Aeron Tynes Hammack
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Aeron Tynes Hammack has a total of 87 co-authors. Here are the top co-authors by number of shared publications:
A. C. Gossard
Materials Department, University of California at Santa Barbara, Santa Barbara, California 93106-5050, USA
17 shared publicationsL. V. Butov
Department of Physics, University of California at San Diego, La Jolla, California 92093-0319, USA
16 shared publicationsM. Hanson
Materials Department, University of California at Santa Barbara, Santa Barbara, California 93106-5050, USA
9 shared publicationsA. A. High
Department of Physics, University of California at San Diego, La Jolla, California 92093-0319, USA
6 shared publicationsA. L. Ivanov
Department of Physics and Astronomy, Cardiff University, Cardiff CF24 3AA, United Kingdom
6 shared publicationsSen Yang
Department of Physics, University of California at San Diego, La Jolla, California 92093-0319, USA
6 shared publications
Latest Publications
- Open Access
- 30 January 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
High-throughput methods leveraging robotics and computer vision for the development of therapeutic phage cocktails
We present the high-throughput automated screening techniques that are being used to develop bacteriophage-based therapeutic products currently under investigation in human clinical trials to combat urinary tract infections 1 . By integrating modern liquid handling robotics, standardized phenotypic assays, and computer vision-based enumeration, we established a platform capable of reproducibly screening large collections of phages against clinically derived bacterial strain panels. This approach enabled systematic assessment of phage-bacteria interactions at scale, facilitating the identification and optimization of phage cocktails with broad in vitro activity. Although bacteriophage therapy has long been investigated as a strategy for treating bacterial infections, few frameworks exist for developing phage combinations in a reproducible and scalable manner. The methods outlined here address this gap and aim to support the broader development of therapeutic assets available to combat antibiotic resistance.
- 30 January 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessHigh-throughput methods leveraging robotics and computer vision for the development of therapeutic phage cocktails
We present the high-throughput automated screening techniques that are being used to develop bacteriophage-based therapeutic products currently under investigation in human clinical trials to combat urinary tract infections 1 . By integrating modern liquid handling robotics, standardized phenotypic assays, and computer vision-based enumeration, we established a platform capable of reproducibly screening large collections of phages against clinically derived bacterial strain panels. This approach enabled systematic assessment of phage-bacteria interactions at scale, facilitating the identification and optimization of phage cocktails with broad in vitro activity. Although bacteriophage therapy has long been investigated as a strategy for treating bacterial infections, few frameworks exist for developing phage combinations in a reproducible and scalable manner. The methods outlined here address this gap and aim to support the broader development of therapeutic assets available to combat antibiotic resistance.
- Open Access
A Novel Approach for Accurate Sequence Assembly Using de Bruijn graphs
Sequence assembly methods are valuable for reconstructing genomes from shorter read fragments. Modern nucleic acid sequencing instruments produce quality scores associated with each reported base; however, these quality scores are not generally used as a core part of sequence assembly or alignment algorithms. Here, we leverage weighted de Bruijn graphs as graphical probability models representing the relative abundances and qualities of kmers within FASTQ-encoded observations. We then utilize these weighted de Bruijn graphs to identify alternate, higher-likelihood candidate sequences compared to the original observations, which are known to contain errors. By improving the original observations with these resampled paths, iteratively across increasing k-lengths, we can use this expectation-maximization approach to “polish” read sets from any sequencing technology according to the mutual information shared in the reads. We use this polishing approach to probabilistically correct simulated short- and long-read datasets of lower coverages and higher error rates than some algorithms can produce satisfactory assemblies for. We find that this approach corrects sequencing errors at rates that are able to produce error-free and nearly-error-free de Bruijn assembly graphs for simulated read-set challenges.
Open AccessA Novel Approach for Accurate Sequence Assembly Using de Bruijn graphs
Sequence assembly methods are valuable for reconstructing genomes from shorter read fragments. Modern nucleic acid sequencing instruments produce quality scores associated with each reported base; however, these quality scores are not generally used as a core part of sequence assembly or alignment algorithms. Here, we leverage weighted de Bruijn graphs as graphical probability models representing the relative abundances and qualities of kmers within FASTQ-encoded observations. We then utilize these weighted de Bruijn graphs to identify alternate, higher-likelihood candidate sequences compared to the original observations, which are known to contain errors. By improving the original observations with these resampled paths, iteratively across increasing k-lengths, we can use this expectation-maximization approach to “polish” read sets from any sequencing technology according to the mutual information shared in the reads. We use this polishing approach to probabilistically correct simulated short- and long-read datasets of lower coverages and higher error rates than some algorithms can produce satisfactory assemblies for. We find that this approach corrects sequencing errors at rates that are able to produce error-free and nearly-error-free de Bruijn assembly graphs for simulated read-set challenges.
- 6 December 2023
- Published by Springer Nature in Nature Reviews Microbiology
- Vol. 22 (2) , 63
Machine learning sheds light on microbial dark proteins
- 6 December 2023
- Published by Springer Nature in Nature Reviews Microbiology
- Vol. 22 (2) , 63
Machine learning sheds light on microbial dark proteins
- Open Access
- 1 December 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 132 (21)
Metal–ceramic composite structures for fabrication of high power density plasmonic devices
The recent decade brought many advances to plasmonics, but high power density plasmonic antennas designed to behave as heaters or operate in high temperature environments are still facing material stability challenges preventing their ultimate use. Gold has been the optimal choice among plasmonic materials but experiences morphology changes at temperature that result in device efficiency reduction and failure. Bulk titanium nitride has been explored as a solution but has deal-breaking tradeoffs in device quality factor. In this paper, we explore via proof-of-concept the use of a metal–ceramic composite structure to determine whether a bulk Au nanorod can provide strong plasmonic resonances while coated with an ultrathin conformal layer of titanium nitride or silica to provide morphological stability and sufficient plasmonic activity without excessive resonance quality degradation. We show SEM-level morphological stability for temperatures up to 500 °C with coatings below 4 nm. Computer modeling suggests the ultrathin titanium nitride has detrimental effects on the strong plasmonic resonances of a Au nanorod. We then looked into other possible coatings for solutions to stabilize high power density plasmonic antennas including plasmonic oxides, metal adhesion layers, and silica, the latter appearing to be the best option while lowering the overall peak electric field intensity, the silica increases the electric field intensity at its boundary.
- 1 December 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 132 (21)
Open AccessMetal–ceramic composite structures for fabrication of high power density plasmonic devices
The recent decade brought many advances to plasmonics, but high power density plasmonic antennas designed to behave as heaters or operate in high temperature environments are still facing material stability challenges preventing their ultimate use. Gold has been the optimal choice among plasmonic materials but experiences morphology changes at temperature that result in device efficiency reduction and failure. Bulk titanium nitride has been explored as a solution but has deal-breaking tradeoffs in device quality factor. In this paper, we explore via proof-of-concept the use of a metal–ceramic composite structure to determine whether a bulk Au nanorod can provide strong plasmonic resonances while coated with an ultrathin conformal layer of titanium nitride or silica to provide morphological stability and sufficient plasmonic activity without excessive resonance quality degradation. We show SEM-level morphological stability for temperatures up to 500 °C with coatings below 4 nm. Computer modeling suggests the ultrathin titanium nitride has detrimental effects on the strong plasmonic resonances of a Au nanorod. We then looked into other possible coatings for solutions to stabilize high power density plasmonic antennas including plasmonic oxides, metal adhesion layers, and silica, the latter appearing to be the best option while lowering the overall peak electric field intensity, the silica increases the electric field intensity at its boundary.
- 12 July 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 130 (2) , 024506
Simultaneous multimethod scanning probe microscopy of complex nano-systems
In the twenty-first century, scanning probe microscopy characterization techniques have seen significant progress and are capable of probing complex structures and devices for a variety of near-surface features and phenomena with nanometer scale resolution. With modest customization, we can deploy these techniques for industrial metrology purposes in a simultaneous and multimethod system capable of shedding light on device function and failure modes, as well as determining the most efficient methods for data collection. To demonstrate this concept with a current, complex industrial device under development, several scanning probe microscopy techniques advantageous to the progress of heat-assisted magnetic recording heads were selected. This work describes simultaneous and multimethod approaches for performing heat-assisted magnetic recording head characterization using atomic force microscopy with scattering scanning near-field optical microscopy simultaneously performed with magnetic force microscopy or photo-induced force microscopy that could be extended to applications of other complex nanoscale devices. We demonstrate that the optical and magnetic fields are overlapping for fabricated heads, which is necessary for performing heat-assisted magnetic recording. We also observed that the multimethod atomic force microscopy methods show strong agreement between the measured optical and magnetic fields and the locale of their associated parts on the head.
- 12 July 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 130 (2) , 024506
Simultaneous multimethod scanning probe microscopy of complex nano-systems
In the twenty-first century, scanning probe microscopy characterization techniques have seen significant progress and are capable of probing complex structures and devices for a variety of near-surface features and phenomena with nanometer scale resolution. With modest customization, we can deploy these techniques for industrial metrology purposes in a simultaneous and multimethod system capable of shedding light on device function and failure modes, as well as determining the most efficient methods for data collection. To demonstrate this concept with a current, complex industrial device under development, several scanning probe microscopy techniques advantageous to the progress of heat-assisted magnetic recording heads were selected. This work describes simultaneous and multimethod approaches for performing heat-assisted magnetic recording head characterization using atomic force microscopy with scattering scanning near-field optical microscopy simultaneously performed with magnetic force microscopy or photo-induced force microscopy that could be extended to applications of other complex nanoscale devices. We demonstrate that the optical and magnetic fields are overlapping for fabricated heads, which is necessary for performing heat-assisted magnetic recording. We also observed that the multimethod atomic force microscopy methods show strong agreement between the measured optical and magnetic fields and the locale of their associated parts on the head.
- 14 May 2018
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 123 (18) , 183104
Predicting scattering scanning near-field optical microscopy of mass-produced plasmonic devices
Scattering scanning near-field optical microscopy enables optical imaging and characterization of plasmonic devices with nanometer-scale resolution well below the diffraction limit. This technique enables developers to probe and understand the waveguide-coupled plasmonic antenna in as-fabricated heat-assisted magnetic recording heads. In order to validate and predict results and to extract information from experimental measurements that is physically comparable to simulations, a model was developed to translate the simulated electric field into expected near-field measurements using physical parameters specific to scattering scanning near-field optical microscopy physics. The methods used in this paper prove that scattering scanning near-field optical microscopy can be used to determine critical sub-diffraction-limited dimensions of optical field confinement, which is a crucial metrology requirement for the future of nano-optics, semiconductor photonic devices, and biological sensing where the near-field character of light is fundamental to device operation.
- 14 May 2018
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 123 (18) , 183104
Predicting scattering scanning near-field optical microscopy of mass-produced plasmonic devices
Scattering scanning near-field optical microscopy enables optical imaging and characterization of plasmonic devices with nanometer-scale resolution well below the diffraction limit. This technique enables developers to probe and understand the waveguide-coupled plasmonic antenna in as-fabricated heat-assisted magnetic recording heads. In order to validate and predict results and to extract information from experimental measurements that is physically comparable to simulations, a model was developed to translate the simulated electric field into expected near-field measurements using physical parameters specific to scattering scanning near-field optical microscopy physics. The methods used in this paper prove that scattering scanning near-field optical microscopy can be used to determine critical sub-diffraction-limited dimensions of optical field confinement, which is a crucial metrology requirement for the future of nano-optics, semiconductor photonic devices, and biological sensing where the near-field character of light is fundamental to device operation.
- Open Access
- 10 April 2018
- Published by Springer Nature in Scientific Reports
- Vol. 8 (1) , 5761
Visualizing the bidirectional optical transfer function for near-field enhancement in waveguide coupled plasmonic transducers
We report visualizations of the bidirectional near-field optical transfer function for a waveguide-coupled plasmonic transducer as a metrology technique essential for successful development for mass-fabricated near-field devices. Plasmonic devices have revolutionized the observation of nanoscale phenomena, enabling optical excitation and readout from nanoscale regions of fabricated devices instead of as limited by optical diffraction. Visualizations of the plasmonic transducer modes were acquired both by local near-field excitation of the antenna on the front facet of a waveguide using the focused electron beam of a scanning electron microscope as a probe of the near-field cathodoluminescence during far-field collection from the back facet of the waveguide, and by local mapping of the optical near-field for the same antenna design using scattering scanning near-field optical microscopy as a probe of the near-field optical mode density for far-field light focused into the back facet of the waveguide. Strong agreement between both measurement types and numerical modeling was observed, indicating that the method enables crucial metrological comparisons of as fabricated device performance to as-modeled device expectations for heat-assisted magnetic recording heads, which can be extended to successful development of future near-field-on-chip devices such as optical processor interconnects.
- 10 April 2018
- Published by Springer Nature in Scientific Reports
- Vol. 8 (1) , 5761
Open AccessVisualizing the bidirectional optical transfer function for near-field enhancement in waveguide coupled plasmonic transducers
We report visualizations of the bidirectional near-field optical transfer function for a waveguide-coupled plasmonic transducer as a metrology technique essential for successful development for mass-fabricated near-field devices. Plasmonic devices have revolutionized the observation of nanoscale phenomena, enabling optical excitation and readout from nanoscale regions of fabricated devices instead of as limited by optical diffraction. Visualizations of the plasmonic transducer modes were acquired both by local near-field excitation of the antenna on the front facet of a waveguide using the focused electron beam of a scanning electron microscope as a probe of the near-field cathodoluminescence during far-field collection from the back facet of the waveguide, and by local mapping of the optical near-field for the same antenna design using scattering scanning near-field optical microscopy as a probe of the near-field optical mode density for far-field light focused into the back facet of the waveguide. Strong agreement between both measurement types and numerical modeling was observed, indicating that the method enables crucial metrological comparisons of as fabricated device performance to as-modeled device expectations for heat-assisted magnetic recording heads, which can be extended to successful development of future near-field-on-chip devices such as optical processor interconnects.
- Open Access
Predicting Scattering Scanning Near-field Optical Microscopy of Mass-produced Plasmonic Devices
Scattering scanning near-field optical microscopy enables optical imaging and characterization of plasmonic devices with nanometer-scale resolution well below the diffraction limit. This technique enables developers to probe and understand the waveguide-coupled plasmonic antenna in as-fabricated heat-assisted magnetic recording heads. In order validate and predict results and to extract information from experimental measurements that is physically comparable to simulations, a model was developed to translate the simulated electric field into expected near-field measurements using physical parameters specific to scattering scanning near-field optical microscopy physics. The methods used in this paper prove that scattering scanning near-field optical microscopy can be used to determine critical sub-diffraction-limited dimensions of optical field confinement, which is a crucial metrology requirement for the future of nano-optics, semiconductor photonic devices, and biological sensing where the near-field character of light is fundamental to device operation.
Open AccessPredicting Scattering Scanning Near-field Optical Microscopy of Mass-produced Plasmonic Devices
Scattering scanning near-field optical microscopy enables optical imaging and characterization of plasmonic devices with nanometer-scale resolution well below the diffraction limit. This technique enables developers to probe and understand the waveguide-coupled plasmonic antenna in as-fabricated heat-assisted magnetic recording heads. In order validate and predict results and to extract information from experimental measurements that is physically comparable to simulations, a model was developed to translate the simulated electric field into expected near-field measurements using physical parameters specific to scattering scanning near-field optical microscopy physics. The methods used in this paper prove that scattering scanning near-field optical microscopy can be used to determine critical sub-diffraction-limited dimensions of optical field confinement, which is a crucial metrology requirement for the future of nano-optics, semiconductor photonic devices, and biological sensing where the near-field character of light is fundamental to device operation.
- 1 January 2018
- Published by Optica Publishing Group
- p. FM3H.3
Pancharatnam-Berry Phase in a Condensate of Indirect Excitons
We report on the observation of the Pancharatnam-Berry phase in a condensate of indirect excitons realized in a GaAs coupled quantum well structure. Our measurements indicate long range coherent spin transport.
- 1 January 2018
- Published by Optica Publishing Group
- p. FM3H.3
Pancharatnam-Berry Phase in a Condensate of Indirect Excitons
We report on the observation of the Pancharatnam-Berry phase in a condensate of indirect excitons realized in a GaAs coupled quantum well structure. Our measurements indicate long range coherent spin transport.
- 17 September 2013
- Published by American Physical Society (APS) in Physical Review B
- Vol. 88 (12) , 125307
Pattern formation in the exciton inner ring
We report on the two-beam study of indirect excitons in the inner ring in the exciton emission pattern. One laser beam generates the inner ring and a second weaker beam is positioned in the inner ring. The beam positioned in the inner ring is found to locally suppress the exciton emission intensity. We also report on the inner ring fragmentation and formation of multiple rings in the inner ring region. These features are found to originate from a weak spatial modulation of the excitation beam intensity in the inner ring region. The modulation of exciton emission intensity anticorrelates with the modulation of the laser excitation intensity. The three phenomena—inner ring fragmentation, formation of multiple rings in the inner ring region, and emission suppression by a weak laser beam in the inner ring—have a common feature: a reduction of exciton emission intensity in the region of enhanced laser excitation. This effect is explained in terms of exciton transport and thermalization.
- 17 September 2013
- Published by American Physical Society (APS) in Physical Review B
- Vol. 88 (12) , 125307
Pattern formation in the exciton inner ring
We report on the two-beam study of indirect excitons in the inner ring in the exciton emission pattern. One laser beam generates the inner ring and a second weaker beam is positioned in the inner ring. The beam positioned in the inner ring is found to locally suppress the exciton emission intensity. We also report on the inner ring fragmentation and formation of multiple rings in the inner ring region. These features are found to originate from a weak spatial modulation of the excitation beam intensity in the inner ring region. The modulation of exciton emission intensity anticorrelates with the modulation of the laser excitation intensity. The three phenomena—inner ring fragmentation, formation of multiple rings in the inner ring region, and emission suppression by a weak laser beam in the inner ring—have a common feature: a reduction of exciton emission intensity in the region of enhanced laser excitation. This effect is explained in terms of exciton transport and thermalization.