CACatherine Annen

Catherine Annen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Catherine Annen has a total of 124 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Stealth pressurisation of boiling magma limits geodetic detectability of volcanic eruptions

    by Gregor Weber, Juliet Biggs, Alain Burgisser, Catherine Annen

  • Open Access

    Assembly duration, cooling kinetics and textural maturation of a small-sized granite pluton

    by Nicolas Esteves, Lydéric France, Catherine Annen, Pierre Bouilhol, Marian Holness

    Felsic igneous plutons dominate Earth’s upper continental crust, yet their assembly dynamics and magma solidification kinetics remain poorly constrained. To advance on these issues, we investigated the hypabyssal ~760 m thick Beauvoir granite (France) which was emplaced as a series of 18 stacked magma sheets. Using thermo-kinetic simulations consistent with petrological and microstructural observations, here we show that the composite pluton was emplaced and solidified over ~10 kyr, with an average volumetric construction rate ranging from ~2.1.10-4 to ~3.4.10-2 km3.yr-1. Individual magma sheet solidification times ranged from decades to millennia. Rapid magma solidification resulted in disequilibrium three-grain junction geometries, while localised skeletal crystal habits bear witness to an early period of high magma undercooling related to sill emplacement. Our results highlight the value of integrating thermal modelling with microstructural observations to reconstruct magma storage histories, and extend the use of dihedral angles to felsic magmas, offering a new tool for probing solidification dynamics in granitic systems.

  • Open Access

    Flow and deformation of crystal mush constrained by magnetic fabrics analysis

    by Matěj Machek, Zuzana Roxerová, Vladimír Kusbach, Anne Schöpa, Michel de Saint Blanquat, Catherine Annen, Jon Blundy, Anna Vávrová

    Magmatic crystal mushes are porous crystal-rich frameworks containing interstitial melt that play a fundamental role in crustal differentiation by controlling magma storage and transport, and the structural evolution of active orogens. However, reconstructing deformation history remains challenging because magmatic fabrics are commonly cryptic at the outcrop scale. Here, we integrate field mapping, microstructural analysis, and anisotropy of magnetic susceptibility analysis to reconstruct the deformation history of the Lago della Vacca (Adamello Batholith, Italy) crystal mush. Microstructural indicators demonstrate that the body was emplaced and deformed as a highly crystalline mush during a prolonged submagmatic stage. Anisotropy of magnetic susceptibility records in the body a composite fabric resulting from the superposition, transposition, and interaction of multiple subfabrics, including feldspar alignment fabrics, micro-shear zones and melt segregation structures. Conceptual tensor-mixing models confirm that high magnetic anisotropy and characteristic magnetic fabric parameters and clustering types result from interference between subfabric populations. Spatial variations in magnetic fabrics reveal a systematic rheological transition across the intrusion. The pluton core is characterized by fabrics recording heterogeneity during intrusive flow, while the marginal domains record progressive flattening due to horizontal compaction associated with radial expansion of the intrusion. These results demonstrate that detailed analysis of magnetic fabrics provides a powerful means of resolving cryptic, polyphase deformation within dynamic crystal mush systems.

  • Open Access

    Assembly duration, cooling kinetics and associated microstructures of a small sized granite pluton

    by Nicolas Esteves, Lydéric France, Catherine Annen, Pierre Bouilhol, Marian Holness

    The duration of igneous body assembly controls the thermal evolution of magmatic systems and the spatial distribution of melt during incremental construction. Thermal simulations can be used to reconstruct magma storage histories by providing strong constraints on emplacement duration, melt fraction distribution, and cooling rates. In parallel, rock microstructures (mineral morphologies, crystallisation sequences, and dihedral angles at three-grain junctions) record information on magma solidification kinetics. In particular, dihedral angles can be used to constrain magma cooling-rate variations when combined with thermal modelling.To better understand the assembly dynamics and magma solidification kinetics in small and highly differentiated granites, we investigated the 900 m thick, incrementally emplaced Beauvoir rare-metal granite (Central Massif, France), which is composed of 18 sills identified through Li-mica (lepidolite) compositional variations. Numerical simulations of pluton construction were performed by sequentially emplacing sills once the reservoir cooled below a critical temperature. The results suggest that ~10 kyr elapsed between emplacement of the first sill and complete solidification of the system, with an averaged construction rate as low as 10-4 km3.yr-1. The solidification times of individual sills ranged from tens to thousands of years. Rapid magma solidification resulted in disequilibrium three-grain junction geometries, while localised skeletal crystal habits bear witness to an early period of high magma undercooling related to sill emplacement. Our results highlight the value of integrating thermal modelling with microstructural observations to reconstruct magma storage histories, and extend the use of dihedral angles to felsic magmas, offering a new tool for probing solidification dynamics in granitic systems.

  • Open Access

    Comment on egusphere-2025-3036

    by Catherine Annen

    We present a 2D numerical modelling study aimed at exploring magma-rock interaction following the emplacement of a magmatic sill into cold shallow crust. An interface-tracking solver was developed, based on the open-source OpenFOAM package that enables simulation of heat and momentum transfer between magmas of different compositions, with contrasting densities, thermal properties, temperatures, crystal contents, and strain-rate dependent viscosities. Two scenarios are considered to reconstruct sharp temperature gradients and explain the presence of fresh rhyolitic fragments excavated from approximately 2 km depth during IDDP-1 drilling at Krafla caldera in 2009: partial melting of felsic crust triggered by either (1) a 300 m thick rhyolite intrusion or (2) a 100 m thick basalt sill. We also assume two possible magma emplacement periods: during the Krafla Fires (1975–1984, ~35 years before drilling) and the Myvatn Fires (1724–1729, ~300 years before drilling). In scenario (1), vigorously convective molten rhyolite produces a temperature jump (400 °C) over approximately 25 meters (~16 °C/m) 35 years after emplacement. After 300 years, the thickness of these molten rocks reaches approximately 75 m, however, the thermal gradient becomes too small (less than 5 °C/m) to explain the IDDP-1 observations. In scenario (2), because of large density contrasts between the injected basaltic magma and molten rhyolite, two separate convective layers are formed. The thickness of molten rocks exceeds 30 m after 30 years. The rapid melting front propagation causes a sharp temperature gradient in the undisturbed rocks (28 °C/m). We conclude that the second scenario provides a more reliable explanation for the existing data and is well supported by previous petrological studies. By comparing with a simplified 1D thermal model and performing parametric tests, we argue that our numerical approach is suitable for studying magmatic convection at such extremely high Rayleigh and Prandtl numbers.

  • A complex system approach to magmatism

    by Catherine Annen, Roberto F. Weinberg, Jean-François Moyen, Rémy Cazabet


  • Open Access

    Eruption triggering

    by Virginie Pinel, Catherine J Annen, Atsuko Namiki, Pablo Samaniego, Gilles Seropian, Steve Sparks, Yan Zhan

    Volcanic systems behave episodically and require mechanisms for magma segregation, instability and ascent. Here, we discuss the processes that promote the ascent of magma to the Earth's surface and prepare the onset of an eruption, thus acting as triggers, as well as the factors that prevent eruption. We describe the various petrological, geochemical and geophysical observations that reveal the triggering processes and events. Based on emerging concepts of magma plumbing systems, we consider the mechanisms involved, the buoyancy and overpressure of magmas and associated fluids, using modelling approaches. The transient increase in magma inflow at depth, leading to magma recharge at shallow levels, and the increase in volatile content during ascent are key ingredients of internal triggering. Events, such as earthquakes, changes in surface loading and interactions with external water and hydrothermal systems, perturb the stress field, change magma and fluid pressures to act as external triggers.

  • Open Access

    Assembly duration, cooling kinetics and associated microstructures of a small sized granite pluton

    by Nicolas Esteves, Lydéric France, Pierre Bouilhol, Catherine Annen, Marian Holness

    The duration of assembly of igneous bodies controls the thermal evolution of the system, which in turn controls the spatial distribution of melt throughout the incremental construction. A preliminary method to reconstruct temporal evolution of magma storage within a reservoir is to perform thermal simulations from which the magmatic activity duration, melt fraction distribution and magma cooling rates can be quantified. In addition, rock microstructures (i.e., mineral morphologies, crystallisation sequence and dihedral angle at three-grain junctions) also carry important information on kinetics of magma solidification. In particular, the geometry of these dihedral angles can be used to decode magma cooling rates variations through an igneous body and, in combination with thermal simulations, provide valuable information on both emplacement and magma solidification kinetics.We studied the 900 m thick incrementally-emplaced Beauvoir rare-metal granite (Central Massif, France) in which the size and sequence of intrusion of the 18 individual sills have recently been recognised from compositional variations of Li-mica (i.e., lepidolite). The construction of the composite Beauvoir intrusion was numerically simulated, with each successive sill emplaced once the entire reservoir cooled below a critical temperature. Resulting values in emplacement rates are therefore linked to the chosen value of critical temperature. These simulations indicate that ~10 kyr likely elapsed between the emplacement of the first sill and the solidification of the last droplet of melt. The solidification time for each sill ranges from tens to thousands of years; this duration progressively increases during pluton construction. In such configurations, the magma cooling rate, and in particular that of the marginal regions of each sill, is high (e.g., >0.1 °C.yr-1), resulting in a disequilibrium geometry of three-grain junctions involving two grains of plagioclase and one of lepidolite (measured at the edges of the platy lepidolite grains). These dihedral angles (Θlpp) have median and standard deviation values slightly lower than would be expected from an impingement texture. This evidence of early and rapid crystal growth under diffusion-limited conditions following a sill injection is supported by the presence of skeletal cores in lepidolite as well as plagioclase hopper-like morphologies.This study demonstrates the power of a combined approach, using both thermal simulations, and rock microstructures to reconstruct the Beauvoir pluton assembly and to extract information about solidification kinetics through time. As the application of dihedral angles has so far been limited to mafic magmas, this study unpicks the use of dihedral angles in felsic magmas, opening up perspectives for their use to better understand magma storage and solidification kinetics in felsic bodies.

  • Open Access

    Linking long-term magma evolution and short-term volcano deformation 

    by Gregor Weber, Juliet Biggs, Catherine Annen

    Volcanoes often change shape over timescales of months to decades, and such signals are likely influenced by the long-term physical evolution of magmatic systems over hundreds of thousands to millions of years. The link between these different timescales is often overlooked. In this presentation, I will show how volcanic surface deformation in response to a sudden overpressure at depth evolves over the long-term history of magmatic systems. To do this, I integrate thermal models of large-scale magma system evolution with thermo-mechanical simulations of surface deformation. We examined how changes in magma flux, magmatism duration over hundreds of thousands of years, and the depth of an overpressure source impact post-injection viscoelastic surface movement over a 10-year period. Our findings show that the duration of the long-term magmatic activity and magma supply rate significantly affect surface deformation over timescales of years. The results show that due to thermal heterogeneity in the crust, asymmetrical patterns of surface deformation can emerge in time due to viscoelastic processes, potentially similar to temporal patterns of magma movement. When uplift originates from deep sources (around 10 or 15 km below the surface), deformation follows a consistent uplift trend, dissipating within a few years with little dependence on past magma flux or system lifespan. Conversely, shallow sources (around 5 km below) display a strong dependence on long-term magma supply rate and system lifespan, resulting in distinct patterns of post-intrusive subsidence and subsequent uplift for colder magma systems, or exclusive uplift for hotter and longer-lived systems. These findings align exceptionally well with the deformation behaviour and geophysical tomography at Tullu Moye and Aluto volcanoes in the East Africa Rift. In conclusion, understanding how long-term magmatic processes interact with short-term volcano deformation is crucial for interpreting signals of volcanic unrest.

  • Open Access

    How H2O transport and trapping affect the dynamics of magmatic systems from melt generation to eruption triggering

    by Catherine Annen, Roberto Weinberg, Virginie Pinel, Alain Burgisser

    H2O and other volatiles play a major role in the dynamics of magmatic systems from magma source to volcanic eruption. At the source, H2O facilitates melting and within the crust, H2O fluxing of hot rocks favours the formation and stabilisation of magma mush. H2O dissolved in melt lowers its viscosity and density and thus helps melt extraction and transport. H2O exsolution during magma transport causes crystallisation and stalling of the magma, while further exsolution in a crystallizing magma chamber increases pressure on the chamber walls and facilitates chamber failure and eruption. During the magma final journey towards the surface, formation and expansion of bubbles fragment the magma, increasing the explosivity of the volcanic eruption.We have developed numerical simulations that model flux melting in the deep crust, and other simulations that model H2O exsolution in a growing and crystallising magma chamber in the upper crust. A parameter that is crucial in both processes is the permeability of the magma, mush, and solid rocks through which H2O is moving.Our flux melting models show that due to complex interactions between the effect of H2O and heat, the amount of melt produced by flux melting depends on how fast H2O is transferred relative to heat. By absorbing latent heat, H2O flux melting decreases temperatures and promotes heat transfer in the melting areas. The extent of the melting region depends on the competition between the transfer of H2O, which induces melting and cooling, and the transfer of heat that smooths temperature anomalies. The amount of crustal melting also depends on permeabilities contrast. The presence of an impermeable layer above a more permeable layer increases the production of melt by trapping H2O in the permeable layer.The ease of transfer of exsolved H2O within a crystallising magma body depends on crystal fractions. Our models of magma chambers growth and solidification show that preferential transfer of H2O through the mush that surrounds a magma chamber results in the formation of H2O layers at the top the mush and in the chamber’s roof. If the permeability of the country rocks is low, the H2O layers grow, their buoyancy increases, and the pressure eventually exceeds the yield strength of the country rock and causes fracturing. Depending on how well the H2O layers connect to the liquid magma in the chamber below, fracturing of the country rock can result either in the release of H2O only and possibly causes a bradyseismic crisis, or in the release of H2O, mush, and magma, and triggers a crystal-rich eruption.We know from volcano degassing and from petrological data that magmas are rich in H2O. However, our knowledge of how this H2O is transferred from magmas and through the crust is limited. This knowledge is important though as our simple numerical models indicate that the modalities of H2O transport and accumulation strongly affect the dynamics of a magmatic system.