Shirley Leite Reis
Research Subjects
Shirley Leite Reis has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Eliana Navarro Santos Muccillo
Center of Science and Technology of Materials, Energy and Nuclear Research Institute, Cidade Universitária, Av. Prof. Lineu Prestes, 2242, São Paulo 05508-000, SP, Brazil
11 shared publications - Reginaldo Muccillo
Center of Science and Technology of Materials, Energy and Nuclear Research Institute, Cidade Universitária, Av. Prof. Lineu Prestes, 2242, São Paulo 05508-000, SP, Brazil
4 shared publications E.N.S. Muccillo
3 shared publications- Cyrile F. N. Gonin
Institute for Innovation in Electrochemistry-SENAI, Curitiba 80215-090, PR, Brazil
2 shared publications E. N. S. Muccillo
Energy and Nuclear Research Institute - IPEN, São Paulo, Brazil
2 shared publications- Marcos Antonio Coelho Berton
Senai Innovation Institute for Electrochemistry
2 shared publications
Latest Publications
- Open Access
Impedance Spectroscopy Analysis of Field-Assisted Sintered Sr- and Mg-Doped Lanthanum Gallate
In this study, the relationship between the microstructure and electrical conductivity of doped lanthanum gallate was investigated to identify the origin of the relatively high resistivity of the grain boundaries in this ceramic solid electrolyte. LaGaO3 containing acceptor dopants, Sr and Mg, was chemically synthesized and consolidated by field-assisted sintering technology. The relative density achieved 98% upon sintering at 1200 °C, and no intragrain porosity was found. The microstructure consisted of submicron-sized grains and exhibited a predominantly transgranular fracture mode. Structural characterization evidenced that all sintered samples display the characteristic orthorhombic crystal structure. Rietveld analysis revealed a secondary phase content of only ~0.71% in samples sintered at 1200 °C. In addition, Raman spectra revealed only the allowed characteristic vibrational modes expected for doped lanthanum gallate. The electrical conductivity was determined by impedance spectroscopy analysis. The bulk conductivity of sintered samples was found to be independent of the sintering temperature. Analysis of the grain boundary resistivity revealed a dependence on the mean grain size, which constricts the pathway of the charge carriers, leading to the formation of space charge layers. The total activation energy determined for conduction is 0.94 eV.
Open AccessImpedance Spectroscopy Analysis of Field-Assisted Sintered Sr- and Mg-Doped Lanthanum Gallate
In this study, the relationship between the microstructure and electrical conductivity of doped lanthanum gallate was investigated to identify the origin of the relatively high resistivity of the grain boundaries in this ceramic solid electrolyte. LaGaO3 containing acceptor dopants, Sr and Mg, was chemically synthesized and consolidated by field-assisted sintering technology. The relative density achieved 98% upon sintering at 1200 °C, and no intragrain porosity was found. The microstructure consisted of submicron-sized grains and exhibited a predominantly transgranular fracture mode. Structural characterization evidenced that all sintered samples display the characteristic orthorhombic crystal structure. Rietveld analysis revealed a secondary phase content of only ~0.71% in samples sintered at 1200 °C. In addition, Raman spectra revealed only the allowed characteristic vibrational modes expected for doped lanthanum gallate. The electrical conductivity was determined by impedance spectroscopy analysis. The bulk conductivity of sintered samples was found to be independent of the sintering temperature. Analysis of the grain boundary resistivity revealed a dependence on the mean grain size, which constricts the pathway of the charge carriers, leading to the formation of space charge layers. The total activation energy determined for conduction is 0.94 eV.
- Open Access
Effect of Zr4+ on Lithium-Ion Conductivity of Garnet-Type Li5+xLa3(Nb2−xZrx)O12 Solid Electrolytes
Garnet-type structured electrolytes are considered a key technology for the next generation of lithium-ion batteries such as all-solid-state batteries. Cubic Garnet-type solid oxides with composition Li5+xLa3(Nb2−xZrx)O12 (x between 0 and 1.5) were synthesized by solid-state reaction and sintered by spark plasma sintering. Powder characterization indicates the formation of solid solution with high chemical homogeneity and spherical particles. High relative densities (>96%) were obtained by spark plasma sintering at 950 °C for 10 min and pressure application of 50 MPa. Although the formation of secondary phase La2Zr2O7 was identified by the X-ray diffraction patterns of Zr-doped pellets, it has been eliminated for x = 0.75 and 1 by conventional heat treatment at 850 °C for 1 h. High ionic conductivity values were attained for x ≥ 0.75, reaching a maximum value in the order of 10−4 S.cm−1 at 25 °C with activation energy of 0.38 eV. The results indicated that Zr4+ promoted significant increasing of the lithium-ion conductivity by lowering the activation energy.
Open AccessEffect of Zr4+ on Lithium-Ion Conductivity of Garnet-Type Li5+xLa3(Nb2−xZrx)O12 Solid Electrolytes
Garnet-type structured electrolytes are considered a key technology for the next generation of lithium-ion batteries such as all-solid-state batteries. Cubic Garnet-type solid oxides with composition Li5+xLa3(Nb2−xZrx)O12 (x between 0 and 1.5) were synthesized by solid-state reaction and sintered by spark plasma sintering. Powder characterization indicates the formation of solid solution with high chemical homogeneity and spherical particles. High relative densities (>96%) were obtained by spark plasma sintering at 950 °C for 10 min and pressure application of 50 MPa. Although the formation of secondary phase La2Zr2O7 was identified by the X-ray diffraction patterns of Zr-doped pellets, it has been eliminated for x = 0.75 and 1 by conventional heat treatment at 850 °C for 1 h. High ionic conductivity values were attained for x ≥ 0.75, reaching a maximum value in the order of 10−4 S.cm−1 at 25 °C with activation energy of 0.38 eV. The results indicated that Zr4+ promoted significant increasing of the lithium-ion conductivity by lowering the activation energy.
- 10 August 2020
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 146 (4) , 1561-1567
Thermal and spectroscopic characterization of sol–gel-synthesized doped lanthanum gallate
- 10 August 2020
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 146 (4) , 1561-1567
Thermal and spectroscopic characterization of sol–gel-synthesized doped lanthanum gallate
- Open Access
Electrical Behavior of Electric Field-Assisted Pressureless Sintered Ceria-20 mol% Samaria
CeO2:20 mol% Sm2O3 green ceramic pellets were sintered conventionally at 1500 °C/2 h and flash sintered by applying a 200 V cm−1 electric field at 800 °C, 1000 °C and 1200 °C. The thickness shrinkage of the pellets was followed bythe specimen being positioned inside a dilatometer adapted with platinum electrodes and terminal leads connected to a power supply for application of the electric voltage. The microstructure of the surfaces of the sintered samples were observed in a scanning electron microscope. The electrical properties were evaluated by the impedance spectroscopy technique in the 5 Hz–13 MHz frequency range from 210 °C to 280 °C. The main results show that (i) the final shrinkage level is nearly independent of the temperature when the electric field is applied and slightly better than that of the 1500 °C sintered pellet, and (ii) the bulk conductivity of the sample flash sintered at 1200 °C is similar to that of the sample sintered at 1500 °C. The availability of a pathway for the electric current pulse derived from the applied electric field is proposed as the reason for the achieved shrinkages. Scavenging of the grain boundaries by Joule heating is proposed as the reason for the improved oxide ion bulk conductivity.
Open AccessElectrical Behavior of Electric Field-Assisted Pressureless Sintered Ceria-20 mol% Samaria
CeO2:20 mol% Sm2O3 green ceramic pellets were sintered conventionally at 1500 °C/2 h and flash sintered by applying a 200 V cm−1 electric field at 800 °C, 1000 °C and 1200 °C. The thickness shrinkage of the pellets was followed bythe specimen being positioned inside a dilatometer adapted with platinum electrodes and terminal leads connected to a power supply for application of the electric voltage. The microstructure of the surfaces of the sintered samples were observed in a scanning electron microscope. The electrical properties were evaluated by the impedance spectroscopy technique in the 5 Hz–13 MHz frequency range from 210 °C to 280 °C. The main results show that (i) the final shrinkage level is nearly independent of the temperature when the electric field is applied and slightly better than that of the 1500 °C sintered pellet, and (ii) the bulk conductivity of the sample flash sintered at 1200 °C is similar to that of the sample sintered at 1500 °C. The availability of a pathway for the electric current pulse derived from the applied electric field is proposed as the reason for the achieved shrinkages. Scavenging of the grain boundaries by Joule heating is proposed as the reason for the improved oxide ion bulk conductivity.
- 1 April 2019
- Published by Elsevier in Ceramics International
- Vol. 45 (5) , 5218-5222
Sintering evaluation of doped lanthanum gallate based on thermodilatometry
- 1 April 2019
- Published by Elsevier in Ceramics International
- Vol. 45 (5) , 5218-5222
Sintering evaluation of doped lanthanum gallate based on thermodilatometry
- Open Access
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 22 (suppl 1)
Influence of Yttria-Stabilized Zirconia on Microstructure and Electrical Properties of Doped Lanthanum Gallate
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 22 (suppl 1)
Open AccessInfluence of Yttria-Stabilized Zirconia on Microstructure and Electrical Properties of Doped Lanthanum Gallate
- 1 January 2018
- Published by Elsevier in Ceramics International
- Vol. 44 (1) , 115-119
Influence of small amounts of gallium oxide addition on ionic conductivity of La0.9Sr0.1Ga0.8Mg0.2O3-δ solid electrolyte
- 1 January 2018
- Published by Elsevier in Ceramics International
- Vol. 44 (1) , 115-119
Influence of small amounts of gallium oxide addition on ionic conductivity of La0.9Sr0.1Ga0.8Mg0.2O3-δ solid electrolyte
- 16 November 2017
- Published by Springer Nature in Ionics
- Vol. 24 (6) , 1693-1700
Preparation of dense La0.9Sr0.1Ga0.8Mg0.2O3-δ with high ionic conductivity by solid-state synthesis
- 16 November 2017
- Published by Springer Nature in Ionics
- Vol. 24 (6) , 1693-1700
Preparation of dense La0.9Sr0.1Ga0.8Mg0.2O3-δ with high ionic conductivity by solid-state synthesis
- 1 October 2017
- Published by Elsevier in Ceramics International
- Vol. 43 (14) , 10934-10938
Improved ionic conductivity of zirconia-scandia with niobia addition
- 1 October 2017
- Published by Elsevier in Ceramics International
- Vol. 43 (14) , 10934-10938
Improved ionic conductivity of zirconia-scandia with niobia addition
- 31 August 2017
- Published by The Electrochemical Society in ECS Transactions
- Vol. 80 (9) , 141-149
Ionic Conductivity of Doped Lanthanum Gallate and Strontium Gallate Composites
Polycrystalline ceramic solid electrolytes based on strontium- and magnesium-doped lanthanum gallate exhibit high ionic conductivity and find potential application in solid oxide fuel cells operating at intermediate temperatures. Sintering of this solid electrolyte is usually carried out at high temperatures, being responsible for loss of Ga and consequent formation of impurity phases. In this work, composites consisting of La0.9Sr0.1Ga0.8Mg0.2O3-δ with additions of strontium gallate were prepared by solid state reaction, and the influence of the additive on electrical conductivity and phase composition of the composite electrolyte was investigated. The sintered density of composites is higher than 95% of the theoretical value after sintering at 1350°C. The contents of impurity phases decreased with increasing additions of strontium gallate. The overall ionic conductivity of the composites is higher than that of LSGM. This effect is attributed to the decrease in the fraction of free MgO at grain boundaries in the composites.
- 31 August 2017
- Published by The Electrochemical Society in ECS Transactions
- Vol. 80 (9) , 141-149
Ionic Conductivity of Doped Lanthanum Gallate and Strontium Gallate Composites
Polycrystalline ceramic solid electrolytes based on strontium- and magnesium-doped lanthanum gallate exhibit high ionic conductivity and find potential application in solid oxide fuel cells operating at intermediate temperatures. Sintering of this solid electrolyte is usually carried out at high temperatures, being responsible for loss of Ga and consequent formation of impurity phases. In this work, composites consisting of La0.9Sr0.1Ga0.8Mg0.2O3-δ with additions of strontium gallate were prepared by solid state reaction, and the influence of the additive on electrical conductivity and phase composition of the composite electrolyte was investigated. The sintered density of composites is higher than 95% of the theoretical value after sintering at 1350°C. The contents of impurity phases decreased with increasing additions of strontium gallate. The overall ionic conductivity of the composites is higher than that of LSGM. This effect is attributed to the decrease in the fraction of free MgO at grain boundaries in the composites.