MKMarcelo A. Kuroda

Marcelo A. Kuroda

*This is an algorithmically generated author record based on publicly available information.

Marcelo A. Kuroda has a total of 158 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Electrides with Tunable Electron Delocalization for Applications in Quantum Computing and Catalysis

    by Andrei Evdokimov, Valentina Nesterova, Marcelo A. Kuroda, Konstantin Klyukin, Evangelos Miliordos


  • Electrode-Assisted Switching in Memristors Based on Single-Crystal Transition Metal Dichalcogenides

    by Dakotah M. Kirk, Lu Wang, Marcelo A. Kuroda

    The recently demonstrated nonvolatile resistive switching in transition metal dichalcogenides (TMDs) exhibits very different responses depending on the crystal quality, and the underlying mechanisms are yet to be elucidated. In this study, we utilize first-principles approaches to link the resistance-switching behavior in monolayer single-crystal TMDs to a semiconductor-to-metal transition. We analyze the electronic structure and charge transport properties in these systems by utilizing density functional theory and quantum transport calculations to compare the impact of different electrodes on the modulation of the junction resistivity. We specifically show that metal electrodes play a prominent role in assisting the transition between the semiconducting 1H and metallic 1T' phases in the TMD layer. Our results yield variations in conductivity in agreement with those found in experimental work. Analysis of defective layers indicates that the primary role of vacancies and substitutions is to lower the energy difference between the 1H and the 1T' phases rather than varying the conductance in these systems through defect levels. Overall, these results provide an explanation of the memristive behavior in single-crystal TMDs, proving helpful toward the development of flexible electronics and neuromorphic computing applications.


  • Open Access

    Band-engineered LaFeO3–LaNiO3 thin film interfaces for electrocatalysis of water

    by Rajendra Paudel, Andricus R. Burton, Marcelo A. Kuroda, Byron H. Farnum, Ryan B. Comes

    Iron and nickel-based perovskite oxides have proven promising for the oxygen evolution reaction (OER) in alkaline environments, as their catalytic overpotentials rival precious metal catalysts when the band alignment is tuned through substitutional doping or alloying. Here, we report the engineering of band alignment in LaFeO3/LaNiO3 (LFO/LNO) heterostructures via interfacial doping that yields greatly enhanced catalytic performance. The 0.2 eV offset (VBO) between the Fermi level in metallic LNO and the valence band in semiconducting LFO that we predict using density functional theory makes LFO a p-type semiconductor, resulting in significantly lower barriers for hole transport through LFO compared to the intrinsic material. Experimental band alignment measured with in situ x-ray photoelectron spectroscopy of epitaxial LFO/LNO heterostructures confirms these predictions, producing a measured VBO of 0.3(1) eV. Furthermore, OER catalytic measurements on these samples in the alkaline solution show an increase in catalytic current density by a factor of ∼275 compared to LFO grown on n-type Nb-doped SrTiO3. These results demonstrate the power of tuning band alignments through interfacial band engineering for improved catalytic performance of oxides.


  • Open Access

    Trap passivation of 4H-SiC/SiO2 interfaces by nitrogen annealing

    by Suman Das, Hengfei Gu, Lu Wang, Ayayi Ahyi, Leonard C. Feldman, Eric Garfunkel, Marcelo A. Kuroda, Sarit Dhar

    We report an N2 based annealing treatment to passivate interface traps (Dit) in n- and p-type 4H-SiC. The process has the potential to replace the commonly used hazardous and expensive gas nitric oxide (NO). N2 postoxidation annealing reduces Dit in both the upper and lower halves of the 4H-SiC bandgap, with a greater impact at the valence band edge. N2 annealing at 1500 °C is observed to be more effective in passivating traps and positive fixed charges than NO annealing for p-type devices, whereas for n-type devices, the opposite is true. The breakdown voltages for these devices are found to be lower than that of NO annealed devices. X-ray photoelectron spectroscopy has been performed to estimate the nitrogen areal density at the interface. Dit is measured as a function of nitrogen areal densities in the near interfacial regions for the different processes. Theoretical analysis through density functional theory is consistent with the measured Dit profiles by showing the generation of additional states near the valence band edge due to increased nitrogen concentration. In addition to reporting the effect of N2 annealing on both n- and p-type 4H-SiC, this work correlates the nitrogen areal densities at the interface to the Dit and explains the difference in Dit characteristics with nitrogen areal density between n- and p-type interfaces.


  • Open Access

    Study of Carrier Mobilities in 4H-SiC MOSFETS Using Hall Analysis

    by Suman Das, Yongju Zheng, Ayayi Ahyi, Marcelo A. Kuroda, Sarit Dhar

    The channel conduction in 4H-SiC metal–oxide–semiconductor field effect transistors (MOSFETs) are highly impacted by charge trapping and scattering at the interface. Even though nitridation reduces the interface trap density, scattering still plays a crucial role in increasing the channel resistance in these transistors. In this work, the dominant scattering mechanisms are distinguished for inversion layer electrons and holes using temperature and body-bias-dependent Hall measurements on nitrided lateral 4H-SiC MOSFETs. The effect of the transverse electric field (Eeff) on carrier mobility is analyzed under strong inversion condition where surface roughness scattering becomes prevalent. Power law dependencies of the electron and hole Hall mobility for surface roughness scattering are determined to be Eeff−1.8 and Eeff−2.4, respectively, analogous to those of silicon MOSFETs. Moreover, for n-channel MOSFETs, the effect of phonon scattering is observed at zero body bias, whereas in p-channel MOSFETs, it is observed only under negative body biases. Along with the identification of regimes governed by different scattering mechanisms, these results highlight the importance of the selection of substrate doping and of Eeff in controlling the value of channel mobility in 4H-SiC MOSFETs.


  • Open Access

    Surface stability of SrNbO3+δ grown by hybrid molecular beam epitaxy

    by Suresh Thapa, Sydney R. Provence, Patrick T. Gemperline, Bethany E. Matthews, Steven R. Spurgeon, Sydney L. Battles, Steve M. Heald, Marcelo A. Kuroda, Ryan B. Comes

    4d transition metal oxides have emerged as promising materials for numerous applications including high mobility electronics. SrNbO3 is one such candidate material, serving as a good donor material in interfacial oxide systems and exhibiting high electron mobility in ultrathin films. However, its synthesis is challenging due to the metastable nature of the d1 Nb4+ cation and the limitations in the delivery of refractory Nb. To date, films have been grown primarily by pulsed laser deposition (PLD), but development of a means to grow and stabilize the material via molecular beam epitaxy (MBE) would enable studies of interfacial phenomena and multilayer structures that may be challenging by PLD. To that end, SrNbO3 thin films were grown using hybrid MBE for the first time using a tris(diethylamido)(tert-butylimido) niobium precursor for Nb and an elemental Sr source on GdScO3 substrates. Varying thicknesses of insulating SrHfO3 capping layers were deposited using a hafnium tert-butoxide precursor for Hf on top of SrNbO3 films to preserve the metastable surface. Grown films were transferred in vacuo for x-ray photoelectron spectroscopy to quantify elemental composition, density of states at the Fermi energy, and Nb oxidation state. Ex situ studies by x-ray absorption near edge spectroscopy and scanning transmission electron microscopy illustrate that the SrHfO3 capping plays an important role in preserving the crystalline quality of the material and the Nb 4d1 metastable charge state under atmospheric conditions.


  • Crown Nanopores in Graphene for CO2 Capture and Filtration

    by Binquan Luan, Bruce Elmegreen, Marcelo A. Kuroda, Zonglin Gu, Guojun Lin, Shuming Zeng

    With growing concerns about global warming, it has become urgent and critical to capture carbon from various emission sources (such as power plants) and even directly from air. Recent advances in materials research permit the design of various efficient approaches for capturing CO2 with high selectivity over other gases. Here, we show that crown nanopores (resembling crown ethers) embedded in graphene can efficaciously allow CO2 to pass and block other flue gas components (such as N2 and O2). We carried out extensive density functional theory-based calculations as well as classical and ab initio molecular dynamics simulations to reveal the energetics and dynamics of gas transport through crown nanopores. Our results highlight that the designed crown nanopores in graphene possess not only an excellent selectivity for CO2 separation/capture but also fast transport (flow) rates, which are ideal for the treatment of flue gas in power plants.


  • High temperature characteristics of nitric oxide annealed p-channel 4H-SiC metal oxide semiconductor field effect transistors

    by Suman Das, Tamara Isaacs-Smith, Ayayi Ahyi, Marcelo A. Kuroda, Sarit Dhar

    In this work, p-channel 4H-SiC MOSFETs were fabricated and analyzed at high temperature. It is demonstrated that nitridation of the gate oxide enables enhancement mode operation in these devices. Nitrogen incorporation at the 4H-SiC/SiO2 interface by nitric oxide annealing reduces the interface trap density energetically located in the lower half of the 4H-SiC bandgap, resulting in viable high temperature p-channel devices. In the 27–300 °C temperature range, the threshold voltage decreases with increasing temperature, consistent with the reduction of occupied interface traps at higher temperatures. The hole channel mobility is weakly temperature dependent under strong inversion conditions. Hall measurements support that above the threshold voltage, the mobility is limited by surface roughness scattering. In weaker inversion, the channel conductivity is limited by interface hole trapping and Coulomb scattering. In addition, high temperature bias stress measurements confirm a temperature activated hole trapping under negative gate bias, which requires further investigations.


  • Spin-Injection Enhancements in van der Waals Magnetic Tunnel Junctions through Barrier Engineering

    by Jonathan J. Heath, Marcelo A. Kuroda

    The weak interlayer coupling in two-dimensional materials enables the formation of sharp crystalline magnetic tunnel junctions without the epitaxial constraints found in the bulk. Amid the large number of heterostructures that can be formed using these layered materials, a means to guide the experimental design of systems with enhanced responses is desired. Here, we attain meaningful improvements in spin injection by tailoring the tunneling barriers through the choice of the metal electrodes. Owing to the weak coupling, the barrier engineering can be rationalized from properties of bulk components from first-principles calculations, leading to superior spin injection and magnetoresistance. Analysis of CrI3 junctions formed with transition-metal dichalcogenide electrodes shows that junction conductivities increase by nearly 3 orders of magnitude with respect to those experimentally demonstrated with graphite leads. Moreover, we find that tunneling magnetoresistance significantly augments with low-work-function electrodes when carriers are injected near the CrI3 conduction-band edge. The predictive approach employed in this work shows good agreement with detailed quantum transport calculations and can potentially accelerate the design of tunnel junctions based on two-dimensional materials.