TUTatiana Sergeevna Ulanova

Tatiana Sergeevna Ulanova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tatiana Sergeevna Ulanova has a total of 77 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    ASSESSMENT OF INTERNATIONAL PRACTICE OF TOXIC ELEMENTS DETERMINATION IN RICE BY THE METHOD OF MASS SPECTROMETRY WITH INDUCTIVELY COUPLED PLASMA

    by Nina Vladimirovna Zaitseva, Tatiana Sergeevna Ulanova, Galina Akhmetovna Veikhman, Ksenia Olegovna Gileva, Elena Vyacheslavovna Stenno, Anna Vladimirovna Nedoshitova

    Химия растительного сырья Научные журналы Алтайского государственного университета Научные журналы АлтГУ

  • Open Access

    Quantitative determination of phenol and pyrocatechol in the whole blood by high performance liquid chromatography

    by Tatiana S. Ulanova, Tatiana D. Karnazhitskaya, Maria O. Starchikova, Татьяна Дмитриевна Карнажицкая

    Introduction. Phenol and its derivatives are widely distributed in the environment. To assess the risk of the negative impact of phenols on human health, data on their content in biological media are needed. Purpose of research. Development of a sensitive and selective method for the determination of phenol and catechol in the whole blood by HPLC. Materials and methods. The studies were carried out on a Shimadzu liquid chromatograph with an RF-20A fluorimetric detector. The efficiency of extraction of analytes from the matrix was checked by methods of liquid and solid phase extraction, QuEChERS. The metrological parameters of the measurement technique were experimentally established. Approbation of the method was carried out during the analysis of whole blood in children living in territories with various technogenic impacts. Results. The developed method makes it possible to determine phenol and catechol in whole blood at the level of 0.005–0.5 mg/dm3 with an error of ≤33%. The degree of extraction of phenol from whole blood by the QuEChERS method is 100%, pyrocatechol – 75%. A significantly higher (p ≤ 0.05) average group content of phenol and pyrocatechol was established in the whole blood of children living in an ecologically loaded area compared to a conditionally clean area by 2.1 times. Limitations. The study of the content of phenol and pyrocatechol in the whole blood in the child population is limited by the number of territories and examined children. To establish the background content of phenol and catechol in the whole blood of the child population at the population level under conditions of environmental stress and outside the zone of anthropogenic influence, it is necessary to conduct more extensive studies in various territories covering a larger number of examined children. Conclusion. The developed method can be used in hygienic research to assess the risk of phenols exposure to the health of the child population living in areas with various anthropogenic pressure.

  • Determination of toxic element concentrations in flour and cereal products by mass spectrometry with inductively coupled plasma

    by N.V. Zaitseva, T.S. Ulanova, K.S. Gileva, G.A. Veikhman, E.V. Stenno, A.V. Nedoshitova, M.V. Volkova

    Определение содержания токсичных элементов в мукомольно-крупяных изделиях методом масс-спектрометрии с индуктивно-связанной плазмой


  • Open Access

    Environmental Noise Measurement Technique and Evaluation of Contribution of a Large Industrial Enterprise to Noise Pollution in the Neighboring Residential Area

    by Aleksey L. Ponomarev, Tatyana S. Ulanova, Olga A. Molok, Andrey A. Odegov

    Introduction: Strong influence of noise on the urban population is one of the problems of a large city. The main sources of noise include road transport, industrial enterprises, and construction sites. A combined exposure to various sources of noise impedes assessment of their effects on the population. Distinguishing one noise source from another is a difficult measurement task. Objective: To measure noise levels close to a large industrial enterprise given busy traffic nearby, and determine contributions of the industry and road transport to the noise situation in the neighboring residential area. Materials and methods: In summer 2022, noise levels were measured in the vicinity of a large industrial enterprise located in the city of Perm in the daytime and at night at seven and eight sites, respectively, using a sound and vibration meter of the “Assistant” series with an additional “Monitoring” mode. The subsequent processing of chronograms in the “Monitoring” software enabled us to distinguish the noise generated by the industry from that of road traffic using the “Cut” function that removes interferences. Processing of the results using the “energy subtraction” technique allowed quantification of contributions of various sources to the local noise pollution. Results: In this study, noise was measured in a residential area adjacent to an industrial enterprise and the obtained results are provided. Noise levels from the enterprise were determined using a specialized software. The calculated contributions to the noise environment in the residential area vary between 0.035 and 0.603. The conclusion is made about a possible effect produced by noise from the analyzed industrial enterprise on people living on this territory. Conclusion: The effect of industrial noise on people living close to industrial premises is significant only at nighttime.


  • Open Access

    Methodical approaches to the detection polycyclic aromatic hydrocarbons in ambient air (analytical review)

    by Tatyana S. Ulanova, Tatyana D. Karnazhitskaya, Anastasiya S. Zorina, Mariya O. Starchikova, Татьяна Дмитриевна Карнажицкая

    Among the persistent organic pollutants of atmospheric air, a special place is occupied by a group of polycyclic aromatic hydrocarbons (PAHs) or polyarenes due to their high carcinogenic hazard. In view of the ubiquitous presence of these substances in the atmospheric air, low values of hygienic standards and values of reference concentrations (RfC) for chronic inhalation exposure, the qualitative and quantitative identification of PAHs is the critical task. Purpose is to analyze modern methodological approaches used in laboratory practice to determine polyarenes in atmospheric air on the base of Russian and foreign sources. The paper considers modern methods for the analytical control of PAHs in atmospheric air, officially approved in the Russian Federation and presented in the world literature. The search for literary sources was carried out using the PubMed, RSC Publishing, Springer Nature, SCOPUS, eLIBRARY.RU databases. An analysis of the methodological and scientific and technical literature on methods for the determination of PAHs in atmospheric air made it possible to identify the main directions of methodological developments used in modern laboratory practice for the analytical control of polyarenes in air. The advantages and disadvantages of specific methods, individual stages of analysis, conditions for sampling, storage and transportation of samples, which together can lead to false positive or false negative results, are presented. Conclusion. Modern methods for the analysis of polyarenes in atmospheric air are the result of continuous improvement in the technique of performing individual analytical procedures, the development of new methodological approaches to solving analytical problems, the emergence of new, more advanced measuring and auxiliary equipment, which makes it possible to develop highly sensitive and highly selective methods for measuring toxicants in the human environment at the level of MPCdaily average, MPCone-time and RfC for chronic inhalation exposure.

  • Open Access

    Application inductively coupled plasma mass spectrometry for assessing the content of essential and toxic elements in whole blood of unexposed adults in the Russian Federation

    by Nina V. Zaitseva, Tatyana S. Ulanova, Anna V. Nedoshitova, Galina A. Veikhman, Marina V. Volkova, Elena V. Stenno

    BACKGROUND: Determination of the essential and toxic elements in human blood is an important and urgent task in monitoring, environmental, and hygienic studies accomplished in evidence-based medicine when the population health risks are assessed. AIM: Biomonitoring of unexposed adult population in the Russian Federation, interpretation of the obtained data taking into account international requirements. MATERIAL AND METHODS: The contents of V, Cr, Mn, Ni, Cu, Zn, As, Se, Sr, Cd, Tl and Pb were determined in the blood of adults (n=80, aged 45.83.7 years) living in rural areas in the Western Urals region of the Russian Federation and in the territory of the North of Eastern Siberia (n=90, age 38.27.6 years). The measurements were carried out using Agilent 7500cx quadrupole inductively coupled plasma mass spectrometer (Agilent Technologies, USA) with an octopole reaction-collision cell (ORS) in conformity with the Methodical guidelines 4.1.3230-14 and 4.1.3161-14 (FR.1.31.2014.17064) developed by the authors. We compared the range of P5P95 values for unexposed groups of the adult population of the Western Urals and the North of Eastern Siberia with data from hygiene studies in Germany, Italy, France, and Canada. RESULTS: The arithmetic mean content of elements in blood of adults Western Urals region amounted to 0.13 g/l (V); 4.75 g/l (Cr); 13.41 g/l (Mn); 4.06 g/l (Ni); 827 g/l (Cu); 5369 g/l (Zn); 0.42 g/l (As); 123 g/l (Se); 22.75 g/l (Sr); 0.45 g/l (Cd); 0.04 g/l (Tl); 14.37 g/l (Pb). The validity of the results was confirmed by analyzing standard samples of SERONORMTM Whole Blood L1 and SERONORMTM Whole Blood L2 (Norway). The results are presented as basic statistical indicators: minimum and maximum values, arithmetic mean, 5th, 50th, 95th percentiles and are interpreted in accordance with up-to-date international requirements. CONCLUSION: We compared the range of P5P95 values for unexposed groups of adults in the Western Urals and the North of Eastern Siberia region with the results produced by several hygienic studies conducted in Germany, Italy, France and Canada. As a result, we established elevated concentrations of chromium, manganese, and nickel in the blood of adults from Russia. The contents of copper, zinc, selenium, and arsenic in the blood of adults living in the Russian Federation were different from the reference values used in such diagnostic laboratories as ALS Scandinavia, SIVR List Italy and in the monograph by Norbert Titz (USA).

  • Features of the use of food simulators used when testing packaging for the study of food aluminum foil

    by Pavel Z. Shur, Светлана Валентиновна Редько, Tatyana S. Ulanova, Elena V. Stenno, Galina A. Vejhman

    Introduction. Aluminum foil is one of the most widely used food packaging, since it has a set of high consumer characteristics. At the same time, the food foil can serve as a source of aluminum entering the human body, but there is no specific method of testing foil. In this regard, the study of the spectrum and features of the application of food simulators is relevant to improve various stages of food aluminum foil testing. The purpose of the study is to investigate the features of the use of food simulators and testing stages used as a whole for any food packaging in the study of aluminum foil. Materials and methods. With the application of the elements of the PRISMA systematic reporting reports on systematic reviews, the analysis of scientific and technical literature on the features of the use of food simulators when testing the food aluminum foil were performed. Measurement of aluminum content in food simulators after contact with aluminum foil was carried out by spectrometry methods. Results. When testing the food aluminum foil, it is impractical to the use of the entire list of food simulators recommended by TR TS 005/2011. It was established to be advisable to improve the current instructive methodological base, in particular the pre-analytic stage of sample preparation. A method of sample preparation and spectral measurement methods was carried out by a comparative experimental measurement of real samples of food simulators after contact with the foil. Limitations. The limitation of the study was the use in the experiment exclusively of samples of aluminum foil with a thickness of 0.009 mm from aluminum alloy 8011 and aluminum foil with a thickness of 0.02 mm from aluminum alloy 1200. account the features of the use of aluminum foil into everyday life, therefore, the methodological approaches to the stages of its testing need to be improved. The developed method of sample preparation allows applying unified requirements in the process of testing food aluminum foil to safely use it in everyday life. Conclusion. The list of model environments for the study of any food packaging does not take into account the specifics of the use of aluminum foil in everyday life, therefore, methodological approaches to the stages of its testing need to be improved. The developed method for sample preparation allows applying unified requirements in the process of testing food-grade aluminum foil for the purpose of its safe use in everyday life.


  • Methodical peculiarities of air sampling for detecting contents of low molecular weight organic compounds on the example of furan and methylfuran

    by Tatyana S. Ulanova, Татьяна Валентиновна Нурисламова, Olga A. Maltseva, Nina A. Popova

    Introduction. Variable analytical control methodologies are applied in monitoring over contents of low molecular weight organic compounds in ambient air. Their unification is a vital and serious challenge requiring valid substantiation and selection of optimal air sampling techniques. Our research goal was to substantiate and select an air sampling technique for chemical analysis of furan and methylfuran. Materials and methods. Our research concentrated on developing and optimizing the process of air samples preparation for chemical analysis of furan and methylfuran; examining effectiveness of furan and methylfuran sorption-desorption using various sorbents. Standard furan and methylfuran samples (≥99.0% Sigma-Aldrich), heptane solvents, sorbent tubes with Tenax, Sylochrom C-120, and coal as sorbents were used in the research. All experimental studies were aimed at testing effective procedures for taking and preparing air samples for further furan and methylfuran analysis in them. They were performed on “Kristall-5000” gas chromatographer with mass-selective detection (MSD) and 25-meter long PoraPlotQ-capillary column. Results. We comparatively analyzed the results produced by taking air samples for further detection of furan and methylfuran in them using different techniques. They included low temperature concentration; sorption on filters made of quartz microfiber and a sorbent tube with Nenax TA; sorption on a tube with Tenax TA at t=20-25 °C. The analysis enabled us to reveal an effective procedure for taking ambient air samples for further detection of furan and methylfuran in them. This procedure was low temperature concentration of low molecular weight organic compounds on a sorbent tube with Tenax TA. Limitations. The accomplished study had no limitations. Conclusion. The accomplished study allows us to recommend taking air samples during 10 minutes with consumption being 0.1 l/min for further detection of furan and methylfuran in them using low temperature concentration on a sorbent tube with Tenax TA. The achieved effectiveness is 99.2% for furan and 100% for methylfuran.

  • Study of the aerogenic impact of formaldehyde on the health of child population

    by Tatyana S. Ulanova, Konstantin P. Luzhetskiy, Tatyana D. Karnazhitskaya, Mariya O. Starchikova, Marina S. Pustobayeva, Татьяна Дмитриевна Карнажицкая

    Introduction. Formaldehyde is a widespread environmental contaminant hazardous for human health; it belongs to the second hazard category for its inhalation exposure. Aerogenic inhalation exposure results in elevated risks of adverse effects on human health. Children are susceptible to such adverse effects produced by formaldehyde. Materials and methods. We performed chemical-analytical studies on formaldehyde contents in ambient air, inside pre-school children facilities and schools, and biological media of children living in a large industrial city (the test group) and a rural area (the reference group) in the Western Urals. Results. In the city, formaldehyde contents were 1.5 times higher in ambient air and 2.9 times higher inside pre-school children facilities and schools than in rural areas. Indoor air creates a more significant burden as per formaldehyde against ambient air, and its share is equal to 93% in the city and 87% in the rural area. The average group concentration of formaldehyde in blood was four times higher in the test group than the same parameter in the reference one. We also detected that formaldehyde contents were 7.6 times higher than the regional background level in the blood of children from the test group and 1.8 times higher in children from the reference group. We analyzed somatic morbidity as per nosologic categories and revealed that priority pathologies caused by exposure to formaldehyde were diagnosed 1.1-1.9 times more frequently in the test group than in the reference one (р<0.05). Regarding specific nosologies, priority nosologies were 1.8-9.7 times more frequent in the test group than in the reference group (р<0.05). We created statistically significant models showing dependence between a potential growth in morbidity with respiratory diseases, immune and nervous system diseases among children with elevated concentrations of free formaldehyde in the blood (R2=0.13-0.97; F=45.4-4,074; р≤0.001). Limitations. In the study, the possibility of an increase in the incidence of the child population, associated with the possible influence of factors not studied in this work, cannot be ruled out. However, the revealed relationships between the content of formaldehyde in the blood and the somatic status of children according to the criterion of the probability of an increase in the number of diseases from an increased content of formaldehyde in the blood may suggest one of the reasons for the increase in the frequency of respiratory diseases, disorders of the immune system, diseases of the blood and blood-forming organs in children under aerogenic exposure to formaldehyde. Conclusion. Having examined formaldehyde contents in air in the city and rural area, we established that toxicant concentrations were higher inside pre-school children facilities and schools in the city than in the rural area. High formaldehyde contents in the blood of children living in sizeable industrial cities occur predominantly due to aerogenic exposure to formaldehyde in indoor air and lead to more probable associated diseases of the respiratory, immune, and nervous systems.


  • Identification and chromate-mass-spectrometry quantification of toxic chemicals (N-nitrosamines, phthalates) in baby foods

    by N.V. Zaitseva, T.S. Ulanova, T.V. Nurislamova, N.A. Popova, O.A. Maltseva, Perm National Polytechnic Research University

    Currently, assessing exposure to toxic chemicals detected in foodstuffs is a vital issue, especially regarding foods for babies and toddlers. The research goal was to identify and quantify toxic chemicals (N-nitrosamines, phthalates) in baby foods. Material and methods. Our research objects were 21 samples of canned meat and vegetable purees; 30 samples of juices. All samples were bought in retail outlets. We applied solid phase extraction to prepare the samples for the chromatographic analysis. Chemicals were identified in samples by a hybrid technique, gas chromatography and quadrupole mass spectrometry (GC-MS). The components were classified by comparing the mass spectra we obtained with spectra of specific chemicals and data from the following libraries: NIST 08.L, WILEY275.L and PMW_TOX2.L, AMDIS, USEPA (US Environmental Protection Agency) database with identification numbers of environmental pollutants; libraries containing mass spectra of narcotics, drugs, toxic pollutants and pesticides. Quantitative determination of phthalates in juice products by HPLC/MS was performed. Results. We identified three toxic chemicals in the analyzed canned meat and vegetable purees for babies. They belonged to the 1-3 hazard category and to different classes of organic compounds. Specifically, we identified nitrogen-containing chemicals (N-nitrosamines within a range of concentrations being 0.00077-0.0015 mg/kg with a 73% probability that a mass spectrum would match one taken from a library) in 52.9% of samples. These chemicals are not allowed in canned meat purees for babies by the Technical Regulations TR CU 021/2011 (<0.001 mg/kg). Next, we identified dibutyl phthalate and diethyl phthalate in 30.0% of samples; contents of these organic compounds in canned meat purees for babies are not stipulated by the TR CU 021/2011. We also identified an aromatic compound, namely furfural in 21.7% of samples, and a food additive, 2-butenoic acid (E570) in 5.3% of samples; their contents are regulated by the Technical Regulations TR CU 029/2012. Three toxic chemicals were identified in the analyzed juice samples. First, N-nitrosodiethylamine and N-nitrosodimethylamine were identified in 56.7% of samples (with a 73% probability that a mass spectrum would match one taken from a library, over a concentration range of 0.00045- 0.00077 mg/kg). Second, we identified phthalates (dibutyl phthalate, diethyl phthalate, and diisobutyl phthalate) in 30% of samples (in the concentration range from 0.4 to 59.26 mg/l). The contents of these compounds in juices for babies are not regulated by the TR CU 021/2011. We also detected furfural in 56.7% of samples (with a value of the coefficient of coincidence with library data of 90%), the use of which is regulated in TR CU 029/2012. Conclusion. We have developed and experimentally substantiated an algorithm of an analytical study with its focus on preparing food samples for further identification of chemicals in them. The algorithm involves using a complex technique that combines distillation, solid phase extraction, gas chromatography and mass spectrometry. This technique provides an opportunity to identify a component structure of complex chemical mixtures in food samples with high probability and reliability. It also provides solid evidence that organic compounds occur in food samples based on comparing analytical mass spectra with those taken from mass spectral libraries.