SASertac Aksakalli

Sertac Aksakalli

*This is an algorithmically generated author record based on publicly available information.

Sertac Aksakalli has a total of 44 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Toward environmentally efficient orthodontic imaging: assessing JPEG compression effects on automated artificial intelligence and manual cephalometric analysis

    by Sertaç Aksakallı, Halit Hami Öz, Erhan Demir, İrem Aydın

    Objective: This study evaluates the impact of various JPEG compression levels (1.0, 0.8, 0.5, and 0.3) on the stability and accuracy of cephalometric analyses performed by a manual expert and three commercial AI (artificial intelligence) software packages (CranioCatch, CEPHX, and WEBCEPH). Materials and Methods: Forty digital lateral cephalometric radiographs were compressed into four quality levels using a standardized web application (ImageMagick v7.1.0). A total of 10 measurements, categorized into skeletal, dental, and soft-tissue parameters, were analyzed. Measurement stability was assessed using the Friedman test, while agreement with the manual reference standard was evaluated using intraclass correlation coefficients (ICCs) and mean absolute error. Results: Stability was maintained across most parameters up to the 0.3 compression level (70% quality reduction) (P > .05). Significant discrepancies were found between AI engines relative to the manual standard. The highest variation occurred in the Nasolabial angle, with a 20.95° difference between the manual expert and WEBCEPH. Baseline agreement with the manual standard ranged from low to excellent across parameters (ICC 0.50–0.96), with the highest agreement for interincisal angle and U1/SN, and the lowest for SNA, nasolabial angle, and U1 to NA (mm). While skeletal parameters showed high inter-software consistency, soft-tissue and dental inclination assessments revealed a significant lack of standardization. Conclusion: High JPEG compression (down to 0.3) produced no clinically meaningful measurement changes in high-quality radiographs, providing a 70%–80% file size reduction supporting “Green Radiology” goals. However, baseline diagnostic variations between AI platforms necessitate consistent single-software use for longitudinal tracking.

  • Open Access

    Does piezocision induce root resorption or periodontal problems in class II patients?: A 2-year follow-up study

    by Sertac Aksakalli, Seref Ezirganli, Erhan Demir

    OBJECTIVE: This study aimed to evaluate the potential for root resorption and periodontal complications in patients with Class II malocclusion undergoing piezocision-assisted orthodontic treatment over a 2-year follow-up period. MATERIALS AND METHODS: Twenty patients (11 females, 9 males; mean age: 16.1 ± 2.8 years) requiring bilateral canine distalization and maxillary first premolar extraction were included in this split-mouth study. One quadrant was randomly assigned to undergo piezocision, while the contralateral quadrant served as the control. Panoramic radiographs were utilized to assess root resorption at baseline (T1), and 2 years post-treatment (T2). Additionally, gingival health and tooth mobility scores were evaluated. Statistical analyses were performed using the Wilcoxon signed-rank test. RESULTS: No clinically significant root resorption was observed in either group. Mild resorption was noted on the upper canine of one patient in the piezocision group, while another patient in the control group exhibited resorption on the upper lateral incisor. Gingival health, and mobility scores decreased from T1 to T2 in both groups, with no statistically significant differences found between the piezocision and control sides. Scar formation on the attached gingiva was observed in one patient following piezocision; however, this was not associated with bone loss or increased periodontal pocket depth. CONCLUSION: Piezocision-assisted orthodontic treatment did not result in clinically significant root resorption or adverse periodontal outcomes in patients with Class II malocclusion over a 2-year period. These findings support the safety of piezocision as a method for accelerating tooth movement without compromising periodontal health. Further research with larger sample sizes and histological assessments is recommended to validate these results.


  • Effects of a new combination folkloric medicinal plant extract on bone formation in orthopedically expanded suture in rats

    by Şeref Ezi̇rganli, Hakan Özdemi̇r, Muhammed Bi̇rli̇k, Oguz Kazanci̇oglu, Sertaç Aksakalli, Mukaddes Eşrefoğlu

    Objectives. The aim of this study was to evaluate histological effects of a new combination folkloric medicinal plant extract on bone healing in premaxillary suture expansion in rats. Materials and methods. Thirty male Sprague–Dawley rats were used in this study. Rats were evenly divided into three groups (one control and two experimental groups) of ten each. The animals were subjected to premaxillary suture expansion by helix springs. The only expansion group is defined as the control group (Group A). The experimental groups are defined as OstokinPlus-10 (Group B) and OstokinPlus-20 (Group C). In the experimental groups, 10 and 20 ml/kg OstokinPlus herbals were applied systemically after the expansion by use of an orogastric tube during the time of study. The springs were placed and activated to deliver a 30 cN force. After 5 days, the springs were removed and replaced with short lengths of rectangular retaining wire. Tooth separation was maintained for 15 days. After a consolidation period of 15 days, the animals were euthanatized and the maxillary bone containing the midpalatal suture cartilage was surgically removed. The specimens were prepared for histomorphometric assessment of the regenerated bone. Results. The midpalatal suture was successfully distracted following application of the activated helix spring. The distracted premaxillary suture was filled with new bone formation and unorganized fibrous tissues. Newly formed bone percentage and the bone area were found to have significant differences (p< 0.05). For investigated parameters, Group B and Group C revealed more positive results than Group A. Conclusion: OstokinPlus herbal had positive effects on bone healing and formation during premaxillary suture expansion

  • Effect of Grape Seed Extract on Bone Formation in The Expanded Inter-premaxillary Suture

    by Sertaç Aksakallı, Şeref Ezirganlı, Muhammet Birlik, Hakkı Oğuz Kazancıoğlu, Mehmet Şerif Aydın


  • Open Access

    Accelerated Tooth Movement with Orthodontic Mini‐Screws

    by S Aksakalli, A Balaban, K Nazaroglu, E Saglam

    This case report outlines the possibility of accelerated tooth movement with the combination of microosteoperforation and mini‐screws. A 14‐year‐old male patient presented Class II malocclusion with maxillary incisor protrusion. Upper first premolars were extracted, and after leveling, accelerated canine distalization started. For pre‐ and postdistalization times, amount of distalization, periodontal health, and root resorption were assessed. Within the limitations of this case report, micro‐osteoperforations with mini‐screw have a potential for shortening the treatment time.


  • Accelerated tooth movement with piezocision and its periodontal-transversal effects in patients with Class II malocclusion

    by Sertac Aksakalli, Berra Calik, Burcak Kara, Seref Ezirganli

    Objective: : To compare the extent of canine distalization and the transversal changes, postdistalization gingival indices, and mobility scores between patients who were undergoing orthodontic treatment involving upper premolar extraction with (experimental group) or without piezocision. Materials and Methods: : Twenty maxillary canines of 10 patients were evaluated with split mouth design. Pre- and postdistalization dental casts were prepared and scanned with an orthodontic scanner to compare the extent of distalization and transversal changes between the two groups. The pre- and postdistalization gingival indices and mobility scores were also calculated. Results: : Three-dimensional analysis of the models revealed significant differences in tooth movement (lesser anchorage loss and greater canine distalization) between the experimental and control groups. Furthermore, the distalization time was shortened in the experimental group. There were no differences in the transversal changes, pre- and postdistalization gingival indices, or mobility scores between groups. Conclusion: : Piezocision-assisted distalization accelerates tooth movement, decreases the anchorage loss for posterior teeth, and does not induce any maxillary transversal change. Moreover, piezocision does not have any adverse effects on periodontal health.


  • Effectiveness of two different splints to treat temporomandibular disorders

    by S. Aksakalli, F. Temucin, A. Pamukcu, S. Ezirganlı, H.O. Kazancioglu, M.A. Malkoc

    Nearly 5 % of the the world’s population has temporomandibular disorder (TMD) severe enough to make them seek treatment. A third of the total population has at least one TMD symptom. There are different types of splints to treat TMD. In our study, we compared the success of two different appliances [stabilization splint (ss), nociceptive trigeminal inhibition splint (NTI)] by using Fonseca’s questionnaire, the OHQoL-UK and visual analog scale (VAS). A total of 40 patients suffering from TMD were included in this study and answered questionnaires twice, at the beginning of the treatment and 3 months later. Regarding TMD alone, 39 patients (97.5 %) had some degree of the disorder, 7 of of these cases being mild (17.5 %), 15 moderate (37.5 %), and 17 severe (42.5 %). We analyzed posttreatment changes compared to baseline. Pain complaints decreased in both groups, and the OHQoL-UK revealed better quality of life after treatment. Based on the posttreatment Fonseca’s questionnaires, significant changes in the patients’ complaints in the group SS (p < 0.01) were observed. The group NTI also displayed changes but these were not statistically significant after treatment (p > 0.05). Patients in both groups had fewer TMD complaints after TMJ treatment. According to the Fonseca’s questionnaire, the patients’ major TMD complaint was clenching–grinding, followed by pain in the craniomandibular joint, or earache. Temporomandibuläre Dysfunktionen (TMD) von einer Schwere, dass sich die Betroffenen deswegen in Behandlung begeben, haben eine weltweite Prävalenz von fast 5 %. Ein Drittel der Gesamtbevölkerung leidet an wenigstens einem relevanten Symptom. Zur Behandlung von TMD werden diverse Arten von Schienen verwendet. Wir verglichen in dieser Studie das Abschneiden einer Stabilisierungsschiene bzw. einer Trigeminusinhibitionsschiene (auch als NTI-tss-Schiene bekannt) anhand von 2 Fragebögen (nach Fonseca sowie OHQoL-UK zur mundgesundheitsbezogenen Lebensqualität) und einer visuellen Analogskala (VAS). Insgesamt 40 TMD-Patienten wurden aufgenommen, zu Therapiebeginn und nach 3 Behandlungsmonaten füllten sie die Fragebögen aus. Rein auf die TMD bezogen zeigten 39 der Patienten (97,5 %) eine Dysfunktion unterschiedlichen Schweregrads: 7 dieser Fälle waren leicht (17,5 %), 15 mittelschwer (37,5 %) und 17 schwer (42,5 %). Ausgewertet wurden die posttherapeutischen Veränderungen gegenüber den Ausgangssituationen. In beiden Gruppen nahmen die Schmerzen ab und das Instrument OHQoL-UK offenbarte Verbesserungen in der Lebensqualität. Anhand der posttherapeutisch ausgefüllten Fonseca-Fragebögen verzeichneten wir in der Gruppe mit den Stabilisierungsschienen signifikante Veränderungen der Beschwerden (p < 0,01). Auch in der Gruppe mit den Trigeminusinhibitionsschienen fanden sich Veränderungen, sie fielen aber nicht signifikant aus (p > 0,05). In beiden Gruppen hatten die Patienten nach der Behandlung weniger TMD-Beschwerden. Knirschen/Pressen war die im Fonseca-Fragebogen am häufigsten angegebene Beschwerde, gefolgt von Kiefergelenk- oder Ohrenschmerzen.


  • Physical properties of different orthodontic cements

    by S. Aksakalli, M.A. Malkoc, B. Corekci, S. Malkoc, E. Toy

    Introduction We evaluated the water absorption, solubility, and compressive strength of different cements and resin-modified glass ionomer cements (RMGICs), namely Adhesor®, Ketac™ Cem, Ortho Band Paste LC™, Glass Ionomer Band Cement, and Transbond™ Plus. Our aims were to compare the mechanical and physical properties of the cements widely used in orthodontics and to define the most suitable cements in an oral environment in terms of those characteristics. Materials and methods To assess compressive strength, the cements were subjected to compression tests done on a universal testing machine. To test water absorption and solubility, the weight changes in cement specimens were determined after immersion in distilled water for 1, 7, and 30 days. Results Adhesor® and Ketac™ Cem presented significantly higher solubility values than other cements after water immersion for 1, 7, and 30 days (p < 0.001). Conclusion Our results revealed that the traditional orthodontic cements have higher water solubility and water absorption values as well as lower compressive strength values than the RMGICs used in this study. Furthermore, Transbond™ Plus revealed the highest compressive strength, whereas Adhesor® showed the lowest. Einleitung Wir beurteilten die Wasseraufnahme, Löslichkeit und Druckfestigkeit der Zemente (darunter kunststoffmodifizierte Glasionimerzemente) Adhesor® von Spofa Dental, Ketac™ Cem von 3M Espe, Transbond™ Plus von 3M Unitek, Ortho Band Paste LC™ von Bisco, Multi-Cure von 3M Unitek und Transbond™ Plus von 3M Unitek. Das Ziel bestand in einem Vergleich der mechanischen und physikalischen Eigenschaften in der Kieferorthopädie verbreitet angewendeter Zemente, um herauszufinden, welche von ihnen in einer oralen Umgebung diesbezüglich am besten abschneiden. Material und Methode Diverse Zementproben wurden zur Beurteilung ihrer Druckfestigkeit in einer Universalprüfmaschine auf Druck belastet und zur Prüfung ihrer Wasseraufnahme und Wasserlöslichkeit nach 1 Tag, 1 Woche und 1 Monat Immersion in destilliertem Wasser auf Gewichtsänderungen analysiert. Resultate Adhesor® und Ketac™ Cem zeigten nach 1, 7 und 30 Tagen Immersion signifikant höhere Löslichkeitswerte als die kunststoffmodifizierten Glasionomerzemente (p < 0,001). Schlussfolgerung Die traditionellen kieferorthopädischen Zemente sind laut unseren Ergebnissen stärker wasserlöslich, stärker wasserabsorbierend und weniger druckfest als die untersuchten kunststoffmodifizierten Glasionomerzemente. Außerdem zeigte Transbond™ Plus die höchste Druckfestigkeit, Adhesor® hingegen die niedrigste.

  • Porcelain laminate veneer conditioning for orthodontic bonding: SEM-EDX analysis

    by Sertac Aksakalli, Zehra Ileri, Tevfik Yavuz, Meral Arslan Malkoc, Nilgun Ozturk

    The purpose of this in vitro study was to evaluate and compare the effects of different surface treatments and laser irradiation on the bond strength of brackets bonded to porcelain laminate veneer. Porcelain laminate veneer specimens were embedded in the centers of acrylic resin blocks. Thirty-nine teeth were used for shear bond strength testing and the remaining three (one tooth for each group) were used for evaluation of the debonded bracket interface. Specimens were randomly divided into three groups, each containing 13 specimens. The details of the groups are as follows: Group SB, sandblasting with alumina particles (50 μm); Group HFA, 9.6 % hydrofluoric acid etching; Group ER, erbium-doped yttrium–aluminum–garnet (Er: YAG) irradiation (from 1 mm distance, 2 W, 10 Hz for 10 s). After conditioning, the upper central brackets were bonded to the porcelain surfaces. Porcelain laminate veneers were examined under stereomicroscope for adhesive remnant index and surface damage after debonding. The highest shear bond strength values were obtained with Group HFA (10.8 ± 3.8 MPa) and Group ER (9.3 ± 1.5 MPa), whereas Group SB revealed the lowest values. Scanning electron microscopy energy-dispersive X-ray (SEM-EDX) analysis revealed that the silicon level in the porcelain decreased after debonding in all groups. The sandblasting method did not demonstrate any ideal bond strength values; however, the 9.6 % hydrofluoric acid etching and Er: YAG laser did. There were no significant differences among all groups in terms of laminate surface damages. The Er: YAG laser therefore can be selected for ideal bond strength and minimal damage to porcelain laminates.