Stanislaw Dunin-Horkawicz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Stanislaw Dunin-Horkawicz has a total of 284 co-authors. Here are the top co-authors by number of shared publications:
- Janusz M. Bujnicki
Laboratory of Bioinformatics and Protein Engineering, International Institute of Molecular and Cell Biology in Warsaw, Poland
18 shared publications - Jan Ludwiczak
Prescient Design, Genentech, South San Francisco, CA, USA
15 shared publications - Andrei N. Lupas
Max Planck Institute for Biology, Tübingen, Germany
12 shared publications Andrei N. Lupas
Department of Protein Evolution, Max Planck Institute for Biology Tübingen, Tübingen, Germany
8 shared publicationsKamil Kaminski
8 shared publicationsAleksander Winski
Laboratory of Structural Bioinformatics, Centre of New Technologies University of Warsaw Warsaw Poland
6 shared publications
Latest Publications
- Open Access
Simulating protein evolution with programmable fitness objectives derived from modern protein models
Simulation of protein sequence evolution provides a controlled way to test whether specified evolutionary mechanisms can generate the patterns observed in natural proteins. However, classical simulation largely relies on fixed substitution rules, whereas existing fitness-based simulations often define fitness using a single proxy and thus do not sufficiently capture the complex nature of constraints imposed by selection. Here, we simulate protein evolution through amino acid substitutions under programmable fitness objectives derived from individual or combined protein models, including protein language models, inverse folding models, physics-based energy functions, and alignment-based statistical models. Evaluation of simulations revealed that different fitness proxies impose distinct trade-offs between evolutionary realism and molecular plausibility, motivating the use of combined objectives to redistribute selective pressure across complementary constraints. We then show that programmable fitness objectives can encode mechanism-specific biological contexts. Incorporating oligomeric structural context recovered interface-specific evolutionary constraints in homodimeric proteins, while multi-conformation objectives better reproduced natural sequence variation in metamorphic proteins and provided interpretable estimates of how alternative native folds contribute to evolutionary constraint. Finally, we explore a differentiable extension of this framework, in which structural objectives are backpropagated through AlphaFold2 to guide sequence evolution. Under this formulation, evolved sequences showed favorable shifts in several molecular properties relative to those from discrete, stepwise mutation-selection simulations while retaining key evolutionary signatures.
Open AccessSimulating protein evolution with programmable fitness objectives derived from modern protein models
Simulation of protein sequence evolution provides a controlled way to test whether specified evolutionary mechanisms can generate the patterns observed in natural proteins. However, classical simulation largely relies on fixed substitution rules, whereas existing fitness-based simulations often define fitness using a single proxy and thus do not sufficiently capture the complex nature of constraints imposed by selection. Here, we simulate protein evolution through amino acid substitutions under programmable fitness objectives derived from individual or combined protein models, including protein language models, inverse folding models, physics-based energy functions, and alignment-based statistical models. Evaluation of simulations revealed that different fitness proxies impose distinct trade-offs between evolutionary realism and molecular plausibility, motivating the use of combined objectives to redistribute selective pressure across complementary constraints. We then show that programmable fitness objectives can encode mechanism-specific biological contexts. Incorporating oligomeric structural context recovered interface-specific evolutionary constraints in homodimeric proteins, while multi-conformation objectives better reproduced natural sequence variation in metamorphic proteins and provided interpretable estimates of how alternative native folds contribute to evolutionary constraint. Finally, we explore a differentiable extension of this framework, in which structural objectives are backpropagated through AlphaFold2 to guide sequence evolution. Under this formulation, evolved sequences showed favorable shifts in several molecular properties relative to those from discrete, stepwise mutation-selection simulations while retaining key evolutionary signatures.
- Open Access
- 6 August 2026
- Published by Wiley in Protein Science
- Vol. 35 (9)
Conformational diversity in poly‐ HAMP arrays and its implications for signal transduction
Prokaryotic transmembrane receptors are built around a helical coiled‐coil backbone, with sensory, modulatory, and effector domains arranged along its length. The modulatory HAMP domain forms a parallel four‐helix coiled coil integrated into this backbone, typically connecting transmembrane segments with downstream cytosolic domains. In many systems, HAMP domains transduce signals through axial rotation of their helices; however, it is not clear how broadly applicable this mechanism is. Here, we describe two families of soluble chemoreceptors and sensory kinases that contain long arrays of concatenated HAMP domains, which we term poly‐HAMP. Although these poly‐HAMP arrays evolved independently, both families share sequence features consistent with convergence on a similar functional system. We determined the crystal structures of 4‐HAMP and 6‐HAMP segments from the poly‐HAMP array of histidine kinase AskA of Myxococcus xanthus , revealing unusually close packing between adjacent domains and conformational patterns compatible with the rotational signaling model. To define the broader conformational landscape, we computed AlphaFold2 models for over 200 chemoreceptor‐ and kinase‐associated arrays. The models were consistent with the AskA structures, yet revealed distinct preferences: chemoreceptor arrays were predicted to adopt stable conformations, whereas kinase arrays more frequently adopted potentially less favorable conformations. When modeled in isolation from neighboring domains, HAMP domains from kinase arrays adopted alternative conformations related to their array‐embedded forms by axial helix rotation. Taken together, our results suggest that, despite their independent origins, HAMP‐containing systems including poly‐HAMP arrays and canonical single‐HAMP receptors may share a conserved mode of conformational plasticity involving axial helix rotation.
- 6 August 2026
- Published by Wiley in Protein Science
- Vol. 35 (9)
Open AccessConformational diversity in poly‐ HAMP arrays and its implications for signal transduction
Prokaryotic transmembrane receptors are built around a helical coiled‐coil backbone, with sensory, modulatory, and effector domains arranged along its length. The modulatory HAMP domain forms a parallel four‐helix coiled coil integrated into this backbone, typically connecting transmembrane segments with downstream cytosolic domains. In many systems, HAMP domains transduce signals through axial rotation of their helices; however, it is not clear how broadly applicable this mechanism is. Here, we describe two families of soluble chemoreceptors and sensory kinases that contain long arrays of concatenated HAMP domains, which we term poly‐HAMP. Although these poly‐HAMP arrays evolved independently, both families share sequence features consistent with convergence on a similar functional system. We determined the crystal structures of 4‐HAMP and 6‐HAMP segments from the poly‐HAMP array of histidine kinase AskA of Myxococcus xanthus , revealing unusually close packing between adjacent domains and conformational patterns compatible with the rotational signaling model. To define the broader conformational landscape, we computed AlphaFold2 models for over 200 chemoreceptor‐ and kinase‐associated arrays. The models were consistent with the AskA structures, yet revealed distinct preferences: chemoreceptor arrays were predicted to adopt stable conformations, whereas kinase arrays more frequently adopted potentially less favorable conformations. When modeled in isolation from neighboring domains, HAMP domains from kinase arrays adopted alternative conformations related to their array‐embedded forms by axial helix rotation. Taken together, our results suggest that, despite their independent origins, HAMP‐containing systems including poly‐HAMP arrays and canonical single‐HAMP receptors may share a conserved mode of conformational plasticity involving axial helix rotation.
- Open Access
Beyond profiles: supervised repeat annotation using protein embeddings
Protein repeats give rise to diverse protein structures and functions, yet their sequence-based detection is often challenging because individual repeat units can diverge substantially in sequence while retaining similar structures. Most sensitive approaches rely on sequence information directly represented by alignments or derived profiles, thereby limiting flexibility and scalability. Here, we introduce TREAD ( T ransfer learning-based RE peat A nnotation using Protein Embe D dings), a supervised framework that reformulates repeat detection as a residue-level annotation problem and operates directly on embeddings from protein language models. Instead of constructing explicit probabilistic profiles, TREAD learns repeat-specific features implicitly, enabling residue-resolved scoring and flexible repeat segment extraction. Across complementary benchmarks based on RepeatsDB and Pfam, TREAD consistently matches or outperforms the widely used profile-based tool HMMER, particularly in low-data and high-divergence settings. The model exhibits robustness to score thresholding and demonstrates better generalization to independent test sets, including those containing remotely related families. To illustrate the practical utility of TREAD, we applied it to survey β-propeller proteins across the AlphaFold Database and representative proteomes to generate a comprehensive census of this fold. This analysis highlights extensive propeller diversity, identifies lineage-specific expansion patterns across the tree of life, and suggests previously unrecognized relationships between propellers and other repeat folds. Together, TREAD provides a flexible and scalable alternative to profile-based repeat annotation and establishes a general motif-centric framework for protein sequence annotation. Author Summary: Many proteins are assembled from repeated building blocks. These repeats have helped evolution generate a remarkable variety of structures and functions. Yet sensitive detection of individual repeats has long been challenging because their sequences can diverge substantially even when their structures remain similar. Conventional methods often rely on comparing large collections of related sequences to find these patterns. We developed TREAD, a computational method that learns from annotated examples to recognize protein repeats using information captured by protein language models. Rather than building conventional sequence profiles, TREAD identifies repeat units and their boundaries directly from these learned protein representations. In systematic benchmarks, it matched or outperformed HMMER, a widely used profile-based method, particularly when few examples were available or repeat sequences were highly divergent. We then used TREAD to survey β-propellers, proteins assembled from repeated blade-like units, across millions of protein sequences. We uncovered substantial unexplored diversity, differences in their abundance and associated functions across organisms, and unexpected similarities to a previously unclassified barrel-like repeat fold. Together, our work provides a flexible approach to detecting protein repeats and shows how their systematic annotation can reveal new aspects of protein diversity and evolution.
Open AccessBeyond profiles: supervised repeat annotation using protein embeddings
Protein repeats give rise to diverse protein structures and functions, yet their sequence-based detection is often challenging because individual repeat units can diverge substantially in sequence while retaining similar structures. Most sensitive approaches rely on sequence information directly represented by alignments or derived profiles, thereby limiting flexibility and scalability. Here, we introduce TREAD ( T ransfer learning-based RE peat A nnotation using Protein Embe D dings), a supervised framework that reformulates repeat detection as a residue-level annotation problem and operates directly on embeddings from protein language models. Instead of constructing explicit probabilistic profiles, TREAD learns repeat-specific features implicitly, enabling residue-resolved scoring and flexible repeat segment extraction. Across complementary benchmarks based on RepeatsDB and Pfam, TREAD consistently matches or outperforms the widely used profile-based tool HMMER, particularly in low-data and high-divergence settings. The model exhibits robustness to score thresholding and demonstrates better generalization to independent test sets, including those containing remotely related families. To illustrate the practical utility of TREAD, we applied it to survey β-propeller proteins across the AlphaFold Database and representative proteomes to generate a comprehensive census of this fold. This analysis highlights extensive propeller diversity, identifies lineage-specific expansion patterns across the tree of life, and suggests previously unrecognized relationships between propellers and other repeat folds. Together, TREAD provides a flexible and scalable alternative to profile-based repeat annotation and establishes a general motif-centric framework for protein sequence annotation. Author Summary: Many proteins are assembled from repeated building blocks. These repeats have helped evolution generate a remarkable variety of structures and functions. Yet sensitive detection of individual repeats has long been challenging because their sequences can diverge substantially even when their structures remain similar. Conventional methods often rely on comparing large collections of related sequences to find these patterns. We developed TREAD, a computational method that learns from annotated examples to recognize protein repeats using information captured by protein language models. Rather than building conventional sequence profiles, TREAD identifies repeat units and their boundaries directly from these learned protein representations. In systematic benchmarks, it matched or outperformed HMMER, a widely used profile-based method, particularly when few examples were available or repeat sequences were highly divergent. We then used TREAD to survey β-propellers, proteins assembled from repeated blade-like units, across millions of protein sequences. We uncovered substantial unexplored diversity, differences in their abundance and associated functions across organisms, and unexpected similarities to a previously unclassified barrel-like repeat fold. Together, our work provides a flexible approach to detecting protein repeats and shows how their systematic annotation can reveal new aspects of protein diversity and evolution.
- Open Access
- 7 April 2026
- Published by Wiley in Protein Science
- Vol. 35 (5) , e70541
pLM ‐Repeat: Exploiting the sequence representations of protein language models for sensitive repeat detection
Duplication is an essential mechanism of molecular evolution, which operates across biological scales, from whole genomes to single basepairs. Its study is central to understanding protein evolution, but the detection of duplication events often becomes challenging over evolutionary time, due to the accumulating sequence divergence. The most sensitive sequence‐based protein repeat detection method, HHrepID, relies on the construction of multiple sequence alignments (MSAs) to enhance statistical signals of internal similarity and thus facilitate the detection of ancient duplications. However, such an alignment‐based approach comes at the expense of speed, severely limiting its applicability to large‐scale scans. Recent advances in protein representation learning have introduced sequence embeddings extracted from protein language models (pLMs) as a powerful and faster alternative to MSAs. Such representations have been shown to be effective in detecting distant sequence similarity, as exemplified by the pLM‐BLAST software developed in our group. In this study, we describe pLM‐Repeat, a pipeline built on top of pLM‐BLAST to identify repeat patterns encoded in sequence representations. pLM‐Repeat achieves comparable sensitivity to HHrepID in detecting the presence of repeats, while identifying many more repeat units and providing shorter runtimes, allowing us to detect novel repeat proteins in the AlphaFold Protein Structure Database with the aid of a pre‐filtering model trained on repeat protein representations. pLM‐Repeat is available as an open‐source tool at https://github.com/KYQiu21/plmrepeat .
- 7 April 2026
- Published by Wiley in Protein Science
- Vol. 35 (5) , e70541
Open AccesspLM ‐Repeat: Exploiting the sequence representations of protein language models for sensitive repeat detection
Duplication is an essential mechanism of molecular evolution, which operates across biological scales, from whole genomes to single basepairs. Its study is central to understanding protein evolution, but the detection of duplication events often becomes challenging over evolutionary time, due to the accumulating sequence divergence. The most sensitive sequence‐based protein repeat detection method, HHrepID, relies on the construction of multiple sequence alignments (MSAs) to enhance statistical signals of internal similarity and thus facilitate the detection of ancient duplications. However, such an alignment‐based approach comes at the expense of speed, severely limiting its applicability to large‐scale scans. Recent advances in protein representation learning have introduced sequence embeddings extracted from protein language models (pLMs) as a powerful and faster alternative to MSAs. Such representations have been shown to be effective in detecting distant sequence similarity, as exemplified by the pLM‐BLAST software developed in our group. In this study, we describe pLM‐Repeat, a pipeline built on top of pLM‐BLAST to identify repeat patterns encoded in sequence representations. pLM‐Repeat achieves comparable sensitivity to HHrepID in detecting the presence of repeats, while identifying many more repeat units and providing shorter runtimes, allowing us to detect novel repeat proteins in the AlphaFold Protein Structure Database with the aid of a pre‐filtering model trained on repeat protein representations. pLM‐Repeat is available as an open‐source tool at https://github.com/KYQiu21/plmrepeat .
- Open Access
Conformational diversity in poly-HAMP arrays and its implications for signal transduction
Prokaryotic transmembrane receptors are built around a helical coiled-coil backbone, with specialized sensory, modulatory, and effector domains arranged along its length. The modulatory HAMP domain forms a four-helix parallel coiled coil that is structurally integrated into this backbone, typically connecting transmembrane segments with downstream cytosolic domains. In many systems, HAMP domains have been shown to transduce signals through axial rotation of their helices; however, it is not clear how broadly applicable this mechanism is. Here, we describe two families of soluble chemoreceptors and sensory kinases that contain long arrays of concatenated HAMP domains, which we term poly-HAMP. Although their poly-HAMP arrays have clearly evolved independently, both families share many sequence features consistent with convergence on a similar functional system. We determined the crystal structures of 4-HAMP and 6-HAMP segments from the poly-HAMP array of histidine kinase HskS of Myxococcus xanthus , revealing unusually tight packing between adjacent domains and conformational patterns compatible with the rotational signaling model. To assess whether these features are general and to define the broader conformational landscape of poly-HAMP arrays, we computed AlphaFold2 models of over 200 chemoreceptor- and kinase-associated arrays. The models were consistent with the HskS structures, yet revealed distinct preferences in the two array types: HAMP domains of chemoreceptor arrays were consistently predicted to adopt stable conformations along their lengths, whereas those of kinase arrays were predicted to be biased toward less favorable conformations. By modeling HAMP domains from kinase arrays in isolation from the neighboring domains, we show that they adopt alternative, stable conformations that are related to the array-embedded forms through axial helix rotation. Taken together, our results suggest that, despite their independent origins and structural diversity, HAMP-containing systems ranging from the poly-HAMP arrays studied here through multi-HAMP architectures to canonical single-HAMP receptors may have converged on the same conserved mode of signal transduction that involves axial helix rotation.
Open AccessConformational diversity in poly-HAMP arrays and its implications for signal transduction
Prokaryotic transmembrane receptors are built around a helical coiled-coil backbone, with specialized sensory, modulatory, and effector domains arranged along its length. The modulatory HAMP domain forms a four-helix parallel coiled coil that is structurally integrated into this backbone, typically connecting transmembrane segments with downstream cytosolic domains. In many systems, HAMP domains have been shown to transduce signals through axial rotation of their helices; however, it is not clear how broadly applicable this mechanism is. Here, we describe two families of soluble chemoreceptors and sensory kinases that contain long arrays of concatenated HAMP domains, which we term poly-HAMP. Although their poly-HAMP arrays have clearly evolved independently, both families share many sequence features consistent with convergence on a similar functional system. We determined the crystal structures of 4-HAMP and 6-HAMP segments from the poly-HAMP array of histidine kinase HskS of Myxococcus xanthus , revealing unusually tight packing between adjacent domains and conformational patterns compatible with the rotational signaling model. To assess whether these features are general and to define the broader conformational landscape of poly-HAMP arrays, we computed AlphaFold2 models of over 200 chemoreceptor- and kinase-associated arrays. The models were consistent with the HskS structures, yet revealed distinct preferences in the two array types: HAMP domains of chemoreceptor arrays were consistently predicted to adopt stable conformations along their lengths, whereas those of kinase arrays were predicted to be biased toward less favorable conformations. By modeling HAMP domains from kinase arrays in isolation from the neighboring domains, we show that they adopt alternative, stable conformations that are related to the array-embedded forms through axial helix rotation. Taken together, our results suggest that, despite their independent origins and structural diversity, HAMP-containing systems ranging from the poly-HAMP arrays studied here through multi-HAMP architectures to canonical single-HAMP receptors may have converged on the same conserved mode of signal transduction that involves axial helix rotation.
- Open Access
- 6 February 2026
- Published by Elsevier in Journal of Biological Chemistry
- Vol. 302 (3) , 111267
TET2 in epigenetic control of immune cells: Implications for inflammatory responses and age-related pathologies
- 6 February 2026
- Published by Elsevier in Journal of Biological Chemistry
- Vol. 302 (3) , 111267
Open AccessTET2 in epigenetic control of immune cells: Implications for inflammatory responses and age-related pathologies
- Open Access
pLAST - a tool for rapid comparison and classification of bacterial plasmid sequences
Motivation: The increasing number of fully sequenced bacterial plasmids being annotated and cataloged has prompted the development of computational tools for comparing and classifying them. Existing approaches typically compare full-length DNA sequences (e.g., Mash, BLASTn) or translated open reading frames (ORFs) (e.g., BLASTp, DIAMOND), with plasmid-level scores obtained by aggregating ORF-to-ORF similarities; however, they are either restricted to closely related plasmids or become computationally demanding in large-scale analyses. Results: We describe pLAST (plasmid Language Analysis and Search Tool), a plasmid-search tool built using word2vec representations capturing both ORF-to-ORF similarity and gene neighborhood conservation. Benchmarks indicate that pLAST outperforms both DNA- and ORF-based methods in identifying functionally similar plasmids and, compared to the widely used Mash, it achieves 37%, 30%, and 13% improvements in detecting shared mating-pair formation (MPF) system, relaxase, and oriT types, respectively. This performance scales to datasets comprising thousands of sequences, as exemplified by clustering analyses of ∼56,000 plasmids, which reveal expected functional groups. Beyond global similarity, pLAST also returns per-ORF plasmid-plasmid alignments, enabling detection of shared functional modules. Availability and implementation: pLAST is freely accessible as a web server at https://plast.lbs.cent.uw.edu.pl/ and available as a Python module along with a precomputed database at https://github.com/labstructbioinf/pLAST for customized analysis.
Open AccesspLAST - a tool for rapid comparison and classification of bacterial plasmid sequences
Motivation: The increasing number of fully sequenced bacterial plasmids being annotated and cataloged has prompted the development of computational tools for comparing and classifying them. Existing approaches typically compare full-length DNA sequences (e.g., Mash, BLASTn) or translated open reading frames (ORFs) (e.g., BLASTp, DIAMOND), with plasmid-level scores obtained by aggregating ORF-to-ORF similarities; however, they are either restricted to closely related plasmids or become computationally demanding in large-scale analyses. Results: We describe pLAST (plasmid Language Analysis and Search Tool), a plasmid-search tool built using word2vec representations capturing both ORF-to-ORF similarity and gene neighborhood conservation. Benchmarks indicate that pLAST outperforms both DNA- and ORF-based methods in identifying functionally similar plasmids and, compared to the widely used Mash, it achieves 37%, 30%, and 13% improvements in detecting shared mating-pair formation (MPF) system, relaxase, and oriT types, respectively. This performance scales to datasets comprising thousands of sequences, as exemplified by clustering analyses of ∼56,000 plasmids, which reveal expected functional groups. Beyond global similarity, pLAST also returns per-ORF plasmid-plasmid alignments, enabling detection of shared functional modules. Availability and implementation: pLAST is freely accessible as a web server at https://plast.lbs.cent.uw.edu.pl/ and available as a Python module along with a precomputed database at https://github.com/labstructbioinf/pLAST for customized analysis.
- Open Access
- 17 December 2024
- Published by Wiley in Protein Science
- Vol. 34 (1) , e5244
Applicability of AlphaFold2 in the modeling of dimeric, trimeric, and tetrameric coiled‐coil domains
Coiled coils are a common protein structural motif involved in cellular functions ranging from mediating protein–protein interactions to facilitating processes such as signal transduction or regulation of gene expression. They are formed by two or more alpha helices that wind around a central axis to form a buried hydrophobic core. Various forms of coiled‐coil bundles have been reported, each characterized by the number, orientation, and degree of winding of the constituent helices. This variability is underpinned by short sequence repeats that form coiled coils and whose properties determine both their overall topology and the local geometry of the hydrophobic core. The strikingly repetitive sequence has enabled the development of accurate sequence‐based coiled‐coil prediction methods; however, the modeling of coiled‐coil domains remains a challenging task. In this work, we evaluated the accuracy of AlphaFold2 in modeling coiled‐coil domains, both in modeling local geometry and in predicting global topological properties. Furthermore, we show that the prediction of the oligomeric state of coiled‐coil bundles can be achieved by using the internal representations of AlphaFold2, with a performance better than any previous state‐of‐the‐art method (code available at https://github.com/labstructbioinf/dc2_oligo).
- 17 December 2024
- Published by Wiley in Protein Science
- Vol. 34 (1) , e5244
Open AccessApplicability of AlphaFold2 in the modeling of dimeric, trimeric, and tetrameric coiled‐coil domains
Coiled coils are a common protein structural motif involved in cellular functions ranging from mediating protein–protein interactions to facilitating processes such as signal transduction or regulation of gene expression. They are formed by two or more alpha helices that wind around a central axis to form a buried hydrophobic core. Various forms of coiled‐coil bundles have been reported, each characterized by the number, orientation, and degree of winding of the constituent helices. This variability is underpinned by short sequence repeats that form coiled coils and whose properties determine both their overall topology and the local geometry of the hydrophobic core. The strikingly repetitive sequence has enabled the development of accurate sequence‐based coiled‐coil prediction methods; however, the modeling of coiled‐coil domains remains a challenging task. In this work, we evaluated the accuracy of AlphaFold2 in modeling coiled‐coil domains, both in modeling local geometry and in predicting global topological properties. Furthermore, we show that the prediction of the oligomeric state of coiled‐coil bundles can be achieved by using the internal representations of AlphaFold2, with a performance better than any previous state‐of‐the‐art method (code available at https://github.com/labstructbioinf/dc2_oligo).
- Open Access
Arc/Arg3.1 binds the nuclear polyadenylate-binding protein RRM and regulates neuronal activity-dependent formation of nuclear speckles
Summary: Arc is a neuronal activity-induced protein interaction hub with critical roles in synaptic plasticity and memory. Arc localizes to synapses and the nucleus, but its nuclear functions are little known. We show that Arc accumulates in the interchromatin space of dentate granule cell nuclei and the nucleosol subcellular fraction following seizure activity and in vivo dentate gyrus LTP. Proteomic analysis of affinity-purified Arc complexes identified proteins with functions in post-transcriptional mRNA processing. During LTP, Arc undergoes enhanced complex formation with polyadenylate binding protein nuclear 1 (PABPN1) and paraspeckle splicing factor (PSF) in the nucleosol. In vitro peptide binding arrays show selective binding of Arc to the PABPN1 polyA RNA recognition motif. In hippocampal neuronal cultures, Arc knockdown increases formation of PABPN1 nuclear speckles and blocks chemical-LTP associated increases in small PABPN1 foci. These results implicate Arc in basal and neuronal activity-dependent regulation of PABPN1 speckles involved in mRNA processing and polyadenylation.
Open AccessArc/Arg3.1 binds the nuclear polyadenylate-binding protein RRM and regulates neuronal activity-dependent formation of nuclear speckles
Summary: Arc is a neuronal activity-induced protein interaction hub with critical roles in synaptic plasticity and memory. Arc localizes to synapses and the nucleus, but its nuclear functions are little known. We show that Arc accumulates in the interchromatin space of dentate granule cell nuclei and the nucleosol subcellular fraction following seizure activity and in vivo dentate gyrus LTP. Proteomic analysis of affinity-purified Arc complexes identified proteins with functions in post-transcriptional mRNA processing. During LTP, Arc undergoes enhanced complex formation with polyadenylate binding protein nuclear 1 (PABPN1) and paraspeckle splicing factor (PSF) in the nucleosol. In vitro peptide binding arrays show selective binding of Arc to the PABPN1 polyA RNA recognition motif. In hippocampal neuronal cultures, Arc knockdown increases formation of PABPN1 nuclear speckles and blocks chemical-LTP associated increases in small PABPN1 foci. These results implicate Arc in basal and neuronal activity-dependent regulation of PABPN1 speckles involved in mRNA processing and polyadenylation.
- Open Access
- 11 July 2024
- Published by Wiley in ChemBioChem
- Vol. 25 (15) , e202400202
Expanding the Available RNA Labeling Toolbox With CutA Nucleotidyltransferase for Efficient Transcript Labeling with Purine and Pyrimidine Nucleotide Analogs
RNA labeling is an invaluable tool for investigation of the function and localization of nucleic acids. Labels are commonly incorporated into 3′ end of RNA and the primary enzyme used for this purpose is RNA poly(A) polymerase (PAP), which belongs to the class of terminal nucleotidyltransferases (NTases). However, PAP preferentially adds ATP analogs, thus limiting the number of available substrates. Here, we report the use of another NTase, CutA from the fungus Thielavia terrestris. Using this enzyme, we were able to incorporate into the 3′ end of RNA not only purine analogs, but also pyrimidine analogs. We engaged strain‐promoted azide‐alkyl cycloaddition (SPAAC) to obtain fluorescently labeled or biotinylated transcripts from RNAs extended with azide analogs by CutA. Importantly, modified transcripts retained their biological properties. Furthermore, fluorescently labeled mRNAs were suitable for visualization in cultured mammalian cells. Finally, we demonstrate that either affinity studies or molecular dynamic (MD) simulations allow for rapid screening of NTase substrates, what opens up new avenues in the search for the optimal substrates for this class of enzymes.
- 11 July 2024
- Published by Wiley in ChemBioChem
- Vol. 25 (15) , e202400202
Open AccessExpanding the Available RNA Labeling Toolbox With CutA Nucleotidyltransferase for Efficient Transcript Labeling with Purine and Pyrimidine Nucleotide Analogs
RNA labeling is an invaluable tool for investigation of the function and localization of nucleic acids. Labels are commonly incorporated into 3′ end of RNA and the primary enzyme used for this purpose is RNA poly(A) polymerase (PAP), which belongs to the class of terminal nucleotidyltransferases (NTases). However, PAP preferentially adds ATP analogs, thus limiting the number of available substrates. Here, we report the use of another NTase, CutA from the fungus Thielavia terrestris. Using this enzyme, we were able to incorporate into the 3′ end of RNA not only purine analogs, but also pyrimidine analogs. We engaged strain‐promoted azide‐alkyl cycloaddition (SPAAC) to obtain fluorescently labeled or biotinylated transcripts from RNAs extended with azide analogs by CutA. Importantly, modified transcripts retained their biological properties. Furthermore, fluorescently labeled mRNAs were suitable for visualization in cultured mammalian cells. Finally, we demonstrate that either affinity studies or molecular dynamic (MD) simulations allow for rapid screening of NTase substrates, what opens up new avenues in the search for the optimal substrates for this class of enzymes.