Bernadette Rosati
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Bernadette Rosati has a total of 207 co-authors. Here are the top co-authors by number of shared publications:
- Merete Bilde
Department of Chemistry, Aarhus University, Aarhus, Denmark
31 shared publications - Sigurd Christiansen
Department of Chemistry, Aarhus University, Aarhus, Denmark
15 shared publications - Marianne Glasius
Aarhus University
14 shared publications Andreas Massling
11 shared publications- Jonas Elm
Aarhus University (Aarhus, Denmark)
11 shared publications Henrik B. Pedersen
Department of Physics and Astronomy, Aarhus University, Aarhus C, Denmark
9 shared publications
Latest Publications
- Open Access
- 6 August 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (15) , 10997-11025
Assessing the stratospheric temperature response to volcanic sulfate injections by Mt. Pinatubo: insights from the Interactive Stratospheric Aerosol Model Intercomparison Project
Some major volcanic eruptions, such as the one of Mt. Pinatubo in 1991, can inject large amounts of sulfur dioxide (SO 2 ) into the stratosphere, leading to a volcanic aerosol cloud. This dense aerosol cloud induces a radiative heating of the stratosphere, causing ozone and water vapour changes, thereby altering middle atmospheric dynamics and chemistry. The scale of these impacts for varying injection amounts and heights on stratospheric temperature anomalies is still highly uncertain. Here we analyse specially designed chemistry-climate model experiments following the Historical Eruptions SO 2 Emission Assessment Protocol (HErSEA) under the Interactive Stratospheric Aerosol Model Intercomparison Project (ISA-MIP). The results confirm our general understanding of the stratospheric aerosol forcing due to extra SO 2 injection, while simultaneously highlighting structural differences between models. Overall, for the Pinatubo-like experiments the multi-model mean temperature anomalies agree well with meteorological reanalysis data sets, and we find that in most cases, differences between models are larger than differences for individual models across experiments with varying injection amounts and altitudes. Differences in transport, radiative transfer, and microphysics as well as the characterisation of aerosol size distributions, play a crucial role in the emergence of the spread in the modelled temperature response. Our results show further that the sensitivity of the stratospheric temperature response to model selection is also apparent in other MIPs. Hence, we argue for caution in attribution studies and the interpretation of stratospheric aerosol injection experiments relying on individual or few models.
- 6 August 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (15) , 10997-11025
Open AccessAssessing the stratospheric temperature response to volcanic sulfate injections by Mt. Pinatubo: insights from the Interactive Stratospheric Aerosol Model Intercomparison Project
Some major volcanic eruptions, such as the one of Mt. Pinatubo in 1991, can inject large amounts of sulfur dioxide (SO 2 ) into the stratosphere, leading to a volcanic aerosol cloud. This dense aerosol cloud induces a radiative heating of the stratosphere, causing ozone and water vapour changes, thereby altering middle atmospheric dynamics and chemistry. The scale of these impacts for varying injection amounts and heights on stratospheric temperature anomalies is still highly uncertain. Here we analyse specially designed chemistry-climate model experiments following the Historical Eruptions SO 2 Emission Assessment Protocol (HErSEA) under the Interactive Stratospheric Aerosol Model Intercomparison Project (ISA-MIP). The results confirm our general understanding of the stratospheric aerosol forcing due to extra SO 2 injection, while simultaneously highlighting structural differences between models. Overall, for the Pinatubo-like experiments the multi-model mean temperature anomalies agree well with meteorological reanalysis data sets, and we find that in most cases, differences between models are larger than differences for individual models across experiments with varying injection amounts and altitudes. Differences in transport, radiative transfer, and microphysics as well as the characterisation of aerosol size distributions, play a crucial role in the emergence of the spread in the modelled temperature response. Our results show further that the sensitivity of the stratospheric temperature response to model selection is also apparent in other MIPs. Hence, we argue for caution in attribution studies and the interpretation of stratospheric aerosol injection experiments relying on individual or few models.
- Open Access
- 18 May 2026
- Published by Copernicus GmbH
- Vol. 2025, 1-44
Comment on egusphere-2025-5915
Some major volcanic eruptions, such as the one of Mt. Pinatubo in 1991, can inject large amounts of sulfur dioxide (SO2) into the stratosphere, leading to a volcanic aerosol cloud. This dense aerosol cloud induces a radiative heating of the stratosphere, causing ozone and water vapour changes, thereby altering middle atmospheric dynamics and chemistry. The scale of these impacts for varying injection amounts and heights on stratospheric temperature anomalies is still highly uncertain. Here we analyse specially designed chemistry-climate model experiments following the Historical Eruptions SO2 Emission Assessment Protocol (HErSEA) under the Interactive Stratospheric Aerosol Model Intercomparison Project (ISA-MIP). The results confirm our general understanding of the stratospheric aerosol forcing due to extra SO2 injection, while simultaneously highlighting structural differences between models. Overall, for the Pinatubo-like experiments the multi-model mean temperature anomalies agree well with meteorological reanalyses data sets, and we find that in most cases, differences between models are larger than differences for individual models across experiments with varying injection amounts and altitudes. Differences in transport, radiative transfer, and microphysics as well as the characterization of aerosol size distributions play a crucial role for the emergence of the spread in the modelled temperature response. Our results show further, that the sensitivity of the stratospheric temperature response to model selection is also apparent in other MIPs. Hence, we argue for caution in attribution studies and the interpretation of stratospheric aerosol injection experiments relying on individual or few models.
- 18 May 2026
- Published by Copernicus GmbH
- Vol. 2025, 1-44
Open AccessComment on egusphere-2025-5915
Some major volcanic eruptions, such as the one of Mt. Pinatubo in 1991, can inject large amounts of sulfur dioxide (SO2) into the stratosphere, leading to a volcanic aerosol cloud. This dense aerosol cloud induces a radiative heating of the stratosphere, causing ozone and water vapour changes, thereby altering middle atmospheric dynamics and chemistry. The scale of these impacts for varying injection amounts and heights on stratospheric temperature anomalies is still highly uncertain. Here we analyse specially designed chemistry-climate model experiments following the Historical Eruptions SO2 Emission Assessment Protocol (HErSEA) under the Interactive Stratospheric Aerosol Model Intercomparison Project (ISA-MIP). The results confirm our general understanding of the stratospheric aerosol forcing due to extra SO2 injection, while simultaneously highlighting structural differences between models. Overall, for the Pinatubo-like experiments the multi-model mean temperature anomalies agree well with meteorological reanalyses data sets, and we find that in most cases, differences between models are larger than differences for individual models across experiments with varying injection amounts and altitudes. Differences in transport, radiative transfer, and microphysics as well as the characterization of aerosol size distributions play a crucial role for the emergence of the spread in the modelled temperature response. Our results show further, that the sensitivity of the stratospheric temperature response to model selection is also apparent in other MIPs. Hence, we argue for caution in attribution studies and the interpretation of stratospheric aerosol injection experiments relying on individual or few models.
- Open Access
- 1 April 2026
- Published by Copernicus GmbH in Aerosol Research
- Vol. 4 (1) , 169-187
Characterizing aerosol sources based on aerosol optical properties and dispersion modelling in a Scandinavian Coastal Area (Aarhus, Denmark)
Coastal aerosols are formed through the complex mixing between marine air masses and continental emissions, which originate from both natural and anthropogenic sources. The properties of coastal aerosols are decisive for their interaction with sunlight and their influence on clouds, as well as the potential health implications for the population in these areas. In this study, the aerosol properties and sources at Aarhus Bay, Denmark, were investigated by combining in situ aerosol light scattering and absorption with size distribution measurements and footprint analysis by FLEXPART. Our analysis demonstrates a considerable contribution of anthropogenic aerosols from both fossil fuel combustion and biomass burning, as well as periods with highly scattering aerosols. Furthermore, good agreement was found between in situ and modelled black-carbon data. Combining in situ measurements and FLEXPART analysis further evidenced a major impact of local emissions, as well as a few long-range transport intrusions.
- 1 April 2026
- Published by Copernicus GmbH in Aerosol Research
- Vol. 4 (1) , 169-187
Open AccessCharacterizing aerosol sources based on aerosol optical properties and dispersion modelling in a Scandinavian Coastal Area (Aarhus, Denmark)
Coastal aerosols are formed through the complex mixing between marine air masses and continental emissions, which originate from both natural and anthropogenic sources. The properties of coastal aerosols are decisive for their interaction with sunlight and their influence on clouds, as well as the potential health implications for the population in these areas. In this study, the aerosol properties and sources at Aarhus Bay, Denmark, were investigated by combining in situ aerosol light scattering and absorption with size distribution measurements and footprint analysis by FLEXPART. Our analysis demonstrates a considerable contribution of anthropogenic aerosols from both fossil fuel combustion and biomass burning, as well as periods with highly scattering aerosols. Furthermore, good agreement was found between in situ and modelled black-carbon data. Combining in situ measurements and FLEXPART analysis further evidenced a major impact of local emissions, as well as a few long-range transport intrusions.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Source Attribution of High-Latitude Aerosols Based on Multi-Wavelength Optical Properties
Atmospheric aerosols represent one of the largest sources of uncertainty in estimates of future climate predictions. A key challenge arises from the large variety of aerosol types differing in physical properties, e.g. size and shape, and chemical composition as well as concentration. Coastal regions are particularly complex environments, where natural and anthropogenic aerosols co-exist, mix and interact, often fundamentally altering their original properties. At the same time, coastal areas are densely populated, hosting approximately 40 % of the global population. Consequently, improved knowledge of aerosol properties in coastal regions is essential not only for climate studies but also because of their relevance to human health.The aerosols’ optical properties, defined by their interactions with sunlight through scattering and absorption, provide valuable insight into both their physical and chemical properties. The wavelength-dependent light scattering signal can be predominantly related to the particles size, while the wavelength-dependent absorption signal rather more reflects the aerosol particles’ chemical composition. By combining these types of information within a so-called Ångström matrix, the aerosol sources and types can be assessed.In this work, aerosol optical properties were measured at three different coastal sites representing contrasting environments to identify dominant aerosol sources and types. Measurement campaigns were conducted in an urban environment at Aarhus Bay, Denmark, a rural environment at Askö, Sweden and a pristine Arctic environment at Villum Research Station, Northwest Greenland. Wavelength-dependent scattering coefficients were measured using a nephelometer (AURORA 3000, Ecotech) and wavelength-dependent absorption coefficients were obtained by an aethalometer (AE33 or AE36s, MAGEE). In addition, aerosol number size distributions were measured and air-mass back-trajectory analysis was performed. One intense measurement campaign of approximately five weeks was carried out at each site between spring 2023 and spring 2025. The resulting datasets were analysed regarding dominant aerosol sources, determining the importance of natural vs. anthropogenic emissions and locally emitted vs. long-range transported aerosols.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessSource Attribution of High-Latitude Aerosols Based on Multi-Wavelength Optical Properties
Atmospheric aerosols represent one of the largest sources of uncertainty in estimates of future climate predictions. A key challenge arises from the large variety of aerosol types differing in physical properties, e.g. size and shape, and chemical composition as well as concentration. Coastal regions are particularly complex environments, where natural and anthropogenic aerosols co-exist, mix and interact, often fundamentally altering their original properties. At the same time, coastal areas are densely populated, hosting approximately 40 % of the global population. Consequently, improved knowledge of aerosol properties in coastal regions is essential not only for climate studies but also because of their relevance to human health.The aerosols’ optical properties, defined by their interactions with sunlight through scattering and absorption, provide valuable insight into both their physical and chemical properties. The wavelength-dependent light scattering signal can be predominantly related to the particles size, while the wavelength-dependent absorption signal rather more reflects the aerosol particles’ chemical composition. By combining these types of information within a so-called Ångström matrix, the aerosol sources and types can be assessed.In this work, aerosol optical properties were measured at three different coastal sites representing contrasting environments to identify dominant aerosol sources and types. Measurement campaigns were conducted in an urban environment at Aarhus Bay, Denmark, a rural environment at Askö, Sweden and a pristine Arctic environment at Villum Research Station, Northwest Greenland. Wavelength-dependent scattering coefficients were measured using a nephelometer (AURORA 3000, Ecotech) and wavelength-dependent absorption coefficients were obtained by an aethalometer (AE33 or AE36s, MAGEE). In addition, aerosol number size distributions were measured and air-mass back-trajectory analysis was performed. One intense measurement campaign of approximately five weeks was carried out at each site between spring 2023 and spring 2025. The resulting datasets were analysed regarding dominant aerosol sources, determining the importance of natural vs. anthropogenic emissions and locally emitted vs. long-range transported aerosols.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Aerosol-cloud interactions over the high Arctic: CLeancloud Arctic VIllum ExpeRiment (CLAVIER) overview
The Arctic is warming up to 4 times faster than the global average, leading to rapid ice melting and consequently, a drastic change of the sources and processing of aerosols and their impact on clouds. Monitoring of these changes over the Arctic is extremely sparse, especially in the most remote regions where harsh conditions make it difficult to carry out even simple measurements. To address these knowledge gaps and develop better and new methods of remote sensing of aerosols and clouds, the CleanCloud project carried out the field campaign CLeancloud Arctic VIllum ExpeRiment (CLAVIER) at Villum Research Station (VRS) in northeast Greenland to study aerosol-cloud interaction (ACI) using in-situ surface and remote sensing as well as airborne measurements.CLAVIER covered two phase; spring (April) and summer (July/August) 2024, each lasting for one month. We have employed the existing in-situ surface aerosol monitoring at VRS, which includes a Scanning Mobility Particle Sizer (SMPS), a Cloud Condensation Nuclei Counter (CCNC), a High-Volume Sampler (HVS), a Nephelometer, an Aethalometer, a Neutral cluster and Air Ion Spectrometer (NAIS), a wind lidar and a ceilometer. During CLAVIER, the site was additionally equipped with a AeRosol aerosol-cloud lIdar System (ARIS lidar) and a Wideband Integrated Bioaerosol Sensor (WIBS-5/NEO) to provide realtime measurement of aerosols and fluorescent particles to infer the presence of bioaerosols and their potential contribution to Ice Nucelating Particles (INP). In addition, a W-band Cloud Doppler Radar (WProf) and a tethered balloon (Helikite) was operated during the spring phase. The helikite was equipped with aerosol and cloud instrumentation, including a Portable Optical Particle Spectrometer (POPS), a Miniaturized Scanning Electrical Mobility Sizer (mSEMS), a Single-channel tricolor absorption photometer (STAP) and a miniaturized Cloud Droplet Analyzer (miniCDA), and a filter sampler with the new nano-electromechanical membrane FTIR (NEMS-FTIR) technique. A second tethered balloon was also employed for meteorological and flux measurements. In the summer phase, a Proton-Transfer-Reaction Mass Spectrometry (PTR-MS) was used to measure VOCs online and cartridge sampling was performed for offline sampling of VOCs, as well as a WELAS (white-light aerosol spectrometer) for size distribution of larger sizes and the newest aethalometer AE36s. Finally, summertime measurements were also coordinated with the NASA ARCSIX aircraft mission for clousure experiments. In order to get a better understanding of the processes related to aerosol-cloud interactions, several modelling activities were and are being carried out for the CLAVIER period. These include the Flexible Particle Dispersion Model (FLEXPART), the WRF-SIP model to study in detail the secondary ice production in clouds, OpenIFSv48 global model to simulate the aerosol composition and forcing during the campaign, and finally, the FLEXPART-SOSAA framework and the ADCHEM model to study in detail the aerosol chemistry and impacts on CCN.This presentation will provide an overview of these activities and some preliminary results.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessAerosol-cloud interactions over the high Arctic: CLeancloud Arctic VIllum ExpeRiment (CLAVIER) overview
The Arctic is warming up to 4 times faster than the global average, leading to rapid ice melting and consequently, a drastic change of the sources and processing of aerosols and their impact on clouds. Monitoring of these changes over the Arctic is extremely sparse, especially in the most remote regions where harsh conditions make it difficult to carry out even simple measurements. To address these knowledge gaps and develop better and new methods of remote sensing of aerosols and clouds, the CleanCloud project carried out the field campaign CLeancloud Arctic VIllum ExpeRiment (CLAVIER) at Villum Research Station (VRS) in northeast Greenland to study aerosol-cloud interaction (ACI) using in-situ surface and remote sensing as well as airborne measurements.CLAVIER covered two phase; spring (April) and summer (July/August) 2024, each lasting for one month. We have employed the existing in-situ surface aerosol monitoring at VRS, which includes a Scanning Mobility Particle Sizer (SMPS), a Cloud Condensation Nuclei Counter (CCNC), a High-Volume Sampler (HVS), a Nephelometer, an Aethalometer, a Neutral cluster and Air Ion Spectrometer (NAIS), a wind lidar and a ceilometer. During CLAVIER, the site was additionally equipped with a AeRosol aerosol-cloud lIdar System (ARIS lidar) and a Wideband Integrated Bioaerosol Sensor (WIBS-5/NEO) to provide realtime measurement of aerosols and fluorescent particles to infer the presence of bioaerosols and their potential contribution to Ice Nucelating Particles (INP). In addition, a W-band Cloud Doppler Radar (WProf) and a tethered balloon (Helikite) was operated during the spring phase. The helikite was equipped with aerosol and cloud instrumentation, including a Portable Optical Particle Spectrometer (POPS), a Miniaturized Scanning Electrical Mobility Sizer (mSEMS), a Single-channel tricolor absorption photometer (STAP) and a miniaturized Cloud Droplet Analyzer (miniCDA), and a filter sampler with the new nano-electromechanical membrane FTIR (NEMS-FTIR) technique. A second tethered balloon was also employed for meteorological and flux measurements. In the summer phase, a Proton-Transfer-Reaction Mass Spectrometry (PTR-MS) was used to measure VOCs online and cartridge sampling was performed for offline sampling of VOCs, as well as a WELAS (white-light aerosol spectrometer) for size distribution of larger sizes and the newest aethalometer AE36s. Finally, summertime measurements were also coordinated with the NASA ARCSIX aircraft mission for clousure experiments. In order to get a better understanding of the processes related to aerosol-cloud interactions, several modelling activities were and are being carried out for the CLAVIER period. These include the Flexible Particle Dispersion Model (FLEXPART), the WRF-SIP model to study in detail the secondary ice production in clouds, OpenIFSv48 global model to simulate the aerosol composition and forcing during the campaign, and finally, the FLEXPART-SOSAA framework and the ADCHEM model to study in detail the aerosol chemistry and impacts on CCN.This presentation will provide an overview of these activities and some preliminary results.
- Open Access
- 13 January 2026
- Published by Copernicus GmbH
- Vol. 2025, 1-44
Comment on egusphere-2025-5915
Some major volcanic eruptions, such as the one of Mt. Pinatubo in 1991, can inject large amounts of sulfur dioxide (SO2) into the stratosphere, leading to a volcanic aerosol cloud. This dense aerosol cloud induces a radiative heating of the stratosphere, causing ozone and water vapour changes, thereby altering middle atmospheric dynamics and chemistry. The scale of these impacts for varying injection amounts and heights on stratospheric temperature anomalies is still highly uncertain. Here we analyse specially designed chemistry-climate model experiments following the Historical Eruptions SO2 Emission Assessment Protocol (HErSEA) under the Interactive Stratospheric Aerosol Model Intercomparison Project (ISA-MIP). The results confirm our general understanding of the stratospheric aerosol forcing due to extra SO2 injection, while simultaneously highlighting structural differences between models. Overall, for the Pinatubo-like experiments the multi-model mean temperature anomalies agree well with meteorological reanalyses data sets, and we find that in most cases, differences between models are larger than differences for individual models across experiments with varying injection amounts and altitudes. Differences in transport, radiative transfer, and microphysics as well as the characterization of aerosol size distributions play a crucial role for the emergence of the spread in the modelled temperature response. Our results show further, that the sensitivity of the stratospheric temperature response to model selection is also apparent in other MIPs. Hence, we argue for caution in attribution studies and the interpretation of stratospheric aerosol injection experiments relying on individual or few models.
- 13 January 2026
- Published by Copernicus GmbH
- Vol. 2025, 1-44
Open AccessComment on egusphere-2025-5915
Some major volcanic eruptions, such as the one of Mt. Pinatubo in 1991, can inject large amounts of sulfur dioxide (SO2) into the stratosphere, leading to a volcanic aerosol cloud. This dense aerosol cloud induces a radiative heating of the stratosphere, causing ozone and water vapour changes, thereby altering middle atmospheric dynamics and chemistry. The scale of these impacts for varying injection amounts and heights on stratospheric temperature anomalies is still highly uncertain. Here we analyse specially designed chemistry-climate model experiments following the Historical Eruptions SO2 Emission Assessment Protocol (HErSEA) under the Interactive Stratospheric Aerosol Model Intercomparison Project (ISA-MIP). The results confirm our general understanding of the stratospheric aerosol forcing due to extra SO2 injection, while simultaneously highlighting structural differences between models. Overall, for the Pinatubo-like experiments the multi-model mean temperature anomalies agree well with meteorological reanalyses data sets, and we find that in most cases, differences between models are larger than differences for individual models across experiments with varying injection amounts and altitudes. Differences in transport, radiative transfer, and microphysics as well as the characterization of aerosol size distributions play a crucial role for the emergence of the spread in the modelled temperature response. Our results show further, that the sensitivity of the stratospheric temperature response to model selection is also apparent in other MIPs. Hence, we argue for caution in attribution studies and the interpretation of stratospheric aerosol injection experiments relying on individual or few models.
- Open Access
- 6 January 2026
- Published by Springer Nature in npj Climate and Atmospheric Science
- Vol. 9 (1)
Aerosolisation of microalgae: unveiling dimethyl-sulfide emissions during bubbling
- 6 January 2026
- Published by Springer Nature in npj Climate and Atmospheric Science
- Vol. 9 (1)
Open AccessAerosolisation of microalgae: unveiling dimethyl-sulfide emissions during bubbling
- Open Access
- 5 December 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-44
Assessing the stratospheric temperature response to volcanic sulfate injections by Mt. Pinatubo: insights from the Interactive Stratospheric Aerosol Model Intercomparison Project
Some major volcanic eruptions, such as the one of Mt. Pinatubo in 1991, can inject large amounts of sulfur dioxide (SO2) into the stratosphere, leading to a volcanic aerosol cloud. This dense aerosol cloud induces a radiative heating of the stratosphere, causing ozone and water vapour changes, thereby altering middle atmospheric dynamics and chemistry. The scale of these impacts for varying injection amounts and heights on stratospheric temperature anomalies is still highly uncertain. Here we analyse specially designed chemistry-climate model experiments following the Historical Eruptions SO2 Emission Assessment Protocol (HErSEA) under the Interactive Stratospheric Aerosol Model Intercomparison Project (ISA-MIP). The results confirm our general understanding of the stratospheric aerosol forcing due to extra SO2 injection, while simultaneously highlighting structural differences between models. Overall, for the Pinatubo-like experiments the multi-model mean temperature anomalies agree well with meteorological reanalyses data sets, and we find that in most cases, differences between models are larger than differences for individual models across experiments with varying injection amounts and altitudes. Differences in transport, radiative transfer, and microphysics as well as the characterization of aerosol size distributions play a crucial role for the emergence of the spread in the modelled temperature response. Our results show further, that the sensitivity of the stratospheric temperature response to model selection is also apparent in other MIPs. Hence, we argue for caution in attribution studies and the interpretation of stratospheric aerosol injection experiments relying on individual or few models.
- 5 December 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-44
Open AccessAssessing the stratospheric temperature response to volcanic sulfate injections by Mt. Pinatubo: insights from the Interactive Stratospheric Aerosol Model Intercomparison Project
Some major volcanic eruptions, such as the one of Mt. Pinatubo in 1991, can inject large amounts of sulfur dioxide (SO2) into the stratosphere, leading to a volcanic aerosol cloud. This dense aerosol cloud induces a radiative heating of the stratosphere, causing ozone and water vapour changes, thereby altering middle atmospheric dynamics and chemistry. The scale of these impacts for varying injection amounts and heights on stratospheric temperature anomalies is still highly uncertain. Here we analyse specially designed chemistry-climate model experiments following the Historical Eruptions SO2 Emission Assessment Protocol (HErSEA) under the Interactive Stratospheric Aerosol Model Intercomparison Project (ISA-MIP). The results confirm our general understanding of the stratospheric aerosol forcing due to extra SO2 injection, while simultaneously highlighting structural differences between models. Overall, for the Pinatubo-like experiments the multi-model mean temperature anomalies agree well with meteorological reanalyses data sets, and we find that in most cases, differences between models are larger than differences for individual models across experiments with varying injection amounts and altitudes. Differences in transport, radiative transfer, and microphysics as well as the characterization of aerosol size distributions play a crucial role for the emergence of the spread in the modelled temperature response. Our results show further, that the sensitivity of the stratospheric temperature response to model selection is also apparent in other MIPs. Hence, we argue for caution in attribution studies and the interpretation of stratospheric aerosol injection experiments relying on individual or few models.
- Open Access
- 7 November 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-26
Characterizing aerosol sources based on aerosol optical properties and dispersion modelling in a Scandinavian Coastal Area (Aarhus, Denmark)
Coastal aerosols are formed through the complex mixing between marine air masses and continental emissions, which originate from both natural and anthropogenic sources. The properties of coastal aerosols are decisive for their interaction with sunlight and influence on clouds as well as the potential health implications for the population in these areas. In this study, the aerosol properties and sources at Aarhus Bay, Denmark, were investigated by combining in-situ aerosol light scattering and absorption with size distribution measurements and footprint analysis by FLEXPART. Our analysis demonstrates a considerable contribution of anthropogenic aerosols from both fossil fuel combustion and biomass burning as well as periods with highly scattering aerosols. Furthermore, good agreement was found between in-situ and modelled black carbon data. Combining in-situ measurements and FLEXPART analysis further evidenced a major impact of local emissions as well as a few long-range transport intrusions.
- 7 November 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-26
Open AccessCharacterizing aerosol sources based on aerosol optical properties and dispersion modelling in a Scandinavian Coastal Area (Aarhus, Denmark)
Coastal aerosols are formed through the complex mixing between marine air masses and continental emissions, which originate from both natural and anthropogenic sources. The properties of coastal aerosols are decisive for their interaction with sunlight and influence on clouds as well as the potential health implications for the population in these areas. In this study, the aerosol properties and sources at Aarhus Bay, Denmark, were investigated by combining in-situ aerosol light scattering and absorption with size distribution measurements and footprint analysis by FLEXPART. Our analysis demonstrates a considerable contribution of anthropogenic aerosols from both fossil fuel combustion and biomass burning as well as periods with highly scattering aerosols. Furthermore, good agreement was found between in-situ and modelled black carbon data. Combining in-situ measurements and FLEXPART analysis further evidenced a major impact of local emissions as well as a few long-range transport intrusions.