Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yizhou Hua has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Active Disturbance Rejection Control Based on Modified Particle Swarm Optimization of Six-Pole Hybrid Magnetic Bearing

    by Gai Liu, Zihao Tang, Yi Wang, Shiyu Ruan, Jinwei Zhang, Chenyin Zhao, Yizhou Hua

    In order to solve the coupling problem of the six-pole hybrid magnetic bearing (SHMB), an active disturbance rejection control based on modified particle swarm optimization is proposed. Firstly, the active disturbance rejection control (ADRC) for the six-pole hybrid magnetic bearing is introduced, which is a second-order system. Secondly, the modified particle swarm optimization (MPSO) is used for the ADRC, which can decouple the SHMB. Then, simulations of SHMBs are performed under different disturbance signals, and floating simulations and anti-interference simulations of ADRC-MPSO and ADRC are compared. Finally, an experimental platform is established that verifies feasibility and reliability.

  • Open Access

    Dual-System Interactive Performance Optimization Strategy for Single-Winding Consequent-Pole Bearingless Permanent Magnet Synchronous Motors

    by Ye Yuan, Jun Zhang, Yongjiang Zhang, Fan Yang, Yizhou Hua, Yichen Liu, Qingguo Sun

    In the single-winding consequent-pole bearingless permanent magnet synchronous motor (SW-CP-BPMSM), the torque and suspension systems utilize a shared winding configuration. This structure significantly intensifies inter-system coupling. Furthermore, the presence of non-linear and strongly coupled relationships among structural parameters, combined with inherent coupling and conflicts between optimization objectives, makes the unified optimization of key performance indicators for both the torque and suspension systems a substantial challenge. To address these issues, this paper proposes a dual-system interactive optimization strategy based on the classification of sensitive variables. First, the strategy employs the Sobol method to conduct a global sensitivity analysis. By defining dual-system coupled sensitive parameters and single-system sensitive parameters, the method achieves dimensionality reduction through parameter classification. Subsequently, Response Surface Methodology (RSM) and Back Propagation (BP) neural network surrogate models are constructed for the suspension and torque systems, respectively. A progressive optimization process—comprising single-system optimization followed by dual-system interactive optimization—is then performed on the single-system and dual-system sensitive variables to determine the final optimal parameters. Finally, a comparative simulation analysis of the key performance indicators for both the torque and suspension systems before and after optimization is conducted. The results validate the feasibility and effectiveness of the proposed optimization strategy.

  • Model-Free Predictive Control of Bearingless IPMSM Under Parameter Disturbance

    by Yizhou Hua, Yuchen Zhu, Xin Wang, Huangqiu Zhu

    In order to solve the problem of control performance degradation in bearingless interior permanent magnet synchronous motors (BIPMSM) due to mismatched parameters and external disturbances, a model-free predictive control (MFPC) based on an extended state observer (ESO) is proposed. This approach is independent of the motor parameters and has been used to improve control system stability. First, the working principle and mathematical model of the BIPMSM are introduced. Second, an ultralocal prediction model of BIPMSM is developed and an ESO is constructed to estimate the unknown disturbances in the ultralocal model and perform feedforward compensation. In addition, the reference voltage is calculated with the deadbeat principle. Finally, the proposed MFPC control method is verified through simulation and experimental tests under various operating conditions, including load disturbances and parameter variations. The simulation and experimental results demonstrate that the proposed MFPC method exhibits strong disturbance rejection capability, parameter robustness, and excellent static and dynamic response characteristics.

  • Open Access

    Vibration Suppression Strategy for Bearingless Interior Permanent Magnet Synchronous Motor Based on Proportional–Integral–Resonant Controller

    by Yizhou Hua, Chenghao Yao, Zhenghui Zhao

    To address the vibration issues in bearingless interior permanent magnet synchronous motors (BIPMSMs) caused by rotor mass unbalance and inverter dead-time (DT) effects during operation, a vibration suppression strategy based on a Proportional–Integral–Resonant (PIR) controller is proposed. Firstly, the mathematical model of the BIPMSM is established, and the principle of suspension force generation is analyzed. Secondly, the mechanism underlying rotor vibration is theoretically investigated. Thirdly, a PIR controller is designed by connecting a modified Proportional–Resonant (PR) controller in parallel with a Proportional–Integral (PI) controller. The proposed controller combines the ideal PR controller’s characteristic of achieving infinite gain at the resonant frequency, enabling zero steady-state error tracking for sinusoidal signals at the resonant frequency. Finally, a vibration suppression system based on the PIR controller is constructed, and simulation experiments are conducted for verification. The simulation results show that the PIR controller effectively reduces both rotor mass unbalance vibration and DT vibration in the BIPMSM, while also suppressing current harmonics during the motor’s operation.

  • Open Access

    Multi-Objective Optimization Design of Bearingless Interior Permanent Magnet Synchronous Motor Based on MOWOA

    by Jianan Wang, Yizhou Hua, Boyan Xu, Yuchen Zhu

    Bearingless interior permanent magnet synchronous motors (BIPMSMs) have received considerable attention in recent research due to their advantages of high speed, high power density, and absence of mechanical wear. In order to improve the torque and suspension performance of the BIPMSM, an optimization design method of BIPMSM is proposed in this paper based on sensitivity analysis, response surface fitting, and the multi-objective whale optimization algorithm (MOWOA). Firstly, the structure and operation principle of the BIPMSM are introduced. Secondly, significant variables are extracted based on sensitivity analysis. Then, regression equations of the significant variables and optimization objectives are fitted by the response surface method, and global optimization is performed with MOWOA. Finally, the motor performance before and after optimization is compared. The results demonstrate that the proposed multi-objective optimization design scheme can significantly improve the performance of the BIPMSM and effectively shorten the design cycle.


  • Multiobjective Optimization Design of Permanent Magnet Assisted Bearingless Synchronous Reluctance Motor Using NSGA-Ⅱ

    by Yizhou Hua, Huangqiu Zhu, Min Gao, Zongyou Ji

    In order to improve the performance (low torque ripple, low suspension ripple and high power factor) of the permanent magnet assisted bearingless synchronous reluctance motor (PMa-BSynRM), the multi-objective optimal design based on NSGA-II (fast non-dominated sorting genetic algorithm) of PMa-BSynRM rotor topology is investigated. Firstly, the structure and operation principle of the PMa-BSynRM are introduced. Secondly, the initial rotor design that gives optimizer the ability to produce a variety of barrier shapes and the comprehensive sensitive analysis that evaluates the influence of each design variable on optimization objectives are presented. Thirdly, the optimal design is selected from the Pareto front which is generated by NSGA-II, and validated by finite element analysis. The simulation results confirm that the torque and suspension force capacity of optimal motor are improved significantly in comparison with initial design, while the value of power factor reaches 0.81. Finally, the optimal prototype motor is manufactured, and experimental results confirm the validity and superiority of the optimized design.


  • Multi-Objective Optimization Design of Bearingless Permanent Magnet Synchronous Generator

    by Yizhou Hua, Huangqiu Zhu, Ying Xu

    In order to realize the design objectives of high power generation performance and stable suspension capability, a multi-objective optimization method based on a response surface (RS) model and an improved multi-objective particle swarm optimization (MOPSO) algorithm is proposed and utilized to the multi-objective optimization design of a bearingless permanent magnet synchronous generator (BPMSG). Firstly, the operating principle and the mathematical model of the BPMSG are introduced. Secondly, the design variables and the design objectives are determined and the design space is reduced by the sensitivity analysis. Thirdly, the RS models of design objectives are constructed and the improved MOPSO algorithm is applied to get the Pareto optimal sets. Finally, the initial generator and the optimal generator are compared using the finite element analysis software. Compared with the initial generator, the average suspension force of the optimal generator is increased by 21% and the suspension force ripple is decreased by 52%.


  • Torque Ripple Minimization for Bearingless Synchronous Reluctance Motor

    by Xiaoyan Diao, Huangqiu Zhu, Yuemei Qin, Yizhou Hua

    A bearingless synchronous reluctance motor (BSRM) is a new type of bearingless motors with numerous advantages. The conventional BSRM with a salient-pole rotor is easy to manufacture at the cost of low output torque and high torque ripple. In this paper, a new rotor structure with multi-layer flux barrier of the BSRM is proposed to improve performances of torque and levitation force. The key is to optimize flux-barrier layer number, flux-barrier thickness, and magnetic guide thickness. This new rotor structure is compared with the conventional one, confirming the validity of the proposed design. The experimental results show that the proposed BSRM can achieve stable operation with satisfactory levitation performance.


  • Optimization Design of Bearingless Synchronous Reluctance Motor

    by Haifei Ding, Huangqiu Zhu, Yizhou Hua

    In order to overcome common drawbacks of the low torque density and power factor for conventional bearingless synchronous reluctance motors (BSynRMs), a novel BSynRM rotor structure with ferrite magnets is designed in this paper. First, the basic structure and operation principle of the BSynRM are introduced, and the mathematical models of torque and suspension forces are deduced. Second, based on the finite element analysis method, the parameters of flux barriers layer, rotor rib width, and permanent magnets are optimized to increase the salient pole ratio and the difference between d and q axes inductance. Third, the performance of torque, suspension forces, and power factor for the optimized motor is compared with that of the traditional BSynRM. The research results show that the torque density and power factor increase about 54.4% and 56.3% respectively at optimal angle, whereas the average suspension force decreases about 15.7% owing to magnetic saturation. The optimized motor is validated to have good suspension and speed regulation performance.