Cristina Medina
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Cristina Medina has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Luis Alberto Padrón
Instituto Universitario de Sistemas Inteligentes y Aplicaciones Numéricas en Ingeniería (SIANI), Universidad de Las Palmas de Gran Canaria (ULPGC), Edificio Central del Parque Científico y Tecnológico, Campus Universitario de Tafira, 34017 Las Palmas de Gran Canaria, Spain
7 shared publications - Juan José Aznárez
Instituto Universitario de Sistemas Inteligentes y Aplicaciones Numéricas en Ingeniería, Universidad de Las Palmas de Gran Canaria, Campus de Tafira, 35017 Las Palmas, Spain
6 shared publications - Orlando Maeso
Universidad de Las Palmas de Gran Canaria
5 shared publications - Guillermo M. Álamo
Instituto Universitario de Sistemas Inteligentes y Aplicaciones Numéricas en Ingeniería, Universidad de Las Palmas de Gran Canaria, Campus de Tafira, 35017 Las Palmas, Spain
4 shared publications - Jacob David Rodríguez Bordón
Instituto Universitario de Sistemas Inteligentes y Aplicaciones Numéricas en Ingeniería, Universidad de Las Palmas de Gran Canaria, Campus de Tafira, 35017 Las Palmas, Spain
2 shared publications - Román Quevedo-Reina
Instituto Universitario de Sistemas Inteligentes y Aplicaciones Numéricas en Ingeniería, Universidad de Las Palmas de Gran Canaria, Campus de Tafira, 35017 Las Palmas, Spain
2 shared publications
Latest Publications
- Open Access
Noise Levels Due to Commercial and Leisure Activities in Urban Areas: Experimental Validation of a Numerical Model Fed with Crowd Density Estimation Using Computer Vision
Noise levels of anthropogenic origin in urban environments have reached thresholds that pose serious public health and quality of life problems. This paper/work aims to examine these noise levels, the underlying causes of their increase and possible solutions through the implementation of predictive models. To address this problem, as a first step, a simplified mathematical model capable of accurately predicting anthropogenic noise levels in a given area is developed. As variables, this model considers the crowd density, estimated using an Artificial Neural Network (ANN) capable of detecting people in images, as well as the geometric and architectural characteristics of the environment. To verify the model, several protocols have been developed for collecting experimental data. In a first phase, these experimental measurements were carried out in controlled environments, using loudspeakers as noise sources. In a second phase, these measurements were carried out in real environments, accounting for the specific noise sources present in each setting. The difference in sound levels between the model and reality is proven to be less than 3 dB in 75% and less than 3.5 dB in 100% of the cases examined in a controlled environment. In the real problem, in general terms and taking into account that the study is carried out on pedestrian streets, it seems that the model is able to reproduce most of the noise of anthropogenic origin.
Open AccessNoise Levels Due to Commercial and Leisure Activities in Urban Areas: Experimental Validation of a Numerical Model Fed with Crowd Density Estimation Using Computer Vision
Noise levels of anthropogenic origin in urban environments have reached thresholds that pose serious public health and quality of life problems. This paper/work aims to examine these noise levels, the underlying causes of their increase and possible solutions through the implementation of predictive models. To address this problem, as a first step, a simplified mathematical model capable of accurately predicting anthropogenic noise levels in a given area is developed. As variables, this model considers the crowd density, estimated using an Artificial Neural Network (ANN) capable of detecting people in images, as well as the geometric and architectural characteristics of the environment. To verify the model, several protocols have been developed for collecting experimental data. In a first phase, these experimental measurements were carried out in controlled environments, using loudspeakers as noise sources. In a second phase, these measurements were carried out in real environments, accounting for the specific noise sources present in each setting. The difference in sound levels between the model and reality is proven to be less than 3 dB in 75% and less than 3.5 dB in 100% of the cases examined in a controlled environment. In the real problem, in general terms and taking into account that the study is carried out on pedestrian streets, it seems that the model is able to reproduce most of the noise of anthropogenic origin.
- 11 March 2025
- Published by Elsevier in Ocean Engineering
- Vol. 326
Kinematic response of flexible suction caissons for offshore wind turbines to vertically incident shear waves
- 11 March 2025
- Published by Elsevier in Ocean Engineering
- Vol. 326
Kinematic response of flexible suction caissons for offshore wind turbines to vertically incident shear waves
- Open Access
- 27 May 2023
- Published by Elsevier in Ocean Engineering
- Vol. 280
Contribution of the rotational kinematic interaction to the seismic response of monopile-supported offshore wind turbines
- 27 May 2023
- Published by Elsevier in Ocean Engineering
- Vol. 280
Open AccessContribution of the rotational kinematic interaction to the seismic response of monopile-supported offshore wind turbines
- Open Access
- 18 November 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (11) , 1285
Evolution of the Seismic Response of Monopile-Supported Offshore Wind Turbines of Increasing Size from 5 to 15 MW including Dynamic Soil-Structure Interaction
As a result of wind power’s expansion over the globe, offshore wind turbines (OWTs) are being projected in seismic prone areas. In parallel, the industry develops increasingly larger and more powerful generators. Many of the seismic response analyses of wind turbines conducted so far only consider smaller units. In this paper, a finite element substructuring model in frequency domain is used to compute the seismic response of four reference OWTs from 5 to 15 MW founded on monopiles embedded in several homogeneous soil profiles with shear wave velocities from 100 to 300 m/s and subjected to different accelerograms. The foundation behaviour is obtained through a continuum model including kinematic and inertial interaction. The relevance of soil-structure interaction and main trends of the seismic response of OWTs are inferred from the presented results. Although the seismic maximum bending moments increase with the size of the OWT system, their relevance with respect to the ones produced by design loads decreases as the turbine gets bigger. The same effect is observed for the shear forces if the soil is soft enough. The inclusion of SSI effects almost duplicates the seismic response when compared to the rigid base scenario.
- 18 November 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (11) , 1285
Open AccessEvolution of the Seismic Response of Monopile-Supported Offshore Wind Turbines of Increasing Size from 5 to 15 MW including Dynamic Soil-Structure Interaction
As a result of wind power’s expansion over the globe, offshore wind turbines (OWTs) are being projected in seismic prone areas. In parallel, the industry develops increasingly larger and more powerful generators. Many of the seismic response analyses of wind turbines conducted so far only consider smaller units. In this paper, a finite element substructuring model in frequency domain is used to compute the seismic response of four reference OWTs from 5 to 15 MW founded on monopiles embedded in several homogeneous soil profiles with shear wave velocities from 100 to 300 m/s and subjected to different accelerograms. The foundation behaviour is obtained through a continuum model including kinematic and inertial interaction. The relevance of soil-structure interaction and main trends of the seismic response of OWTs are inferred from the presented results. Although the seismic maximum bending moments increase with the size of the OWT system, their relevance with respect to the ones produced by design loads decreases as the turbine gets bigger. The same effect is observed for the shear forces if the soil is soft enough. The inclusion of SSI effects almost duplicates the seismic response when compared to the rigid base scenario.
- 1 July 2019
- Published by Elsevier in Engineering Structures
- Vol. 190, 76-89
Application of regression models for the estimation of the flexible-base period of pile-supported structures in continuously inhomogeneous soils
- 1 July 2019
- Published by Elsevier in Engineering Structures
- Vol. 190, 76-89
Application of regression models for the estimation of the flexible-base period of pile-supported structures in continuously inhomogeneous soils
- 15 March 2019
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 48 (7) , 772-791
Variations in the dynamic response of structures founded on piles induced by obliquely incident SV waves
Summary: Although the seismic actions generally consist of a combination of waves, which propagates with an angle of incidence not necessarily vertical, the common practice when analyzing the dynamic behavior of pile groups is based on the assumption of vertically incident wave fields. The aim of this paper is to analyze how the angle of incidence of SV waves affects the dynamic response of pile foundations and piled structures. A three‐dimensional boundary element‐finite element coupling formulation is used to compute impedances and kinematic interaction factors corresponding to several configurations of vertical pile groups embedded in an isotropic homogeneous linear viscoelastic half‐space. These results, which are provided in ready‐to‐use dimensionless graphs, are used to determine the effective dynamic properties of an equivalent single‐degree‐of‐freedom oscillator that reproduces, within the range where the peak response occurs, the response of slender and nonslender superstructures through a procedure based on a substructuring model. Results are expressed in terms of effective flexible‐base period and damping as well as maximum shear force at the base of the structure. The relevance and main trends observed in the influence of the wavefront angle of incidence on the dynamic behavior of the superstructure are inferred from the presented results. It is found that effective damping is significantly affected by the variations of the wave angle of incidence. Furthermore, it comes out that the vertical incidence is not always the worst‐case scenario.
- 15 March 2019
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 48 (7) , 772-791
Variations in the dynamic response of structures founded on piles induced by obliquely incident SV waves
Summary: Although the seismic actions generally consist of a combination of waves, which propagates with an angle of incidence not necessarily vertical, the common practice when analyzing the dynamic behavior of pile groups is based on the assumption of vertically incident wave fields. The aim of this paper is to analyze how the angle of incidence of SV waves affects the dynamic response of pile foundations and piled structures. A three‐dimensional boundary element‐finite element coupling formulation is used to compute impedances and kinematic interaction factors corresponding to several configurations of vertical pile groups embedded in an isotropic homogeneous linear viscoelastic half‐space. These results, which are provided in ready‐to‐use dimensionless graphs, are used to determine the effective dynamic properties of an equivalent single‐degree‐of‐freedom oscillator that reproduces, within the range where the peak response occurs, the response of slender and nonslender superstructures through a procedure based on a substructuring model. Results are expressed in terms of effective flexible‐base period and damping as well as maximum shear force at the base of the structure. The relevance and main trends observed in the influence of the wavefront angle of incidence on the dynamic behavior of the superstructure are inferred from the presented results. It is found that effective damping is significantly affected by the variations of the wave angle of incidence. Furthermore, it comes out that the vertical incidence is not always the worst‐case scenario.
- Open Access
- 1 February 2015
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 69, 196-206
Influence of pile inclination angle on the dynamic properties and seismic response of piled structures
- 1 February 2015
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 69, 196-206
Open AccessInfluence of pile inclination angle on the dynamic properties and seismic response of piled structures
- 20 May 2014
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 43 (13) , 2035-2050
Kinematic interaction factors of deep foundations with inclined piles
SUMMARY: The beneficial or detrimental role of battered piles on the dynamic response of piled foundations has not been yet fully elucidated. In order to shed more light on this aspect, kinematic interaction factors of deep foundations with inclined piles, are provided for single‐battered piles, as well as for 2 × 2 and 3 × 3 groups of piles subjected to vertically incident plane shear S waves. Piles are modelled as linear‐elastic Bernoulli beams, whereas soil is assumed to be a linear, isotropic, homogeneous viscoelastic half‐space. Different pile group configurations, pile‐soil stiffness ratios, and rake angles are considered. The relevance and main trends observed in the influence of the rake angle on the kinematic interaction factors of the analysed foundations are inferred from the presented results. An important dependence of the kinematic interaction factors on the rake angle is observed together with the existence of an inclination angle at which cap rotation and excitation become out of phase in the low‐to‐mid frequency range. The existence of a small batter angle that provides minimum cap rotation is also shown. Copyright © 2014 John Wiley & Sons, Ltd.
- 20 May 2014
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 43 (13) , 2035-2050
Kinematic interaction factors of deep foundations with inclined piles
SUMMARY: The beneficial or detrimental role of battered piles on the dynamic response of piled foundations has not been yet fully elucidated. In order to shed more light on this aspect, kinematic interaction factors of deep foundations with inclined piles, are provided for single‐battered piles, as well as for 2 × 2 and 3 × 3 groups of piles subjected to vertically incident plane shear S waves. Piles are modelled as linear‐elastic Bernoulli beams, whereas soil is assumed to be a linear, isotropic, homogeneous viscoelastic half‐space. Different pile group configurations, pile‐soil stiffness ratios, and rake angles are considered. The relevance and main trends observed in the influence of the rake angle on the kinematic interaction factors of the analysed foundations are inferred from the presented results. An important dependence of the kinematic interaction factors on the rake angle is observed together with the existence of an inclination angle at which cap rotation and excitation become out of phase in the low‐to‐mid frequency range. The existence of a small batter angle that provides minimum cap rotation is also shown. Copyright © 2014 John Wiley & Sons, Ltd.
- 1 October 2013
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 53, 160-175
Effects of soil–structure interaction on the dynamic properties and seismic response of piled structures
- 1 October 2013
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 53, 160-175
Effects of soil–structure interaction on the dynamic properties and seismic response of piled structures