Jason Louis Sonnenberg
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jason Louis Sonnenberg has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
H. Bernhard Schlegel
Department of Chemistry, Wayne State University, Detroit, Michigan 48202
5 shared publications- H. Bernhard Schlegel
Wayne State University
3 shared publications P. Jeffrey Hay
Department of Chemistry and Institute of Scientific Computing, Wayne State University, Detroit, Michigan 48202, Department of Chemistry, The Ohio State University, Columbus, Ohio 43210, and Theoretical Division, Los Alamos National Laboratory, Mail Stop B268, Los Alamos, New Mexico 87545
3 shared publicationsRichard L. Martin
Department of Chemistry and Institute of Scientific Computing, Wayne State University, Detroit, Michigan 48202, Department of Chemistry, The Ohio State University, Columbus, Ohio 43210, and Theoretical Division, Los Alamos National Laboratory, Mail Stop B268, Los Alamos, New Mexico 87545
3 shared publications- Alexandra Simperler
Institut für Organische Chemie, Universität Wien, A-1090 Vienna, Austria, AT
2 shared publications Bruce E. Bursten
Department of Chemistry and Institute of Scientific Computing, Wayne State University, Detroit, Michigan 48202, Department of Chemistry, The Ohio State University, Columbus, Ohio 43210, and Theoretical Division, Los Alamos National Laboratory, Mail Stop B268, Los Alamos, New Mexico 87545
2 shared publications
Latest Publications
- Open Access
Calcium triggers Cryptococcus neoformans aggregation by forming coordination bonds with capsular glucuronoxylomannan
The cryptococcal polysaccharide capsule is a unique eukaryotic virulence factor that is a target for the immune system and the development of therapeutic antibodies. Our understanding of capsular architecture is limited to a few studies suggesting that metal dications play a role. In this work we explore a mechanism of cryptococcal aggregation that depends on calcium phosphate precipitation. We describe the chemical and biophysical properties of calcium interaction with the predominant cryptococcal polysaccharide, glucuronoxylomannan (GXM). We show that cell aggregation is a pH-dependent and occurs in a calcium dose-dependent manner. Furthermore, this cellular aggregation phenomenon as well as interpolymer capsular polysaccharide interactions are unique to calcium dications and do not occur with other mono- or dications as shown by size exclusion chromatography and circular dichroism. Diffusion ordered spectroscopy nuclear magnetic resonance and ab-initio calculations support complexation of calcium with glucuronic acid (GlcA). The ab-initio calculations also suggest that calcium ions can complex up to four GlcA monomers. Not only does calcium act as a scaffold for the cryptococcal capsule, interacting with up to four glucuronic acid residues of GXM, but calcium phosphate treatment of cells reduces the anti-phagocytic properties of the capsule, promoting ingestion by macrophages and altering antibody interactions with the capsule. This work advances our understanding of the cryptococcal capsule, its biophysical properties, by providing a model for the critical role of calcium interactions with capsular polymers of Cryptococcus neoformans including important impacts at the host-cell interface.
Open AccessCalcium triggers Cryptococcus neoformans aggregation by forming coordination bonds with capsular glucuronoxylomannan
The cryptococcal polysaccharide capsule is a unique eukaryotic virulence factor that is a target for the immune system and the development of therapeutic antibodies. Our understanding of capsular architecture is limited to a few studies suggesting that metal dications play a role. In this work we explore a mechanism of cryptococcal aggregation that depends on calcium phosphate precipitation. We describe the chemical and biophysical properties of calcium interaction with the predominant cryptococcal polysaccharide, glucuronoxylomannan (GXM). We show that cell aggregation is a pH-dependent and occurs in a calcium dose-dependent manner. Furthermore, this cellular aggregation phenomenon as well as interpolymer capsular polysaccharide interactions are unique to calcium dications and do not occur with other mono- or dications as shown by size exclusion chromatography and circular dichroism. Diffusion ordered spectroscopy nuclear magnetic resonance and ab-initio calculations support complexation of calcium with glucuronic acid (GlcA). The ab-initio calculations also suggest that calcium ions can complex up to four GlcA monomers. Not only does calcium act as a scaffold for the cryptococcal capsule, interacting with up to four glucuronic acid residues of GXM, but calcium phosphate treatment of cells reduces the anti-phagocytic properties of the capsule, promoting ingestion by macrophages and altering antibody interactions with the capsule. This work advances our understanding of the cryptococcal capsule, its biophysical properties, by providing a model for the critical role of calcium interactions with capsular polymers of Cryptococcus neoformans including important impacts at the host-cell interface.
- 24 February 2020
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 124 (12) , 2460-2472
Stability Series for the Complexation of Six Key Siderophore Functional Groups with Uranyl Using Density Functional Theory
Determining stability constants of uranyl complexes with the principal functional groups in siderophores and identifying stability series is of great importance to predict which siderophore classes preferentially bind to UVI and hence impact uranium speciation in the environment. It also helps to develop resins for scavenging UVI from aqueous solutions. Here, we apply a recently developed computational approach to calculate log β values for a set of geochemically relevant uranium organometallic complexes using Density Functional Theory (DFT). We determined the stability series for catecholate, hydroxamate, α-hydroxycarboxylate, α-aminocarboxylate, hydroxy-phenyloxazolonate, and α-hydroxyimidazole with the uranyl cation. In this work, the stability constants (log β110) of α-hydroxyimidazolate and hydroxy-phenyloxazolonate are calculated for the first time. Our approach employed the B3LYP density functional approximation, aug-cc-pVDZ basis set for ligand atoms, MDF60 ECP for UVI, and the IEFPCM solvation model. DFT calculated log β110 were corrected using a previously established fitting equation. We find that the siderophore functional groups stability decreases in the order: α-hydroxycarboxylate bound via the α-hydroxy and carboxylate groups (log β110 = 17.08), α-hydroxyimidazolate (log β110 = 16.55), catecholate (log β110 = 16.43), hydroxamate (log β110 = 9.00), hydroxy-phenyloxazolonate (log β110 = 8.43), α-hydroxycarboxylate bound via the carboxylate group (log β110 = 7.51) and α-aminocarboxylate (log β110 = 4.73). We confirm that the stability for the binding mode of the functional groups decrease in the order: bidentate, monodentate via ligand O atoms and monodentate via ligand N atoms. The stability series strongly suggests that α-hydroxyimidazolate is an important functional group that needs to be included when assessing uranyl mobility and removal from aqueous solutions.
- 24 February 2020
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 124 (12) , 2460-2472
Stability Series for the Complexation of Six Key Siderophore Functional Groups with Uranyl Using Density Functional Theory
Determining stability constants of uranyl complexes with the principal functional groups in siderophores and identifying stability series is of great importance to predict which siderophore classes preferentially bind to UVI and hence impact uranium speciation in the environment. It also helps to develop resins for scavenging UVI from aqueous solutions. Here, we apply a recently developed computational approach to calculate log β values for a set of geochemically relevant uranium organometallic complexes using Density Functional Theory (DFT). We determined the stability series for catecholate, hydroxamate, α-hydroxycarboxylate, α-aminocarboxylate, hydroxy-phenyloxazolonate, and α-hydroxyimidazole with the uranyl cation. In this work, the stability constants (log β110) of α-hydroxyimidazolate and hydroxy-phenyloxazolonate are calculated for the first time. Our approach employed the B3LYP density functional approximation, aug-cc-pVDZ basis set for ligand atoms, MDF60 ECP for UVI, and the IEFPCM solvation model. DFT calculated log β110 were corrected using a previously established fitting equation. We find that the siderophore functional groups stability decreases in the order: α-hydroxycarboxylate bound via the α-hydroxy and carboxylate groups (log β110 = 17.08), α-hydroxyimidazolate (log β110 = 16.55), catecholate (log β110 = 16.43), hydroxamate (log β110 = 9.00), hydroxy-phenyloxazolonate (log β110 = 8.43), α-hydroxycarboxylate bound via the carboxylate group (log β110 = 7.51) and α-aminocarboxylate (log β110 = 4.73). We confirm that the stability for the binding mode of the functional groups decrease in the order: bidentate, monodentate via ligand O atoms and monodentate via ligand N atoms. The stability series strongly suggests that α-hydroxyimidazolate is an important functional group that needs to be included when assessing uranyl mobility and removal from aqueous solutions.
- Open Access
- 4 September 2018
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 122 (40) , 8007-8019
Computational Tools for Calculating log β Values of Geochemically Relevant Uranium Organometallic Complexes
Uranium (UVI) interacts with organic ligands controlling subsequently its aqueous chemistry. It is therefore imperative to assess the binding ability of natural organic molecules. In this paper, we evidence that density functional theory (DFT) can be used as a practical protocol for predicting the stability of UVI organic ligand complexes, allowing for the development of relative stability series for organic complexes with limited experimental data. Solvation methods and DFT settings were benchmarked to suggest a suitable off-the-shelf solution. The results indicate the IEFPCM solvation method should be employed. A mixed solvation approach improves the accuracy of the calculated stability constant (logβ), however, the calculated logβ are approximately five times more favorable than experimental data. Different basis sets, functionals and effective core potentials were tested to check there are no major changes in molecular geometries and ∆rG. The recommended method employed is the B3LYP functional, aug-cc-pVDZ basis set for ligands, MDF60 ECP and basis set for UVI, and the IEFPCM solvation model. Using the fitting approach employed in the literature with these updated DFT settings allows fitting of 1:1 UVI complexes with root mean square deviation of 1.38 logβ units. Fitting multiple bound carboxylate ligands indicate a second, separate fitting for 1:2 and 1:3 complexes.
- 4 September 2018
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 122 (40) , 8007-8019
Open AccessComputational Tools for Calculating log β Values of Geochemically Relevant Uranium Organometallic Complexes
Uranium (UVI) interacts with organic ligands controlling subsequently its aqueous chemistry. It is therefore imperative to assess the binding ability of natural organic molecules. In this paper, we evidence that density functional theory (DFT) can be used as a practical protocol for predicting the stability of UVI organic ligand complexes, allowing for the development of relative stability series for organic complexes with limited experimental data. Solvation methods and DFT settings were benchmarked to suggest a suitable off-the-shelf solution. The results indicate the IEFPCM solvation method should be employed. A mixed solvation approach improves the accuracy of the calculated stability constant (logβ), however, the calculated logβ are approximately five times more favorable than experimental data. Different basis sets, functionals and effective core potentials were tested to check there are no major changes in molecular geometries and ∆rG. The recommended method employed is the B3LYP functional, aug-cc-pVDZ basis set for ligands, MDF60 ECP and basis set for UVI, and the IEFPCM solvation model. Using the fitting approach employed in the literature with these updated DFT settings allows fitting of 1:1 UVI complexes with root mean square deviation of 1.38 logβ units. Fitting multiple bound carboxylate ligands indicate a second, separate fitting for 1:2 and 1:3 complexes.
- Open Access
- 28 August 2015
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 10 (8) , e0136362
Proteins with Intrinsically Disordered Domains Are Preferentially Recruited to Polyglutamine Aggregates
Intracellular protein aggregation is the hallmark of several neurodegenerative diseases. Aggregates formed by polyglutamine (polyQ)-expanded proteins, such as Huntingtin, adopt amyloid-like structures that are resistant to denaturation. We used a novel purification strategy to isolate aggregates formed by human Huntingtin N-terminal fragments with expanded polyQ tracts from both yeast and mammalian (PC-12) cells. Using mass spectrometry we identified the protein species that are trapped within these polyQ aggregates. We found that proteins with very long intrinsically-disordered (ID) domains (≥100 amino acids) and RNA-binding proteins were disproportionately recruited into aggregates. The removal of the ID domains from selected proteins was sufficient to eliminate their recruitment into polyQ aggregates. We also observed that several neurodegenerative disease-linked proteins were reproducibly trapped within the polyQ aggregates purified from mammalian cells. Many of these proteins have large ID domains and are found in neuronal inclusions in their respective diseases. Our study indicates that neurodegenerative disease-associated proteins are particularly vulnerable to recruitment into polyQ aggregates via their ID domains. Also, the high frequency of ID domains in RNA-binding proteins may explain why RNA-binding proteins are frequently found in pathological inclusions in various neurodegenerative diseases.
- 28 August 2015
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 10 (8) , e0136362
Open AccessProteins with Intrinsically Disordered Domains Are Preferentially Recruited to Polyglutamine Aggregates
Intracellular protein aggregation is the hallmark of several neurodegenerative diseases. Aggregates formed by polyglutamine (polyQ)-expanded proteins, such as Huntingtin, adopt amyloid-like structures that are resistant to denaturation. We used a novel purification strategy to isolate aggregates formed by human Huntingtin N-terminal fragments with expanded polyQ tracts from both yeast and mammalian (PC-12) cells. Using mass spectrometry we identified the protein species that are trapped within these polyQ aggregates. We found that proteins with very long intrinsically-disordered (ID) domains (≥100 amino acids) and RNA-binding proteins were disproportionately recruited into aggregates. The removal of the ID domains from selected proteins was sufficient to eliminate their recruitment into polyQ aggregates. We also observed that several neurodegenerative disease-linked proteins were reproducibly trapped within the polyQ aggregates purified from mammalian cells. Many of these proteins have large ID domains and are found in neuronal inclusions in their respective diseases. Our study indicates that neurodegenerative disease-associated proteins are particularly vulnerable to recruitment into polyQ aggregates via their ID domains. Also, the high frequency of ID domains in RNA-binding proteins may explain why RNA-binding proteins are frequently found in pathological inclusions in various neurodegenerative diseases.
- 5 August 2010
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 6 (9) , 2566-2580
Proton Transfer Studied Using a Combined Ab Initio Reactive Potential Energy Surface with Quantum Path Integral Methodology
The rates of intramolecular proton transfer are calculated on a full-dimensional reactive electronic potential energy surface that incorporates high-level ab initio calculations along the reaction path and by using classical transition state theory, path-integral quantum transition state theory, and the quantum instanton approach. The specific example problem studied is malonaldehyde. Estimates of the kinetic isotope effect using the latter two methods are found to be in reasonable agreement with each other. Improvements and extensions of this practical, yet chemically accurate framework for the calculations of quantized, reactive dynamics are also discussed.
- 5 August 2010
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 6 (9) , 2566-2580
Proton Transfer Studied Using a Combined Ab Initio Reactive Potential Energy Surface with Quantum Path Integral Methodology
The rates of intramolecular proton transfer are calculated on a full-dimensional reactive electronic potential energy surface that incorporates high-level ab initio calculations along the reaction path and by using classical transition state theory, path-integral quantum transition state theory, and the quantum instanton approach. The specific example problem studied is malonaldehyde. Estimates of the kinetic isotope effect using the latter two methods are found to be in reasonable agreement with each other. Improvements and extensions of this practical, yet chemically accurate framework for the calculations of quantized, reactive dynamics are also discussed.
- 14 June 2010
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 49 (14) , 6545-6551
Theoretical Studies of AnII2(C8H8)2 (An = Th, Pa, U, and Np) Complexes: The Search for Double-Stuffed Actinide Metallocenes
Complexes of the form An2(C8H8)2 (An = Th, Pa, U, and Np) were investigated using density functional theory with scalar-relativistic effective core potentials. For uranium, a coaxial isomer with D8h symmetry is found to be more stable than a Cs isomer in which the dimetal unit is perpendicular to the C8 ring axis. Similar coaxial structures are predicted for Pa2(C8H8)2 and Np2(C8H8)2, while in Th2(C8H8)2, the C8H8 rings tilt away from the An−An axis. Going from Th2(C8H8)2 to Np2(C8H8)2, the An−An bond length decreases from 2.81 Å to 2.19 Å and the An−An stretching frequency increases from 249 to 354 cm−1. This is a result of electrons populating An−An 5f π- and δ-type bonding orbitals and ϕ nonbonding orbitals, thereby increasing in An−An bond order. U2(C8H8)2 is stable with respect to dissociation into U(C8H8) monomers. Disproportionation of U2(C8H8)2 into uranocene and the U atom is endothermic but is slightly exothermic for uranocene plus 1/2U2, suggesting that it might be possible to prepare double stuffed uranocene if suitable conditions can be found to avoid disproportionation.
- 14 June 2010
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 49 (14) , 6545-6551
Theoretical Studies of AnII2(C8H8)2 (An = Th, Pa, U, and Np) Complexes: The Search for Double-Stuffed Actinide Metallocenes
Complexes of the form An2(C8H8)2 (An = Th, Pa, U, and Np) were investigated using density functional theory with scalar-relativistic effective core potentials. For uranium, a coaxial isomer with D8h symmetry is found to be more stable than a Cs isomer in which the dimetal unit is perpendicular to the C8 ring axis. Similar coaxial structures are predicted for Pa2(C8H8)2 and Np2(C8H8)2, while in Th2(C8H8)2, the C8H8 rings tilt away from the An−An axis. Going from Th2(C8H8)2 to Np2(C8H8)2, the An−An bond length decreases from 2.81 Å to 2.19 Å and the An−An stretching frequency increases from 249 to 354 cm−1. This is a result of electrons populating An−An 5f π- and δ-type bonding orbitals and ϕ nonbonding orbitals, thereby increasing in An−An bond order. U2(C8H8)2 is stable with respect to dissociation into U(C8H8) monomers. Disproportionation of U2(C8H8)2 into uranocene and the U atom is endothermic but is slightly exothermic for uranocene plus 1/2U2, suggesting that it might be possible to prepare double stuffed uranocene if suitable conditions can be found to avoid disproportionation.
- 11 March 2009
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 5 (4) , 949-961
Distributed Gaussian Valence Bond Surface Derived from Ab Initio Calculations
The experimental and computational results for the tautomerization reaction of 2-pyridone are reviewed. G3, G4, CBS-APNO, and W1 model chemistries are used to generate state-of-the-art reaction energetics for the tautomerization reaction with and without catalytic water molecules in both the gas and aqueous phases. Reactive, electronic potential energy surface surfaces for use in molecular dynamics simulations were generated for these reactions following a recently improved empirical valence bond formulation. The form of molecular mechanics potentials needed for a satisfactory fit is also discussed.
- 11 March 2009
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 5 (4) , 949-961
Distributed Gaussian Valence Bond Surface Derived from Ab Initio Calculations
The experimental and computational results for the tautomerization reaction of 2-pyridone are reviewed. G3, G4, CBS-APNO, and W1 model chemistries are used to generate state-of-the-art reaction energetics for the tautomerization reaction with and without catalytic water molecules in both the gas and aqueous phases. Reactive, electronic potential energy surface surfaces for use in molecular dynamics simulations were generated for these reactions following a recently improved empirical valence bond formulation. The form of molecular mechanics potentials needed for a satisfactory fit is also discussed.
- 7 October 2007
- Published by Taylor & Francis in Molecular Physics
- Vol. 105 (19-22) , 2719-2729
Empirical valence bond models for reactive potential energy surfaces. II. Intramolecular proton transfer in pyridone and the Claisen reaction of allyl vinyl ether
Empirical valence bond (EVB) surfaces have been constructed for 2-pyridone-2-hydroxypyridine proton transfer and for the Claisen rearrangement of allyl vinyl ether at the MP2/6-311 + G(d,p) level of theory. A distributed Gaussian approach is used to approximate the interaction matrix elements. Parameters for the distributed Gaussians are determined by fitting to energy, gradient and Hessian data obtained from ab initio electronic structure calculations at one to nine points along the reaction path. An efficient DIIS (direct inversion of iterative subspace) method is used to solve the fitting equations. Criteria for choosing internal coordinates for the representation of the potential energy surfaces and for the interaction matrix element are discussed. Practical techniques for determining the placement and exponents of the Gaussians are described. With one set of s-, p- and d-type Gaussians at the transition state, the error in the energy along the reaction path is less than 10 kJ mol−1 for pyridone tautomerization. Five sets of Gaussians reduces the error to less than 5 kJ mol−1 and seven Gaussians drops the error below 1 kJ mol−1. The Claisen rearrangement is more challenging and requires seven Gaussians to achieve an error of less than 4 kJ mol−1 for energies along the reaction path.
- 7 October 2007
- Published by Taylor & Francis in Molecular Physics
- Vol. 105 (19-22) , 2719-2729
Empirical valence bond models for reactive potential energy surfaces. II. Intramolecular proton transfer in pyridone and the Claisen reaction of allyl vinyl ether
Empirical valence bond (EVB) surfaces have been constructed for 2-pyridone-2-hydroxypyridine proton transfer and for the Claisen rearrangement of allyl vinyl ether at the MP2/6-311 + G(d,p) level of theory. A distributed Gaussian approach is used to approximate the interaction matrix elements. Parameters for the distributed Gaussians are determined by fitting to energy, gradient and Hessian data obtained from ab initio electronic structure calculations at one to nine points along the reaction path. An efficient DIIS (direct inversion of iterative subspace) method is used to solve the fitting equations. Criteria for choosing internal coordinates for the representation of the potential energy surfaces and for the interaction matrix element are discussed. Practical techniques for determining the placement and exponents of the Gaussians are described. With one set of s-, p- and d-type Gaussians at the transition state, the error in the energy along the reaction path is less than 10 kJ mol−1 for pyridone tautomerization. Five sets of Gaussians reduces the error to less than 5 kJ mol−1 and seven Gaussians drops the error below 1 kJ mol−1. The Claisen rearrangement is more challenging and requires seven Gaussians to achieve an error of less than 4 kJ mol−1 for energies along the reaction path.
- 1 April 2007
- Published by Elsevier in Journal of Pharmaceutical and Biomedical Analysis
- Vol. 43 (5) , 1660-1666
Automated approach to couple solubility with final pH and crystallinity for pharmaceutical discovery compounds
- 1 April 2007
- Published by Elsevier in Journal of Pharmaceutical and Biomedical Analysis
- Vol. 43 (5) , 1660-1666
Automated approach to couple solubility with final pH and crystallinity for pharmaceutical discovery compounds
- 29 March 2007
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 129 (16) , 5217-5227
A Definitive Example of a Geometric “Entatic State” Effect: Electron-Transfer Kinetics for a Copper(II/I) Complex Involving A Quinquedentate Macrocyclic Trithiaether−Bipyridine Ligand
The quinquedentate macrocyclic ligand cyclo-6,6'-[1,9-(2,5,8-trithianonane)]-2,2'-bipyridine ([15]aneS3bpy = L), containing two pyridyl nitrogens and three thiaether sulfurs as donor atoms, has been synthesized and complexed with copper. The CuII/IL redox potential, the stabilities of the oxidized and reduced complex, and the oxidation and reduction electron-transfer kinetics of the complex reacting with a series of six counter reagents have been studied in acetonitrile at 25 degrees C, mu = 0.10 M (NaClO4). The Marcus cross relationship has been applied to the rate constants obtained for the reactions with each of the six counter reagents to permit the evaluation of the electron self-exchange rate constant, k11. The latter value has also been determined independently from NMR line-broadening experiments. The cumulative data are consistent with a value of k11 = 1 x 10(5) M(-1) s(-1), ranking this among the fastest-reacting CuII/I systems, on a par with the blue copper proteins known as cupredoxins. The resolved crystal structures show that the geometry of the CuIIL and CuIL complexes are nearly identical, both exhibiting a five-coordinate square pyramidal geometry with the central sulfur donor atom occupying the apical site. The most notable geometric difference is a puckering of an ethylene bridge between two sulfur donor atoms in the CuIL complex. Theoretical calculations suggest that the reorganizational energy is relatively small, with the transition-state geometry more closely approximating the geometry of the CuIIL ground state. The combination of a nearly constant geometry and a large self-exchange rate constant implies that this CuII/I redox system represents a true geometric "entatic state."
- 29 March 2007
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 129 (16) , 5217-5227
A Definitive Example of a Geometric “Entatic State” Effect: Electron-Transfer Kinetics for a Copper(II/I) Complex Involving A Quinquedentate Macrocyclic Trithiaether−Bipyridine Ligand
The quinquedentate macrocyclic ligand cyclo-6,6'-[1,9-(2,5,8-trithianonane)]-2,2'-bipyridine ([15]aneS3bpy = L), containing two pyridyl nitrogens and three thiaether sulfurs as donor atoms, has been synthesized and complexed with copper. The CuII/IL redox potential, the stabilities of the oxidized and reduced complex, and the oxidation and reduction electron-transfer kinetics of the complex reacting with a series of six counter reagents have been studied in acetonitrile at 25 degrees C, mu = 0.10 M (NaClO4). The Marcus cross relationship has been applied to the rate constants obtained for the reactions with each of the six counter reagents to permit the evaluation of the electron self-exchange rate constant, k11. The latter value has also been determined independently from NMR line-broadening experiments. The cumulative data are consistent with a value of k11 = 1 x 10(5) M(-1) s(-1), ranking this among the fastest-reacting CuII/I systems, on a par with the blue copper proteins known as cupredoxins. The resolved crystal structures show that the geometry of the CuIIL and CuIL complexes are nearly identical, both exhibiting a five-coordinate square pyramidal geometry with the central sulfur donor atom occupying the apical site. The most notable geometric difference is a puckering of an ethylene bridge between two sulfur donor atoms in the CuIL complex. Theoretical calculations suggest that the reorganizational energy is relatively small, with the transition-state geometry more closely approximating the geometry of the CuIIL ground state. The combination of a nearly constant geometry and a large self-exchange rate constant implies that this CuII/I redox system represents a true geometric "entatic state."