Qing-Yuan Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qing-Yuan Yang has a total of 285 co-authors. Here are the top co-authors by number of shared publications:
- Michael J. Zaworotko
Department of Chemical Sciences, Bernal Institute, University of Limerick, V94 T9PX, Republic of Ireland
22 shared publications Li-Ping Zhang
15 shared publicationsShuang Ni
State Key Laboratory of Fluorine & Nitrogen Chemicals, School of Chemical Engineering and Technology
15 shared publicationsLi Xu
Xi’an Jiaotong University
14 shared publicationsSu-Tao Zheng
14 shared publications- Cheng-Yong Su
Sun Yat-sen University
12 shared publications
Latest Publications
- 30 October 2026
- Published by American Chemical Society (ACS) in ACS Materials Letters
Selective Capture of Trifluoromethane from Nitrogen Using a Scalable Ultramicroporous Nickel-Based Metal–Organic Framework
Trifluoromethane (CHF3) is a potent greenhouse gas and a useful industrial feedstock, and its selective capture from N2-rich streams is relevant to both emission control and resource recovery. Here, we investigate the ultramicroporous nickel-based metal–organic framework Ni-ina for CHF3/N2 separation (ina = isonicotinic acid). Ni-ina, synthesized by a scalable modified hydrothermal method, has a pore size of about 0.6 nm, well matched to the kinetic diameter of CHF3 (0.46 nm). It exhibits a CHF3 uptake of 3.58 mmol g–1 at 298 K and 10 kPa, with much lower N2 uptake. The value is, to our knowledge, the highest reported for MOF under identical conditions. The ideal adsorbed solution theory (IAST)-predicted selectivity for a CHF3/N2 mixture (10:90, v/v) is 127 at 298 K and 100 kPa. Grand canonical Monte Carlo (GCMC) simulations and breakthrough experiments confirm preferential CHF3 adsorption and regenerable separation performance. These results identify Ni-ina as a promising adsorbent for CHF3 capture from N2-rich streams.
- 30 October 2026
- Published by American Chemical Society (ACS) in ACS Materials Letters
Selective Capture of Trifluoromethane from Nitrogen Using a Scalable Ultramicroporous Nickel-Based Metal–Organic Framework
Trifluoromethane (CHF3) is a potent greenhouse gas and a useful industrial feedstock, and its selective capture from N2-rich streams is relevant to both emission control and resource recovery. Here, we investigate the ultramicroporous nickel-based metal–organic framework Ni-ina for CHF3/N2 separation (ina = isonicotinic acid). Ni-ina, synthesized by a scalable modified hydrothermal method, has a pore size of about 0.6 nm, well matched to the kinetic diameter of CHF3 (0.46 nm). It exhibits a CHF3 uptake of 3.58 mmol g–1 at 298 K and 10 kPa, with much lower N2 uptake. The value is, to our knowledge, the highest reported for MOF under identical conditions. The ideal adsorbed solution theory (IAST)-predicted selectivity for a CHF3/N2 mixture (10:90, v/v) is 127 at 298 K and 100 kPa. Grand canonical Monte Carlo (GCMC) simulations and breakthrough experiments confirm preferential CHF3 adsorption and regenerable separation performance. These results identify Ni-ina as a promising adsorbent for CHF3 capture from N2-rich streams.
- 23 September 2026
- Published by Elsevier in Chemical Engineering Journal
- Vol. 549
Interfacial electron modulation of TiO2 by conductive NiCu-bimetallic metal-organic framework for photocatalytic hydrogen evolution
- 23 September 2026
- Published by Elsevier in Chemical Engineering Journal
- Vol. 549
Interfacial electron modulation of TiO2 by conductive NiCu-bimetallic metal-organic framework for photocatalytic hydrogen evolution
- 27 August 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (35) , 25673-25680
Pore-Chemistry Modulation via Ligand Functionalization in Cu−Pyrimidinecarboxylate Coordination Networks Enables High-Selectivity Recovery of n -Butane from Isobutane
The close similarity in molecular dimensions and physicochemical properties between n-butane (n-C4H10) and isobutane (iso-C4H10) makes their separation a persistent industrial challenge. In this work, we employ two copper-based coordination networks, Cu-APC and Cu-MPC, constructed from amino- and methyl-functionalized pyrimidine-5-carboxylate ligands, respectively, for n-C4H10/iso-C4H10 separation. The two frameworks exhibit distinct interlayer channel apertures (5.2 Å for Cu-APC and 4.1 Å for Cu-MPC), enabling a systematic comparison of pore-chemistry effects on C4 isomer discrimination. Cu-APC exhibits a remarkable n-C4H10 uptake of 33.6 cm3·g−1 under the conditions of 298 K and 100 kPa, together with an adsorption ratio of 4.36 for an equimolar n-C4H10/iso-C4H10 mixture. DFT calculations were performed to investigate the host−guest interactions. The results indicate that n-C4H10 is preferentially stabilized within the 2D framework via synergistic C−H···π and C−H···N contacts, with measured distances of 3.42 Å and 3.15−3.68 Å, respectively. Cyclic fixed-bed breakthrough experiments further confirm the excellent stability and regenerability of Cu-APC, positioning it as a viable candidate for the energy-saving separation of n-C4H10 from C4 alkane isomers.
- 27 August 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (35) , 25673-25680
Pore-Chemistry Modulation via Ligand Functionalization in Cu−Pyrimidinecarboxylate Coordination Networks Enables High-Selectivity Recovery of n -Butane from Isobutane
The close similarity in molecular dimensions and physicochemical properties between n-butane (n-C4H10) and isobutane (iso-C4H10) makes their separation a persistent industrial challenge. In this work, we employ two copper-based coordination networks, Cu-APC and Cu-MPC, constructed from amino- and methyl-functionalized pyrimidine-5-carboxylate ligands, respectively, for n-C4H10/iso-C4H10 separation. The two frameworks exhibit distinct interlayer channel apertures (5.2 Å for Cu-APC and 4.1 Å for Cu-MPC), enabling a systematic comparison of pore-chemistry effects on C4 isomer discrimination. Cu-APC exhibits a remarkable n-C4H10 uptake of 33.6 cm3·g−1 under the conditions of 298 K and 100 kPa, together with an adsorption ratio of 4.36 for an equimolar n-C4H10/iso-C4H10 mixture. DFT calculations were performed to investigate the host−guest interactions. The results indicate that n-C4H10 is preferentially stabilized within the 2D framework via synergistic C−H···π and C−H···N contacts, with measured distances of 3.42 Å and 3.15−3.68 Å, respectively. Cyclic fixed-bed breakthrough experiments further confirm the excellent stability and regenerability of Cu-APC, positioning it as a viable candidate for the energy-saving separation of n-C4H10 from C4 alkane isomers.
- 25 August 2026
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 55 (33) , 12200-12212
Ligand-defective Ni-MOF-74/g-C 3 N 4 heterojunction via in situ growth for boosted photocatalytic CO 2 reduction
Solar-driven photocatalytic reduction of CO 2 into value-added fuels offers a promising route to address greenhouse gas emissions and energy shortages.
- 25 August 2026
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 55 (33) , 12200-12212
Ligand-defective Ni-MOF-74/g-C 3 N 4 heterojunction via in situ growth for boosted photocatalytic CO 2 reduction
Solar-driven photocatalytic reduction of CO 2 into value-added fuels offers a promising route to address greenhouse gas emissions and energy shortages.
- 3 August 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (32) , 19038-19044
Selective Adsorption of CHF3 over N2 in a Scalable Aluminum Fumarate Metal–Organic Framework
The selective separation of CHF3 from N2 is of practical importance for both greenhouse gas mitigation and resource recovery. In this work, a metal–organic framework that is based on aluminum, Al-Fum, was investigated as an adsorbent for CHF3/N2 separation. The synthesis of Al-Fum was accomplished via a simple approach. Moreover, a single batch can readily achieve the hundred-gram scale in a green manner. The material is characterized by a microporous structure, featuring a pore aperture of roughly 5.6 × 6.0 Å, which is favorable for thermodynamically selective adsorption. The adsorption uptake for CHF3 reaches 73.56 cm3 g–1 at 298 K and 100 kPa, whereas the uptake of N2 is only 5.97 cm3 g–1. The calculated isosteric heat of adsorption for CHF3 is 27.04 kJ mol–1, higher than that for N2, indicating stronger host–guest interactions. The CHF3/N2 selectivity calculated by IAST is 50.1. Dispersion-corrected density functional theory calculations further reveal that CHF3 interacts with the framework through multiple C–F···H and C–H···O contacts. Dynamic breakthrough testing verifies the remarkable separation efficiency of Al-Fum, making it a promising adsorbent for separating CHF3 from N2 mixtures.
- 3 August 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (32) , 19038-19044
Selective Adsorption of CHF3 over N2 in a Scalable Aluminum Fumarate Metal–Organic Framework
The selective separation of CHF3 from N2 is of practical importance for both greenhouse gas mitigation and resource recovery. In this work, a metal–organic framework that is based on aluminum, Al-Fum, was investigated as an adsorbent for CHF3/N2 separation. The synthesis of Al-Fum was accomplished via a simple approach. Moreover, a single batch can readily achieve the hundred-gram scale in a green manner. The material is characterized by a microporous structure, featuring a pore aperture of roughly 5.6 × 6.0 Å, which is favorable for thermodynamically selective adsorption. The adsorption uptake for CHF3 reaches 73.56 cm3 g–1 at 298 K and 100 kPa, whereas the uptake of N2 is only 5.97 cm3 g–1. The calculated isosteric heat of adsorption for CHF3 is 27.04 kJ mol–1, higher than that for N2, indicating stronger host–guest interactions. The CHF3/N2 selectivity calculated by IAST is 50.1. Dispersion-corrected density functional theory calculations further reveal that CHF3 interacts with the framework through multiple C–F···H and C–H···O contacts. Dynamic breakthrough testing verifies the remarkable separation efficiency of Al-Fum, making it a promising adsorbent for separating CHF3 from N2 mixtures.
- 22 June 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (35)
Synergistic Pore Microenvironment Engineering in Zinc Metal–Organic Frameworks for High SF 6 /N 2 Selectivity and Humidity‐Resistant Trace SF 6 Capture
Sulfur hexafluoride (SF 6 ) is a potent greenhouse gas widely used in electrical insulation. Although the size difference between SF 6 and N 2 enables separation in principle, achieving high SF 6 selectivity at trace concentrations, large adsorption capacity, and long‐term stability remains a formidable challenge. Herein, we report a family of new zinc‐based metal‐organic frameworks ( Zn‐tcpb , Zn‐tcpb‐bim , Zn‐tppb‐bim ) with systematically tunable pore sizes and electrostatic microenvironments. By integrating a mixed‐ligand strategy (tetracarboxylic acids plus 2,2'‐biimidazole) with pore functionalization, we achieve synergistic control over adsorption and separation properties. Among them, Zn‐tppb‐bim— featuring electron‐withdrawing pyrazine rings—exhibits a remarkable low‐pressure SF 6 uptake of 3.06 mmol/g at 0.1 bar, and an excellent SF 6 /N 2 IAST selectivity of 606 (1:9, 1 bar), achieving a balance between uptake and selectivity. Theoretical calculations reveal that the N‐heterocyclic units in Zn‐tppb‐bim generate a stronger positive framework charge, enhancing C─H···F interactions with SF 6 . Dynamic breakthrough experiments confirm complete separation of SF 6 /N 2 mixtures. Remarkably, the materials retain full separation performance even at 80% relative humidity. This work demonstrates a viable and generalizable design strategy that synergistically optimizes adsorption capacity, selectivity, and humidity resistance, providing a rare example of metal–organic framework that are both highly efficient and stable under practical conditions.
- 22 June 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (35)
Synergistic Pore Microenvironment Engineering in Zinc Metal–Organic Frameworks for High SF 6 /N 2 Selectivity and Humidity‐Resistant Trace SF 6 Capture
Sulfur hexafluoride (SF 6 ) is a potent greenhouse gas widely used in electrical insulation. Although the size difference between SF 6 and N 2 enables separation in principle, achieving high SF 6 selectivity at trace concentrations, large adsorption capacity, and long‐term stability remains a formidable challenge. Herein, we report a family of new zinc‐based metal‐organic frameworks ( Zn‐tcpb , Zn‐tcpb‐bim , Zn‐tppb‐bim ) with systematically tunable pore sizes and electrostatic microenvironments. By integrating a mixed‐ligand strategy (tetracarboxylic acids plus 2,2'‐biimidazole) with pore functionalization, we achieve synergistic control over adsorption and separation properties. Among them, Zn‐tppb‐bim— featuring electron‐withdrawing pyrazine rings—exhibits a remarkable low‐pressure SF 6 uptake of 3.06 mmol/g at 0.1 bar, and an excellent SF 6 /N 2 IAST selectivity of 606 (1:9, 1 bar), achieving a balance between uptake and selectivity. Theoretical calculations reveal that the N‐heterocyclic units in Zn‐tppb‐bim generate a stronger positive framework charge, enhancing C─H···F interactions with SF 6 . Dynamic breakthrough experiments confirm complete separation of SF 6 /N 2 mixtures. Remarkably, the materials retain full separation performance even at 80% relative humidity. This work demonstrates a viable and generalizable design strategy that synergistically optimizes adsorption capacity, selectivity, and humidity resistance, providing a rare example of metal–organic framework that are both highly efficient and stable under practical conditions.
- 22 June 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (35) , e4456858
Synergistic Pore Microenvironment Engineering in Zinc Metal–Organic Frameworks for High SF 6 /N 2 Selectivity and Humidity‐Resistant Trace SF 6 Capture
Sulfur hexafluoride (SF 6 ) is a potent greenhouse gas widely used in electrical insulation. Although the size difference between SF 6 and N 2 enables separation in principle, achieving high SF 6 selectivity at trace concentrations, large adsorption capacity, and long‐term stability remains a formidable challenge. Herein, we report a family of new zinc‐based metal‐organic frameworks ( Zn‐tcpb , Zn‐tcpb‐bim , Zn‐tppb‐bim ) with systematically tunable pore sizes and electrostatic microenvironments. By integrating a mixed‐ligand strategy (tetracarboxylic acids plus 2,2'‐biimidazole) with pore functionalization, we achieve synergistic control over adsorption and separation properties. Among them, Zn‐tppb‐bim— featuring electron‐withdrawing pyrazine rings—exhibits a remarkable low‐pressure SF 6 uptake of 3.06 mmol/g at 0.1 bar, and an excellent SF 6 /N 2 IAST selectivity of 606 (1:9, 1 bar), achieving a balance between uptake and selectivity. Theoretical calculations reveal that the N‐heterocyclic units in Zn‐tppb‐bim generate a stronger positive framework charge, enhancing C─H···F interactions with SF 6 . Dynamic breakthrough experiments confirm complete separation of SF 6 /N 2 mixtures. Remarkably, the materials retain full separation performance even at 80% relative humidity. This work demonstrates a viable and generalizable design strategy that synergistically optimizes adsorption capacity, selectivity, and humidity resistance, providing a rare example of metal–organic framework that are both highly efficient and stable under practical conditions.
- 22 June 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (35) , e4456858
Synergistic Pore Microenvironment Engineering in Zinc Metal–Organic Frameworks for High SF 6 /N 2 Selectivity and Humidity‐Resistant Trace SF 6 Capture
Sulfur hexafluoride (SF 6 ) is a potent greenhouse gas widely used in electrical insulation. Although the size difference between SF 6 and N 2 enables separation in principle, achieving high SF 6 selectivity at trace concentrations, large adsorption capacity, and long‐term stability remains a formidable challenge. Herein, we report a family of new zinc‐based metal‐organic frameworks ( Zn‐tcpb , Zn‐tcpb‐bim , Zn‐tppb‐bim ) with systematically tunable pore sizes and electrostatic microenvironments. By integrating a mixed‐ligand strategy (tetracarboxylic acids plus 2,2'‐biimidazole) with pore functionalization, we achieve synergistic control over adsorption and separation properties. Among them, Zn‐tppb‐bim— featuring electron‐withdrawing pyrazine rings—exhibits a remarkable low‐pressure SF 6 uptake of 3.06 mmol/g at 0.1 bar, and an excellent SF 6 /N 2 IAST selectivity of 606 (1:9, 1 bar), achieving a balance between uptake and selectivity. Theoretical calculations reveal that the N‐heterocyclic units in Zn‐tppb‐bim generate a stronger positive framework charge, enhancing C─H···F interactions with SF 6 . Dynamic breakthrough experiments confirm complete separation of SF 6 /N 2 mixtures. Remarkably, the materials retain full separation performance even at 80% relative humidity. This work demonstrates a viable and generalizable design strategy that synergistically optimizes adsorption capacity, selectivity, and humidity resistance, providing a rare example of metal–organic framework that are both highly efficient and stable under practical conditions.
- Open Access
- 31 May 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (52) , e76187
Cooperative Nitrogen Sites and Aromatic Pockets in a Dual‐Ligand MOF Enable Bifunctional Methane Purification
Methane purification from coal‐bed methane and natural gas presents a persistent challenge in energy applications, yet materials capable of addressing both separations remain scarce. Here we report a rational ligand design strategy employing multi‐nitrogen sites and aromatic moieties to construct Zn‐ad‐ina , a metal–organic framework that combines exceptionally high CH 4 /N 2 selectivity with remarkable hydrocarbon/CH 4 discrimination. The material exhibits a substantial C 3 H 8 uptake of 74.3 cm 3 g −1 at 298 K and 1 bar, coupled with IAST selectivities reaching 936.3, 38.6, and 8.7 for C 3 H 8 /CH 4 , C 2 H 6 /CH 4 , and CH 4 /N 2 , respectively. GCMC simulations reveal a synergistic adsorption mechanism wherein nitrogen sites preferentially capture CH 4 over N 2 , while aromatic rings provide strong binding pockets for C 3 H 8 and C 2 H 6 . Hirshfeld surface analysis quantifies the framework‐adsorbate interaction landscape, and fixed‐bed breakthrough measurements demonstrate efficient recovery of high‐purity methane from both binary and ternary feed mixtures. This work establishes ligand‐directed functional site integration as a viable approach for engineering multifunctional adsorbents within unified framework architectures.
- 31 May 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (52) , e76187
Open AccessCooperative Nitrogen Sites and Aromatic Pockets in a Dual‐Ligand MOF Enable Bifunctional Methane Purification
Methane purification from coal‐bed methane and natural gas presents a persistent challenge in energy applications, yet materials capable of addressing both separations remain scarce. Here we report a rational ligand design strategy employing multi‐nitrogen sites and aromatic moieties to construct Zn‐ad‐ina , a metal–organic framework that combines exceptionally high CH 4 /N 2 selectivity with remarkable hydrocarbon/CH 4 discrimination. The material exhibits a substantial C 3 H 8 uptake of 74.3 cm 3 g −1 at 298 K and 1 bar, coupled with IAST selectivities reaching 936.3, 38.6, and 8.7 for C 3 H 8 /CH 4 , C 2 H 6 /CH 4 , and CH 4 /N 2 , respectively. GCMC simulations reveal a synergistic adsorption mechanism wherein nitrogen sites preferentially capture CH 4 over N 2 , while aromatic rings provide strong binding pockets for C 3 H 8 and C 2 H 6 . Hirshfeld surface analysis quantifies the framework‐adsorbate interaction landscape, and fixed‐bed breakthrough measurements demonstrate efficient recovery of high‐purity methane from both binary and ternary feed mixtures. This work establishes ligand‐directed functional site integration as a viable approach for engineering multifunctional adsorbents within unified framework architectures.
- 19 May 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (21) , 12004-12012
Amino Functionalization-Induced Coordination Geometry Switch Enables Pore Size Exclusion and Selective CHF 3 Capture in Two Cu-Based Metal–Organic Frameworks
The coordination geometry of metal nodes is a critical yet overlooked variable in metal–organic framework (MOF) design. Here, we show that an amino substituent on the isonicotinic acid linker switches Cu(II) from five-coordinate square-pyramidal to four-coordinate square-planar, collapsing the framework from a 3D microporous network (Cu-ina, ina = isonicotinic acid) to a 2D layered structure (Cu-2ain, 2ain = 2-aminoisonicotinic acid). The amino group strengthens the Cu–N bond and eliminates one Cu–O contact, reducing the pore-limiting diameter to 3.27 Å and imposing complete size exclusion of both CHF3 (∼4.6 Å) and N2 (3.64 Å) in Cu-2ain. The 3D framework Cu-ina, free of this modification, achieves a CHF3 uptake of 50.1 cm3 g–1 at 298 K with an IAST selectivity of 46 for CHF3/N2, driven by cooperative C–H···F and C–H···O hydrogen bonding confirmed by GCMC simulations and DFT calculations. Five-cycle breakthrough experiments confirm excellent regenerability. This work demonstrates that ligand functionalization can inadvertently restructure metal coordination geometry and collapse framework dimensionality, overriding any intended surface-chemical benefit.
- 19 May 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (21) , 12004-12012
Amino Functionalization-Induced Coordination Geometry Switch Enables Pore Size Exclusion and Selective CHF 3 Capture in Two Cu-Based Metal–Organic Frameworks
The coordination geometry of metal nodes is a critical yet overlooked variable in metal–organic framework (MOF) design. Here, we show that an amino substituent on the isonicotinic acid linker switches Cu(II) from five-coordinate square-pyramidal to four-coordinate square-planar, collapsing the framework from a 3D microporous network (Cu-ina, ina = isonicotinic acid) to a 2D layered structure (Cu-2ain, 2ain = 2-aminoisonicotinic acid). The amino group strengthens the Cu–N bond and eliminates one Cu–O contact, reducing the pore-limiting diameter to 3.27 Å and imposing complete size exclusion of both CHF3 (∼4.6 Å) and N2 (3.64 Å) in Cu-2ain. The 3D framework Cu-ina, free of this modification, achieves a CHF3 uptake of 50.1 cm3 g–1 at 298 K with an IAST selectivity of 46 for CHF3/N2, driven by cooperative C–H···F and C–H···O hydrogen bonding confirmed by GCMC simulations and DFT calculations. Five-cycle breakthrough experiments confirm excellent regenerability. This work demonstrates that ligand functionalization can inadvertently restructure metal coordination geometry and collapse framework dimensionality, overriding any intended surface-chemical benefit.
- Open Access
- 15 April 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (21) , e6088623
A Robust Metal‐Organic Framework With ‘Molecular Gates’ for Efficient Separation of Ethane From Ethylene
Ethane‐selective sorbents can enable single‐step purification of ethylene but remain elusive to date. We report a Zn‐based metal‐organic framework ( ZAI‐3N ) decorated with amino‐based ‘molecular gates’ that exhibit highly selective adsorption of C 2 H 6 over C 2 H 4 . Upon activation, ZAI‐3N (zinc‐adenine‐3‐aminoisonicotinic acid) features contractions of both Zn─N bonds and pores (from 2.009 to 1.914 Å and from 4.88 × 3.40 to 3.47 × 2.75 Å 2 , respectively). At 313 K and 1 bar, ZAI‐3N exhibits an exceptional ratio of 10.6 for C 2 H 6 /C 2 H 4 uptakes and a benchmark selectivity of 11.7, outperforming state‐of‐the‐art porous solids. Synchrotron X‐ray powder diffraction and modelling reveal that the methyl group in C 2 H 6 can trigger amino rotation and facilitate gate opening, while π‐electrons of C 2 H 4 hinder such a process with a notably increased barrier (~5 and 11 kJ mol −1 , respectively). Dynamic breakthrough experiments confirm the efficient separation of C 2 H 6 /C 2 H 4 (v/v = 5/5 and 1/9), affording C 2 H 4 with a high purity of 99.4% in single step with excellent recyclability and an C 2 H 4 productivity of 10.3 mL g −1 . This work demonstrates the judicious choice of ‘molecular gate’ as a promising protocol for challenging industrial gas separations.
- 15 April 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (21) , e6088623
Open AccessA Robust Metal‐Organic Framework With ‘Molecular Gates’ for Efficient Separation of Ethane From Ethylene
Ethane‐selective sorbents can enable single‐step purification of ethylene but remain elusive to date. We report a Zn‐based metal‐organic framework ( ZAI‐3N ) decorated with amino‐based ‘molecular gates’ that exhibit highly selective adsorption of C 2 H 6 over C 2 H 4 . Upon activation, ZAI‐3N (zinc‐adenine‐3‐aminoisonicotinic acid) features contractions of both Zn─N bonds and pores (from 2.009 to 1.914 Å and from 4.88 × 3.40 to 3.47 × 2.75 Å 2 , respectively). At 313 K and 1 bar, ZAI‐3N exhibits an exceptional ratio of 10.6 for C 2 H 6 /C 2 H 4 uptakes and a benchmark selectivity of 11.7, outperforming state‐of‐the‐art porous solids. Synchrotron X‐ray powder diffraction and modelling reveal that the methyl group in C 2 H 6 can trigger amino rotation and facilitate gate opening, while π‐electrons of C 2 H 4 hinder such a process with a notably increased barrier (~5 and 11 kJ mol −1 , respectively). Dynamic breakthrough experiments confirm the efficient separation of C 2 H 6 /C 2 H 4 (v/v = 5/5 and 1/9), affording C 2 H 4 with a high purity of 99.4% in single step with excellent recyclability and an C 2 H 4 productivity of 10.3 mL g −1 . This work demonstrates the judicious choice of ‘molecular gate’ as a promising protocol for challenging industrial gas separations.