ADAlejandro Datas

Alejandro Datas

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alejandro Datas has a total of 244 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Germanium thermophotovoltaic devices achieving 7.3 % efficiency under high-temperature emission by empirical calorimetry

    by A.M. Medrano, E. López, P. García-Linares, J. Villa, M. Gamel, M. Garín, I. Martín, C. Cañizo, A. Datas


  • Open Access

    The 2026 thermionic converters roadmap

    by Alessandro Bellucci, Daniele M Trucchi, Gideon Segev, Ryan Jacobs, Dane Morgan, John Booske, Muhammad M Hasan, Ramiz Zulkharnay, Neil A Fox, Paul W May, et al.

    Thermionic technologies are based on electron emission from a material occurring at high temperatures, following the physical mechanism discovered by Richardson at the beginning of the 20th century. Although thermionic emitters were successfully used to produce commercial electronic devices, sensors, and electron sources, the large potential of this technology for the development of energetically active devices for space and terrestrial applications is still unexploited, since several challenges remain unresolved to enable practical implementation of competitive energy converters. This roadmap aims to collect the main efforts of the research and industrial community focused on thermionic technologies, covering aspects related to active materials, components and system engineering for the development of related devices. Additionally, contributions related to the progress of promising approaches for the prediction and design of the systems, as well as hybridization with other technologies or physical mechanisms, are also considered. The scope is to provide a guide for researchers and developers who are experienced on this topic—but also who are starting to work with it—by analytically describing state-of-the-art, technological challenges and future paths for a full development of thermionic technologies.


  • Open Access

    Optimization of Bypass Diodes and Cell Interconnections in 1 kW-Class Thermophotovoltaic Modules Under Highly Non-Uniform Irradiance Conditions

    by Ignacio Izquierdo, Pablo García-Linares Fontes, Juan Villa Morales, A.M. Medrano, Alejandro Datas

    Thermophotovoltaic (TPV) systems have recently achieved cell efficiencies exceeding 40%, highlighting their potential for high-performance thermal-to-electric energy conversion. However, scaling these devices to module level remains a major challenge, particularly under the strongly non-uniform irradiance and temperature distribution inherent to some practical TPV configurations. These non-uniformities induce electrical mismatch between cells, leading to significant performance losses that are not yet fully understood in large-area systems. In this work, we investigate mismatch mechanisms and mitigation strategies in a 1 kW-class TPV module comprising 2,400 germanium cells arranged in a cylindrical architecture. The cells are grouped into 10-cell mini-modules, for which two interconnection schemes are analyzed: fully series-connected cells, and a parallel configuration consisting of two series-connected groups of five parallel-connected cells. The study combines experimental characterization and modeling. Individual TPV cells are characterized through temperature- and irradiance-dependent I–V measurements, enabling the extraction of parameters for a temperature-dependent single-diode equivalent circuit model. These experimentally calibrated models are integrated into a spatially resolved electrothermal simulation framework implemented in NGSpice, accounting for non-uniform irradiance, temperature-dependent behavior, and electrical interconnection effects. The results show that fully series-connected mini-modules outperform parallel configurations due to their reduced sensitivity to voltage losses. Bypass diodes significantly mitigate mismatch effects, with low-forward-voltage devices such as Ge diodes outperforming Si ones. An optimal number of bypass diodes is identified, balancing mismatch protection and voltage losses. These findings provide design guidelines for efficient large-scale TPV modules under realistic operating conditions.

  • Open Access

    Germanium Thermophotovoltaic Devices Achieving 7.3% Efficiency Under High-Temperature Emission by Empirical Calorimetry

    by A.M. Medrano, Esther López, Pablo García-Linares Fontes, Juan Villa Morales, M. Gamel, Moisés Garín, Isidro Martín, Carlos del Cañizo, Alejandro Datas

    We report the first fully empirical efficiency measurement of germanium-based thermophotovoltaic devices under high-temperature, high-irradiance conditions using a high view-factor calorimetric setup. Two architectures were fabricated on p-type, highly doped (1017 cm−3) Ge substrates, differing only in rear contact design. A baseline device with a full-area gold rear mirror achieves a peak efficiency of 7.3% and a power density of 1.77 W/cm2 at 1480 °C, while a PERC-type device reaches 6.3% and 1.22 W/cm2 at 1426 °C. The superior high-temperature performance of the baseline cell is attributed to lower series resistance, whereas the PERC architecture shows slightly higher efficiency at lower emitter temperatures due to improved rear reflectivity. A validated model identifies out-of-band free-carrier absorption losses in highly doped Ge, as the main efficiency-limiting mechanism. Under an idealized AlN/W spectrally selective emitter, efficiencies up to 22.3% at 1800 °C are predicted, consistent with prior projections. When previously reported Ge devices are evaluated under a realistic graphite emitter spectrum, efficiencies decrease to ~8% at 1480 °C. These results show that earlier projections remain valid but idealized, underscoring the importance of spectral control. Finally, we present the first direct comparison of Ge and InGaAs thermophotovoltaic devices under identical characterization conditions.

  • Open Access

    Assessing Waste Heat Utilization in Power-to-Heat-to-Power Storage Systems for Cost-Effective Building Electrification

    by Alicia López-Ceballos, Alejandro Datas

    Fully electrifying the building sector requires not only the widespread adoption of photovoltaic (PV) self-consumption and heat pumps, but also the integration of cost-effective energy-storage solutions. Hybridizing lithium-ion ( Li -ion) batteries with power to heat to power storage (PHPS) systems—thermal batteries capable of thermal-to-electric energy conversion—offer a promising and economically viable solution. PHPS systems dispatch combined heat and power by utilizing the low-temperature waste heat generated during the thermal-to-electric energy-conversion process. This study investigates the technoeconomic impacts of waste heat use in PHPS systems integrated with Li -ion batteries and heat pumps to support the decarbonization of the building sector. Two distinct strategies are evaluated: (1) direct use of waste heat to meet heating demands; and (2) the use of waste heat to enhance the heat pump’s coefficient of performance. Results show that supplying the waste heat at the demand setpoint temperature is the best solution to integrate PHPS cost effectively, although enhancing the heat pump’s COP with waste heat also yields notable economic gains. Additionally, leveraging waste heat significantly lowers the minimum thermal-to-electric conversion efficiency required for PHPS systems to achieve economic viability. Optimal PHPS designs enable large-scale energy storage and charging capacities, thereby enhancing PV self-consumption rates and reducing the levelized cost of energy. The analysis also reveals that hybridizing PHPS with Li -ion batteries may rise as the optimal solution for moderately priced PHPS systems, with the reduction in levelized cost being more pronounced in solar-dominated regions.


  • Open Access

    Evaluating Power-to-Heat-to-Power Storage Potential in Wind- and Solar-Dominated Energy Markets

    by Alicia López-Ceballos, Alejandro Datas, Ignacio Antón, Carlos del Cañizo, Marta Victoria

    This study assesses the role of Power-to-Heat-to-Power Storage (PHPS) systems, also known as Carnot batteries, in the national energy system of a wind-dominated (Denmark) and a solar-dominated (Spain) region. Using the open-source PyPSA framework, we model sector-coupled electricity and heating systems, and evaluate individual (decentralized) and district (centralized) configurations for heat provision at residential level, with and without PHPS waste heat recovery. The results show that PHPS contribution is most pronounced in wind-dominated systems with decentralized heating, where PHPS emerges as the dominant storage option. PHPS also plays a significant role in other configurations, including wind-dominated regions with centralized heating and solar-dominated regions with decentralized heating. Across all scenarios, waste heat recovery proves essential to enhancing PHPS competitiveness, in some cases enabling it to partially displace lithium-ion batteries. Sensitivity analysis highlights that PHPS viability depends primarily on achieving low energy capacity costs (less than approximately 10 €/kWh) and maintaining reasonable heat-to-power conversion efficiencies. Overall, while PHPS complements existing storage technologies by providing dispatchable electricity and heat, its potential adoption is highly context-dependent, influenced by climate, heating system configuration, and competing storage costs.

  • Open Access

    Germanium Thermophotovoltaic Devices Achieving 7.3% Efficiency Under High-Temperature Emission by Empirical Calorimetry

    by A. M. Medrano, E. Lopez, Pablo Garcia-Linares, J. Villa, M. Gamel, M. Garin, I. Martin, C. Canizo, A. Datas

    We report the first empirical efficiency measurement of germanium-based thermophotovoltaic devices under high-temperature, high-irradiance conditions using a high view-factor calorimetric setup. Two TPV cell architectures were fabricated on p-type, highly doped (10^17 cm-3) Ge substrates, differing only in rear contact configuration. A standard device with a gold rear contact achieves a peak efficiency of 7.3 % and a power density of 1.77 W/cm2 at an emitter temperature of 1480 C, while a PERC-type device reaches 6.3 % efficiency and 1.22 W/cm2 at 1426 C. The superior performance of the standard device is attributed to lower series resistance, whereas the PERC design exhibits slightly higher efficiency at lower emitter temperatures (4.0 % vs. 3.8 % at 1150 C) due to enhanced rear-surface reflectivity. A detailed TPV model has been developed and validated across both device architectures. The model identifies out-of-band optical losses as the dominant efficiency-limiting mechanism, primarily caused by strong free-carrier absorption in the highly doped Ge substrate. Using this model, we predict device performance under idealized spectral conditions commonly assumed in prior literature. For a simulated AlN/W spectrally selective emitter, efficiencies as high as 22.3 % at 1800 C are obtained, consistent with previous semi-empirical predictions. In contrast, when previously reported Ge devices are modeled under the realistic graphite emitter spectrum used here, projected efficiencies decrease to as low as 8.1 % at 1480 C. These results show that earlier projections remain valid but idealized and underscore the importance of emitter spectral engineering and substrate optimization. Finally, we present the first direct comparison of Ge and InGaAs TPV devices under identical conditions, demonstrating the superior performance of InGaAs while confirming the cost-driven competitiveness of Ge.

  • Open Access

    Evaluating Power-to-Heat-to-Power Storage Potential in Wind- and Solar-Dominated Energy Markets

    by Alicia López-Ceballos, Alejandro Datas, Ignacio Antón, Carlos Cañizo, Marta Victoria

    This study assesses the role of Power-to-Heat-to-Power Storage (PHPS) systems, also known as Carnot batteries, in the national energy system of a wind-dominated (Denmark) and a solar-dominated (Spain) region. Using the open-source PyPSA framework, we model sector-coupled electricity and heating systems, and evaluate individual and district heating configurations for heat provision at residential level, with and without PHPS waste heat recovery. Our results show that PHPS is most viable in individual heating systems, and in wind-dominated locations, where its low cost per energy capacity enables it to balance long-duration fluctuations. Moreover, waste heat recovery is essential to enhance PHPS competitiveness, allowing it to displace lithium-ion batteries. Conversely, PHPS is largely outcompeted in district heating systems, which favour low-cost centralized energy storage. Sensitivity analysis highlights that PHPS viability depends primarily on achieving low energy capacity costs and maintaining reasonable heat-to-power conversion efficiencies. Overall, while PHPS complements existing storage technologies by providing dispatchable electricity and heat, its potential adoption is highly context-dependent, influenced by climate, heating system configuration, and competing storage costs.

  • Open Access

    A dispatchable latent heat solar thermophotovoltaic battery

    by Myrto Zeneli, Aurelio González-Pardo, Thorsten Denk, Alejandro Datas