Jonathan Fulford
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Jonathan Fulford has a total of 265 co-authors. Here are the top co-authors by number of shared publications:
Andrew M. Jones
Sport and Health Sciences, College of Life and Environmental Sciences, University of Exeter, Exeter, UK
19 shared publicationsAnni Vanhatalo
Department of Sport and Health Sciences, College of Life and Environmental Sciences, University of Exeter, St. Luke's Campus, Exeter, United Kingdom
19 shared publications- Stephen J. Bailey
Loughborough University
19 shared publications - Andrew Mark Jones
Department of Public Health and Sport Sciences, University of Exeter, Exeter, UK
14 shared publications - Alan Robert Barker
University of Exeter
12 shared publications - Joanna Lucy Bowtell
Department of Sport and Health Sciences, University of Exeter, St Luke's Campus
10 shared publications
Latest Publications
- Open Access
- 11 December 2024
- Published by Georg Thieme Verlag KG in Sports Medicine International Open
- Vol. 09 (CP) , a24876175
Assessing the Potential of Hand Grip Strength as an Indicator of Spinal Muscle Size
In order to assess how well hand grip strength can predict spinal muscle size and to determine if scaling improves prediction, Biobank data was acquired consisting of hand grip strength, age, height, body mass and abdominal magnetic resonance images for 150 age-matched male and female participants. The cross-sectional area of the multifidus and erector spinae was measured from the images at the L3/L4 level. Correlation strength and prediction errors were quantified for muscle size predicted from hand grip strength, age, height, and body mass. The effect of scaling muscle area by height and height squared was also determined. All variables correlated significantly with spine muscle size. The strongest correlator was hand grip strength (r=0.61, p2. The strength of the correlations was reduced when muscle areas were scaled. Hand grip strength can predict spine muscle size in male and female participants; however, the confidence intervals on the predicted values are larger than would be expected from measuring muscle size directly using imaging technologies. Scaling by height or height squared does not improve the ability of hand grip strength to predict muscle size. Received: 25 June 2024 Accepted: 11 December 2024 Accepted Manuscript online: 11 December 2024 Article published online: 22 April 2025 © 2025. The Author(s). This is an open access article published by Thieme under the terms of the Creative Commons Attribution-NonDerivative-NonCommercial-License, permitting copying and reproduction so long as the original work is given appropriate credit. Contents may not be used for commercial purposes, or adapted, remixed, transformed or built upon. (https://creativecommons.org/licenses/by-nc-nd/4.0/). Georg Thieme Verlag KG Oswald-Hesse-Straße 50, 70469 Stuttgart, Germany
- 11 December 2024
- Published by Georg Thieme Verlag KG in Sports Medicine International Open
- Vol. 09 (CP) , a24876175
Open AccessAssessing the Potential of Hand Grip Strength as an Indicator of Spinal Muscle Size
In order to assess how well hand grip strength can predict spinal muscle size and to determine if scaling improves prediction, Biobank data was acquired consisting of hand grip strength, age, height, body mass and abdominal magnetic resonance images for 150 age-matched male and female participants. The cross-sectional area of the multifidus and erector spinae was measured from the images at the L3/L4 level. Correlation strength and prediction errors were quantified for muscle size predicted from hand grip strength, age, height, and body mass. The effect of scaling muscle area by height and height squared was also determined. All variables correlated significantly with spine muscle size. The strongest correlator was hand grip strength (r=0.61, p2. The strength of the correlations was reduced when muscle areas were scaled. Hand grip strength can predict spine muscle size in male and female participants; however, the confidence intervals on the predicted values are larger than would be expected from measuring muscle size directly using imaging technologies. Scaling by height or height squared does not improve the ability of hand grip strength to predict muscle size. Received: 25 June 2024 Accepted: 11 December 2024 Accepted Manuscript online: 11 December 2024 Article published online: 22 April 2025 © 2025. The Author(s). This is an open access article published by Thieme under the terms of the Creative Commons Attribution-NonDerivative-NonCommercial-License, permitting copying and reproduction so long as the original work is given appropriate credit. Contents may not be used for commercial purposes, or adapted, remixed, transformed or built upon. (https://creativecommons.org/licenses/by-nc-nd/4.0/). Georg Thieme Verlag KG Oswald-Hesse-Straße 50, 70469 Stuttgart, Germany
- Open Access
- 10 December 2024
- Published by Elsevier in The Journal of nutrition, health and aging
- Vol. 29 (2) , 100429
Provision of a daily high protein and high energy meal: Effects on the physical and psychological wellbeing of community-dwelling, malnourished older adults; a randomised crossover trial
- 10 December 2024
- Published by Elsevier in The Journal of nutrition, health and aging
- Vol. 29 (2) , 100429
Open AccessProvision of a daily high protein and high energy meal: Effects on the physical and psychological wellbeing of community-dwelling, malnourished older adults; a randomised crossover trial
- Open Access
- 20 May 2024
- Published by Elsevier in Radiography
- Vol. 30 (4) , 1085-1092
Within-participants reliability and measurement error of magnetization transfer imaging determinations within the healthy cervical spinal cord
- 20 May 2024
- Published by Elsevier in Radiography
- Vol. 30 (4) , 1085-1092
Open AccessWithin-participants reliability and measurement error of magnetization transfer imaging determinations within the healthy cervical spinal cord
- Open Access
- 7 March 2024
- Published by Elsevier in Magnetic Resonance Imaging
- Vol. 109, 56-66
Diffusion tensor imaging within the healthy cervical spinal cord: Within- participants reliability and measurement error
- 7 March 2024
- Published by Elsevier in Magnetic Resonance Imaging
- Vol. 109, 56-66
Open AccessDiffusion tensor imaging within the healthy cervical spinal cord: Within- participants reliability and measurement error
- Open Access
- 1 November 2023
- Published by Oxford University Press (OUP) in British Journal of Radiology
- Vol. 96 (1151) , 20221019
A systematic review of repeatability and reproducibility studies of diffusion tensor imaging of cervical spinal cord
Objectives: Diffusion tensor imaging (DTI) techniques are being studied as a possible diagnostic and predictive tool for the evaluation of cervical spinal cord disease. This systematic review aims to evaluate the previous DTI studies that specifically investigated the repeatability and reproducibility of DTI in the cervical spinal cord. Methods and materials: A search in the PubMed, Scopus, Web of Science and Ovid electronic databases was conducted for articles published between January 1990 and February 2022 that related to the repeatability and reproducibility of DTI in evaluating the cervical spinal cord using one of the following measurements: the intraclass correlation coefficient (ICC) and/or the coefficient of variation (CV), and/or Bland-Altman (BA) differences analysis methods. DTI studies that presented full statistical analysis of repeatability and/or reproducibility tests of the cervical spinal cord in peer-reviewed full-text publications published in journals were included. Articles that included at least one of the keywords within the titles or abstracts were identified. Additional full-text papers were found by searching the citations and reference lists of related articles. This review has followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidance. Risk of bias was evaluated with 13 criteria weighted toward methodological quality of reported studies using the QuADS assessment criteria. This assessment only included full-text articles written in English. Results: A total of 11 studies were included and assessed for different characteristics, including sample size,(3–34) re-test time interval (3 months), test-retest reproducibility scores and acquisition method. Six studies used ICC which ranged from poor (ICC<0.37) to excellent reproducibility (ICC 0.91–0.99). Four studies reported an overall CV lower than 40% for all DTI metrics. Three studies reported the Bland-Altman (BA) differences and reported a minimum percentage showing no strong differences between repeated measurements. Quantitative analysis was not undertaken due to heterogeneity of methods. Repeatability and reproducibility measures were generally found to be good. Conclusion: This study revealed that the application of DTI and its related measures in a clinical setting in the assessment of cervical spinal cord changes is feasible and reproducible. However, cervical spinal cord DTI suffers from some existing limitations that prevent it from being routinely used in research and clinical settings. Advances in knowledge: DTI with its parametric maps provide broad evaluation of the tissue structure of axonal white matter and are being studied as a possible diagnostic and predictive tool for the assessment of cervical spinal cord (CSC) disease.
- 1 November 2023
- Published by Oxford University Press (OUP) in British Journal of Radiology
- Vol. 96 (1151) , 20221019
Open AccessA systematic review of repeatability and reproducibility studies of diffusion tensor imaging of cervical spinal cord
Objectives: Diffusion tensor imaging (DTI) techniques are being studied as a possible diagnostic and predictive tool for the evaluation of cervical spinal cord disease. This systematic review aims to evaluate the previous DTI studies that specifically investigated the repeatability and reproducibility of DTI in the cervical spinal cord. Methods and materials: A search in the PubMed, Scopus, Web of Science and Ovid electronic databases was conducted for articles published between January 1990 and February 2022 that related to the repeatability and reproducibility of DTI in evaluating the cervical spinal cord using one of the following measurements: the intraclass correlation coefficient (ICC) and/or the coefficient of variation (CV), and/or Bland-Altman (BA) differences analysis methods. DTI studies that presented full statistical analysis of repeatability and/or reproducibility tests of the cervical spinal cord in peer-reviewed full-text publications published in journals were included. Articles that included at least one of the keywords within the titles or abstracts were identified. Additional full-text papers were found by searching the citations and reference lists of related articles. This review has followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidance. Risk of bias was evaluated with 13 criteria weighted toward methodological quality of reported studies using the QuADS assessment criteria. This assessment only included full-text articles written in English. Results: A total of 11 studies were included and assessed for different characteristics, including sample size,(3–34) re-test time interval (3 months), test-retest reproducibility scores and acquisition method. Six studies used ICC which ranged from poor (ICC<0.37) to excellent reproducibility (ICC 0.91–0.99). Four studies reported an overall CV lower than 40% for all DTI metrics. Three studies reported the Bland-Altman (BA) differences and reported a minimum percentage showing no strong differences between repeated measurements. Quantitative analysis was not undertaken due to heterogeneity of methods. Repeatability and reproducibility measures were generally found to be good. Conclusion: This study revealed that the application of DTI and its related measures in a clinical setting in the assessment of cervical spinal cord changes is feasible and reproducible. However, cervical spinal cord DTI suffers from some existing limitations that prevent it from being routinely used in research and clinical settings. Advances in knowledge: DTI with its parametric maps provide broad evaluation of the tissue structure of axonal white matter and are being studied as a possible diagnostic and predictive tool for the assessment of cervical spinal cord (CSC) disease.
- 16 November 2022
- Published by Elsevier in European Journal of Radiology
- Vol. 158, 110600
The principles and effectiveness of X-ray scatter correction software for diagnostic X-ray imaging: A scoping review
- 16 November 2022
- Published by Elsevier in European Journal of Radiology
- Vol. 158, 110600
The principles and effectiveness of X-ray scatter correction software for diagnostic X-ray imaging: A scoping review
- Open Access
- 30 March 2022
- Published by Oxford University Press (OUP) in BJR|Open
- Vol. 4 (1) , 20210051
The impact of altering participant MRI scanning position on back muscle volume measurements
Objectives: Muscle volume may reflect both strength and functional capability and hence is a parameter often measured to assess the effect of various interventions. The aim of the current study was to determine the sensitivity of muscle volume calculations on participant postural position and hence gauge possible errors that may arise in longitudinal studies, especially those where an intervention leads to large muscle changes and potentially the degree of spinal curvature. Methods: Twenty healthy participants (22–49 years, 10 male and 10 female), were recruited and MRI images acquired with them lying in four different positions; neutral spine (P1), decreased lordosis (P2), increased lordosis (P3) and neutral spine repeated (P4). Images were analysed in Simpleware ScanIP, and lumbar muscle volume and Cobb’s angle, as an indicator of spine curvature, determined. Results: After comparing volume determinations, no statistically significant differences were found for P1 - P2 and P1 - P4, whereas significant changes were determined for P2 - P3 and P1 - P3. P2 and P3 represent the two extremes of spinal curvature with a difference in Cobb’s angle of 17°. However, the mean difference between volume determinations was only 29 cm3. These results suggest the differences in muscle volume determinations are generally greater with increasing differences in curvature between measurements, but that overall the effects are small. Conclusions: Thus, generally, spinal muscle volume determinations are robust in terms of participant positioning. Advances in knowledge: Differences in muscle volume calculations appear to become larger the greater the difference in spinal curvature between positions. Thus, spinal curvature should not have a major impact on the results of spinal muscle volume determinations following interventions in longitudinal studies.
- 30 March 2022
- Published by Oxford University Press (OUP) in BJR|Open
- Vol. 4 (1) , 20210051
Open AccessThe impact of altering participant MRI scanning position on back muscle volume measurements
Objectives: Muscle volume may reflect both strength and functional capability and hence is a parameter often measured to assess the effect of various interventions. The aim of the current study was to determine the sensitivity of muscle volume calculations on participant postural position and hence gauge possible errors that may arise in longitudinal studies, especially those where an intervention leads to large muscle changes and potentially the degree of spinal curvature. Methods: Twenty healthy participants (22–49 years, 10 male and 10 female), were recruited and MRI images acquired with them lying in four different positions; neutral spine (P1), decreased lordosis (P2), increased lordosis (P3) and neutral spine repeated (P4). Images were analysed in Simpleware ScanIP, and lumbar muscle volume and Cobb’s angle, as an indicator of spine curvature, determined. Results: After comparing volume determinations, no statistically significant differences were found for P1 - P2 and P1 - P4, whereas significant changes were determined for P2 - P3 and P1 - P3. P2 and P3 represent the two extremes of spinal curvature with a difference in Cobb’s angle of 17°. However, the mean difference between volume determinations was only 29 cm3. These results suggest the differences in muscle volume determinations are generally greater with increasing differences in curvature between measurements, but that overall the effects are small. Conclusions: Thus, generally, spinal muscle volume determinations are robust in terms of participant positioning. Advances in knowledge: Differences in muscle volume calculations appear to become larger the greater the difference in spinal curvature between positions. Thus, spinal curvature should not have a major impact on the results of spinal muscle volume determinations following interventions in longitudinal studies.
- Open Access
- 7 August 2020
- Published by Taylor & Francis in Journal of Medical Engineering & Technology
- Vol. 44 (7) , 368-377
Three dimensional finite element modelling of metatarsal stresses during running
Second metatarsal stress fractures are a problematic injury for runners and are formed when the rate of repair of bone is outpaced by the damage accumulated during loading. Measuring the peak stresses on the bone during running gives an indication of damage accumulation but direct measurement is invasive. Finite element modelling is a viable alternative method of accurately estimating bone stresses but tends to be too computationally expensive for use in applied research. This study presents a novel and simple finite element model which can estimate bone stresses on the second metatarsal during the stance phase of walking and running, accounting for joint reaction forces and soft tissue effects. The influence of the forces and kinematic inputs to the model and the presence of the soft tissues was quantified using a sensitivity analysis. The magnitudes of maximum stress from the model are similar to existing finite element models and bone staple strain gauge values collected during walking and running. The model was found to be most sensitive to the pitch angle of the metatarsal and the joint reaction forces and was less sensitive to the ground reaction forces under the metatarsal head, suggesting that direct measurement of external forces should not be assumed to represent internal stresses.
- 7 August 2020
- Published by Taylor & Francis in Journal of Medical Engineering & Technology
- Vol. 44 (7) , 368-377
Open AccessThree dimensional finite element modelling of metatarsal stresses during running
Second metatarsal stress fractures are a problematic injury for runners and are formed when the rate of repair of bone is outpaced by the damage accumulated during loading. Measuring the peak stresses on the bone during running gives an indication of damage accumulation but direct measurement is invasive. Finite element modelling is a viable alternative method of accurately estimating bone stresses but tends to be too computationally expensive for use in applied research. This study presents a novel and simple finite element model which can estimate bone stresses on the second metatarsal during the stance phase of walking and running, accounting for joint reaction forces and soft tissue effects. The influence of the forces and kinematic inputs to the model and the presence of the soft tissues was quantified using a sensitivity analysis. The magnitudes of maximum stress from the model are similar to existing finite element models and bone staple strain gauge values collected during walking and running. The model was found to be most sensitive to the pitch angle of the metatarsal and the joint reaction forces and was less sensitive to the ground reaction forces under the metatarsal head, suggesting that direct measurement of external forces should not be assumed to represent internal stresses.
- Open Access
- 1 May 2020
- Published by Elsevier in Journal of Biomechanics
- Vol. 105, 109792
Incorporating subject-specific geometry to compare metatarsal stress during running with different foot strike patterns
- 1 May 2020
- Published by Elsevier in Journal of Biomechanics
- Vol. 105, 109792
Open AccessIncorporating subject-specific geometry to compare metatarsal stress during running with different foot strike patterns