Abd El-Aziz Ahmed Said
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Abd El-Aziz Ahmed Said has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Mohamed Nady Goda
Department of Chemistry, College of Science Imam Mohammad Ibn Saud Islamic University (IMSIU) Riyadh Saudi Arabia
10 shared publications Mohamed N. Goda
Chemistry Department, Faculty of Science, Assiut University, Assiut, Egypt
8 shared publicationsMohamed Nady Goda
Department of Chemistry College of Science Imam Mohammad Ibn Saud Islamic University (IMSIU) Riyadh 11623 Saudi Arabia
6 shared publicationsAref A. M. Aly
Chemistry Department Faculty of Science, Assuit University Egypt
4 shared publicationsHazem S. Ahmed
Qena Paper Industry Company Qena Egypt
4 shared publicationsMohamed Abd El-Aal
Chemistry Department, Faculty of Science, Assiut University, Assiut, Egypt
4 shared publications
Latest Publications
- Open Access
- 4 August 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 24009
Aluminum phosphate-modified red clay as a stable nanocomposite catalyst for the selective conversion of methanol to dimethyl ether
Aluminum phosphate-modified Egyptian red clay (AlPO 4 /ERC) nanocomposites were developed as low-cost solid acid catalysts for methanol dehydration to dimethyl ether (DME). Structural and physicochemical analyses (XRD, FTIR, N₂ adsorption–desorption, TEM, SEM, and acid-probe reactions) show that AlPO 4 incorporation preserves the aluminosilicate framework while tuning surface acidity, porosity, and active-site accessibility. XRF and XRD confirm that ERC consists mainly of quartz, kaolinite, and iron oxides, whereas AlPO 4 introduces additional phosphate phases that interact with the clay matrix. Catalytic testing reveals a strong dependence on AlPO 4 loadings, with 5 wt.% AlPO 4 /ERC exhibiting optimal performance and achieving 90% methanol conversion with 100% DME selectivity at 200 °C. This enhancement correlates with an optimal balance of weak and intermediate acid sites (~ 2.5 mmol g −1 ) and a high specific surface area (52 m 2 g −1 ), which maximizes the number of accessible active centers. Higher loadings reduce activity because of pore blockage and decreased site accessibility. Mechanistically, methanol dehydration proceeds via acid-catalyzed surface methoxy intermediates, with activity governed by acid-site distribution rather than iron species. The catalyst shows excellent stability over 15 days without deactivation, confirming its strong structural robustness. Overall, controlled AlPO 4 incorporation optimizes the acidity-porosity synergy, enabling efficient and stable DME production.
- 4 August 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 24009
Open AccessAluminum phosphate-modified red clay as a stable nanocomposite catalyst for the selective conversion of methanol to dimethyl ether
Aluminum phosphate-modified Egyptian red clay (AlPO 4 /ERC) nanocomposites were developed as low-cost solid acid catalysts for methanol dehydration to dimethyl ether (DME). Structural and physicochemical analyses (XRD, FTIR, N₂ adsorption–desorption, TEM, SEM, and acid-probe reactions) show that AlPO 4 incorporation preserves the aluminosilicate framework while tuning surface acidity, porosity, and active-site accessibility. XRF and XRD confirm that ERC consists mainly of quartz, kaolinite, and iron oxides, whereas AlPO 4 introduces additional phosphate phases that interact with the clay matrix. Catalytic testing reveals a strong dependence on AlPO 4 loadings, with 5 wt.% AlPO 4 /ERC exhibiting optimal performance and achieving 90% methanol conversion with 100% DME selectivity at 200 °C. This enhancement correlates with an optimal balance of weak and intermediate acid sites (~ 2.5 mmol g −1 ) and a high specific surface area (52 m 2 g −1 ), which maximizes the number of accessible active centers. Higher loadings reduce activity because of pore blockage and decreased site accessibility. Mechanistically, methanol dehydration proceeds via acid-catalyzed surface methoxy intermediates, with activity governed by acid-site distribution rather than iron species. The catalyst shows excellent stability over 15 days without deactivation, confirming its strong structural robustness. Overall, controlled AlPO 4 incorporation optimizes the acidity-porosity synergy, enabling efficient and stable DME production.
- 3 September 2025
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 44 (6)
Ozone bleaching and nano‐filler loading for enhanced reed fiber papermaking
It is aimed in this work to explore the possibility of using the reed stalks for the production of pulp suitable for papermaking. To attain this goal, chemical kraft pulping followed by a number of bleaching sequences was implemented. We bleached a reed kraft pulp using H 1 H 2 , D 0 EOD 1 and ZEOD sequences (where H, D, EO and Z represent hypochlorite, chlorine‐dioxide, alkaline extraction, and ozone respectively) to attain considerably good quality pulp that boosts the brightness and brings high mechanical strength. The elementary chlorine‐free (ECF) light bleaching sequences (ZEOD) include an ozone stage which results in imparting a pulp quality to be better than the conventional ECF procedure (D 0 EOD 1 ) and (H 1 H 2 ). Furthermore, to determine the optical, physical, and mechanical properties of reed pulp and paper, the impact of filler retention regarding the properties of paper that incorporates fibers from nano‐filler (CaCO 3 ) loading was investigated and compared with the conventional filler loading. The same amount of nano calcium carbonate additive helps impart optical and mechanical properties compared against the paper manufactured by conventional calcium carbonate.
- 3 September 2025
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 44 (6)
Ozone bleaching and nano‐filler loading for enhanced reed fiber papermaking
It is aimed in this work to explore the possibility of using the reed stalks for the production of pulp suitable for papermaking. To attain this goal, chemical kraft pulping followed by a number of bleaching sequences was implemented. We bleached a reed kraft pulp using H 1 H 2 , D 0 EOD 1 and ZEOD sequences (where H, D, EO and Z represent hypochlorite, chlorine‐dioxide, alkaline extraction, and ozone respectively) to attain considerably good quality pulp that boosts the brightness and brings high mechanical strength. The elementary chlorine‐free (ECF) light bleaching sequences (ZEOD) include an ozone stage which results in imparting a pulp quality to be better than the conventional ECF procedure (D 0 EOD 1 ) and (H 1 H 2 ). Furthermore, to determine the optical, physical, and mechanical properties of reed pulp and paper, the impact of filler retention regarding the properties of paper that incorporates fibers from nano‐filler (CaCO 3 ) loading was investigated and compared with the conventional filler loading. The same amount of nano calcium carbonate additive helps impart optical and mechanical properties compared against the paper manufactured by conventional calcium carbonate.
- 9 July 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (26)
Sugarcane Bagasse Fly Ash Modified with Bentonite as Low‐Cost Adsorbents for Removal of Methylene Blue and Congo Red Dyes from Aqueous Solution
The poisoning of surface water sources by both organic and inorganic pollutants is a major concern in rapidly industrializing countries. Therefore, it is imperative to remove these potentially harmful contaminants from the aquatic environment utilizing environmentally friendly technology. Sugarcane bagasse fly ash (SCBFA) produced in a huge quantity from steam boilers as a wasted material causes a big problem in environment. Thus, the current investigation deals with the utilization of SCBFA with and without bentonite modification as an effective green adsorbent for the adsorptive removal of methylene blue (MB) and congo red (CR) dyes from aqueous solutions. In order to assess the adsorption capability of both pure and bentonite‐modified SCBFA, batch tests were carried out to examine the effects of initial dye concentration, calcination temperature, pH, contact time, and weight percentage of bentonite on the adsorption process. X‐ray fluorescence (XRF), X‐ray diffraction (XRD), and Fourier transform infrared (FTIR) analyses were performed to extensively characterize the pure and modified SCBFA. Results revealed that mixing of SCBFA with low % of bentonite significantly enhance its acidity which in turns significantly improve its adsorption capacity towards MB and CR eliminations. It was found that, modifying of SCBFA with 10% bentonite dramatically increases the value of Q m from 10.0 to 420 mg g −1 and from 16.9 to 96 mg g −1 respectively for the MB and CR remediation in aqueous neutral medium of pH of 7.0. Such improvement was successfully attributed to the acidity changes with bentonite modifications. Thermodynamic studies further indicated that the adsorption process is spontaneous, endothermic, and chemisorptive in nature. On the other hand, kinetic investigations revealed that the film diffusion mechanisms govern the adsorption of both dyes. The adsorption process over the bentonite/SCBFA sorbent was regulated by first order kinetics, whereas the pure SCBFA was governed by a pseudo‐second‐order kinetics. During the course of three successive cycles, the Bentonite (10%)/SCBFA composite demonstrated remarkably high stability toward the elimination of both dyes.
- 9 July 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (26)
Sugarcane Bagasse Fly Ash Modified with Bentonite as Low‐Cost Adsorbents for Removal of Methylene Blue and Congo Red Dyes from Aqueous Solution
The poisoning of surface water sources by both organic and inorganic pollutants is a major concern in rapidly industrializing countries. Therefore, it is imperative to remove these potentially harmful contaminants from the aquatic environment utilizing environmentally friendly technology. Sugarcane bagasse fly ash (SCBFA) produced in a huge quantity from steam boilers as a wasted material causes a big problem in environment. Thus, the current investigation deals with the utilization of SCBFA with and without bentonite modification as an effective green adsorbent for the adsorptive removal of methylene blue (MB) and congo red (CR) dyes from aqueous solutions. In order to assess the adsorption capability of both pure and bentonite‐modified SCBFA, batch tests were carried out to examine the effects of initial dye concentration, calcination temperature, pH, contact time, and weight percentage of bentonite on the adsorption process. X‐ray fluorescence (XRF), X‐ray diffraction (XRD), and Fourier transform infrared (FTIR) analyses were performed to extensively characterize the pure and modified SCBFA. Results revealed that mixing of SCBFA with low % of bentonite significantly enhance its acidity which in turns significantly improve its adsorption capacity towards MB and CR eliminations. It was found that, modifying of SCBFA with 10% bentonite dramatically increases the value of Q m from 10.0 to 420 mg g −1 and from 16.9 to 96 mg g −1 respectively for the MB and CR remediation in aqueous neutral medium of pH of 7.0. Such improvement was successfully attributed to the acidity changes with bentonite modifications. Thermodynamic studies further indicated that the adsorption process is spontaneous, endothermic, and chemisorptive in nature. On the other hand, kinetic investigations revealed that the film diffusion mechanisms govern the adsorption of both dyes. The adsorption process over the bentonite/SCBFA sorbent was regulated by first order kinetics, whereas the pure SCBFA was governed by a pseudo‐second‐order kinetics. During the course of three successive cycles, the Bentonite (10%)/SCBFA composite demonstrated remarkably high stability toward the elimination of both dyes.
- Open Access
- 2 May 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-18
Potential application of zirconium molybdate as a novel catalyst for the selective dehydrogenation of methanol to anhydrous formaldehyde
The non-oxidative dehydrogenation of methanol is considered a promising method for producing formaldehyde (FA), where the resulting anhydrous formaldehyde is perfect for the use in the subsequent generation of oxygenated synthetic fuels. In the current investigation, a series of Zr(MoO4)2 nanoaggregates, as a novel solid acid catalyst, were hydrothermally fabricated at different temperatures in the presence of triethylamine (TEA) as a surfactant. The original and calcined catalysts were characterized by TGA, DSC, XRD, FT-IR, XPS, HR-TEM, acidity and nitrogen sorption. Analyses revealed that the addition of TEA to the preparation procedures significantly enhanced the textural, acidic, and the catalytic performance of these catalysts. Acidity measurements reflected that the surface of these catalysts possessed Brønsted type of acidic sites of weak and intermediate strength. Catalytic activity results demonstrated that, Zr(MoO4)2 catalyst with Zr: TEA molar ratio of 1:1 (Z1T1) annealed at 400°C exhibited the maximum methanol conversion of 99% and 95% selectivity to formaldehyde at reaction temperature of 325°C. The remarkable catalytic performance was well correlated to the variation in acidity of the catalyst. This catalyst offered a long-term stability towards the production of formaldehyde for a period of time of 160 h with the same activity and selectivity. Also, this catalyst could be re-used for five time giving almost the same performance. The reason for this extreme catalytic activity and selectivity towards formaldehyde synthesis is the presence of weak and moderate strengthened Brønsted acid sites. In light of this, this work has produced an active, stable, and selective catalyst for the conversion of methanol to formaldehyde that is competitive with the most effective conventional and recently discovered catalysts.
- 2 May 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-18
Open AccessPotential application of zirconium molybdate as a novel catalyst for the selective dehydrogenation of methanol to anhydrous formaldehyde
The non-oxidative dehydrogenation of methanol is considered a promising method for producing formaldehyde (FA), where the resulting anhydrous formaldehyde is perfect for the use in the subsequent generation of oxygenated synthetic fuels. In the current investigation, a series of Zr(MoO4)2 nanoaggregates, as a novel solid acid catalyst, were hydrothermally fabricated at different temperatures in the presence of triethylamine (TEA) as a surfactant. The original and calcined catalysts were characterized by TGA, DSC, XRD, FT-IR, XPS, HR-TEM, acidity and nitrogen sorption. Analyses revealed that the addition of TEA to the preparation procedures significantly enhanced the textural, acidic, and the catalytic performance of these catalysts. Acidity measurements reflected that the surface of these catalysts possessed Brønsted type of acidic sites of weak and intermediate strength. Catalytic activity results demonstrated that, Zr(MoO4)2 catalyst with Zr: TEA molar ratio of 1:1 (Z1T1) annealed at 400°C exhibited the maximum methanol conversion of 99% and 95% selectivity to formaldehyde at reaction temperature of 325°C. The remarkable catalytic performance was well correlated to the variation in acidity of the catalyst. This catalyst offered a long-term stability towards the production of formaldehyde for a period of time of 160 h with the same activity and selectivity. Also, this catalyst could be re-used for five time giving almost the same performance. The reason for this extreme catalytic activity and selectivity towards formaldehyde synthesis is the presence of weak and moderate strengthened Brønsted acid sites. In light of this, this work has produced an active, stable, and selective catalyst for the conversion of methanol to formaldehyde that is competitive with the most effective conventional and recently discovered catalysts.
- 6 March 2025
- Published by Springer Nature in Catalysis Letters
- Vol. 155 (4) , 1-17
Enhanced Catalytic Performance of Egyptian Red Clay Modified with Zirconia Nanoparticles for Methanol Dehydration to Dimethyl Ether
- 6 March 2025
- Published by Springer Nature in Catalysis Letters
- Vol. 155 (4) , 1-17
Enhanced Catalytic Performance of Egyptian Red Clay Modified with Zirconia Nanoparticles for Methanol Dehydration to Dimethyl Ether
- 27 April 2024
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1311
Efficient green synthesis of n-amyl acetate in liquid phase over metal-organic framework catalysts
- 27 April 2024
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1311
Efficient green synthesis of n-amyl acetate in liquid phase over metal-organic framework catalysts
- 30 January 2024
- Published by Wiley in Journal of the Chinese Chemical Society
- Vol. 71 (3) , 333-344
Zirconia–sugarcane bagasse fly ash as a novel solid acid nanocatalyst for selective dehydration of methanol to dimethyl ether
In the current study, two series of catalysts were synthesized and characterized by various physicochemical techniques. In the first series of catalysts, a chemical precipitation method was used for loading 1–20 wt. % ZrO2 on the surface of sugarcane bagasse fly ash (SCBFA) with the goal of finding out the optimal ZrO2 loading. In the second series, the 20% ZrO2/SCBFA composition was modified by (1–10 wt. %) SO42− by wet impregnation method. The acidity of these catalysts was determined through the dehydration of isopropyl alcohol and the chemisorption of pyridine and 2,6‐dimethyl pyridine. The catalytic efficiency for the dehydration of methanol to dimethyl ether (DME) in a fixed‐bed reactor at atmospheric pressure was investigated. A ~ 95% yield toward DME is maximized over the 10% SO42−/20% ZrO2/SCBFA catalyst at a reaction temperature of 400°C. Additionally, it maintained nearly the same efficiency over a 90‐h period and demonstrated outstanding long‐term stability. The specific surface area and the acidity are the most important factors responsible for enhancing the catalytic performance in this reaction. Our study reflects that SCBFA‐supported zirconia and that modified with SO42− are low‐cost, effective, eco‐friendly, and recyclable catalysts that are highly suited to apply for production of DME from methanol.
- 30 January 2024
- Published by Wiley in Journal of the Chinese Chemical Society
- Vol. 71 (3) , 333-344
Zirconia–sugarcane bagasse fly ash as a novel solid acid nanocatalyst for selective dehydration of methanol to dimethyl ether
In the current study, two series of catalysts were synthesized and characterized by various physicochemical techniques. In the first series of catalysts, a chemical precipitation method was used for loading 1–20 wt. % ZrO2 on the surface of sugarcane bagasse fly ash (SCBFA) with the goal of finding out the optimal ZrO2 loading. In the second series, the 20% ZrO2/SCBFA composition was modified by (1–10 wt. %) SO42− by wet impregnation method. The acidity of these catalysts was determined through the dehydration of isopropyl alcohol and the chemisorption of pyridine and 2,6‐dimethyl pyridine. The catalytic efficiency for the dehydration of methanol to dimethyl ether (DME) in a fixed‐bed reactor at atmospheric pressure was investigated. A ~ 95% yield toward DME is maximized over the 10% SO42−/20% ZrO2/SCBFA catalyst at a reaction temperature of 400°C. Additionally, it maintained nearly the same efficiency over a 90‐h period and demonstrated outstanding long‐term stability. The specific surface area and the acidity are the most important factors responsible for enhancing the catalytic performance in this reaction. Our study reflects that SCBFA‐supported zirconia and that modified with SO42− are low‐cost, effective, eco‐friendly, and recyclable catalysts that are highly suited to apply for production of DME from methanol.