Hengliang Wu
Hengliang Wu has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Xiaofei Lei
Xi’an Jiaotong University
3 shared publications Chengjun Wu
School of Mechanical Engineering, Xi’an Jiaotong University, People’s Republic of China
2 shared publicationsHeping Hou
School of Printing, Packaging Engineering and Digital Media Technology, Xi’an University of Technology, Xi’an, P.R. China
1 shared publicationJianyong Wang
Shanghai Marine Diesel Engine Research Institute (SMDERI), People’s Republic of China
1 shared publicationNan Wu
School of Printing, Packaging Engineering and Digital Media Technology, Xi’an University of Technology, Xi’an, P.R. China
1 shared publication- Zhanpeng Zheng
School of Mechanical Engineering, Xi'an Jiaotong University, P.R. China
1 shared publication
Latest Publications
- 17 March 2023
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 30 (5-6) , 1214-1226
Composite collaborative acoustic metamaterials: Isolating shaft vibration of guide roller in printing machine
During the operation of the unit type gravure press, the violent mechanical vibration generated by the guide roller will seriously affect the stability of the unit operation, and causing transmission faults such as wrinkle, offset, scratch or fracture, and reducing the printing accuracy. To this problem, a novel multi-approach composite collaborative vibration isolator which combines the local resonator and multi-layer composite structure is proposed to solve the problems of vibration suppression in the single frequency and vibration energy dissipation in the full frequency band, respectively, and the theoretical model on the proposed isolator is established basing on dynamic stiffness method. For demonstrating isolation performance, the regularized normalized modal displacement, power loss density, elastic strain energy density, total kinetic energy, and vibration transmission ratio can be discussed. The results show that the composite vibration isolator has a wide vibration isolation band, and the vibration wave has two attenuation bands within 0–2000 Hz. The first attenuation band is 188–224 Hz and the width is 36 Hz; the second attenuation band is greater than 328 Hz. When the band of the vibration isolator is above 700 Hz, the vibration transmission ratio shows a monotonous decreasing trend. Furthermore, an experimental platform for the vibration isolation device of the guide roller is established to verify the vibration isolation performance. When the drive motor frequency is 20 Hz, the composite vibration isolator has the best vibration isolation effect. At the same time, the vibration isolation effect gradually decreases with the increase of the guide roller speed, but it still has preferable vibration isolation performance under various working conditions.
- 17 March 2023
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 30 (5-6) , 1214-1226
Composite collaborative acoustic metamaterials: Isolating shaft vibration of guide roller in printing machine
During the operation of the unit type gravure press, the violent mechanical vibration generated by the guide roller will seriously affect the stability of the unit operation, and causing transmission faults such as wrinkle, offset, scratch or fracture, and reducing the printing accuracy. To this problem, a novel multi-approach composite collaborative vibration isolator which combines the local resonator and multi-layer composite structure is proposed to solve the problems of vibration suppression in the single frequency and vibration energy dissipation in the full frequency band, respectively, and the theoretical model on the proposed isolator is established basing on dynamic stiffness method. For demonstrating isolation performance, the regularized normalized modal displacement, power loss density, elastic strain energy density, total kinetic energy, and vibration transmission ratio can be discussed. The results show that the composite vibration isolator has a wide vibration isolation band, and the vibration wave has two attenuation bands within 0–2000 Hz. The first attenuation band is 188–224 Hz and the width is 36 Hz; the second attenuation band is greater than 328 Hz. When the band of the vibration isolator is above 700 Hz, the vibration transmission ratio shows a monotonous decreasing trend. Furthermore, an experimental platform for the vibration isolation device of the guide roller is established to verify the vibration isolation performance. When the drive motor frequency is 20 Hz, the composite vibration isolator has the best vibration isolation effect. At the same time, the vibration isolation effect gradually decreases with the increase of the guide roller speed, but it still has preferable vibration isolation performance under various working conditions.
- 28 November 2018
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 25 (5) , 1122-1130
Vibration isolation performance of nonobstructive particle damping in a machine rack
Nonobstructive particle damping (NOPD) is a novel passive control technology with strong nonlinear-damping. Many scholars put effort into the research on the internal mechanism of NOPD. In contrast, the application of NOPD to engineering has not received much research effort. A theoretical model based on the principle of gas–solid flows, which is employed to evaluate damping effect of NOPD and to predict dynamic response of a machine rack by a co-simulation approach, is established in this paper. In view of the difference between damping effect acting on the lateral and bottom of NOPD holes directly, total damping force is divided into lateral damping force and bottom damping force according to the Janssen theory of stress changed direction. Moreover, NOPD technology is applied to a machine rack for discussing its vibration isolation performance. The results indicate that NOPD technology can suppress the intense vibration, especially between 4000 Hz and 8000 Hz. It is noted that the theoretical model of NOPD can accurately predict the dynamic response of the machine rack with NOPD. The 1/3 Octave vibration energy spectrum indicates that NOPD technics can dissipate the vibration energy of the machine rack at full frequency, especially in 31.5 Hz, and attenuation up to 39.75 dB.
- 28 November 2018
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 25 (5) , 1122-1130
Vibration isolation performance of nonobstructive particle damping in a machine rack
Nonobstructive particle damping (NOPD) is a novel passive control technology with strong nonlinear-damping. Many scholars put effort into the research on the internal mechanism of NOPD. In contrast, the application of NOPD to engineering has not received much research effort. A theoretical model based on the principle of gas–solid flows, which is employed to evaluate damping effect of NOPD and to predict dynamic response of a machine rack by a co-simulation approach, is established in this paper. In view of the difference between damping effect acting on the lateral and bottom of NOPD holes directly, total damping force is divided into lateral damping force and bottom damping force according to the Janssen theory of stress changed direction. Moreover, NOPD technology is applied to a machine rack for discussing its vibration isolation performance. The results indicate that NOPD technology can suppress the intense vibration, especially between 4000 Hz and 8000 Hz. It is noted that the theoretical model of NOPD can accurately predict the dynamic response of the machine rack with NOPD. The 1/3 Octave vibration energy spectrum indicates that NOPD technics can dissipate the vibration energy of the machine rack at full frequency, especially in 31.5 Hz, and attenuation up to 39.75 dB.
- 28 August 2017
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 24 (19) , 4407-4418
A novel composite vibration control method using double-decked floating raft isolation system and particle damper
This paper presents a composite vibration control method that uses a double-decked floating raft isolation system and particle dampers to control the severe vibration of a heavy compressor set. In view of the structural characteristics of the compressor set, a mechanical impedance method is employed to investigate the acceleration transfer ratios of the double-decked floating raft isolation system, and to design three isolating schemes. Numerical results indicate that the particle damping technology does not disturb the isolating performance of the double-decked floating raft isolation system while reducing only its acceleration amplitude. To improve the damping performance of particle dampers, an anti-resonance method and a co-simulation technique are used to optimize the installation location of the particle dampers, as the damping effect is related to the vibrating velocity at the damper’s position. Furthermore, two types of particle damper—cylindrical and cuboid—are designed, based on conclusions drawn from experiments using the anti-resonance method. The damping effectiveness of the particle damper scheme is also examined using the co-simulation technique; results indicate that the proposed installation scheme can effectively suppress the vibration of the compressor rack. In addition, the presented schemes using the composite vibration control method are verified and compared in on-site experiments, and results demonstrate that the third isolating scheme presented, combined with particle damping technology, is best in controlling vibration of the compressor set.
- 28 August 2017
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 24 (19) , 4407-4418
A novel composite vibration control method using double-decked floating raft isolation system and particle damper
This paper presents a composite vibration control method that uses a double-decked floating raft isolation system and particle dampers to control the severe vibration of a heavy compressor set. In view of the structural characteristics of the compressor set, a mechanical impedance method is employed to investigate the acceleration transfer ratios of the double-decked floating raft isolation system, and to design three isolating schemes. Numerical results indicate that the particle damping technology does not disturb the isolating performance of the double-decked floating raft isolation system while reducing only its acceleration amplitude. To improve the damping performance of particle dampers, an anti-resonance method and a co-simulation technique are used to optimize the installation location of the particle dampers, as the damping effect is related to the vibrating velocity at the damper’s position. Furthermore, two types of particle damper—cylindrical and cuboid—are designed, based on conclusions drawn from experiments using the anti-resonance method. The damping effectiveness of the particle damper scheme is also examined using the co-simulation technique; results indicate that the proposed installation scheme can effectively suppress the vibration of the compressor rack. In addition, the presented schemes using the composite vibration control method are verified and compared in on-site experiments, and results demonstrate that the third isolating scheme presented, combined with particle damping technology, is best in controlling vibration of the compressor set.