Rossella Girimonte
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Rossella Girimonte has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
B. Formisani
9 shared publicationsBrunello Formisani
8 shared publications- Vincenzino Vivacqua
Università della Calabria
8 shared publications - Flaviano Testa
Department of Computer Engineering, Modeling, Electronics and Systems, University of Calabria, Via P. Bucci, Cubo 44A, 87036 Rende, CS, Italy
5 shared publications - Alberto Di Renzo
Dimes Department, University of Calabria, 87036 Rende, Italy
3 shared publications - Brunello Formisani
Università della Calabria
3 shared publications
Latest Publications
- Open Access
- 23 October 2026
- Published by MDPI AG in Chemengineering
- Vol. 10 (11) , 132
Cyclic Performance of Amino-Functionalized Silica During Dynamic Adsorption–Desorption in a Confined-Fluidized Bed for CO2 Capture
A confined-fluidized bed was investigated as a dynamic adsorber-regenerator for CO2 capture using amino-functionalized mesoporous silica (APTES20). Adsorption, gas switching, in situ temperature-swing desorption and cooling were repeated in the same reactor without sorbent transfer. In one 68-cycle series, the fitted adsorption-capacity trend decreased by approximately 1.5%; individual-cycle scatter and the absence of independent replicate series limit inference about long-term material lifetime. The results demonstrate cyclic operation over the tested window, not industrial-scale durability.
- 23 October 2026
- Published by MDPI AG in Chemengineering
- Vol. 10 (11) , 132
Open AccessCyclic Performance of Amino-Functionalized Silica During Dynamic Adsorption–Desorption in a Confined-Fluidized Bed for CO2 Capture
A confined-fluidized bed was investigated as a dynamic adsorber-regenerator for CO2 capture using amino-functionalized mesoporous silica (APTES20). Adsorption, gas switching, in situ temperature-swing desorption and cooling were repeated in the same reactor without sorbent transfer. In one 68-cycle series, the fitted adsorption-capacity trend decreased by approximately 1.5%; individual-cycle scatter and the absence of independent replicate series limit inference about long-term material lifetime. The results demonstrate cyclic operation over the tested window, not industrial-scale durability.
- Open Access
Comparative Screening of MDEA, TSA and PSA/VPSA for CO2 Capture Upstream of Artificial Photosynthesis
Capturing CO2 upstream of artificial photosynthesis is worthwhile only if the utility emissions of the capture step do not offset the captured mass. This study compares 30 wt% methyldiethanolamine (MDEA) absorption, temperature swing adsorption (TSA) and pressure/vacuum pressure swing adsorption (PSA/VPSA) on zeolite 13X for a pretreated dry feed containing 35 mol% CO2, combining process simulation, energy analysis, gate-to-gate life-cycle assessment (LCA) and an operating-expenditure (OPEX) screen per kilogram of captured CO2. MDEA achieved 95% recovery and approximately 95% wet-product purity with 3.96 MJ kg−1 of regeneration heat and a climate impact of 0.712 kg CO2-eq kg−1. Raising the TSA regeneration temperature from 383 to 450 K increased recovery from 80.5% to 94.5% and purity from 91.0% to 95.5%, but also heat demand (from 6.78 to 7.75 MJ kg−1) and climate impact (from 0.964 to 1.100 kg CO2-eq kg−1). PSA/VPSA at 3 bar feed and 0.11 bar evacuation gave the lowest climate impact (0.294 kg CO2-eq kg−1) and OPEX (approximately €0.100 kg−1), with 88.9% recovery and 92.8% purity. The ranking applies to the dry, CO2-enriched feed and the European utility mix considered; untreated flue gas, other solvents and full-chain conversion require separate assessment.
Open AccessComparative Screening of MDEA, TSA and PSA/VPSA for CO2 Capture Upstream of Artificial Photosynthesis
Capturing CO2 upstream of artificial photosynthesis is worthwhile only if the utility emissions of the capture step do not offset the captured mass. This study compares 30 wt% methyldiethanolamine (MDEA) absorption, temperature swing adsorption (TSA) and pressure/vacuum pressure swing adsorption (PSA/VPSA) on zeolite 13X for a pretreated dry feed containing 35 mol% CO2, combining process simulation, energy analysis, gate-to-gate life-cycle assessment (LCA) and an operating-expenditure (OPEX) screen per kilogram of captured CO2. MDEA achieved 95% recovery and approximately 95% wet-product purity with 3.96 MJ kg−1 of regeneration heat and a climate impact of 0.712 kg CO2-eq kg−1. Raising the TSA regeneration temperature from 383 to 450 K increased recovery from 80.5% to 94.5% and purity from 91.0% to 95.5%, but also heat demand (from 6.78 to 7.75 MJ kg−1) and climate impact (from 0.964 to 1.100 kg CO2-eq kg−1). PSA/VPSA at 3 bar feed and 0.11 bar evacuation gave the lowest climate impact (0.294 kg CO2-eq kg−1) and OPEX (approximately €0.100 kg−1), with 88.9% recovery and 92.8% purity. The ranking applies to the dry, CO2-enriched feed and the European utility mix considered; untreated flue gas, other solvents and full-chain conversion require separate assessment.
- Open Access
- 2 December 2025
- Published by Elsevier in Chemical Engineering Journal Advances
- Vol. 25
Mixing and segregation behavior of ternary biomass-sand-olivine fluidized bed: detailed comparison between experiments and modelling predictions
- 2 December 2025
- Published by Elsevier in Chemical Engineering Journal Advances
- Vol. 25
Open AccessMixing and segregation behavior of ternary biomass-sand-olivine fluidized bed: detailed comparison between experiments and modelling predictions
- Open Access
Effect of Particle Size on the Biomethanation Kinetics of Mechanically Pretreated Sargassum spp. Biomass
The collection and use of Sargassum spp. as feedstock for the production of valuable products such as biomethane by anaerobic digestion (AD) would mitigate the negative impact of the blooms and the costs related to waste management in the Dominican Republic. In this work, the effect of the particle size of pelagic Sargassum spp. biomass, as a result of mechanical pretreatments, on the biomethanation was determined. The granulometric analysis of the mechanically pre-treated biomass was carried out using a Mastersize2000. The Biochemical Methane Potential (BMP) of the samples was determined using an Automatic Potential System Test II (AMPTS® II). The kinetic parameters of the reaction were scientifically evaluated by using First order kinetic Model and modified Gompertz Model. The granulometric analysis showed a monomodal distribution on crushed biomass (505 µm) and a bimodal distribution on the milling sample (107 µm). The bimodal biomass means the biomass is characterized by the presence of fine and large particles. We observed that BMP increased by 78.85% when particles were reduced from 50,000 µm to 505 µm and by 73.61% when particles were reduced from 50,000 µm to 107 µm. A low methane yield from the milling biomass (107 µm) compared to the crushed biomass (505 µm) could be related to the excessive reduction of particle size. The fine particles are subject to the formation of aggregates and consequently, the contact area between the algae cells and the microorganisms that operate the anaerobic digestion process decreases.
Open AccessEffect of Particle Size on the Biomethanation Kinetics of Mechanically Pretreated Sargassum spp. Biomass
The collection and use of Sargassum spp. as feedstock for the production of valuable products such as biomethane by anaerobic digestion (AD) would mitigate the negative impact of the blooms and the costs related to waste management in the Dominican Republic. In this work, the effect of the particle size of pelagic Sargassum spp. biomass, as a result of mechanical pretreatments, on the biomethanation was determined. The granulometric analysis of the mechanically pre-treated biomass was carried out using a Mastersize2000. The Biochemical Methane Potential (BMP) of the samples was determined using an Automatic Potential System Test II (AMPTS® II). The kinetic parameters of the reaction were scientifically evaluated by using First order kinetic Model and modified Gompertz Model. The granulometric analysis showed a monomodal distribution on crushed biomass (505 µm) and a bimodal distribution on the milling sample (107 µm). The bimodal biomass means the biomass is characterized by the presence of fine and large particles. We observed that BMP increased by 78.85% when particles were reduced from 50,000 µm to 505 µm and by 73.61% when particles were reduced from 50,000 µm to 107 µm. A low methane yield from the milling biomass (107 µm) compared to the crushed biomass (505 µm) could be related to the excessive reduction of particle size. The fine particles are subject to the formation of aggregates and consequently, the contact area between the algae cells and the microorganisms that operate the anaerobic digestion process decreases.
- Open Access
- 3 November 2023
- Published by MDPI AG in Separations
- Vol. 10 (11) , 558
Evaluation of CO2 Adsorption Parameters in Fluidised Zeolite 13X Beds Using Non-Linear Multivariate Optimisation
This work is part of a research project aimed at studying potential sorbents for CO2 capture. The main parameters characterising the adsorption process of zeolite 13X were derived with the aim of overcoming the limits of experimental analysis and thus predicting the performances of the materials of interest. In particular, the main parameters that control the adsorption process of CO2 in zeolite 13X were evaluated through parametric optimisation. This systematic procedure allows for the prediction of the performances of the materials at different operating conditions, identifying the most suitable ones for the case under consideration. Another important application lies in the possibility of a preliminary study of a potential process scale-up for future industrial use. The captured carbon dioxide can be stored or used as a reagent in the production of products with higher economic values, such as methanol, DME and others.
- 3 November 2023
- Published by MDPI AG in Separations
- Vol. 10 (11) , 558
Open AccessEvaluation of CO2 Adsorption Parameters in Fluidised Zeolite 13X Beds Using Non-Linear Multivariate Optimisation
This work is part of a research project aimed at studying potential sorbents for CO2 capture. The main parameters characterising the adsorption process of zeolite 13X were derived with the aim of overcoming the limits of experimental analysis and thus predicting the performances of the materials of interest. In particular, the main parameters that control the adsorption process of CO2 in zeolite 13X were evaluated through parametric optimisation. This systematic procedure allows for the prediction of the performances of the materials at different operating conditions, identifying the most suitable ones for the case under consideration. Another important application lies in the possibility of a preliminary study of a potential process scale-up for future industrial use. The captured carbon dioxide can be stored or used as a reagent in the production of products with higher economic values, such as methanol, DME and others.
- Open Access
Amine-Functionalized Mesoporous Silica Adsorbent for CO2 Capture in Confined-Fluidized Bed: Study of the Breakthrough Adsorption Curves as a Function of Several Operating Variables
Carbon capture, utilization, and storage (CCUS) is one of the key promising technologies that can reduce GHG emissions from those industries that generate CO2 as part of their production processes. Compared to other effective CO2 capture methods, the adsorption technique offers the possibility of reducing the costs of the process by setting solid sorbent with a high capacity of adsorption and easy regeneration and, also, controlling the performance of gas-solid contactor. In this work, an amine-functionalized mesoporous sorbent was used to capture CO2 emissions in a confined-fluidized bed. The adoption of a confined environment allows the establishment of a homogeneous expansion regime for the sorbent and allows to improve the exchange of matter and heat between gas and solid phase. The results illustrate how the different concentration of the solution adopted during the functionalization affects the adsorption capacity. That, measured as mg of CO2 per g of sorbent, was determined by breakthrough curves from continuous adsorption tests using different concentrations of CO2 in air. Mesoporous silica functionalized with a concentration of 20% of APTES proves to be the best viable option in terms of cost and ease of preparation, low temperature of regeneration, and effective use for CO2 capture.
Open AccessAmine-Functionalized Mesoporous Silica Adsorbent for CO2 Capture in Confined-Fluidized Bed: Study of the Breakthrough Adsorption Curves as a Function of Several Operating Variables
Carbon capture, utilization, and storage (CCUS) is one of the key promising technologies that can reduce GHG emissions from those industries that generate CO2 as part of their production processes. Compared to other effective CO2 capture methods, the adsorption technique offers the possibility of reducing the costs of the process by setting solid sorbent with a high capacity of adsorption and easy regeneration and, also, controlling the performance of gas-solid contactor. In this work, an amine-functionalized mesoporous sorbent was used to capture CO2 emissions in a confined-fluidized bed. The adoption of a confined environment allows the establishment of a homogeneous expansion regime for the sorbent and allows to improve the exchange of matter and heat between gas and solid phase. The results illustrate how the different concentration of the solution adopted during the functionalization affects the adsorption capacity. That, measured as mg of CO2 per g of sorbent, was determined by breakthrough curves from continuous adsorption tests using different concentrations of CO2 in air. Mesoporous silica functionalized with a concentration of 20% of APTES proves to be the best viable option in terms of cost and ease of preparation, low temperature of regeneration, and effective use for CO2 capture.
- 1 January 2021
- Published by Elsevier in Powder Technology
- Vol. 378, 1-11
Conditioning the fluidization behaviour of a Geldart's B solid at varying temperature by addition of A particles
- 1 January 2021
- Published by Elsevier in Powder Technology
- Vol. 378, 1-11
Conditioning the fluidization behaviour of a Geldart's B solid at varying temperature by addition of A particles
- Open Access
Adsorption of CO2 on Amine-Modified Silica Particles in a Confined-Fluidized Bed
To reduce the anthropogenic CO2 emissions produced from fossil fuel burning plants, the application of carbon capture and storage (CCS) is necessary and development of a more efficient and economically feasible CO2 capture process is essential as an alternative to the conventional amine scrubbing process which uses aqueous amine solutions. CO2 capture can be enhanced by improving both the gas–solid contact efficiency and by tuning a specific high-performance sorbent. The aim of this research is to investigate the adsorption of CO2 using impregnated mesoporous silica in a “confined-fluidized bed”. This non-conventional fluidized bed (sometimes also termed the “packed-fluidized bed”) seems suitable for improving the efficiency of gas–solid processes for which the bypass effect of the gas–solid contact caused by bubbling represents a major drawback. Results, expressed as grams of CO2 adsorbed per kilogram of material, are discussed in terms of amine load in the sorbent, breakthrough time and fraction of bed utilized. The stability of the materials after regeneration cycles is also discussed. The results obtained confirm that the confinement of the bed allows exploiting fluidization technology in adsorption operations. The operating velocity can be fixed at a value at which the thermal effects also connected to the operation are kept under control.
Open AccessAdsorption of CO2 on Amine-Modified Silica Particles in a Confined-Fluidized Bed
To reduce the anthropogenic CO2 emissions produced from fossil fuel burning plants, the application of carbon capture and storage (CCS) is necessary and development of a more efficient and economically feasible CO2 capture process is essential as an alternative to the conventional amine scrubbing process which uses aqueous amine solutions. CO2 capture can be enhanced by improving both the gas–solid contact efficiency and by tuning a specific high-performance sorbent. The aim of this research is to investigate the adsorption of CO2 using impregnated mesoporous silica in a “confined-fluidized bed”. This non-conventional fluidized bed (sometimes also termed the “packed-fluidized bed”) seems suitable for improving the efficiency of gas–solid processes for which the bypass effect of the gas–solid contact caused by bubbling represents a major drawback. Results, expressed as grams of CO2 adsorbed per kilogram of material, are discussed in terms of amine load in the sorbent, breakthrough time and fraction of bed utilized. The stability of the materials after regeneration cycles is also discussed. The results obtained confirm that the confinement of the bed allows exploiting fluidization technology in adsorption operations. The operating velocity can be fixed at a value at which the thermal effects also connected to the operation are kept under control.
- 1 October 2019
- Published by Elsevier in Particuology
- Vol. 46, 67-74
CO2 adsorption in a confined fluidized bed of zeolite pellets: Influence of operating velocity
- 1 October 2019
- Published by Elsevier in Particuology
- Vol. 46, 67-74
CO2 adsorption in a confined fluidized bed of zeolite pellets: Influence of operating velocity