Juha Koivisto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Juha Koivisto has a total of 89 co-authors. Here are the top co-authors by number of shared publications:
- Tero Mäkinen
Aalto University
13 shared publications Mikko J. Alava
Aalto University P.O. Box 15600
11 shared publications- Mikko J. Alava
Aalto University
11 shared publications - Isaac Yair Miranda Valdez
Department of Applied Physics Aalto University P.O. Box 15600 00076 Aalto Espoo Finland
8 shared publications Jari Rosti
Aalto University
5 shared publicationsM. Alava
Aalto University
5 shared publications
Latest Publications
- Open Access
- 16 October 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (44) , 30059-30065
Machine Learning Prediction of Molar Mass Distribution of Polymers Forming Fibrous Structures
Molecular weight parameters, such as molar mass distribution (MMD), are core characteristics of polymer materials. While MMD is routinely measured by gel permeation chromatography (GPC), the procedure takes time and resources and requires specific, relatively costly instruments. Polysaccharides such as cellulose and chitin are particularly difficult to dissolve. Herein, we report on the potential of combining hyperspectral imaging (HSI) with machine learning (ML) to predict, at different length scales, the MMDs of these sparingly soluble fibrous polymers from visible-range HS images (420−730 nm) of the solid substrate. A Gaussian process regression model was trained on principal component representations of the HS cubes against MMDs measured by GPC. HCl-vapor hydrolysis served as a controlled degradation pathway that altered the degree of polymerization without detectable morphological change. Although samples appear identical to the eye and under electron microscopy, HSI captures systematic optical differences that can be empirically related to GPC-measured MMD within the investigated hydrolyzed samples. Predicted distributions matched the GPC reference, with curve RMSEs of 0.009−0.027 (native cellulose paper), 0.017−0.050 (cellulose nanopaper), and 0.016−0.029 (chitin nanopaper). The principal features of the bimodal MMD of cellulose nanopaper and the leveling-off degree of polymerization were both recovered. The workflow uses a microscope, a tunable bandpass filter, and a digital camera, completing HSI acquisition and prediction in a few minutes per sample. This approach provides a non-destructive, solvent-free complement to traditional analytical techniques. The presented case study is a proof-of-concept, calibrated against GPC reference data for the specific materials and protocols studied here. Expanding to other polymer systems would require establishing a similar chromatographic reference for each new system.
- 16 October 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (44) , 30059-30065
Open AccessMachine Learning Prediction of Molar Mass Distribution of Polymers Forming Fibrous Structures
Molecular weight parameters, such as molar mass distribution (MMD), are core characteristics of polymer materials. While MMD is routinely measured by gel permeation chromatography (GPC), the procedure takes time and resources and requires specific, relatively costly instruments. Polysaccharides such as cellulose and chitin are particularly difficult to dissolve. Herein, we report on the potential of combining hyperspectral imaging (HSI) with machine learning (ML) to predict, at different length scales, the MMDs of these sparingly soluble fibrous polymers from visible-range HS images (420−730 nm) of the solid substrate. A Gaussian process regression model was trained on principal component representations of the HS cubes against MMDs measured by GPC. HCl-vapor hydrolysis served as a controlled degradation pathway that altered the degree of polymerization without detectable morphological change. Although samples appear identical to the eye and under electron microscopy, HSI captures systematic optical differences that can be empirically related to GPC-measured MMD within the investigated hydrolyzed samples. Predicted distributions matched the GPC reference, with curve RMSEs of 0.009−0.027 (native cellulose paper), 0.017−0.050 (cellulose nanopaper), and 0.016−0.029 (chitin nanopaper). The principal features of the bimodal MMD of cellulose nanopaper and the leveling-off degree of polymerization were both recovered. The workflow uses a microscope, a tunable bandpass filter, and a digital camera, completing HSI acquisition and prediction in a few minutes per sample. This approach provides a non-destructive, solvent-free complement to traditional analytical techniques. The presented case study is a proof-of-concept, calibrated against GPC reference data for the specific materials and protocols studied here. Expanding to other polymer systems would require establishing a similar chromatographic reference for each new system.
- Open Access
- 7 October 2026
- Published by Society of Rheology in Journal of Rheology
- Vol. 70 (6) , 1363-1381
Fractional rheology of methylcellulose thermogelation
Methylcellulose is well known for its thermoreversible gelation. Here, we utilize a fractional viscoelastic constitutive framework to analyze the time-, temperature-, and concentration-dependent behavior of the thermorheologically complex system formed by methylcellulose in water. We characterize the viscoelastic moduli using small amplitude oscillatory shear tests conducted over a wide temperature range (15 ≤ T ≤ 80 °C), which captures the evolving rheological responses associated with fibrillar microstructure formation on heating and dissolution on cooling. Depending on the temperature, the measured rheological responses are well described by the Scott Blair model of a critical gel or the fractional Kelvin–Voigt spring model, which provide a compact description of the evolving viscoelastic properties of methylcellulose. Below the fibril formation temperature, we observe the rheological response of a “clear gel” sustained by transient hydrophobic associations. Upon fibril formation, we observe a substantial change in the viscoelastic properties; the storage modulus grows dramatically, leading to the formation of highly elastic fibrillar gels whose power-law rheology is well described by the Scott Blair model. These changes with temperature and frequency are represented using a Cole–Cole representation. A distinct thermal hysteresis is associated with the thermogelation transition, which depends on the heating or cooling rate imposed. Analysis of the evolution in the material properties with temperature and concentration shows that a phenomenological scaling law effectively describes the fibril formation and dissolution processes across a range of methylcellulose compositions. This scaling law simplifies the analysis of large datasets and provides physical interpretability of the observed thermogelation phenomena.
- 7 October 2026
- Published by Society of Rheology in Journal of Rheology
- Vol. 70 (6) , 1363-1381
Open AccessFractional rheology of methylcellulose thermogelation
Methylcellulose is well known for its thermoreversible gelation. Here, we utilize a fractional viscoelastic constitutive framework to analyze the time-, temperature-, and concentration-dependent behavior of the thermorheologically complex system formed by methylcellulose in water. We characterize the viscoelastic moduli using small amplitude oscillatory shear tests conducted over a wide temperature range (15 ≤ T ≤ 80 °C), which captures the evolving rheological responses associated with fibrillar microstructure formation on heating and dissolution on cooling. Depending on the temperature, the measured rheological responses are well described by the Scott Blair model of a critical gel or the fractional Kelvin–Voigt spring model, which provide a compact description of the evolving viscoelastic properties of methylcellulose. Below the fibril formation temperature, we observe the rheological response of a “clear gel” sustained by transient hydrophobic associations. Upon fibril formation, we observe a substantial change in the viscoelastic properties; the storage modulus grows dramatically, leading to the formation of highly elastic fibrillar gels whose power-law rheology is well described by the Scott Blair model. These changes with temperature and frequency are represented using a Cole–Cole representation. A distinct thermal hysteresis is associated with the thermogelation transition, which depends on the heating or cooling rate imposed. Analysis of the evolution in the material properties with temperature and concentration shows that a phenomenological scaling law effectively describes the fibril formation and dissolution processes across a range of methylcellulose compositions. This scaling law simplifies the analysis of large datasets and provides physical interpretability of the observed thermogelation phenomena.
- Open Access
- 31 October 2025
- Published by Society of Rheology in Journal of Rheology
- Vol. 69 (6) , 1059-1066
Bayesian optimization to infer parameters in viscoelasticity
Inferring viscoelasticity parameters is a key challenge that often leads to nonunique solutions when fitting rheological data. In this context, we utilize Bayesian optimization for parameter inference within curve-fitting processes. To fit a viscoelastic model to rheological data, the Bayesian optimization maps via a surrogate model the parameter values to a given error function. It then exploits the mapped space to identify parameter combinations that minimize the error. We compare the results of Bayesian optimization with traditional fitting routines and find that, while the Bayesian method requires a similar number of iterations to achieve a fit for a viscoelastic model, it does incur a higher computational cost. In sum, despite higher cost, Bayesian optimization provides a white-box framework that explicitly models the error landscape via the surrogate mean and uncertainty, using an acquisition function to target informative regions and enhance supervised parameter estimation in linear viscoelasticity.
- 31 October 2025
- Published by Society of Rheology in Journal of Rheology
- Vol. 69 (6) , 1059-1066
Open AccessBayesian optimization to infer parameters in viscoelasticity
Inferring viscoelasticity parameters is a key challenge that often leads to nonunique solutions when fitting rheological data. In this context, we utilize Bayesian optimization for parameter inference within curve-fitting processes. To fit a viscoelastic model to rheological data, the Bayesian optimization maps via a surrogate model the parameter values to a given error function. It then exploits the mapped space to identify parameter combinations that minimize the error. We compare the results of Bayesian optimization with traditional fitting routines and find that, while the Bayesian method requires a similar number of iterations to achieve a fit for a viscoelastic model, it does incur a higher computational cost. In sum, despite higher cost, Bayesian optimization provides a white-box framework that explicitly models the error landscape via the surrogate mean and uncertainty, using an acquisition function to target informative regions and enhance supervised parameter estimation in linear viscoelasticity.
- Open Access
- 20 March 2025
- Published by Royal Society of Chemistry (RSC) in Digital Discovery
- Vol. 4 (4) , 1075-1082
pyRheo: an open-source Python package for complex rheology
Mathematical modeling is a powerful tool in rheology, and we present pyRheo, an open-source package for Python designed to streamline the analysis of creep, stress relaxation, small amplitude oscillatory shear, and steady shear flow tests.
- 20 March 2025
- Published by Royal Society of Chemistry (RSC) in Digital Discovery
- Vol. 4 (4) , 1075-1082
Open AccesspyRheo: an open-source Python package for complex rheology
Mathematical modeling is a powerful tool in rheology, and we present pyRheo, an open-source package for Python designed to streamline the analysis of creep, stress relaxation, small amplitude oscillatory shear, and steady shear flow tests.
- 7 March 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 134 (9) , 098202
Crack Propagation by Activated Avalanches during Creep and Fatigue from Elastic Interface Theory
The growth of cracks combines materials science, fracture mechanics, and statistical physics. The importance of fluctuations in the crack velocity is fundamental since it signals that the crack overcomes local barriers such as tough spots by avalanches. In ductile materials the omnipresent plasticity close to the crack tip influences the growth by history effects, which we here study in polymethylmetacrylate by various fatigue and creep protocols. We show how the crack tip local history may be encompassed in a time- and protocol-dependent length scale, which allows us to apply a statistical fracture description to the time-dependent crack growth rate, resolving the well-known paradox why fatigue cracks grow faster if the stress during a cycle is let to relax more from the peak value. The results open up novel directions for understanding fracture by statistical physics.
- 7 March 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 134 (9) , 098202
Crack Propagation by Activated Avalanches during Creep and Fatigue from Elastic Interface Theory
The growth of cracks combines materials science, fracture mechanics, and statistical physics. The importance of fluctuations in the crack velocity is fundamental since it signals that the crack overcomes local barriers such as tough spots by avalanches. In ductile materials the omnipresent plasticity close to the crack tip influences the growth by history effects, which we here study in polymethylmetacrylate by various fatigue and creep protocols. We show how the crack tip local history may be encompassed in a time- and protocol-dependent length scale, which allows us to apply a statistical fracture description to the time-dependent crack growth rate, resolving the well-known paradox why fatigue cracks grow faster if the stress during a cycle is let to relax more from the peak value. The results open up novel directions for understanding fracture by statistical physics.
- Open Access
- 7 January 2025
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 709
Thermogelation of methylcellulose: A rheological approach with Gaussian Process Regression
- 7 January 2025
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 709
Open AccessThermogelation of methylcellulose: A rheological approach with Gaussian Process Regression
- Open Access
- 6 December 2024
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 12 (6) , 1855-1862
Accelerated design of solid bio-based foams for plastics substitutes
Our framework enables the use of fast measurements in an auxiliary space (the liquid state) to predict the target material properties (mechanical strength of dry material), instead of slow sample manufacture (foam forming and mechanical tests).
- 6 December 2024
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 12 (6) , 1855-1862
Open AccessAccelerated design of solid bio-based foams for plastics substitutes
Our framework enables the use of fast measurements in an auxiliary space (the liquid state) to predict the target material properties (mechanical strength of dry material), instead of slow sample manufacture (foam forming and mechanical tests).
- Open Access
- 4 July 2024
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 20 (28) , 5607-5615
A simple approach to produce hydrophobic biobased coatings using methylcellulose and organosolv lignin
By utilizing a particular method, organosolv lignin was used to produce biobased coatings that demonstrated water-resistant properties with water contact angles greater than 90°.
- 4 July 2024
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 20 (28) , 5607-5615
Open AccessA simple approach to produce hydrophobic biobased coatings using methylcellulose and organosolv lignin
By utilizing a particular method, organosolv lignin was used to produce biobased coatings that demonstrated water-resistant properties with water contact angles greater than 90°.
- Open Access
- 1 March 2024
- Published by AIP Publishing in APL Machine Learning
- Vol. 2 (1)
Improving the mechanical properties of Cantor-like alloys with Bayesian optimization
The search for better compositions in high entropy alloys is a formidable challenge in materials science. Here, we demonstrate a systematic Bayesian optimization method to enhance the mechanical properties of the paradigmatic five-element Cantor alloy in silico. This method utilizes an automated loop with an online database, a Bayesian optimization algorithm, thermodynamic modeling, and molecular dynamics simulations. Starting from the equiatomic Cantor composition, our approach optimizes the relative fractions of its constituent elements, searching for better compositions while maintaining the thermodynamic phase stability. With 24 steps, we find Fe21Cr20Mn5Co20Ni34 with a yield stress improvement of 58%, and with 72 steps, we find Fe6Cr22Mn5Co32Ni35 where the yield stress has improved by 74%. These optimized compositions correspond to Ni-rich medium entropy alloys with enhanced mechanical properties and superior face-centered-cubic phase stability compared to the traditional equiatomic Cantor alloy. The automatic approach devised here paves the way for designing high entropy alloys with tailored properties, opening avenues for numerous potential applications.
- 1 March 2024
- Published by AIP Publishing in APL Machine Learning
- Vol. 2 (1)
Open AccessImproving the mechanical properties of Cantor-like alloys with Bayesian optimization
The search for better compositions in high entropy alloys is a formidable challenge in materials science. Here, we demonstrate a systematic Bayesian optimization method to enhance the mechanical properties of the paradigmatic five-element Cantor alloy in silico. This method utilizes an automated loop with an online database, a Bayesian optimization algorithm, thermodynamic modeling, and molecular dynamics simulations. Starting from the equiatomic Cantor composition, our approach optimizes the relative fractions of its constituent elements, searching for better compositions while maintaining the thermodynamic phase stability. With 24 steps, we find Fe21Cr20Mn5Co20Ni34 with a yield stress improvement of 58%, and with 72 steps, we find Fe6Cr22Mn5Co32Ni35 where the yield stress has improved by 74%. These optimized compositions correspond to Ni-rich medium entropy alloys with enhanced mechanical properties and superior face-centered-cubic phase stability compared to the traditional equiatomic Cantor alloy. The automatic approach devised here paves the way for designing high entropy alloys with tailored properties, opening avenues for numerous potential applications.
- Open Access
- 23 September 2023
- Published by Elsevier in Journal of Energy Storage
- Vol. 73
Cellulose foams as scalable templates for phase change materials
- 23 September 2023
- Published by Elsevier in Journal of Energy Storage
- Vol. 73
Open AccessCellulose foams as scalable templates for phase change materials