Anindita Chatterjee
Research Subjects
Anindita Chatterjee has a total of 105 co-authors. Here are the top co-authors by number of shared publications:
- Amiya Priyam
Department of Chemistry, Central University of South Bihar, Gaya, India
8 shared publications Abhijit Saha
UGC DAE Consortium for Scientific Research Kolkata Centre: University Grants Commission Department of Atomic Energy Consortium for Scientific Research Kolkata Centre
7 shared publications- Guthikonda Kiran Kumar
Physik Institut der Universität Zürich
6 shared publications Subhash C. Bhattacharya
Department of Chemistry, Jadavpur University, Kolkata 700032, India
5 shared publicationsVenu Kandula
Department of Chemistry Koneru Laksmaiah Education Foundation Vaddeswaram, Guntur, Andhra Pradesh India 522502
5 shared publicationsSatyanarayana Yennam
Chemistry Services, GVK Biosciences Pvt. Ltd
4 shared publications
Latest Publications
- 19 July 2026
- Published by Taylor & Francis in Materials Research Innovations
- Vol. 30 (7) , 739-748
Efficient photodegradation of carcinogenic organic pollutants using MPA‑capped ZnSe quantum dots: a comprehensive study
In recent years, the rapid expansion of commercial enterprises has greatly contributed to the deterioration of environmental quality, making it a critical concern for modern society. One major aspe...
- 19 July 2026
- Published by Taylor & Francis in Materials Research Innovations
- Vol. 30 (7) , 739-748
Efficient photodegradation of carcinogenic organic pollutants using MPA‑capped ZnSe quantum dots: a comprehensive study
In recent years, the rapid expansion of commercial enterprises has greatly contributed to the deterioration of environmental quality, making it a critical concern for modern society. One major aspe...
- Open Access
- 16 August 2024
- Published by Frontiers Media SA in Frontiers in Nanotechnology
- Vol. 6, 1433591
Zinc chalcogenide nanostructures: synthesis methodologies and applications—a review
Zinc chalcogenide nanostructures are an important class of non-toxic nanomaterials due to their biocompatible nature, surface flexibility, high degree of crystallinity, and high photoluminescence efficiency that makes them applicable in solar cells biosensors, photocatalysts, LEDs, and electroluminescence materials. There are various methods for synthesizing zinc chalcogenides, including ZnS, ZnSe, and ZnTe, through colloidal, hydrothermal, solvothermal, microwave, and core shell synthesis to prepare highly luminescent material for drug delivery and biomedical applications. The main focus of this review is to explore various synthetic approaches to tune the morphology, size, and surface properties of zinc-based chalcogenide nanostructures, revealing their potential as biocompatible quantum dots. Despite their advantages, zinc chalcogenides also have certain drawbacks, such as low mechanical strength, limited bandgap tunability, and less thermal stability, that can point the way for future research. Thus, this review may prove beneficial for developing and designing more advanced nanomaterials based on existing knowledge, protocols, and strategies.
- 16 August 2024
- Published by Frontiers Media SA in Frontiers in Nanotechnology
- Vol. 6, 1433591
Open AccessZinc chalcogenide nanostructures: synthesis methodologies and applications—a review
Zinc chalcogenide nanostructures are an important class of non-toxic nanomaterials due to their biocompatible nature, surface flexibility, high degree of crystallinity, and high photoluminescence efficiency that makes them applicable in solar cells biosensors, photocatalysts, LEDs, and electroluminescence materials. There are various methods for synthesizing zinc chalcogenides, including ZnS, ZnSe, and ZnTe, through colloidal, hydrothermal, solvothermal, microwave, and core shell synthesis to prepare highly luminescent material for drug delivery and biomedical applications. The main focus of this review is to explore various synthetic approaches to tune the morphology, size, and surface properties of zinc-based chalcogenide nanostructures, revealing their potential as biocompatible quantum dots. Despite their advantages, zinc chalcogenides also have certain drawbacks, such as low mechanical strength, limited bandgap tunability, and less thermal stability, that can point the way for future research. Thus, this review may prove beneficial for developing and designing more advanced nanomaterials based on existing knowledge, protocols, and strategies.
- 2 January 2024
- Published by Springer Nature in Chemical Papers
- Vol. 78 (4) , 2301-2311
Photodegradation of toxic malachite green dye by ZnO and ZnO/SiO2 nanocomposites under solar radiation: a green practice
- 2 January 2024
- Published by Springer Nature in Chemical Papers
- Vol. 78 (4) , 2301-2311
Photodegradation of toxic malachite green dye by ZnO and ZnO/SiO2 nanocomposites under solar radiation: a green practice
- Open Access
- 5 June 2023
- Published by Springer Nature in Research Square
Photodegradation of toxic Malachite Green dye by ZnO and ZnO/SiO2 nanocomposites under Solar Radiation –a green practice
ZnO/SiO2 nanocomposites (NCs) have been prepared and evaluated in decomposing carcinogenic malachite green (MG)) under collected sunlight using parabolic solar collector. ZnO/SiO2 NCs and ZnO nanoparticles (NPs) were characterized by X-ray diffraction (XRD), Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and UV-Visible spectroscopy. XRD provides the structure of ZnO NPs as Hexagonal Wurzite with particle diameters in the range of 14–18 nm and nanocomposites are in the range of 14–19 nm. The average particle size estimated from TEM images was 17 for ZnO NPs and 21 nm for NCs. The band gap energy value is 3.30 eV for NCs, red shifted as compared to bulk ZnO (3.37 eV). BET surface area measurement shows microporous structure and increase in surface area for nanocomposites. Kinetic studies reveal pseudo first order reaction with faster photodecomposition for nanocomposites at optimum catalyst concentration of 0.5 gm/100ml at neutral pH. The maximum photodegradation efficiency reached up to 98.8% for ZnO/SiO2 NCs and 96.8% for ZnO NPs within just 40 minutes under collected sunlight irradiation. We have achieved 40% enhancement in photodegradation efficiency using solar collector as compared to natural sunlight. This study establishes the increase in photodegradation efficiency of ZnO/SiO2 nanocomposites as heterogeneous photocatalyst utilizing collection of solar energy as a renewable resource in a cost effective manner.
- 5 June 2023
- Published by Springer Nature in Research Square
Open AccessPhotodegradation of toxic Malachite Green dye by ZnO and ZnO/SiO2 nanocomposites under Solar Radiation –a green practice
ZnO/SiO2 nanocomposites (NCs) have been prepared and evaluated in decomposing carcinogenic malachite green (MG)) under collected sunlight using parabolic solar collector. ZnO/SiO2 NCs and ZnO nanoparticles (NPs) were characterized by X-ray diffraction (XRD), Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and UV-Visible spectroscopy. XRD provides the structure of ZnO NPs as Hexagonal Wurzite with particle diameters in the range of 14–18 nm and nanocomposites are in the range of 14–19 nm. The average particle size estimated from TEM images was 17 for ZnO NPs and 21 nm for NCs. The band gap energy value is 3.30 eV for NCs, red shifted as compared to bulk ZnO (3.37 eV). BET surface area measurement shows microporous structure and increase in surface area for nanocomposites. Kinetic studies reveal pseudo first order reaction with faster photodecomposition for nanocomposites at optimum catalyst concentration of 0.5 gm/100ml at neutral pH. The maximum photodegradation efficiency reached up to 98.8% for ZnO/SiO2 NCs and 96.8% for ZnO NPs within just 40 minutes under collected sunlight irradiation. We have achieved 40% enhancement in photodegradation efficiency using solar collector as compared to natural sunlight. This study establishes the increase in photodegradation efficiency of ZnO/SiO2 nanocomposites as heterogeneous photocatalyst utilizing collection of solar energy as a renewable resource in a cost effective manner.
- 24 April 2023
- Published by Elsevier in Journal of the Indian Chemical Society
- Vol. 100 (6)
A constructive synthetic approach for reduction of nitro heterocyclics- characterization and degradation studies
- 24 April 2023
- Published by Elsevier in Journal of the Indian Chemical Society
- Vol. 100 (6)
A constructive synthetic approach for reduction of nitro heterocyclics- characterization and degradation studies
- 1 December 2021
- Published by Elsevier in Journal of the Indian Chemical Society
- Vol. 98 (12)
Aqueous synthesis of mercaptopropionic acid capped ZnSe QDs and investigation of photoluminescence properties with metal doping
- 1 December 2021
- Published by Elsevier in Journal of the Indian Chemical Society
- Vol. 98 (12)
Aqueous synthesis of mercaptopropionic acid capped ZnSe QDs and investigation of photoluminescence properties with metal doping
- 27 August 2021
- Published by Wiley in Journal of Physical Organic Chemistry
- Vol. 34 (12) , e4276
New indolo[1,2‐c]quinazolines for single‐crystal field‐effect transistor: A united experimental and theoretical studies
Here, we account the synthesis and characterization of a series of symmetrical fused heterocyclic aromatic hydrocarbons (HAHs) with an indolo[1,2‐c]quinazoline (IQ) as the core moiety. All the new HAHs IQ series were systematically investigated by using various spectroscopic methods. Furthermore, their photo‐physical properties were supported by density functional theory (DFT) and time‐dependent density functional theory (TDDFT) studies to support the experimental findings. The tetramethyl‐substituted indolo[1,2‐c]quinazoline (TMIQ) compound is shown to exhibit the shifted type of π–π stacking interactions, which render this series as a new semiconducting material. Single‐crystal‐based field‐effect transistor devices of TMIQ exhibited efficient charge transport behavior, giving a p‐channel field‐effect mobility of 0.25 cm2 V−1 s−1 with an on/off ratio of 5 × 105.
- 27 August 2021
- Published by Wiley in Journal of Physical Organic Chemistry
- Vol. 34 (12) , e4276
New indolo[1,2‐c]quinazolines for single‐crystal field‐effect transistor: A united experimental and theoretical studies
Here, we account the synthesis and characterization of a series of symmetrical fused heterocyclic aromatic hydrocarbons (HAHs) with an indolo[1,2‐c]quinazoline (IQ) as the core moiety. All the new HAHs IQ series were systematically investigated by using various spectroscopic methods. Furthermore, their photo‐physical properties were supported by density functional theory (DFT) and time‐dependent density functional theory (TDDFT) studies to support the experimental findings. The tetramethyl‐substituted indolo[1,2‐c]quinazoline (TMIQ) compound is shown to exhibit the shifted type of π–π stacking interactions, which render this series as a new semiconducting material. Single‐crystal‐based field‐effect transistor devices of TMIQ exhibited efficient charge transport behavior, giving a p‐channel field‐effect mobility of 0.25 cm2 V−1 s−1 with an on/off ratio of 5 × 105.
- 27 February 2020
- Published by Springer Nature in Journal of the Iranian Chemical Society
- Vol. 17 (7) , 1545-1553
Iodine mediated a simple strategy for the synthesis of β,γ-unsaturated-α-ketoesters and its application for the synthesis of 4,5-dihydropyrazole derivatives
- 27 February 2020
- Published by Springer Nature in Journal of the Iranian Chemical Society
- Vol. 17 (7) , 1545-1553
Iodine mediated a simple strategy for the synthesis of β,γ-unsaturated-α-ketoesters and its application for the synthesis of 4,5-dihydropyrazole derivatives
- 5 February 2020
- Published by IOP Publishing in Physica Scripta
- Vol. 95 (3) , 035806
Synthesis and optical properties of Mn-doped CaWO 4 nanoparticles
Pure and Mn-doped calcium tungstate (Mn:CaWO 4 ) nanoparticles (NPs) were synthesized by hydrothermal method which lead to the formation of high quality and narrow sized particles. The concentration of Mn in CaWO 4 NPs was varied from 1% to 4% by weight. A distinct peak of Mn ( d–d) transition was observed which is actually spin-forbidden but may be allowed due to crystal field effects. Electron spin resonance measurements revealed inclusion of Mn 2+ at the substitutional site.. Room temperature photoluminescence emission (PL) and excitation (PLE) spectroscopies were carried out to understand the interactions of sp-d levels. PL spectra revealed the presence of both band-edge (∼450 nm) and Mn 2+ related orange luminescence (∼530 nm). Time dependent photoluminescence (TDPL) studies were also carried out where the life time value of 4.3 ms obtained was in accordance with measurement for Mn in other systems. Thus TDPL further strengths the presence of Mn in 2+ state in CaWO 4 NPs.
- 5 February 2020
- Published by IOP Publishing in Physica Scripta
- Vol. 95 (3) , 035806
Synthesis and optical properties of Mn-doped CaWO 4 nanoparticles
Pure and Mn-doped calcium tungstate (Mn:CaWO 4 ) nanoparticles (NPs) were synthesized by hydrothermal method which lead to the formation of high quality and narrow sized particles. The concentration of Mn in CaWO 4 NPs was varied from 1% to 4% by weight. A distinct peak of Mn ( d–d) transition was observed which is actually spin-forbidden but may be allowed due to crystal field effects. Electron spin resonance measurements revealed inclusion of Mn 2+ at the substitutional site.. Room temperature photoluminescence emission (PL) and excitation (PLE) spectroscopies were carried out to understand the interactions of sp-d levels. PL spectra revealed the presence of both band-edge (∼450 nm) and Mn 2+ related orange luminescence (∼530 nm). Time dependent photoluminescence (TDPL) studies were also carried out where the life time value of 4.3 ms obtained was in accordance with measurement for Mn in other systems. Thus TDPL further strengths the presence of Mn in 2+ state in CaWO 4 NPs.