Christian Zwiener
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Christian Zwiener has a total of 180 co-authors. Here are the top co-authors by number of shared publications:
- Jonathan Zweigle
Department of Plant and Environmental Science, University of Copenhagen, Thorvaldsensvej 40, Frederiksberg C, Denmark
14 shared publications Boris Bugsel
TZW, DVGW-Technologiezentrum Wasser (German Water Centre), Karlsruhe, Germany
10 shared publications- Selina Tisler
Analytical Chemistry Group, Department of Plant and Environmental Science, Faculty of Science, University of Copenhagen, Thorvaldsensvej 40, 1871 Frederiksberg C, Denmark
7 shared publications - Sylvain Merel
Institute of Marine Research, P. O. Box 1870 Nordnes, 5817 Bergen, Norway Bergen, Norway
6 shared publications - Boris Bugsel
Environmental Analytical Chemistry, Department of Geosciences, University of Tübingen, Schnarrenbergstraße 94-96, 72076 Tübingen, Germany
5 shared publications Sascha Lege
University of Tübingen, Environmental Analytical Chemistry at the Center for Applied Geoscience, Hölderlinstraße 12, 72074, Tübingen, Germany
5 shared publications
Latest Publications
- Open Access
- 2 November 2026
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Advances
- Vol. 5 (11) , 2704-2713
Thermal desorption and transformation of AFFF compound Capstone B on different sorbent materials
Thermal remediation approaches have been discussed as viable options for PFAS contaminated soils. In this context, we investigated thermal desorption and transformation behavior of Capstone B.
- 2 November 2026
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Advances
- Vol. 5 (11) , 2704-2713
Open AccessThermal desorption and transformation of AFFF compound Capstone B on different sorbent materials
Thermal remediation approaches have been discussed as viable options for PFAS contaminated soils. In this context, we investigated thermal desorption and transformation behavior of Capstone B.
- Open Access
- 5 October 2026
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- p. 1-12
Implementation of a mixed-mode liquid chromatography-based analysis to assess fluorinated inorganic anions and (ultra)-short chain PFAS contamination in surface waters
Ultra-short-chain (USC) per- and polyfluoroalkyl substances (PFAS) are polar, mobile, and persistent and are increasingly focused on because of their widespread occurrence in various environmental matrices. One reason why they were previously often overlooked is their insufficient retention in reversed-phase liquid chromatography which is the standard analytical method in most laboratories for PFAS analysis. In this study, a method using mixed-mode liquid chromatography (MMLC) coupled to tandem mass spectrometry (MS/MS) was optimized for the detection and quantification of five USC PFAS (C2 and C3 perfluorocarboxylic acids (PFCAs) and C1 to C3 perfluorosulfonic acids (PFSAs)), four short-chain (SC) PFAS (C4-C6 PFCAs and C4 PFSA), bis(trifluoromethane)sulfonimide (NTf2), and the three fluorinated inorganic anions (FIAs): tetrafluoroborate (BF4−), hexafluorophosphate (PF6−), and hexafluoroarsenate (AsF6−). To investigate the conditions for optimal retention, different eluent constitutions were tested combining varying solvents and additives. USC PFAS could be analyzed using neutral conditions in the aqueous (A) and basic conditions in the organic eluent (B) whereas FIAs were measured with acidified A and basic B. The method was validated and matrix effects were corrected with mass-labeled standards and standard addition. The method was successfully applied to three surface water samples in which eight PFAS could be quantified. TFA and PF6− were found with the highest concentrations at 2.70 µg/L and 0.287 µg/L, respectively, while all other target PFAS occurred in the lower ng/L range. Thus, the sum concentration of TFA and PF6− accounted for more than 97% of the total PFAS concentration in all samples. Graphical abstract
- 5 October 2026
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- p. 1-12
Open AccessImplementation of a mixed-mode liquid chromatography-based analysis to assess fluorinated inorganic anions and (ultra)-short chain PFAS contamination in surface waters
Ultra-short-chain (USC) per- and polyfluoroalkyl substances (PFAS) are polar, mobile, and persistent and are increasingly focused on because of their widespread occurrence in various environmental matrices. One reason why they were previously often overlooked is their insufficient retention in reversed-phase liquid chromatography which is the standard analytical method in most laboratories for PFAS analysis. In this study, a method using mixed-mode liquid chromatography (MMLC) coupled to tandem mass spectrometry (MS/MS) was optimized for the detection and quantification of five USC PFAS (C2 and C3 perfluorocarboxylic acids (PFCAs) and C1 to C3 perfluorosulfonic acids (PFSAs)), four short-chain (SC) PFAS (C4-C6 PFCAs and C4 PFSA), bis(trifluoromethane)sulfonimide (NTf2), and the three fluorinated inorganic anions (FIAs): tetrafluoroborate (BF4−), hexafluorophosphate (PF6−), and hexafluoroarsenate (AsF6−). To investigate the conditions for optimal retention, different eluent constitutions were tested combining varying solvents and additives. USC PFAS could be analyzed using neutral conditions in the aqueous (A) and basic conditions in the organic eluent (B) whereas FIAs were measured with acidified A and basic B. The method was validated and matrix effects were corrected with mass-labeled standards and standard addition. The method was successfully applied to three surface water samples in which eight PFAS could be quantified. TFA and PF6− were found with the highest concentrations at 2.70 µg/L and 0.287 µg/L, respectively, while all other target PFAS occurred in the lower ng/L range. Thus, the sum concentration of TFA and PF6− accounted for more than 97% of the total PFAS concentration in all samples. Graphical abstract
- Open Access
- 11 July 2026
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- p. 1-12
AFFF on fire: new insights into the thermal fate of the AFFF compound Capstone B
The widespread use and uncontrolled release of per- and polyfluoroalkyl substances (PFAS) have led to numerous environmental contamination hotspots in the past. Frequently, these contaminations result from fire-fighting measures employing PFAS-containing aqueous film-forming foams (AFFF). Remediation of these sites is often expensive and generates large amounts of waste. Thermal remediation methods have been discussed as an economically viable option for PFAS-contaminated materials and soils. During thermal treatment, depending on the applied temperature and original PFAS, the formation of products of incomplete destruction (PIDs) occurs. These PIDs are problematic as they have not been characterized well in the past for AFFF PFAS and can accumulate during thermal treatment. We studied the thermal fate of AFFF PFAS 6:2 FTSAm-Pr-B, also known as Capstone B, under pyrolytic conditions over a temperature range from 100 to 800 °C. PIDs were characterized by liquid and gas chromatography coupled to (high-resolution) mass spectrometry (LC-(HR)MS and GC-HRMS). The degree of mineralization was determined by fluoride production and ranged between 5.3% at 200 °C and 61% at 600 °C. In total, we identified 55 PIDs over a temperature range from 100 to 400 °C (levels 1–4). At 600 and 800 °C, only fluoride was detected. The majority of the PIDs (47) was detected by nontarget screening (NTS) and PIDs were classified in five substance groups: fluorotelomer sulfonic acids (FTSAs), fluorotelomer sulfonamides (FTSAms), hydroxy-carboxylic acids (OH-CAs), unknown polyfluoro-hydroxy alkyls (PFOHs), and others. A mass balance (MB) was established by molar fluorine equivalents of the (semi)quantified PIDs. The MB showed that transformation processes of 6:2 FTSAm-Pr-B already started at temperatures above 150 °C. Between 200 and 400 °C, PIDs play a significant role and accounted for 8.5% of the fluorine MB at maximum. Graphical abstract
- 11 July 2026
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- p. 1-12
Open AccessAFFF on fire: new insights into the thermal fate of the AFFF compound Capstone B
The widespread use and uncontrolled release of per- and polyfluoroalkyl substances (PFAS) have led to numerous environmental contamination hotspots in the past. Frequently, these contaminations result from fire-fighting measures employing PFAS-containing aqueous film-forming foams (AFFF). Remediation of these sites is often expensive and generates large amounts of waste. Thermal remediation methods have been discussed as an economically viable option for PFAS-contaminated materials and soils. During thermal treatment, depending on the applied temperature and original PFAS, the formation of products of incomplete destruction (PIDs) occurs. These PIDs are problematic as they have not been characterized well in the past for AFFF PFAS and can accumulate during thermal treatment. We studied the thermal fate of AFFF PFAS 6:2 FTSAm-Pr-B, also known as Capstone B, under pyrolytic conditions over a temperature range from 100 to 800 °C. PIDs were characterized by liquid and gas chromatography coupled to (high-resolution) mass spectrometry (LC-(HR)MS and GC-HRMS). The degree of mineralization was determined by fluoride production and ranged between 5.3% at 200 °C and 61% at 600 °C. In total, we identified 55 PIDs over a temperature range from 100 to 400 °C (levels 1–4). At 600 and 800 °C, only fluoride was detected. The majority of the PIDs (47) was detected by nontarget screening (NTS) and PIDs were classified in five substance groups: fluorotelomer sulfonic acids (FTSAs), fluorotelomer sulfonamides (FTSAms), hydroxy-carboxylic acids (OH-CAs), unknown polyfluoro-hydroxy alkyls (PFOHs), and others. A mass balance (MB) was established by molar fluorine equivalents of the (semi)quantified PIDs. The MB showed that transformation processes of 6:2 FTSAm-Pr-B already started at temperatures above 150 °C. Between 200 and 400 °C, PIDs play a significant role and accounted for 8.5% of the fluorine MB at maximum. Graphical abstract
- Open Access
- 15 April 2026
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 418 (12) , 3487-3488
The challenges of PFAS – analysis, occurrence, fate, and exposure
- 15 April 2026
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 418 (12) , 3487-3488
Open AccessThe challenges of PFAS – analysis, occurrence, fate, and exposure
- Open Access
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Advances
- Vol. 5 (8) , 1856-1877
Per-and Polyfluoroalkyl Substances (PFAS): A Global Review of Sources, Contamination, Risks, Analytical Challenges, and Remediation Strategies
Per-and polyfluoroalkyl substances (PFAS) are a large class of synthetic fluorinated compounds extensively used in industrial applications and consumer products due to their exceptional chemical stability and resistance to degradation....
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Advances
- Vol. 5 (8) , 1856-1877
Open AccessPer-and Polyfluoroalkyl Substances (PFAS): A Global Review of Sources, Contamination, Risks, Analytical Challenges, and Remediation Strategies
Per-and polyfluoroalkyl substances (PFAS) are a large class of synthetic fluorinated compounds extensively used in industrial applications and consumer products due to their exceptional chemical stability and resistance to degradation....
- Open Access
- 11 November 2025
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 418 (12) , 3555-3565
Characterization of per- and polyfluoroalkyl substances (PFAS) in AFFF-contaminated soil by photocatalytic oxidation (PhotoTOP)
Per- and polyfluoroalkyl substances (PFAS) comprise a diverse group of thousands of compounds, for which only a limited number of analytical reference standards are available. This presents significant challenges for the identification and quantification of PFAS in environmental samples. The PhotoTOP assay addresses this issue by photocatalytic oxidation of PFAS precursors into quantifiable perfluoroalkyl carboxylic acids. In this study, the PhotoTOP was applied for the first time to both aqueous film-forming foam (AFFF)–related PFAS standards and AFFF-contaminated soil. Precursors, intermediates, and final oxidation products were identified using target analysis and non-target screening (NTS). Numerous novel PhotoTOP intermediates were detected, such as perfluoroalkyl sulfonamide–based and fluorotelomer sulfonamide–based compounds, dimers, fluorotelomer betaines, and unsaturated perfluoroalkyl sulfonic acids. Mass balance analysis based on semiquantitative NTS (qNTS) data revealed near-complete conversion of PFAS precursors in both standards and contaminated soil. Additionally, transformation kinetics were investigated, providing insight into the behavior and persistence of PFAS precursors during PhotoTOP treatment and their potential fate in the environment. Graphical abstract
- 11 November 2025
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 418 (12) , 3555-3565
Open AccessCharacterization of per- and polyfluoroalkyl substances (PFAS) in AFFF-contaminated soil by photocatalytic oxidation (PhotoTOP)
Per- and polyfluoroalkyl substances (PFAS) comprise a diverse group of thousands of compounds, for which only a limited number of analytical reference standards are available. This presents significant challenges for the identification and quantification of PFAS in environmental samples. The PhotoTOP assay addresses this issue by photocatalytic oxidation of PFAS precursors into quantifiable perfluoroalkyl carboxylic acids. In this study, the PhotoTOP was applied for the first time to both aqueous film-forming foam (AFFF)–related PFAS standards and AFFF-contaminated soil. Precursors, intermediates, and final oxidation products were identified using target analysis and non-target screening (NTS). Numerous novel PhotoTOP intermediates were detected, such as perfluoroalkyl sulfonamide–based and fluorotelomer sulfonamide–based compounds, dimers, fluorotelomer betaines, and unsaturated perfluoroalkyl sulfonic acids. Mass balance analysis based on semiquantitative NTS (qNTS) data revealed near-complete conversion of PFAS precursors in both standards and contaminated soil. Additionally, transformation kinetics were investigated, providing insight into the behavior and persistence of PFAS precursors during PhotoTOP treatment and their potential fate in the environment. Graphical abstract
- Open Access
- 6 August 2025
- Published by Elsevier in Environment International
- Vol. 202, 109714
Unveiling novel and legacy PFAS in human hair
- 6 August 2025
- Published by Elsevier in Environment International
- Vol. 202, 109714
Open AccessUnveiling novel and legacy PFAS in human hair
- Open Access
- 3 April 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (14) , 7338-7347
Implementation of Matrix-Matched Semiquantification of PFAS in AFFF-Contaminated Soil
This study presents a novel semiquantification approach for nontarget screening (NTS), combining matrix-matched calibration and ionization class-specific average calibration curves (ACCs) to address the lack of analytical reference standards for most per- and polyfluoroalkyl substances (PFAS). Ionization class-specific ACCs for carboxylic and sulfonic acids, sulfonamides, and cationic PFAS result in high accuracy, with median absolute accuracy quotients below 2.27×. The approach was applied to soil impacted by aqueous film-forming foam (AFFF) contamination. A total of 96 tentatively identified PFAS were semiquantified in addition to 28 quantified compounds based on available standards. Semiquantified concentrations exceeded those of target analytes, demonstrating the critical role of this method in capturing broader PFAS contamination. In this case, validation against extractable organofluorine (EOF) showed a 102% closed mass balance. The innovative approach not only enables comprehensive PFAS contamination assessment in complex matrices but also expands the scope of the NTS for environmental monitoring, remediation, and risk assessment of AFFF-contaminated sites.
- 3 April 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (14) , 7338-7347
Open AccessImplementation of Matrix-Matched Semiquantification of PFAS in AFFF-Contaminated Soil
This study presents a novel semiquantification approach for nontarget screening (NTS), combining matrix-matched calibration and ionization class-specific average calibration curves (ACCs) to address the lack of analytical reference standards for most per- and polyfluoroalkyl substances (PFAS). Ionization class-specific ACCs for carboxylic and sulfonic acids, sulfonamides, and cationic PFAS result in high accuracy, with median absolute accuracy quotients below 2.27×. The approach was applied to soil impacted by aqueous film-forming foam (AFFF) contamination. A total of 96 tentatively identified PFAS were semiquantified in addition to 28 quantified compounds based on available standards. Semiquantified concentrations exceeded those of target analytes, demonstrating the critical role of this method in capturing broader PFAS contamination. In this case, validation against extractable organofluorine (EOF) showed a 102% closed mass balance. The innovative approach not only enables comprehensive PFAS contamination assessment in complex matrices but also expands the scope of the NTS for environmental monitoring, remediation, and risk assessment of AFFF-contaminated sites.
- Open Access
- 28 February 2025
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 490, 137798
Assessment of PFAS contamination in agricultural soils: Non-target identification of precursors, fluorine mass balance and microcosm studies
- 28 February 2025
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 490, 137798
Open AccessAssessment of PFAS contamination in agricultural soils: Non-target identification of precursors, fluorine mass balance and microcosm studies
- Open Access
- 28 October 2024
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 417 (27) , 6049-6064
Non-target screening reveals 124 PFAS at an AFFF-impacted field site in Germany specified by novel systematic terminology
The uncontrolled release of aqueous film-forming foam (AFFF) ingredients during a major fire incident in Reilingen, Germany, in 2008 led to significant soil and groundwater contamination. As the identity of fluorochemical surfactants in AFFF are often veiled due to company secrets, it is important to characterize AFFF contaminations and their impact on the environment comprehensively. In this study, we adapted a systematic approach combining a suitable extraction method with liquid chromatography high-resolution quadrupole time-of-flight mass spectrometry (LC-QTOF-MS) for an extensive non-targeted analysis. Our analysis identified 124 per- and polyfluoroalkyl substances (PFAS) from 42 subclasses in the contaminated soil (confidence levels of identification between 1 and 3). Typical for AFFF-impacted field sites, these included anionic, cationic, and zwitterionic substances with perfluoroalkyl chains spanning from 3 to 14 carbon atoms. Furthermore, we identified 1 previously unreported substance, and detected 9 PFAS subclasses for the first time in soil. AFFFs have long been employed to extinguish large hydrocarbon fires, yet their environmental consequences remain a concern. This study sheds light on the complex composition of AFFFs at this particularly contaminated area, emphasizing the necessity for extensive contaminant characterization as sound basis for informed management strategies to mitigate their adverse effects. AFFF PFAS are often named differently in the literature, leading to inconsistency in terminology. To address this issue, we introduced partially new terminology for AFFF-related PFAS to establish consistent terminology, to facilitate communication of identified compounds, and to ensure that the chemical structure can be directly derived from acronyms. Graphical Abstract
- 28 October 2024
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 417 (27) , 6049-6064
Open AccessNon-target screening reveals 124 PFAS at an AFFF-impacted field site in Germany specified by novel systematic terminology
The uncontrolled release of aqueous film-forming foam (AFFF) ingredients during a major fire incident in Reilingen, Germany, in 2008 led to significant soil and groundwater contamination. As the identity of fluorochemical surfactants in AFFF are often veiled due to company secrets, it is important to characterize AFFF contaminations and their impact on the environment comprehensively. In this study, we adapted a systematic approach combining a suitable extraction method with liquid chromatography high-resolution quadrupole time-of-flight mass spectrometry (LC-QTOF-MS) for an extensive non-targeted analysis. Our analysis identified 124 per- and polyfluoroalkyl substances (PFAS) from 42 subclasses in the contaminated soil (confidence levels of identification between 1 and 3). Typical for AFFF-impacted field sites, these included anionic, cationic, and zwitterionic substances with perfluoroalkyl chains spanning from 3 to 14 carbon atoms. Furthermore, we identified 1 previously unreported substance, and detected 9 PFAS subclasses for the first time in soil. AFFFs have long been employed to extinguish large hydrocarbon fires, yet their environmental consequences remain a concern. This study sheds light on the complex composition of AFFFs at this particularly contaminated area, emphasizing the necessity for extensive contaminant characterization as sound basis for informed management strategies to mitigate their adverse effects. AFFF PFAS are often named differently in the literature, leading to inconsistency in terminology. To address this issue, we introduced partially new terminology for AFFF-related PFAS to establish consistent terminology, to facilitate communication of identified compounds, and to ensure that the chemical structure can be directly derived from acronyms. Graphical Abstract