Ho Seon Ahn
Research Subjects
Ho Seon Ahn has a total of 108 co-authors. Here are the top co-authors by number of shared publications:
Somchai Wongwises
Department of Mechanical Engineering, King Mongkut’s University of Technology Thonburi, Bangkok, Thailand
17 shared publicationsJi Hoon Kim
10 shared publicationsGyu Hyeon Shim
9 shared publicationsJi Min Kim
Department of Technology Education, Korea National University of Education, Cheongju 28173, Republic of Korea
8 shared publicationsSun Taek Lim
Department of Mechanical Engineering, Incheon National University, Incheon, Republic of Korea
8 shared publicationsMoo Hwan Kim
7 shared publications
Latest Publications
- 22 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (43) , 29325-29334
A Capsule-Type Reusable Oil Collector for Oil Spill Recovery for Bridging Material Innovation and Practical Design
Oil spills cause severe environmental damage that motivates scientists to explore better and sustainable strategies for cleaner and cheaper remediation techniques. Advances in extreme-wetting materials that selectively absorb oil and yet be water repellent have recently brought about promising results. However, the challenge of practical application persists due to the high costs associated with this technology, the limited oil-absorbing capacity, and the instability of oil retention. An innovative design of capsule-type reusable oil collector (CROC) has been developed to address the current shortcomings of conventional oil collection practices. The CROC can be replaced as a self-contained module and consists of a modified melamine sponge (MMS). The CROC system demonstrated high potential for repeated use (up to 10 times) and achieved an oil collection efficiency of up to 89% during testing in a 1000 L custom-built water pool, with a 0.5 L oil collection per unit when tilted. In our work, we focus on four aspects: (1) MMS integration with the innovative concept of CROC design; (2) theoretical correlation and experimental testing of buoyant force, submergence depth, and tilt angle; (3) performance evaluation with oils of different viscosities in a custom 1000 L water pool; and (4) cyclic reusability of MMS under repeated oil absorption. The combination of MMS with the innovative compact design provides a new route for oil spill cleanup. The technical feasibility of creating a modular CROC unit that can efficiently recover oil is proven through experimental findings, and it also demonstrates its potential for application on an industrial scale. These results indicate that CROC may play an important role in environmental protection by offering a practical, reusable, and scalable solution for oil spill cleanup.
- 22 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (43) , 29325-29334
A Capsule-Type Reusable Oil Collector for Oil Spill Recovery for Bridging Material Innovation and Practical Design
Oil spills cause severe environmental damage that motivates scientists to explore better and sustainable strategies for cleaner and cheaper remediation techniques. Advances in extreme-wetting materials that selectively absorb oil and yet be water repellent have recently brought about promising results. However, the challenge of practical application persists due to the high costs associated with this technology, the limited oil-absorbing capacity, and the instability of oil retention. An innovative design of capsule-type reusable oil collector (CROC) has been developed to address the current shortcomings of conventional oil collection practices. The CROC can be replaced as a self-contained module and consists of a modified melamine sponge (MMS). The CROC system demonstrated high potential for repeated use (up to 10 times) and achieved an oil collection efficiency of up to 89% during testing in a 1000 L custom-built water pool, with a 0.5 L oil collection per unit when tilted. In our work, we focus on four aspects: (1) MMS integration with the innovative concept of CROC design; (2) theoretical correlation and experimental testing of buoyant force, submergence depth, and tilt angle; (3) performance evaluation with oils of different viscosities in a custom 1000 L water pool; and (4) cyclic reusability of MMS under repeated oil absorption. The combination of MMS with the innovative compact design provides a new route for oil spill cleanup. The technical feasibility of creating a modular CROC unit that can efficiently recover oil is proven through experimental findings, and it also demonstrates its potential for application on an industrial scale. These results indicate that CROC may play an important role in environmental protection by offering a practical, reusable, and scalable solution for oil spill cleanup.
- 18 April 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 128, 597-612
Hydrogen production from ammonia: Preliminary design of portable cracking system and related micro-channel reactor
- 18 April 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 128, 597-612
Hydrogen production from ammonia: Preliminary design of portable cracking system and related micro-channel reactor
- 4 June 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (24) , 12641-12648
Spreading and Capillary Imbibition of Viscous Oil Lens into an Open-Cell Porous Structure
Oil pollution in the ocean is becoming more and more of a serious issue, which increases interest in both ways for combating its cause and methods for observing and monitoring how oil spreads. A promising approach based on an optical method with empirical relations for selected viscous oil-water systems is presented. Based on a modified melamine sponge (MMS), the microscopic spreading and oil capillary penetration phenomenon of the porous structure were investigated. The objective of this study is 2-fold: (i) to present a more thorough experimental description of the spreading of viscous oil lens on the water surface and capillary action of oil lens into MMS porous structure; and (ii) to provide a theoretical description that helps to explain some of the observed behavior. With knowledge of delta(2)(infinity ) = - 2S rho(W)/g rho(O)(rho(W) - rho(O)) , we can determine the spreading coefficient S . It needs to be pointed out that the oil lens floating on the water surface does satisfy Neumann's rule as the spreading coefficient of the air-oil-water system is negative (- 9.8 mN/m), indicating the ability to form a stable oil lens with thickness delta(O) = 3.04 mm and radius R-L = 38.64 mm after 60 min of spreading test. Furthermore, to better understand the capillary phenomena from a mechanical approach, an oil lens in contact with the surface of the MMS porous structure, by in-depth visualization, is properly defined as the balance of forces acting. Finally, as an illustration of this method, we utilized this approach to obtain the equilibrium height of the capillary rise and take it into account in terms of effective material thickness.
- 4 June 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (24) , 12641-12648
Spreading and Capillary Imbibition of Viscous Oil Lens into an Open-Cell Porous Structure
Oil pollution in the ocean is becoming more and more of a serious issue, which increases interest in both ways for combating its cause and methods for observing and monitoring how oil spreads. A promising approach based on an optical method with empirical relations for selected viscous oil-water systems is presented. Based on a modified melamine sponge (MMS), the microscopic spreading and oil capillary penetration phenomenon of the porous structure were investigated. The objective of this study is 2-fold: (i) to present a more thorough experimental description of the spreading of viscous oil lens on the water surface and capillary action of oil lens into MMS porous structure; and (ii) to provide a theoretical description that helps to explain some of the observed behavior. With knowledge of delta(2)(infinity ) = - 2S rho(W)/g rho(O)(rho(W) - rho(O)) , we can determine the spreading coefficient S . It needs to be pointed out that the oil lens floating on the water surface does satisfy Neumann's rule as the spreading coefficient of the air-oil-water system is negative (- 9.8 mN/m), indicating the ability to form a stable oil lens with thickness delta(O) = 3.04 mm and radius R-L = 38.64 mm after 60 min of spreading test. Furthermore, to better understand the capillary phenomena from a mechanical approach, an oil lens in contact with the surface of the MMS porous structure, by in-depth visualization, is properly defined as the balance of forces acting. Finally, as an illustration of this method, we utilized this approach to obtain the equilibrium height of the capillary rise and take it into account in terms of effective material thickness.
- Open Access
- 30 May 2024
- Published by Elsevier in Nuclear Engineering and Technology
- Vol. 56 (10) , 4077-4086
Thermal-hydraulic phenomena and heat removal performance of a passive containment cooling system according to exit loss coefficient
- 30 May 2024
- Published by Elsevier in Nuclear Engineering and Technology
- Vol. 56 (10) , 4077-4086
Open AccessThermal-hydraulic phenomena and heat removal performance of a passive containment cooling system according to exit loss coefficient
- 6 December 2023
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 37 (12) , 6513-6521
Effect of screw structure and flared diffuser in a cylindrical venturi-type microbubble generator
- 6 December 2023
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 37 (12) , 6513-6521
Effect of screw structure and flared diffuser in a cylindrical venturi-type microbubble generator
- Open Access
- 17 August 2023
- Published by Wiley in Advanced Materials Interfaces
- Vol. 10 (30)
Tuning Carbon Material Modified Commercial Sponge Toward Pragmatic Oil Spill Cleanup
A practical approach to designing 3D porous materials with new functionalities for oil spill clean‐up attracts widespread attention. The carbonized seaweed‐coated melamine sponge (CMS) can selectively absorb oil immediately due to its countless pores using capillary‐driven force to absorb oil. The microstructure and behaviors of the CMS are thoroughly investigated in relation to the unique porous structure, mechanical stability, wetting response, and in‐depth processing of the high‐speed visualization experiment to determine its promising abilities. For the special CMS structure with a unit cell size of 1 × 1 × 1 cm, the total volume of oil inside the capillary tube is drawn inward after 56 ms, and the absorption rate is estimated to be ≈15 200 liters per spare metre hour without any external power inputs. According to the results, theoretical models are proposed to estimate the oil absorption rate as a function of time by continuity of the oil column in the capillary tube based on quantitative analysis of the optically analyzed oil interface phenomena. It is first shown to be a reliable approach for describing volumetric absorption rate and effective CMS thickness by visualizing the capillary spreading flow. It is expected that this research will hold tremendous potential strategies for environmental remediation.
- 17 August 2023
- Published by Wiley in Advanced Materials Interfaces
- Vol. 10 (30)
Open AccessTuning Carbon Material Modified Commercial Sponge Toward Pragmatic Oil Spill Cleanup
A practical approach to designing 3D porous materials with new functionalities for oil spill clean‐up attracts widespread attention. The carbonized seaweed‐coated melamine sponge (CMS) can selectively absorb oil immediately due to its countless pores using capillary‐driven force to absorb oil. The microstructure and behaviors of the CMS are thoroughly investigated in relation to the unique porous structure, mechanical stability, wetting response, and in‐depth processing of the high‐speed visualization experiment to determine its promising abilities. For the special CMS structure with a unit cell size of 1 × 1 × 1 cm, the total volume of oil inside the capillary tube is drawn inward after 56 ms, and the absorption rate is estimated to be ≈15 200 liters per spare metre hour without any external power inputs. According to the results, theoretical models are proposed to estimate the oil absorption rate as a function of time by continuity of the oil column in the capillary tube based on quantitative analysis of the optically analyzed oil interface phenomena. It is first shown to be a reliable approach for describing volumetric absorption rate and effective CMS thickness by visualizing the capillary spreading flow. It is expected that this research will hold tremendous potential strategies for environmental remediation.
- Open Access
- 1 June 2023
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 148 (13) , 6223-6242
A hyper-optimisation method based on a physics-informed machine learning and point clouds for a flat plate solar collector
This paper presents a new way to hyper-optimise a flat plate solar collector using a combination of regenerated point clouds, constructal theory, and physics-informed machine learning (PIML). The behaviour of the flat plate solar collector is studied as solar radiation and ambient temperature change, using both precise numerical simulation and PIML. The novel hyper-optimisation method integrates these two approaches to improve the performance of the solar collector. In this method, the volume of fluid and solid structure of the flat plate solar collector (FPSC) is transformed into point clouds based on constructal theory. The point clouds are then regenerated into a continuous and uniform 3D geometry using optimised parameters. To put the modified version of the flat plate solar collector (FPSC) into practice, a computational method is used to generate a training data set for machine learning, specifically for neural networks. After thoroughly verifying the computational results, the PIM is trained using the generated training data set. This study marked the first time that a regular computational method is replaced with PIML output to reduce the computational cost of prediction. In the second layer of calculation, a deep neural network is used to make predictions based on the outputs generated by PIML. Seven independent parameters are used to predict heat transfer and efficiency over time, including time, heat flux, mass flow rate, inlet temperature, number of pairs and clusters, and volume fraction of nanofluid, while 16 hidden layers and 63 learnable neurons are engaged in this prediction layer. The geometry matrix is redefined by constructal theory principles in a series of iteration loops to generate the first flat plate solar collector based on constructal theory (CTFPSC). The results indicated that the hyper-optimisation method could reduce calculation costs by 18.31% compared with the regular computational method. In addition, the results reveal that maximum outlet temperatures are possible when Nc > 3 and Np> 5.
- 1 June 2023
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 148 (13) , 6223-6242
Open AccessA hyper-optimisation method based on a physics-informed machine learning and point clouds for a flat plate solar collector
This paper presents a new way to hyper-optimise a flat plate solar collector using a combination of regenerated point clouds, constructal theory, and physics-informed machine learning (PIML). The behaviour of the flat plate solar collector is studied as solar radiation and ambient temperature change, using both precise numerical simulation and PIML. The novel hyper-optimisation method integrates these two approaches to improve the performance of the solar collector. In this method, the volume of fluid and solid structure of the flat plate solar collector (FPSC) is transformed into point clouds based on constructal theory. The point clouds are then regenerated into a continuous and uniform 3D geometry using optimised parameters. To put the modified version of the flat plate solar collector (FPSC) into practice, a computational method is used to generate a training data set for machine learning, specifically for neural networks. After thoroughly verifying the computational results, the PIM is trained using the generated training data set. This study marked the first time that a regular computational method is replaced with PIML output to reduce the computational cost of prediction. In the second layer of calculation, a deep neural network is used to make predictions based on the outputs generated by PIML. Seven independent parameters are used to predict heat transfer and efficiency over time, including time, heat flux, mass flow rate, inlet temperature, number of pairs and clusters, and volume fraction of nanofluid, while 16 hidden layers and 63 learnable neurons are engaged in this prediction layer. The geometry matrix is redefined by constructal theory principles in a series of iteration loops to generate the first flat plate solar collector based on constructal theory (CTFPSC). The results indicated that the hyper-optimisation method could reduce calculation costs by 18.31% compared with the regular computational method. In addition, the results reveal that maximum outlet temperatures are possible when Nc > 3 and Np> 5.
- 10 September 2022
- Published by Springer Nature in Environmental Chemistry Letters
- Vol. 21 (1) , 285-318
Interfacial solar steam generation by wood-based devices to produce drinking water: a review
- 10 September 2022
- Published by Springer Nature in Environmental Chemistry Letters
- Vol. 21 (1) , 285-318
Interfacial solar steam generation by wood-based devices to produce drinking water: a review