Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aung Ko Ko Kyaw has a total of 380 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Tin‐Based Lead‐Free Perovskite Solar Cells: Mechanisms, Materials, and Device Engineering

    by Soe Moe Khant, Nyein Wink Lwin, Chong Pei Yu, Soe Ko Ko Aung, Aung Ko Ko Kyaw

    Perovskite solar cells (PSCs) have emerged as one of the most promising photovoltaic technologies due to their exceptional optoelectronic properties, low‐cost fabrication, and rapidly rising power conversion efficiency. Despite the impressive performance of lead‐based perovskites, concerns about lead toxicity and environmental instability have spurred intense efforts to develop lead‐free alternatives. Among these, tin (Sn)‐based perovskite solar cells (TPSCs) have shown great potential as eco‐friendly candidates owing to their suitable bandgap and comparable charge‐transport properties. However, the intrinsic instability of Sn 2+ , rapid oxidation to Sn 4+ , and poor film morphology continue to limit their efficiency and long‐ term operational stability. This review systematically explores the unique properties of Sn‐based perovskite materials, the widely used electron‐ and hole‐transport materials in device architectures, and the underlying degradation mechanisms that limit their performance. Furthermore, this review discussed recent progress and emerging strategies aimed at addressing the intrinsic instability of tin‐based systems. Overall, this review provides insights into achieving efficient, stable, and environmentally sustainable 100% lead‐free TPSCs.

  • Adhesive printing of chlorinated acceptor-containing flip-domain photoactive layers for enhanced charge transport in organic photoelectronic devices

    by Jae Hyun Jeong, Huiseong Lee, Min Soo Kim, Jihyun Lim, Du Heon Ha, Emad S. Goda, Ronghui Liu, Aung Ko Ko Kyaw, Dong Hwan Wang

    Adhesive printing of a BHJ layer containing a chlorinated acceptor (BTP-4Cl-16) enables phase separation and an optimized fibrillar morphology, which enhances charge extraction, suppresses noise generation, and ensures stable device performance.

  • Crystallization-controlled phase purification and optical coupling strategy for efficient all-inorganic perovskite-organic tandem solar cells

    by Xiaoyu Gu, Yu Han, Xue Lai, Yizhao Wang, Xiaowei Xu, Chengwei Shan, Feng Yan, Gang Li, Aung Ko Ko Kyaw

  • Rational Design of a Perylene Diimide Cathode Interlayer for Enhanced Signal Detection in Organic Photodetectors

    by Min Soo Kim, Xin Xu, Jihyun Lim, Sheng Ge, Ga Yoon Chae, Erjun Zhou, Aung Ko Ko Kyaw, Dong Hwan Wang

    In this work, we demonstrate a rational cathode interlayer engineering strategy based on a newly designed perylene diimide derivative (PDI3) for high‐sensitivity organic photodetectors (OPDs). Unlike conventional amine‐functionalized cathode interlayers such as PDINN, PDI3 incorporates bulky branched alkyl chains and rigid fluorene units that enable controlled interfacial electronic interactions while maintaining efficient electron extraction. Electronic structure analyses reveal that PDI3 induces a strong interfacial dipole, significantly reducing the work function of the Ag electrode to −3.36 eV. This energy‐level realignment increases the hole‐blocking barrier to 2.32 eV, which effectively controls leakage current and suppresses externally injected holes. In addition, solvent‐dependent wettability and improved film‐forming characteristics of PDI3 lead to more uniform interfacial morphology and reduced trap density, thereby improving interfacial uniformity and signal stability. As a result, the PDI3‐based OPD exhibits a low dark current of 3.63 × 10 −9 A cm −2 and a high detectivity of 1.52 × 10 13 Jones. These findings provide insight into the coupled electronic and morphological roles of CILs, offering design guidelines for high‐sensitivity organic optoelectronic devices.

  • Open Access

    Amphoteric Anion‐Mediated Crystallization and Universal Defect Passivation for High‐Efficiency and Stable Perovskite Solar Cells

    by Aamir Saeed, Xiaowei Xu, Nan Li, Ping‐Ping Sun, Hao Xu, Qin Hu, Zulqarnain Haider, Qingqing Miao, Tahir Imran, Yang Bai, et al.

    Ionic liquids (ILs) have emerged as attractive bulk modifiers for perovskite absorbers in realizing long‐term operational stability; however, most IL anions are chemically “one‐sided”, typically neutralizing only cationic or anionic vacancies. Our study introduces a novel strategy using ILs with amphoteric anions—specifically tetramethylguanidine hydrogen sulfate (GUHS) and tetramethylguanidine dihydrogen phosphate (GUDHP)—to act as “universal passivators”. The amphoteric nature of HSO 4 − and H 2 PO 4 − anions passivate both Lewis acidic and Lewis basic defects via localized electron‐rich oxygen sites and electron‐deficient regions, while the guanidine cation anchor FA + /MA + cations through multiple N─H⋯N bonds, resulting in a high‐quality perovskite film with suppressed defect densities, enhanced crystallization, and relieved residual strain. The passivation effect is more pronounced in GUDHP than in GUHS due to the higher basicity of H 2 PO 4 − ‐derived PO 4 framework and presence of multiple P─OH functionalities. Consequently, the GUDHP‐modified PSCs achieve a PCE of 26.13% with an FF exceeding 85% for normal bandgap (1.56 eV) cells, and a remarkable 20.06% PCE with an impressive 85.74% FF for wide bandgap (1.84 eV) devices. In addition, the GUDHP‐modified devices maintained 93.6% of their initial PCE after 1000 h of continuous operation under the ISOS‐L‐1 protocol.

  • Open Access

    Flanking‐Group Engineering Unlocks Emerging Functionalities in Diketopyrrolopyrrole Semiconductors

    by Xiaoyun Wu, Shanshan Zhou, Meng Li, Aung Ko Ko Kyaw, Xiao‐Lei Shi, Qian Liu

    Diketopyrrolopyrrole (DPP) is a cornerstone building block in high‐performance organic semiconductors, valued for its strong π‐conjugation, chemical robustness, and tunable optoelectronic characteristics. Conventional DPP synthesis relies on aromatic nitrile precursors, establishing a design paradigm in which flanking aromatic units govern energy levels, molecular packing, and charge transport. Although systematic variation of these flanking groups has enabled substantial performance gains, this strategy inherently constrains structural diversity and limits functional adaptability, particularly for emerging technologies requiring flexibility, biointegration, and multimodal responsiveness. Recent advances move beyond this conventional framework by reengineering DPP flanking architectures and molecular topologies. In addition to enabling new functionalities in established material systems, unconventional design strategies, such as naphthalene‐based motifs, vinyl linkages, and fused DPP backbones, have been developed to reshape electronic coupling and intermolecular interactions. These approaches expand DPP functionality beyond traditional transistor and photovoltaic roles toward flexible electronics, intelligent skins, and (bio)sensing platforms. By establishing flanking‐group engineering as a unifying design paradigm, this review provides a coherent structure‐property‐application framework for DPP‐based semiconductors, offering generalizable guidelines for the development of next‐generation multifunctional organic electronics.

  • Bay-position-modified perylene diimide cathode interfacial layer enabling high-performance organic photodetectors

    by Xin Xu, Zongtao Wang, Chengwei Shan, Xiaowei Xu, Tianshuo Zhao, Zhikuan Zhang, Erjun Zhou, Aung Ko Ko Kyaw

    Cathode interfacial layers (CILs) are crucial for improving the performance of organic photodetectors (OPDs). In this work, a bay-position-modified perylene diimide derivative, SePDI3, is employed as an efficient CIL and systematically compared with the conventional CIL material PDINN. SePDI3 exhibits a more pronounced self-doping effect and a stronger capability to modulate the work function of the metal electrode, thereby enabling improved ohmic contact at the active layer/cathode interface. As a result, the OPD based on SePDI3 achieves a responsivity of 0.495 A W −1 and a specific detectivity of 4.34 × 10 13 Jones at 830 nm. In addition, the SePDI3-based device demonstrates a faster photoresponse and a wider linear dynamic range compared with the PDINN-based counterpart. The enhanced performance is attributed to the ability of SePDI3 to facilitate interfacial charge transfer and extraction while suppressing molecular aggregation, thereby forming a smoother interfacial contact. This work proposes a simple and effective molecular design strategy for optimizing the cathode interface and developing high-performance OPDs.

  • Citric Acid‐Inhibited Phase Separation Assists In Situ Growth of Ternary Cationic Perovskite Single Crystal Thin Films Toward Efficient Solar Cells

    by Zhaojin Wang, Min Liao, Chengwei Shan, Xiao Duan, Qingqian Wang, Dengfeng Luo, Yuqi Wang, Fumin Lu, Zhulu Song, Zhongyuan Guan, et al.

    The in situ growth of ternary‐cation perovskite single crystal thin films (TC‐PeSCTFs) on charge‐transport layers is a promising route to high‐performance optoelectronics. However, such growth is plagued by intrinsic instability during crystallization; namely, the oxidation of iodide (I − to I 2 /I 3 − ) and deprotonation of organic cations (FA + and MA + ), which lead to phase separation and a high trap density that degrades device performance. Here, we introduce citric acid (CA) as a multi‐functional additive to suppress these deleterious reactions. We demonstrate that CA acts as a reducing agent, scavenging I 2 /I 3 − and regenerating I − , and as a proton source, mitigating cation deprotonation. Concurrently, CA passivates Pb‐related dangling bonds, further reducing defect density. This approach effectively stabilizes the precursor solution and suppresses phase separation during crystallization. Consequently, we fabricate perovskite solar cells that achieve a power conversion efficiency of 23.39% and a high open‐circuit voltage ( V OC ) of 1.14 V for FA‐based PeSCTFs. This work provides a molecular‐level strategy for regulating the growth of mixed‐cation perovskite single crystals, critical for their application in advanced optoelectronic devices.

  • Open Access

    Biodegradable magnesium alloys and magnesium metal matrix composites (Mg/MMCs) in biomedical applications: a comprehensive state-of-the-art review based on materials, processing techniques, design, and application perspective

    by Temesgen Atnafu Yemata, Hongyi Lu, Yun Zheng, Aung Ko Ko Kyaw, Qiang Zhu, Jianwei Xu, Wee Shong Chin, Yasuhiko Hayashi, Messele Kassaw Tadsual


  • Top Cited Papers

    Thermodynamic inhibition of bromine-rich phase nucleation in wide-bandgap perovskites for operationally stable tandem solar cells

    by Xueying Yang, Zhongliang Yan, Shibo Wang, Pengfei Fu, Chunyan Deng, Guang Yang, Yu Lou, Zhaojin Wang, Miao Zeng, You Chen, et al.

    We report a preemptive stabilization strategy for wide-bandgap perovskites, where K + suppresses Br-rich nucleation thermodynamically and synergizes with SCN − to form a 2D phase at grain boundaries, enabling efficient and stable tandem solar cells.