artamendi

  • Hydroplaning of Rolling Tires under Different Operating Conditions

    by S. K. Srirangam, K. Anupam, A. Scarpas, C. Kasbergen

    In the present study, a three-dimensional hydroplaning model was developed to quantify the hydroplaning speed at different operating conditions of tire under flooded pavement conditions. The hydroplaning speed was simulated for no slip and partial slip cases of tire. The hydroplaning speed was also computed for different yaw angles for rolling cases. Loss of braking traction due to hydroplaning is characterized by computing longitudinal friction force with respect to a variety of slip speeds up to hydroplaning. Impending hydroplaning risk on directional stability of vehicle was studied by plotting the cornering force against a range of rolling speeds up to hydroplaning. The fluid-structure interaction was performed by means of the Coupled Eulerian Lagrangian approach in the finite element context. The proposed model provides insight on the influence of hydroplaning conditions on braking and steering efficiency of a vehicle.


  • Analysis of Five-Point Bending Test for Multilayer Surfacing System on Orthotropic Steel Bridges

    by J. Li, X. Liu, A. Scarpas, G. Tzimiris, C. Kasbergen, R. Hofman, J. Voskuilen

    The French five-point bending (5PB) test provides a laboratory-scale test that allows studying the fatigue resistance of surfacing systems on orthotropic steel deck (OSD) bridges. The surfacing structure for OSD bridges in the Netherlands is mostly a multilayer system: top porous asphalt (PA) layer, guss asphalt (GA) layer, steel deck, and two membrane layers. In this paper, an analytical solution for the 5PB test setup is presented first. To understand better the influence of geometrical, mechanical, and structural parameters on the performance of the typical multilayer surfacing system of OSD bridges in the Netherlands, the 5PB test specimens with five structural layers have been investigated. The parametric study was performed at the numerical platform CAPA-3D, which was developed at the Section of Structural Mechanics of the Delft University of Technology. The thicknesses of the top PA layer, middle GA layer, and the steel plate were varied. The influences of the mechanical properties of both top and bottom membrane layers were studied. The sensitivities of those influence factors were evaluated by examination of the maximum tensile stress at the top surface of the PA layers and the strain distributions through the entire thickness of the specimen at two cross sections.