ABAmir Masoud Bozorgi

Amir Masoud Bozorgi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Amir Masoud Bozorgi has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Unified Coil and Compensation Network Design for Improving Wireless Power Transfer Efficiency Over Wide Output Load Variation Ranges

    by Amir Masoud Bozorgi, Reza Tavakoli, Mehdi Farasat

    It is shown that compensation network and coil design collectively affect wireless power transfer efficiency. Based on this fact, a novel design approach of wireless power transfer (WPT) systems is proposed. Unlike majority of existing designs which aim at enhancing power transfer efficiency (PTE) at one rated operating point, the proposed design enhances the overall system PTE. This feature is essential for variable output loads such as batteries, where their internal impedance varies during charging period. To achieve this goal, improving time-weighted average efficiency of WPT system is set as the design criterion. Experimental studies of a 1.2 kW WPT system supplying constant resistive loads and battery loads verify that the proposed design enhances PTE both at rated output load and under wide output load variations.


  • Low Complexity Dual-Vector Model Predictive Current Control for Surface-Mounted Permanent Magnet Synchronous Motor Drives

    by Junshuo Chen, Yi Qin, Amir Masoud Bozorgi, Mehdi Farasat

    In dual-vector model predictive current control (MPCC), an active voltage vector followed by either a zero or an active voltage vector are applied in one control period. Due to high number of possible combinations of voltage vector pairs, determining the optimal pair becomes computationally expensive. A novel approach is proposed for reducing the number of candidate active voltage vectors. The concept is to use the projection of current error vector onto the active voltage vector which minimizes the cost function. The proposed dual-vector MPCC is implemented in rotor reference frame and does not need additional coordinate transformations and associated trigonometric calculations. Thus, it is simple to be digitally implemented. Furthermore, a novel method, which relies less on system model, is proposed for determining duty cycle of the active voltage vectors. Therefore, sensitivity to erroneous assumption of motor parameters, particularly at low speeds, is alleviated. Performance of a permanent magnet synchronous motor drive under the proposed MPCC is compared with a most recently introduced dual-vector MPCC based on deadbeat control. Experimental results with accurate and erroneous assumption of motor parameters verify the superiority of the proposed method in terms of computation simplicity, stator current and torque quality and dynamic response.


  • Model Predictive Direct Power Control of Three-Phase Grid-Connected Converters With Fuzzy-Based Duty Cycle Modulation

    by Amir Masoud Bozorgi, Hosein Gholami-Khesht, Mehdi Farasat, Shahab Mehraeen, Mohammad Monfared

    An improved model predictive direct power control (MPDPC) for three-phase grid-connected converters is proposed. In the proposed method, two voltage vectors are applied during a control period and their duty cycles are determined by a fuzzy logic-based modulator. The inputs to the modulator are the active and reactive power errors and the output is the duty cycle of the first (main) voltage vector. The fuzzy rules are developed based on expert knowledge and the fact that small/large power errors can be compensated by applying the main voltage vector for a small/large portion of the switching period. The candidate voltage vector pairs are examined on a control Lyapunov function and the pair that satisfy the closed-loop stability criteria are selected. The voltage vector pairs are then applied following a proposed switching pattern through which reduced average switching frequency is achieved. Comparative simulation and hardware-in-the-loop studies between the proposed method and a most-recently introduced duty cycle based MPDPC confirm that in addition to lower average switching frequency, better quality currents and active and reactive powers can be achieved under the proposed MPDPC.


  • Modulation Techniques for Common-Mode Voltage Reduction in the Z-Source Ultra Sparse Matrix Converters

    by Amir Masoud Bozorgi, Amir Hakemi, Mehdi Farasat, Mohammad Monfared

    Common-mode voltage (CMV) is known as a major cause of premature motor failures. The form and amplitude of the CMV generated by any converter depends on both the circuit topology and modulation technique. Among single stage AC/AC converters employed in drive applications, the Z-source ultra-sparse matrix converter (ZSUSMC) is a desirable choice due to reduced number of switches in its structure and voltage boosting capability. Based on these considerations, this paper aims to: 1) theoretically determine and compare the CMV of the ZSUSMC with four well-known impedance networks, namely cascaded, switched-inductor, quasi and series, in its structure, and 2) propose modulation techniques for CMV reduction in the ZSUSMCs. To this end, first, it is shown that the ZSUSMC, depending on the impedance network used in its structure, provides more freedom to choose from redundant switching states compared to the ultra-sparse matrix converter. Then, by taking advantage of this feature, novel modulation strategies that attenuate the CMV without affecting the boosting capability are developed. The proposed modulation schemes are based on avoiding the switching states most contributing to the CMV during a switching period. Through hardware-in-the-loop studies, the effectiveness of the proposed modulation strategies in reducing the CMV of the ZSUSMCs is verified.


  • Implementing modulation schemes with three switching transients in a switching period on single DSP: Application to Z-source ultra-sparse matrix converter

    by Amir Masoud Bozorgi, Mehdi Farasat

    Z-source networks have recently been employed with matrix converters (MCs) in order to address their limited voltage transfer ratio (VTR). In this paper, the space vector modulation of cascaded Z-source ultra-sparse matrix converter (ZSUSMC), where the Z-source network is inserted between the rectifier and inverter stages of an ultra-sparse matrix converter (USMC), is investigated. Digital implementation of the already existing space vector modulation (SVM) techniques for Z-source MCs is possible with a field programmable gate array (FPGA) employed along with a digital signal processor (DSP) due to occurrence of three switching transients in one control period. In this paper, an SVM scheme with an optimal switching pattern resulting in minimum number of changes in the switches states is developed. Furthermore, a novel approach for implementation of the developed modulation scheme on a single conventional DSP is proposed. Hardware-in-the-loop studies of the ZSUMC under the developed modulation scheme are carried out to verify the feasibility of the proposed implementation approach on a conventional DSP.


  • Novel modulation schemes and switching pattern for Z-Source ultra-sparse matrix converter

    by Amir Masoud Bozorgi, Mehdi Farasat, Ekrem Karaman

    The Z-Source networks are recently being employed in the matrix converters (MCs) to overcome their main drawback, which is the low voltage transfer ratio (VTR). In spite of several Z-Source topologies introduced for the direct and indirect matrix converters, some important issues such as their modulation, operational modes, existing challenges in practical implementation, the design of an optimal switching pattern, and so on, have not been fully addressed in the literature. This paper focuses on cascaded Z-Source ultra-sparse matrix converter (ZSUSMC), where the Z-Source network is inserted between the rectifier stage and inverter stage of an ultra-sparse matrix converter. Provided discussions can be extended to other indirect MC topologies, such as sparse and very-sparse MCs, though. Two space vector modulation (SVM) schemes, with and without considering the zero state in the space vector rectification, are proposed, and then, their advantages and disadvantages are discussed. In addition, an optimal switching pattern, which ensures minimum number of changes in the switches states over the entire switching period, is proposed. Hardware-in-the-loop studies are carried out and performance of the converter under the proposed modulation techniques is evaluated. The proposed modulations are compared with a recent study and its superior performance in terms of input and output currents quality is confirmed.


  • An In-Depth Investigation of a Z-Source Ultrasparse Matrix Converter in Buck and Boost Modes of Operation

    by Amir Masoud Bozorgi, Mehdi Farasat

    Z-source networks are recently being employed to enhance the boosting capability of matrix converters. This paper concentrates on cascaded Z-source ultrasparse matrix converter (ZSUSMC), where the Z-source network is placed between the three-switch input rectifier stage and the six-switch output inverter stage. Two space vector modulation schemes, with and without a zero state in the rectifier stage modulation, are presented and their advantages and disadvantages are discussed. In addition, restrictions imposed on the converter operation in buck mode, which arise from unidirectional nature of the ultrasparse matrix converter, are discussed and a solution is proposed for offsetting those limitations. Furthermore, an optimal switching pattern, which results in minimum possible number of changes in the switching states as well as even distribution of the shoot-through state over the entire control period, is proposed. Also, common-mode voltages of the converter in all possible switching configurations are calculated. Hardware-in-the-loop studies of a ZSUSMC-based permanent magnet synchronous motor drive are carried out to evaluate the performance of the drive under the proposed modulation techniques. The obtained results are compared with a recent study and the superiority of the proposed method in terms of converter input/output current quality is demonstrated.


  • Open Access

    Improved grid voltage sensorless control strategy for railway power conditioners

    by Amir Masoud Bozorgi, Majid Sanatkar Chayjani, Reza Mohammad Nejad, Mohammad Monfared

    Rapid development of high‐speed trains confronts the power grid with serious power quality problems. In this study, to compensate power quality, an improved grid voltage sensorless control method for the railway power conditioner (RPC) is proposed. The proposed control strategy utilises a moving average filter to better detect the compensating currents and a proportional‐resonant controller to control the compensating currents. Moreover, a sensorless virtual flux method based on second order low‐pass filters is presented to replace the AC voltage sensors. Using the proposed strategy, the dynamic and steady‐state characteristic of the RPC is significantly enhanced. Through simulation tests, the effectiveness of the proposed methods is confirmed.