Haobin Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Haobin Hu has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
Yun Wu
College of Petroleum & Chemical Engineering Longdong University Qingyang China
12 shared publicationsJiao Sun
College of Food Science and Engineering Gansu Agricultural University Lanzhou 730070 P. R. China
5 shared publicationsHaipeng Liang
Department of Oncology Qingyang First People's Hospital Qingyang China
4 shared publicationsHong Cao
College of Chemistry and Chemical Engineering, Longdong University
3 shared publicationsHuaisheng Hu
College of Chemistry & Chemical Engineering, Longdong University, Qingyang, Gansu 745000, PR China
3 shared publicationsXu-Dong Zheng
College of Chemistry and Chemical Engineering, Longdong University
3 shared publications
Latest Publications
- 4 February 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 214
Efficient photocatalytic H2 evolution over sulfoselenide CuS0.5Se0.5/g-C3N4 S-scheme heterojunction
- 4 February 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 214
Efficient photocatalytic H2 evolution over sulfoselenide CuS0.5Se0.5/g-C3N4 S-scheme heterojunction
- 14 January 2026
- Published by Wiley in Chemistry & Biodiversity
- Vol. 23 (1) , e02545
Selenized Polysaccharides From Acanthopanax leucorrhizus : Synthesis, Characterization, and Cytotoxicity
Selenylation modification has been extensively developed as a method to enhance the biological effects of natural polysaccharides. In this study, a novel water‐soluble polysaccharide, designated as ALPS‐41, was isolated from the stem bark of A. leucorrhizus and subsequently selenized to form Se‐ALPS‐41, using the HNO 3 –Na 2 SeO 3 method. The physicochemical properties and structural features of both ALPS‐41 and Se‐ALPS‐41 were thoroughly characterized, using UV, Fourier transform infrared (FT‐IR), high‐performance gel‐permeation chromatography (HPGPC), HPLC, scanning electron microscopy (SEM), X‐ray diffraction (XRD), and NMR analyses. In vitro cytotoxicity was evaluated via Cell Counting Kit‐8 (CCK‐8) assays against human MCF‐7, HeLa, HepG2, and HEK293 cell lines. Chemical composition analysis revealed that the homogeneous ALPS‐41 had an average molecular weight of 437 kDa and was composed of glucose, galactose, and mannose in a molar ratio of 2.21:1.58:1.00. The selenium content and molecular weight of Se‐ALPS‐41 were determined to be 87.56 mg/g and 298 kDa, respectively. Cytotoxicity tests demonstrated that Se‐ALPS‐41 decreased the viability of MCF‐7 and HepG2 cells in a concentration‐dependent manner, while exhibiting no cytotoxic effect on HeLa and normal HEK293 cells. These findings suggest that selenium‐modified polysaccharides derived from A. leucorrhizus may serve as a potential selenium source with antitumor properties.
- 14 January 2026
- Published by Wiley in Chemistry & Biodiversity
- Vol. 23 (1) , e02545
Selenized Polysaccharides From Acanthopanax leucorrhizus : Synthesis, Characterization, and Cytotoxicity
Selenylation modification has been extensively developed as a method to enhance the biological effects of natural polysaccharides. In this study, a novel water‐soluble polysaccharide, designated as ALPS‐41, was isolated from the stem bark of A. leucorrhizus and subsequently selenized to form Se‐ALPS‐41, using the HNO 3 –Na 2 SeO 3 method. The physicochemical properties and structural features of both ALPS‐41 and Se‐ALPS‐41 were thoroughly characterized, using UV, Fourier transform infrared (FT‐IR), high‐performance gel‐permeation chromatography (HPGPC), HPLC, scanning electron microscopy (SEM), X‐ray diffraction (XRD), and NMR analyses. In vitro cytotoxicity was evaluated via Cell Counting Kit‐8 (CCK‐8) assays against human MCF‐7, HeLa, HepG2, and HEK293 cell lines. Chemical composition analysis revealed that the homogeneous ALPS‐41 had an average molecular weight of 437 kDa and was composed of glucose, galactose, and mannose in a molar ratio of 2.21:1.58:1.00. The selenium content and molecular weight of Se‐ALPS‐41 were determined to be 87.56 mg/g and 298 kDa, respectively. Cytotoxicity tests demonstrated that Se‐ALPS‐41 decreased the viability of MCF‐7 and HepG2 cells in a concentration‐dependent manner, while exhibiting no cytotoxic effect on HeLa and normal HEK293 cells. These findings suggest that selenium‐modified polysaccharides derived from A. leucorrhizus may serve as a potential selenium source with antitumor properties.
- 14 November 2024
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 10 (3) , 667-675
Effect of the presence of CO2 on the stability of the methanol-to-olefins reaction catalyzed by Zn/SAPO-34 zeolite
The methanol-to-olefins reaction is a viable and promising technological route to replace increasingly scarce petroleum resources. SAPO-34 zeolite is an ideal catalyst for the methanol-to-olefins reaction due to its suitable acidity and pore structure. However, a single zeolite catalyst has limited performance, and in this work, metal species were introduced on SAPO-34 molecular sieves to achieve higher low-carbon olefin selectivity through the modulation of acidity. However, since the introduction of metals promotes aromatic cycling, it allows the creation of carbonaceous precursors and reduces the catalyst lifetime. Therefore, the introduction of CO2 into the carrier gas inhibited the generation of carbonaceous precursors and thus prolonged the catalyst life. The presence of the metal species and their effects on SAPO-34's pores and structure were characterized by XPS, the change in acid amount was determined by NH3-TPD, and the adsorption strength of the catalyst for CO2 was determined by CO2-TPD, revealing the active sites of the catalyst. High low-carbon olefin selectivity and long catalyst life were also achieved, with low-carbon olefin selectivity of 88.0%.
- 14 November 2024
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 10 (3) , 667-675
Effect of the presence of CO2 on the stability of the methanol-to-olefins reaction catalyzed by Zn/SAPO-34 zeolite
The methanol-to-olefins reaction is a viable and promising technological route to replace increasingly scarce petroleum resources. SAPO-34 zeolite is an ideal catalyst for the methanol-to-olefins reaction due to its suitable acidity and pore structure. However, a single zeolite catalyst has limited performance, and in this work, metal species were introduced on SAPO-34 molecular sieves to achieve higher low-carbon olefin selectivity through the modulation of acidity. However, since the introduction of metals promotes aromatic cycling, it allows the creation of carbonaceous precursors and reduces the catalyst lifetime. Therefore, the introduction of CO2 into the carrier gas inhibited the generation of carbonaceous precursors and thus prolonged the catalyst life. The presence of the metal species and their effects on SAPO-34's pores and structure were characterized by XPS, the change in acid amount was determined by NH3-TPD, and the adsorption strength of the catalyst for CO2 was determined by CO2-TPD, revealing the active sites of the catalyst. High low-carbon olefin selectivity and long catalyst life were also achieved, with low-carbon olefin selectivity of 88.0%.
- Open Access
Preparation of Composites Derived from Modified Loess/Chitosan and Its Adsorption Performance for Methyl Orange
A modified loess/chitosan composite (ML@CS) was prepared via solution. The microstructure and physicochemical properties of ML@CS were characterised via scanning electron microscope (SEM), Zeta potential, X-ray diffraction (XRD), Fourier transform infrared spectrum (FT-IR), and thermogravimetric analysis (TGA). An aqueous solution of methyl orange (MO) was used as simulated wastewater from which the influence of the initial concentration and pH of MO, the dosage amount and regeneration performance of ML@CS, adsorption temperature, and time on the adsorption effect of MO were systematically investigated. The adsorption kinetics, isothermal adsorption, and adsorption mechanism were also analysed. The results indicate that ML@CS had a good adsorption effect on MO. When the initial concentration of MO was 200 mg/L, pH was 5.0, and ML@CS dosage was 1.0 g/L, the adsorption equilibrium could be reached within 180 min at room temperature, and the equilibrium adsorption capacity and removal rate reached 199.52 mg/g and 99.75%, respectively. After five adsorption–desorption cycles, the MO removal rate remained above 82%. The adsorption behaviour of ML@CS for MO conforms to the pseudo–second–order kinetic model and the Langmuir isotherm adsorption model. The spontaneous exothermic process was mainly controlled by monolayer chemical adsorption and the physical adsorption only played an auxiliary role. ML@CS efficiently adsorbed MO in water and can be used as a high-efficiency, low-cost adsorbent for printing and dyeing wastewater treatment.
Open AccessPreparation of Composites Derived from Modified Loess/Chitosan and Its Adsorption Performance for Methyl Orange
A modified loess/chitosan composite (ML@CS) was prepared via solution. The microstructure and physicochemical properties of ML@CS were characterised via scanning electron microscope (SEM), Zeta potential, X-ray diffraction (XRD), Fourier transform infrared spectrum (FT-IR), and thermogravimetric analysis (TGA). An aqueous solution of methyl orange (MO) was used as simulated wastewater from which the influence of the initial concentration and pH of MO, the dosage amount and regeneration performance of ML@CS, adsorption temperature, and time on the adsorption effect of MO were systematically investigated. The adsorption kinetics, isothermal adsorption, and adsorption mechanism were also analysed. The results indicate that ML@CS had a good adsorption effect on MO. When the initial concentration of MO was 200 mg/L, pH was 5.0, and ML@CS dosage was 1.0 g/L, the adsorption equilibrium could be reached within 180 min at room temperature, and the equilibrium adsorption capacity and removal rate reached 199.52 mg/g and 99.75%, respectively. After five adsorption–desorption cycles, the MO removal rate remained above 82%. The adsorption behaviour of ML@CS for MO conforms to the pseudo–second–order kinetic model and the Langmuir isotherm adsorption model. The spontaneous exothermic process was mainly controlled by monolayer chemical adsorption and the physical adsorption only played an auxiliary role. ML@CS efficiently adsorbed MO in water and can be used as a high-efficiency, low-cost adsorbent for printing and dyeing wastewater treatment.
- Open Access
Cross-Linked Networks of 1,6-Hexanedithiol with Gold Nanoparticles to Improve Permeation Flux of Polyethersulfone Membrane
It is a great challenge to design and prepare polymeric membranes with excellent permeability and good rejection. In this study, a modifier of gold nanoparticles for crosslinking and self-assembly by 1,6-hexanedithiol is fabricated and used to modify the polyethersulfone membrane as an additive, which forms a uniform porous membrane by liquid–liquid phase conversion technology. The morphology of the membrane is investigated by scanning electron microscopy (SEM), the change of the hydrophilicity of the membrane surface after modification is measured by the contact angle goniometer, and the performance of the fabricated membrane is measured by evaluating the pure water flux and the rejection ratio of bovine serum albumin. The results indicate that the permeability of the modified membrane has a significant improvement. When the mass fraction of the modifying agent is 5 wt%, the water flux of the modified membrane reaches up to 131.6 L m−2 h−1, and has a good rejection ratio to bovine serum albumin. In short, this work plays an important role in improving the flux of the membrane and maintaining good separation performance.
Open AccessCross-Linked Networks of 1,6-Hexanedithiol with Gold Nanoparticles to Improve Permeation Flux of Polyethersulfone Membrane
It is a great challenge to design and prepare polymeric membranes with excellent permeability and good rejection. In this study, a modifier of gold nanoparticles for crosslinking and self-assembly by 1,6-hexanedithiol is fabricated and used to modify the polyethersulfone membrane as an additive, which forms a uniform porous membrane by liquid–liquid phase conversion technology. The morphology of the membrane is investigated by scanning electron microscopy (SEM), the change of the hydrophilicity of the membrane surface after modification is measured by the contact angle goniometer, and the performance of the fabricated membrane is measured by evaluating the pure water flux and the rejection ratio of bovine serum albumin. The results indicate that the permeability of the modified membrane has a significant improvement. When the mass fraction of the modifying agent is 5 wt%, the water flux of the modified membrane reaches up to 131.6 L m−2 h−1, and has a good rejection ratio to bovine serum albumin. In short, this work plays an important role in improving the flux of the membrane and maintaining good separation performance.
- 4 July 2022
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 7 (10) , 2152-2162
Effect of acid distribution and pore structure of ZSM-5 on catalytic performance
Zeolite with crystal intracrystalline pore structure with less acid on the outer surface.
- 4 July 2022
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 7 (10) , 2152-2162
Effect of acid distribution and pore structure of ZSM-5 on catalytic performance
Zeolite with crystal intracrystalline pore structure with less acid on the outer surface.
- 13 April 2021
- Published by Wiley in Chemistry & Biodiversity
- Vol. 18 (6) , e2000947
Ultrasound‐Assisted Extraction of Water‐Soluble Polysaccharides from the Fruit of Acanthopanaxbrachypus: Physicochemical, Structural and Functional Properties
The ultrasound‐assisted extraction (UAE) parameters of total water‐soluble polysaccharides (TABPs) from Acanthopanaxbrachypus fruit were optimized by Box‐Behnken design (BBD) and response surface methodology (RSM). Physicochemical, structural, and functional properties of TABPs were investigated by chemical analysis, inductively coupled plasma optical emission spectrometry (ICP‐OES), high performance liquid chromatography (HPLC), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT‐IR), thermogravimetric analysis (TGA), water‐holding capacity (WHC), oil‐holding capacity (OHC), emulsion capacity (EC), emulsion stability (ES), as well as DPPH. and ABTS.+scavenging assays. The results showed that the maximal UAE‐yield of TABPs was 3.81±0.18 % under the optimal conditions (ultrasonic power 325 W, extraction temperature 47 °C, extraction time 22 min). TABPs was rich in some beneficial element (Mg, K, Fe, Zn and Na) but little in harmful elements (Hg, Cd, As and Pb), and displayed rough surface with flake‐like features and large dents, contained 93.89±0.08 % of total carbohydrate with more different monosaccharides including glucose, galactose, rhamnose, arabinose, mannose, xylose, and uronic acid in a molar ratio of 8.83 : 7.90 : 4.74 : 4.55 : 2.80 : 2.39 : 1.00, respectively. TABPs exhibited broad weight distribution (11.2–133.5 kDa), excellent thermal stability (>280 °C), WHC (0.61±0.08 g water/g sample) and OHC (4.53±0.12 g oil/g sample), as well as higher EC (43.75±1.23 %) and ES (38.32±1.50 %). Furthermore, TABPs also displayed remarkable scavenging activities on DPPH. and ABTS.+ in vitro. These findings provide a scientific basis for the applications of TABPs in functional additives for food, medicine, and cosmetics.
- 13 April 2021
- Published by Wiley in Chemistry & Biodiversity
- Vol. 18 (6) , e2000947
Ultrasound‐Assisted Extraction of Water‐Soluble Polysaccharides from the Fruit of Acanthopanaxbrachypus: Physicochemical, Structural and Functional Properties
The ultrasound‐assisted extraction (UAE) parameters of total water‐soluble polysaccharides (TABPs) from Acanthopanaxbrachypus fruit were optimized by Box‐Behnken design (BBD) and response surface methodology (RSM). Physicochemical, structural, and functional properties of TABPs were investigated by chemical analysis, inductively coupled plasma optical emission spectrometry (ICP‐OES), high performance liquid chromatography (HPLC), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT‐IR), thermogravimetric analysis (TGA), water‐holding capacity (WHC), oil‐holding capacity (OHC), emulsion capacity (EC), emulsion stability (ES), as well as DPPH. and ABTS.+scavenging assays. The results showed that the maximal UAE‐yield of TABPs was 3.81±0.18 % under the optimal conditions (ultrasonic power 325 W, extraction temperature 47 °C, extraction time 22 min). TABPs was rich in some beneficial element (Mg, K, Fe, Zn and Na) but little in harmful elements (Hg, Cd, As and Pb), and displayed rough surface with flake‐like features and large dents, contained 93.89±0.08 % of total carbohydrate with more different monosaccharides including glucose, galactose, rhamnose, arabinose, mannose, xylose, and uronic acid in a molar ratio of 8.83 : 7.90 : 4.74 : 4.55 : 2.80 : 2.39 : 1.00, respectively. TABPs exhibited broad weight distribution (11.2–133.5 kDa), excellent thermal stability (>280 °C), WHC (0.61±0.08 g water/g sample) and OHC (4.53±0.12 g oil/g sample), as well as higher EC (43.75±1.23 %) and ES (38.32±1.50 %). Furthermore, TABPs also displayed remarkable scavenging activities on DPPH. and ABTS.+ in vitro. These findings provide a scientific basis for the applications of TABPs in functional additives for food, medicine, and cosmetics.
- 1 January 2020
- Published by Elsevier in Carbohydrate Research
- Vol. 487, 107890
Chemical modification and antioxidant activity of the polysaccharide from Acanthopanax leucorrhizus
- 1 January 2020
- Published by Elsevier in Carbohydrate Research
- Vol. 487, 107890
Chemical modification and antioxidant activity of the polysaccharide from Acanthopanax leucorrhizus
- 1 September 2018
- Published by Elsevier in Carbohydrate Polymers
- Vol. 196, 359-367
Isolation, purification, characterization and antioxidant activity of polysaccharides from the stem barks of Acanthopanax leucorrhizus
- 1 September 2018
- Published by Elsevier in Carbohydrate Polymers
- Vol. 196, 359-367
Isolation, purification, characterization and antioxidant activity of polysaccharides from the stem barks of Acanthopanax leucorrhizus
- 1 January 2018
- Published by Elsevier in Fitoterapia
- Vol. 124, 167-176
Isolation, modification and cytotoxic evaluation of stilbenoids from Acanthopanax leucorrhizus
- 1 January 2018
- Published by Elsevier in Fitoterapia
- Vol. 124, 167-176
Isolation, modification and cytotoxic evaluation of stilbenoids from Acanthopanax leucorrhizus