Xun Hong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xun Hong has a total of 353 co-authors. Here are the top co-authors by number of shared publications:
Geng Wu
State Key Laboratory of Advanced Environmental Technology Department of Environmental Science and Engineering Department of Applied Chemistry Center of Advanced Nanocatalysis (CAN) University of Science & Technology of China Hefei China
43 shared publicationsXiao Han
State Key Laboratory of Advanced Environmental Technology Department of Environmental Science and Engineering Department of Applied Chemistry Center of Advanced Nanocatalysis (CAN) University of Science & Technology of China Hefei China
35 shared publications- Yuen Wu
University of Science and Technology of China
28 shared publications - Yadong Li
Tsinghua University
24 shared publications Xusheng Zheng
National Synchrotron Radiation Laboratory (NSRL) University of Science and Technology of China Hefei 230026 P. R. China
15 shared publicationsYanmin Hu
Center of Advanced Nanocatalysis (CAN), Department of Applied Chemistry, University of Science and Technology of China, Hefei, China
14 shared publications
Latest Publications
- 7 September 2026
- Published by Springer Nature in Nature Nanotechnology
- Vol. 21 (11) , 1605-1612
Switchable single-atom catalysts for highly selective C–C coupling in direct methane oxidation
Direct selective conversion of methane into high value-added chemical products has long attracted attention in both industry and academia. The production of C2 oxygenates is especially challenging owing to the requirement for both C–H activation and C–C coupling. Here we report a boron nanosheet-supported Cu single atom with Cu–B4 sites (Cu-SAs/B), which can effectively catalyse the conversion of methane to acetic acid with 97% selectivity and a high activity of 221.3 mmol gCu−1 h−1 without the addition of CO. In situ X-ray absorption fine structure analysis reveals that Cu single atoms undergo reversible ‘switching’ to Cu4 clusters under CH4 oxidation conditions, enabling efficient C–H activation and C–C coupling. The switching behaviour is triggered by the presence of H2O2, and the coupling occurs between CH3* and CHO* intermediates formed on Cu single atoms and Cu clusters, respectively, as confirmed by in situ spectroscopic techniques. These findings provide a proof of concept for designing highly effective methane oxidation catalysts based on switchable nanocatalysts.
- 7 September 2026
- Published by Springer Nature in Nature Nanotechnology
- Vol. 21 (11) , 1605-1612
Switchable single-atom catalysts for highly selective C–C coupling in direct methane oxidation
Direct selective conversion of methane into high value-added chemical products has long attracted attention in both industry and academia. The production of C2 oxygenates is especially challenging owing to the requirement for both C–H activation and C–C coupling. Here we report a boron nanosheet-supported Cu single atom with Cu–B4 sites (Cu-SAs/B), which can effectively catalyse the conversion of methane to acetic acid with 97% selectivity and a high activity of 221.3 mmol gCu−1 h−1 without the addition of CO. In situ X-ray absorption fine structure analysis reveals that Cu single atoms undergo reversible ‘switching’ to Cu4 clusters under CH4 oxidation conditions, enabling efficient C–H activation and C–C coupling. The switching behaviour is triggered by the presence of H2O2, and the coupling occurs between CH3* and CHO* intermediates formed on Cu single atoms and Cu clusters, respectively, as confirmed by in situ spectroscopic techniques. These findings provide a proof of concept for designing highly effective methane oxidation catalysts based on switchable nanocatalysts.
- 2 April 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (20)
Cathodic‐Potential‐Induced Amorphous TiO x Layer for Glycerol Valorization
Electrochemical oxidation offers a low‐carbon pathway for glycerol valorization, yet it remains constrained by the inherent trade‐off between activity and selectivity toward high value‐added products. Here, we create H doped amorphous layer (H‐a‐TiO x ) on anatase TiO 2 , thus enabling 992 mmol m − 2 h − 1 glycerol‐to‐glyceraldehyde conversion with >80% selectivity while demonstrating scalable and economically sustainable performance. X‐ray absorption spectroscopy and solid‐state 1 H magic angle spinning NMR spectra reveal that H‐a‐TiO x exhibits reduced Ti–O coordination due to oxygen stripping, along with strengthened second shell Ti─Ti coordination arising from interstitial hydrogen incorporation. Mechanistic investigations indicate that hydrogen‐bond strengthening around adsorbed hydroxyl (*OH) raises the energy barrier for C─C bond cleavage, whereas enhanced localization of *OH lowers that for C─H bond activation, thereby overcoming the activity–selectivity trade‐off for glyceraldehyde production. This work outlines a practical phase‐engineering strategy that enables sustainable electrosynthesis with earth‐abundant metal oxides.
- 2 April 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (20)
Cathodic‐Potential‐Induced Amorphous TiO x Layer for Glycerol Valorization
Electrochemical oxidation offers a low‐carbon pathway for glycerol valorization, yet it remains constrained by the inherent trade‐off between activity and selectivity toward high value‐added products. Here, we create H doped amorphous layer (H‐a‐TiO x ) on anatase TiO 2 , thus enabling 992 mmol m − 2 h − 1 glycerol‐to‐glyceraldehyde conversion with >80% selectivity while demonstrating scalable and economically sustainable performance. X‐ray absorption spectroscopy and solid‐state 1 H magic angle spinning NMR spectra reveal that H‐a‐TiO x exhibits reduced Ti–O coordination due to oxygen stripping, along with strengthened second shell Ti─Ti coordination arising from interstitial hydrogen incorporation. Mechanistic investigations indicate that hydrogen‐bond strengthening around adsorbed hydroxyl (*OH) raises the energy barrier for C─C bond cleavage, whereas enhanced localization of *OH lowers that for C─H bond activation, thereby overcoming the activity–selectivity trade‐off for glyceraldehyde production. This work outlines a practical phase‐engineering strategy that enables sustainable electrosynthesis with earth‐abundant metal oxides.
- 2 April 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (20) , e6575286
Cathodic‐Potential‐Induced Amorphous TiO x Layer for Glycerol Valorization
Electrochemical oxidation offers a low‐carbon pathway for glycerol valorization, yet it remains constrained by the inherent trade‐off between activity and selectivity toward high value‐added products. Here, we create H doped amorphous layer (H‐a‐TiO x ) on anatase TiO 2 , thus enabling 992 mmol m − 2 h − 1 glycerol‐to‐glyceraldehyde conversion with >80% selectivity while demonstrating scalable and economically sustainable performance. X‐ray absorption spectroscopy and solid‐state 1 H magic angle spinning NMR spectra reveal that H‐a‐TiO x exhibits reduced Ti–O coordination due to oxygen stripping, along with strengthened second shell Ti─Ti coordination arising from interstitial hydrogen incorporation. Mechanistic investigations indicate that hydrogen‐bond strengthening around adsorbed hydroxyl (*OH) raises the energy barrier for C─C bond cleavage, whereas enhanced localization of *OH lowers that for C─H bond activation, thereby overcoming the activity–selectivity trade‐off for glyceraldehyde production. This work outlines a practical phase‐engineering strategy that enables sustainable electrosynthesis with earth‐abundant metal oxides.
- 2 April 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (20) , e6575286
Cathodic‐Potential‐Induced Amorphous TiO x Layer for Glycerol Valorization
Electrochemical oxidation offers a low‐carbon pathway for glycerol valorization, yet it remains constrained by the inherent trade‐off between activity and selectivity toward high value‐added products. Here, we create H doped amorphous layer (H‐a‐TiO x ) on anatase TiO 2 , thus enabling 992 mmol m − 2 h − 1 glycerol‐to‐glyceraldehyde conversion with >80% selectivity while demonstrating scalable and economically sustainable performance. X‐ray absorption spectroscopy and solid‐state 1 H magic angle spinning NMR spectra reveal that H‐a‐TiO x exhibits reduced Ti–O coordination due to oxygen stripping, along with strengthened second shell Ti─Ti coordination arising from interstitial hydrogen incorporation. Mechanistic investigations indicate that hydrogen‐bond strengthening around adsorbed hydroxyl (*OH) raises the energy barrier for C─C bond cleavage, whereas enhanced localization of *OH lowers that for C─H bond activation, thereby overcoming the activity–selectivity trade‐off for glyceraldehyde production. This work outlines a practical phase‐engineering strategy that enables sustainable electrosynthesis with earth‐abundant metal oxides.
- 19 March 2026
- Published by Wiley in Advanced Materials
- p. e20300
Phase Engineering of Amorphous Ru‐O‐C 60 for Efficient Electrosynthesis of Sulfoxides
The diverse short/medium‐range structures of amorphous nanomaterials dictate their phase structures, which ultimately govern their catalytic behaviors. However, the inherent high Gibbs free energy caused by disordered atomic arrangement makes the controlled phase regulation of amorphous nanomaterials challenging. Herein, we regulated the phase structure of amorphous RuO x nanosheets by constructing a novel amorphous Ru‐O‐C 60 motif. Integrated differential phase contrast image confirms the incorporation and spatial distribution of C 60 within the amorphous RuO x nanosheets. X‐ray absorption fine structure measurements reveal that amorphous RuO x nanosheets anchored onto C 60 (A‐RuO x /C 60 NSs) possess an edge‐sharing RuO 6 octahedral configuration. The A‐RuO x /C 60 NSs exhibit outstanding performance in the electro‐oxidation of methyl phenyl sulfide, achieving 99.1% conversion, 99.63% selectivity, 99.57% Faradaic efficiency, and excellent stability over 50 cycles, while maintaining high conversion and selectivity toward various para‐ and meta‐substituted methyl phenyl sulfide derivatives. Density functional theory calculations reveal that the edge‐sharing RuO 6 octahedral configuration enhances methyl phenyl sulfide adsorption, facilitate Ru─O bond cleavage and S═O bond formation, thereby accelerating product formation and release. Moreover, the synthesis strategy is extendable to the preparation of various monometallic and bimetallic amorphous oxides/C 60 nanosheets.
- 19 March 2026
- Published by Wiley in Advanced Materials
- p. e20300
Phase Engineering of Amorphous Ru‐O‐C 60 for Efficient Electrosynthesis of Sulfoxides
The diverse short/medium‐range structures of amorphous nanomaterials dictate their phase structures, which ultimately govern their catalytic behaviors. However, the inherent high Gibbs free energy caused by disordered atomic arrangement makes the controlled phase regulation of amorphous nanomaterials challenging. Herein, we regulated the phase structure of amorphous RuO x nanosheets by constructing a novel amorphous Ru‐O‐C 60 motif. Integrated differential phase contrast image confirms the incorporation and spatial distribution of C 60 within the amorphous RuO x nanosheets. X‐ray absorption fine structure measurements reveal that amorphous RuO x nanosheets anchored onto C 60 (A‐RuO x /C 60 NSs) possess an edge‐sharing RuO 6 octahedral configuration. The A‐RuO x /C 60 NSs exhibit outstanding performance in the electro‐oxidation of methyl phenyl sulfide, achieving 99.1% conversion, 99.63% selectivity, 99.57% Faradaic efficiency, and excellent stability over 50 cycles, while maintaining high conversion and selectivity toward various para‐ and meta‐substituted methyl phenyl sulfide derivatives. Density functional theory calculations reveal that the edge‐sharing RuO 6 octahedral configuration enhances methyl phenyl sulfide adsorption, facilitate Ru─O bond cleavage and S═O bond formation, thereby accelerating product formation and release. Moreover, the synthesis strategy is extendable to the preparation of various monometallic and bimetallic amorphous oxides/C 60 nanosheets.
- Open Access
- 1 February 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 19 (2)
Ultrathin amorphous Ru 0.91 Ta 0.09 O x nanosheets for enhanced electrochemical stability in acidic oxygen evolution reaction
Efficient Ru-based catalysts are crucial for reducing reliance on costly Ir in acidic oxygen evolution reaction (OER). However, Ru-based oxides suffer from severe Ru dissolution and overoxidation under acidic conditions, limiting practical application. Here, we synthesized ultrathin amorphous Ru0.91Ta0.09Ox nanosheets with a thickness of 2.2 nm. The O K-edge XANES spectra reveal a positive shift in the t₂g peak for A-Ru0.91Ta0.09Ox NSs, indicating reduced Ru-O bond covalency. Notably, A-Ru0.91Ta0.09Oₓ NSs exhibit outstanding acidic OER performance, delivering a low overpotential of 185 mV at 10 mA cm-2. Moreover, the chronoamperometry stability test shows A-Ru0.91Ta0.09Oₓ NSs maintained a much more stable current density over 105 hours compared to A-RuOx NSs and C-RuO2. The Ru 3p XPS spectra at different potentials reveal that Ta transfers electrons to Ru, suppressing peroxidation and reducing Ru dissolution, which accounts for the enhanced stability of A-Ru0.91Ta0.09Ox NSs. Furthermore, the enhanced stability of A-Ru0.97Nb0.03Ox NSs and A-Ru0.82W0.18Ox NSs further validate the general applicability of integrating corrosion-resistant metals with amorphous RuOx nanosheets to boost acidic OER stability.
- 1 February 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 19 (2)
Open AccessUltrathin amorphous Ru 0.91 Ta 0.09 O x nanosheets for enhanced electrochemical stability in acidic oxygen evolution reaction
Efficient Ru-based catalysts are crucial for reducing reliance on costly Ir in acidic oxygen evolution reaction (OER). However, Ru-based oxides suffer from severe Ru dissolution and overoxidation under acidic conditions, limiting practical application. Here, we synthesized ultrathin amorphous Ru0.91Ta0.09Ox nanosheets with a thickness of 2.2 nm. The O K-edge XANES spectra reveal a positive shift in the t₂g peak for A-Ru0.91Ta0.09Ox NSs, indicating reduced Ru-O bond covalency. Notably, A-Ru0.91Ta0.09Oₓ NSs exhibit outstanding acidic OER performance, delivering a low overpotential of 185 mV at 10 mA cm-2. Moreover, the chronoamperometry stability test shows A-Ru0.91Ta0.09Oₓ NSs maintained a much more stable current density over 105 hours compared to A-RuOx NSs and C-RuO2. The Ru 3p XPS spectra at different potentials reveal that Ta transfers electrons to Ru, suppressing peroxidation and reducing Ru dissolution, which accounts for the enhanced stability of A-Ru0.91Ta0.09Ox NSs. Furthermore, the enhanced stability of A-Ru0.97Nb0.03Ox NSs and A-Ru0.82W0.18Ox NSs further validate the general applicability of integrating corrosion-resistant metals with amorphous RuOx nanosheets to boost acidic OER stability.
- 27 November 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (49) , 44825-44833
Single-Atom-Layer-Induced Reversed Diffusion Pathway of Reactive Metal–Support Interaction
Reactive metal-support interaction (RMSI) exhibits great potential in modulating the component, configuration, and electronic structure of supported metal catalysts. While current experimental and theoretical studies both regard that RMSI occurs through one-step diffusion of metal atoms from the support toward the supported nanoparticles, our study reveals a reversed diffusion pathway during RMSI, where Pt atoms in the supported nanoparticles spread out on the support to form a single-atom-layer Pt before the incorporation of Ti elements from the support in Pt/TiO2. The single-atom-layer Pt, identified by in situ heating aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), could weaken Ti-O bonds through electron transfer, facilitate surface oxygen release and following Ti atom migration toward Pt, ultimately enabling intermetallic compound (IMC) formation. The elucidated formation mechanism with a single-atom-layer Pt offers guidance for reducing the diffusion energy barrier of metal atoms within the support to ensure the effective formation of an IMC. The resulting Pt3Ti IMC, featuring electron-rich Pt active sites with a downshifted d-band center, exhibits exceptional resistance to CO poisoning during electrocatalytic hydrogen oxidation.
- 27 November 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (49) , 44825-44833
Single-Atom-Layer-Induced Reversed Diffusion Pathway of Reactive Metal–Support Interaction
Reactive metal-support interaction (RMSI) exhibits great potential in modulating the component, configuration, and electronic structure of supported metal catalysts. While current experimental and theoretical studies both regard that RMSI occurs through one-step diffusion of metal atoms from the support toward the supported nanoparticles, our study reveals a reversed diffusion pathway during RMSI, where Pt atoms in the supported nanoparticles spread out on the support to form a single-atom-layer Pt before the incorporation of Ti elements from the support in Pt/TiO2. The single-atom-layer Pt, identified by in situ heating aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), could weaken Ti-O bonds through electron transfer, facilitate surface oxygen release and following Ti atom migration toward Pt, ultimately enabling intermetallic compound (IMC) formation. The elucidated formation mechanism with a single-atom-layer Pt offers guidance for reducing the diffusion energy barrier of metal atoms within the support to ensure the effective formation of an IMC. The resulting Pt3Ti IMC, featuring electron-rich Pt active sites with a downshifted d-band center, exhibits exceptional resistance to CO poisoning during electrocatalytic hydrogen oxidation.
- 18 August 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (35) , 20365-20374
Atomic-scale investigation of the role of supports in nanocrystal growth
This work conducted an in situ TEM study on how the metal–support interactions can direct the anisotropic growth of metals, resulting in tailored surface structures and electronic properties that enhance the electrocatalytic CO2 reduction.
- 18 August 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (35) , 20365-20374
Atomic-scale investigation of the role of supports in nanocrystal growth
This work conducted an in situ TEM study on how the metal–support interactions can direct the anisotropic growth of metals, resulting in tailored surface structures and electronic properties that enhance the electrocatalytic CO2 reduction.
- 13 May 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (20) , 8211-8219
Optimization of Short-Range Order in Amorphous AlOx Nanosheets for Enhanced Methane Oxidation
Heterogeneous catalysts often undergo dynamic evolution during catalysis, forming true active sites. Amorphous materials, due to their inherent structural flexibility, are particularly prone to evolution and self-adaptation under catalytic conditions. Herein, we demonstrate that the short-range order of an Al-O polyhedron in amorphous aluminum oxide nanosheets undergoes a transformation from a mixed AlO6, AlO5, and AlO4 configuration to a randomly connected AlO6 structure during both hydrothermal treatment and direct methane oxidation, confirmed by time-series 27Al solid-state NMR spectroscopy. The resulting structural changes induce nanosheet wrinkling and a 5-fold increase in specific surface area, concomitant with a transition from weak to moderately strong basic sites, enabling the amorphous nanosheets to efficiently activate hydrogen peroxide and generate hydroxyl radicals. When coupled with supported Cu single atoms, the catalysis achieves an exceptional C1 liquid oxygenate production rate of 5202 mmol gCu-1 h-1 with nearly 100% selectivity during methane oxidation.
- 13 May 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (20) , 8211-8219
Optimization of Short-Range Order in Amorphous AlOx Nanosheets for Enhanced Methane Oxidation
Heterogeneous catalysts often undergo dynamic evolution during catalysis, forming true active sites. Amorphous materials, due to their inherent structural flexibility, are particularly prone to evolution and self-adaptation under catalytic conditions. Herein, we demonstrate that the short-range order of an Al-O polyhedron in amorphous aluminum oxide nanosheets undergoes a transformation from a mixed AlO6, AlO5, and AlO4 configuration to a randomly connected AlO6 structure during both hydrothermal treatment and direct methane oxidation, confirmed by time-series 27Al solid-state NMR spectroscopy. The resulting structural changes induce nanosheet wrinkling and a 5-fold increase in specific surface area, concomitant with a transition from weak to moderately strong basic sites, enabling the amorphous nanosheets to efficiently activate hydrogen peroxide and generate hydroxyl radicals. When coupled with supported Cu single atoms, the catalysis achieves an exceptional C1 liquid oxygenate production rate of 5202 mmol gCu-1 h-1 with nearly 100% selectivity during methane oxidation.
- 23 April 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (18) , 15686-15692
Phase Engineering of Atomically Dispersed Fe-Doped Amorphous RuOx Nanosheets via Amorphous–Amorphous Transition for Oxygen Activation
Amorphous nanomaterials with identical compositions can possess distinct atomic structures, which significantly influence their performance, underscoring the importance of phase engineering in amorphous nanomaterials. However, the high Gibbs free energy and complex structures associated with their disordered atomic arrangements pose a significant challenge to the phase engineering of amorphous nanomaterials. Herein, we achieved phase engineering of atomically dispersed Fe-doped amorphous RuOx nanosheets (A-Fe1/RuOx NSs) through amorphous-amorphous transition strategies. Specifically, as confirmed by X-ray absorption fine structure measurements, the Fe coordination environment in A-Fe1/RuOx NSs was regulated from FeO4 tetrahedral to FeO6 octahedral, driven by amorphous-amorphous transition, resulting in two distinct Ru-Fe pair configurations of A-Fe1/RuOx NSs: one with a connected tetrahedral FeO4-octahedral RuO6 configuration and the other one with a connected octahedral FeO6-octahedral RuO6 configuration. Density functional theory calculations demonstrated that the structure differences of the Ru-Fe pair efficiently regulated the adsorption mode of the O2 molecules from top adsorption to bridge adsorption on an amorphous surface. Consequently, the A-Fe1/RuOx NSs with a connected tetrahedral FeO4-octahedral RuO6 configuration exhibited an enhanced formation of superoxide radicals during oxidative dehydrogenation reactions, resulting in remarkable catalytic activity in the synthesis of indole, indole derivatives, and quinoline.
- 23 April 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (18) , 15686-15692
Phase Engineering of Atomically Dispersed Fe-Doped Amorphous RuOx Nanosheets via Amorphous–Amorphous Transition for Oxygen Activation
Amorphous nanomaterials with identical compositions can possess distinct atomic structures, which significantly influence their performance, underscoring the importance of phase engineering in amorphous nanomaterials. However, the high Gibbs free energy and complex structures associated with their disordered atomic arrangements pose a significant challenge to the phase engineering of amorphous nanomaterials. Herein, we achieved phase engineering of atomically dispersed Fe-doped amorphous RuOx nanosheets (A-Fe1/RuOx NSs) through amorphous-amorphous transition strategies. Specifically, as confirmed by X-ray absorption fine structure measurements, the Fe coordination environment in A-Fe1/RuOx NSs was regulated from FeO4 tetrahedral to FeO6 octahedral, driven by amorphous-amorphous transition, resulting in two distinct Ru-Fe pair configurations of A-Fe1/RuOx NSs: one with a connected tetrahedral FeO4-octahedral RuO6 configuration and the other one with a connected octahedral FeO6-octahedral RuO6 configuration. Density functional theory calculations demonstrated that the structure differences of the Ru-Fe pair efficiently regulated the adsorption mode of the O2 molecules from top adsorption to bridge adsorption on an amorphous surface. Consequently, the A-Fe1/RuOx NSs with a connected tetrahedral FeO4-octahedral RuO6 configuration exhibited an enhanced formation of superoxide radicals during oxidative dehydrogenation reactions, resulting in remarkable catalytic activity in the synthesis of indole, indole derivatives, and quinoline.
- Top Cited Papers
- 3 January 2025
- Published by Springer Nature in Nature Synthesis
- Vol. 4 (3) , 370-379
Synthesis of amorphous metal oxides via a crystalline to amorphous phase transition strategy
- 3 January 2025
- Published by Springer Nature in Nature Synthesis
- Vol. 4 (3) , 370-379
Top Cited PapersSynthesis of amorphous metal oxides via a crystalline to amorphous phase transition strategy