Ilhan Yavuz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ilhan Yavuz has a total of 500 co-authors. Here are the top co-authors by number of shared publications:
- Caner Deger
Department of Physics, Marmara University, Istanbul, Turkey
28 shared publications - Rui Wang
Department of Materials Science and Engineering School of Engineering Westlake University Hangzhou China
18 shared publications - Jingjing Xue
State Key Laboratory of Silicon and Advanced Semiconductor Materials and School of Materials Science and Engineering Zhejiang University Hangzhou China
15 shared publications - Yang Yang
Department of Materials Science and Engineering, University of California, Los Angeles, USA
13 shared publications Yuan Tian
Department of Materials Science and Engineering and Department of Electronic and Information Engineering, School of Engineering, Westlake University, Hangzhou 310024, China
11 shared publications- Stefaan De Wolf
King Abdullah University of Science and Technology (KAUST)
10 shared publications
Latest Publications
- 29 October 2026
- Published by Springer Nature in Nature Energy
- p. 1-12
Perovskite lattice compliance enables efficient and stable bifacial perovskite/silicon tandem photovoltaics
- 29 October 2026
- Published by Springer Nature in Nature Energy
- p. 1-12
Perovskite lattice compliance enables efficient and stable bifacial perovskite/silicon tandem photovoltaics
- Open Access
- 26 October 2026
- Published by Royal Society of Chemistry (RSC) in EES Solar
- Vol. 2 (5) , 1309-1319
Constructing an inert molecular contact using phenyl-connected pyrene for stable perovskite photovoltaics
We revealed substrate-induced degradation in inverted PSCs and developed inert FTO/PyPh bottom-contact architecture that enables efficient hole extraction and delivers 26.27% efficiency with >96% retention after 1380 h at 85 °C.
- 26 October 2026
- Published by Royal Society of Chemistry (RSC) in EES Solar
- Vol. 2 (5) , 1309-1319
Open AccessConstructing an inert molecular contact using phenyl-connected pyrene for stable perovskite photovoltaics
We revealed substrate-induced degradation in inverted PSCs and developed inert FTO/PyPh bottom-contact architecture that enables efficient hole extraction and delivers 26.27% efficiency with >96% retention after 1380 h at 85 °C.
- 6 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (41) , 44269-44279
Machine-Learning-Guided Design of Semirigid Hole-Selective Self-Assembled Monolayers for High-Efficiency and Stable Perovskite Solar Cells
Inverted perovskite solar cells (PSCs) require efficient, aggregation-resistant hole-transporting self-assembled monolayers (SAMs) at the buried interface. Conventional carbazole-based SAMs, such as 4PACz, suffer from excessive π–π stacking-driven aggregation, leading to inhomogeneous films, elevated trap-state densities, and accelerated device degradation. Here, we report a machine-learning (ML)-guided design strategy employing a pairwise-ranking Siamese directed message-passing neural network (D-MPNN) trained on a curated data set of published SAM control–target pairs. Statistical analysis of the data set reveals that the reduced tail-group planarity improves PCE relative to carbazole benchmarks. Guided by this insight, we designed two semirigid seven-membered-ring SAMs, 4-(5H-dibenzo[b,f]azepin-5-yl)butyl)phosphonic acid (4PABAP, ML score: +2.54) and 4-(10,11-dihydro-5H-dibenzo[b,f]azepin-5-yl)butyl)phosphonic acid (4PAHBAP, ML score: + 5.52) that the model ranked substantially above 4PACz (score: −0.32). Ab initio molecular dynamics (AIMD) simulations confirm that the nonplanar seven-membered rings suppress π–π stacking, enhance ITO-surface anchoring (interaction energies: 4PAHBAP −1.23 eV vs 4PACz −0.74 eV), and promote stronger charge transfer at the SAM/perovskite interface. Experimentally, 4PAHBAP-based inverted PSCs achieve a champion power conversion efficiency (PCE) of 26.36% with a fill factor (FF) of 84.35% significantly outperforming 4PACz-based controls (23.52%, FF 77.51%). Moreover, 4PAHBAP-based devices retain 92.5% of initial PCE after 1,200 h of continuous 1-sun maximum-power-point (MPP) operation under ISOS-L-3 standards, and 95.7% after 1,200 h thermal aging at 85 °C (ISOS-D-2). This work establishes a generalizable ML-first-then-validate paradigm for rational SAM design that simultaneously maximizes efficiency and long-term operational durability.
- 6 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (41) , 44269-44279
Machine-Learning-Guided Design of Semirigid Hole-Selective Self-Assembled Monolayers for High-Efficiency and Stable Perovskite Solar Cells
Inverted perovskite solar cells (PSCs) require efficient, aggregation-resistant hole-transporting self-assembled monolayers (SAMs) at the buried interface. Conventional carbazole-based SAMs, such as 4PACz, suffer from excessive π–π stacking-driven aggregation, leading to inhomogeneous films, elevated trap-state densities, and accelerated device degradation. Here, we report a machine-learning (ML)-guided design strategy employing a pairwise-ranking Siamese directed message-passing neural network (D-MPNN) trained on a curated data set of published SAM control–target pairs. Statistical analysis of the data set reveals that the reduced tail-group planarity improves PCE relative to carbazole benchmarks. Guided by this insight, we designed two semirigid seven-membered-ring SAMs, 4-(5H-dibenzo[b,f]azepin-5-yl)butyl)phosphonic acid (4PABAP, ML score: +2.54) and 4-(10,11-dihydro-5H-dibenzo[b,f]azepin-5-yl)butyl)phosphonic acid (4PAHBAP, ML score: + 5.52) that the model ranked substantially above 4PACz (score: −0.32). Ab initio molecular dynamics (AIMD) simulations confirm that the nonplanar seven-membered rings suppress π–π stacking, enhance ITO-surface anchoring (interaction energies: 4PAHBAP −1.23 eV vs 4PACz −0.74 eV), and promote stronger charge transfer at the SAM/perovskite interface. Experimentally, 4PAHBAP-based inverted PSCs achieve a champion power conversion efficiency (PCE) of 26.36% with a fill factor (FF) of 84.35% significantly outperforming 4PACz-based controls (23.52%, FF 77.51%). Moreover, 4PAHBAP-based devices retain 92.5% of initial PCE after 1,200 h of continuous 1-sun maximum-power-point (MPP) operation under ISOS-L-3 standards, and 95.7% after 1,200 h thermal aging at 85 °C (ISOS-D-2). This work establishes a generalizable ML-first-then-validate paradigm for rational SAM design that simultaneously maximizes efficiency and long-term operational durability.
- 23 September 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (39) , 42246-42255
Crystallographic Alignment of α-FAPbI3 {100} Facets at the Buried Interface for Efficient Perovskite Photovoltaics
At the SnO2/perovskite buried interface, the poorly controlled crystallization of black-phase α-FAPbI3 typically gives rise to a disordered interfacial facet configuration involving {100}, {110}, and {111} facets, which introduces a significant energetic barrier for electron injection and obscures the facet-dependent mechanisms governing carrier extraction and transport. Here, we identify buried-interface molecules that integrate a perovskite-interacting heterocycle with a substrate-anchoring carboxyl group, enabling the ordered alignment of {100} facets at the SnO2/perovskite interface. This crystallographic regulation reduces the interfacial electrostatic potential discontinuity, accelerates carrier extraction, and suppresses nonradiative recombination. As a result, the n-i-p perovskite solar cells achieve a power conversion efficiency of 26.65%, with a stabilized efficiency of 26.03%. Under maximum power point tracking in a nitrogen atmosphere at ∼50 °C under one-sun illumination, the devices retain over 91% of their initial efficiency after 2400 h of continuous operation, indicating enhanced operational stability.
- 23 September 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (39) , 42246-42255
Crystallographic Alignment of α-FAPbI3 {100} Facets at the Buried Interface for Efficient Perovskite Photovoltaics
At the SnO2/perovskite buried interface, the poorly controlled crystallization of black-phase α-FAPbI3 typically gives rise to a disordered interfacial facet configuration involving {100}, {110}, and {111} facets, which introduces a significant energetic barrier for electron injection and obscures the facet-dependent mechanisms governing carrier extraction and transport. Here, we identify buried-interface molecules that integrate a perovskite-interacting heterocycle with a substrate-anchoring carboxyl group, enabling the ordered alignment of {100} facets at the SnO2/perovskite interface. This crystallographic regulation reduces the interfacial electrostatic potential discontinuity, accelerates carrier extraction, and suppresses nonradiative recombination. As a result, the n-i-p perovskite solar cells achieve a power conversion efficiency of 26.65%, with a stabilized efficiency of 26.03%. Under maximum power point tracking in a nitrogen atmosphere at ∼50 °C under one-sun illumination, the devices retain over 91% of their initial efficiency after 2400 h of continuous operation, indicating enhanced operational stability.
- Open Access
- 11 September 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Mitigating tin ion migration and reinforcing buried interface via synergistic polymer-modified tin oxide
The buried interface between the charge transport layer and the overlying perovskite absorber is critical yet difficult to probe in perovskite solar cells. Because light enters through the transparent substrate and is predominantly absorbed near this region, photo-induced degradation processes are partially initiated at the hidden buried interface. Here, we reveal that instability at the buried SnO 2 /perovskite interface triggers structural and chemical decomposition of the perovskite layer. To address this issue, we introduce polymeric interlayers that simultaneously reinforce interfacial bonding and suppress tin-ion migration. Poly(1-ethenylpyrrolidine-2,5-dione) (PED) forms a robust and chemically compatible interface, yielding enhanced phase purity, reduced defect density, and significantly mitigated tin diffusion. These findings identify the buried SnO 2 /perovskite interface as a key degradation-sensitive region under light aging and highlight interfacial polymer design as an effective strategy for improving the intrinsic stability of perovskite photovoltaics.
- 11 September 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessMitigating tin ion migration and reinforcing buried interface via synergistic polymer-modified tin oxide
The buried interface between the charge transport layer and the overlying perovskite absorber is critical yet difficult to probe in perovskite solar cells. Because light enters through the transparent substrate and is predominantly absorbed near this region, photo-induced degradation processes are partially initiated at the hidden buried interface. Here, we reveal that instability at the buried SnO 2 /perovskite interface triggers structural and chemical decomposition of the perovskite layer. To address this issue, we introduce polymeric interlayers that simultaneously reinforce interfacial bonding and suppress tin-ion migration. Poly(1-ethenylpyrrolidine-2,5-dione) (PED) forms a robust and chemically compatible interface, yielding enhanced phase purity, reduced defect density, and significantly mitigated tin diffusion. These findings identify the buried SnO 2 /perovskite interface as a key degradation-sensitive region under light aging and highlight interfacial polymer design as an effective strategy for improving the intrinsic stability of perovskite photovoltaics.
- 27 July 2026
- Published by Springer Nature in Nature
- Vol. 657 (8130) , 121-126
Phase-homogeneous mixed-halide perovskites for stable tandem photovoltaics
- 27 July 2026
- Published by Springer Nature in Nature
- Vol. 657 (8130) , 121-126
Phase-homogeneous mixed-halide perovskites for stable tandem photovoltaics
- Open Access
- 17 July 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (65) , e77171
Aromatic Cage Mediated Surfacial Passivation for Photovoltaic Perovskites
The chemical imperative of surface passivation for perovskite solar cells (PSCs) is hindered by the non‐complementary mechanisms employed by current aliphatic and aromatic ammonium halides. Even the widely used aromatic passivator 2‑(4‑fluorophenyl)ethylammonium iodide (FPEAI) faces efficiency limitations due to residual lead defects and interfacial charge‑transport barriers. Through mechanistic analysis of the functional moieties in FPEAI, we designed and synthesized novel passivation molecules, elucidating the respective roles of lead‑chelation, π‑conjugation, and steric hindrance in defect suppression. The optimized molecule 2‐(methylthio)ethoxy‐p‐phenylene ethylammonium iodide (OSPEAI) forms a coordinative cage‑like architecture around Pb 2 + sites via synergistic aliphatic‑chain and benzene‑ring interactions, effectively passivating lead‑related defects and inhibiting non‑radiative recombination. As a result, OSPEAI‑modified PSCs achieved a power conversion efficiency of 26.35% with enhanced operational stability, offering innovative molecular‑design insights for chemical passivation in perovskite photovoltaics.
- 17 July 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (65) , e77171
Open AccessAromatic Cage Mediated Surfacial Passivation for Photovoltaic Perovskites
The chemical imperative of surface passivation for perovskite solar cells (PSCs) is hindered by the non‐complementary mechanisms employed by current aliphatic and aromatic ammonium halides. Even the widely used aromatic passivator 2‑(4‑fluorophenyl)ethylammonium iodide (FPEAI) faces efficiency limitations due to residual lead defects and interfacial charge‑transport barriers. Through mechanistic analysis of the functional moieties in FPEAI, we designed and synthesized novel passivation molecules, elucidating the respective roles of lead‑chelation, π‑conjugation, and steric hindrance in defect suppression. The optimized molecule 2‐(methylthio)ethoxy‐p‐phenylene ethylammonium iodide (OSPEAI) forms a coordinative cage‑like architecture around Pb 2 + sites via synergistic aliphatic‑chain and benzene‑ring interactions, effectively passivating lead‑related defects and inhibiting non‑radiative recombination. As a result, OSPEAI‑modified PSCs achieved a power conversion efficiency of 26.35% with enhanced operational stability, offering innovative molecular‑design insights for chemical passivation in perovskite photovoltaics.
- Open Access
- 11 July 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (63) , e77018
Stabilizing Buried Contacts in Hybrid‐Deposited Perovskite Solar Cells via Amidinium‐Based Passivation
Monolithic integration of perovskite solar cells (PSCs) with textured silicon is essential for commercializing perovskite/silicon tandem photovoltaics. Hybrid evaporation–solution processing enables conformal perovskite deposition on textured surfaces, but residual PbI 2 at the buried interface limits performance and stability. Here, we introduce 2,4‐difluorobenzamidine hydrochloride (2,4‐FPhFACl) into self‐assembled monolayers (SAMs) as a buried hole‐selective contact to improve interface quality. The amidinium groups strongly interact with the perovskite, suppressing thermal decomposition and eliminating PbI 2 formation. This approach enhances surface passivation and energy‐level alignment. Wide‐bandgap (1.65 eV) devices achieve a power conversion efficiency (PCE) of 20.19% and retain 80% efficiency after 2000 h at 85°C. Applied to fully textured perovskite/silicon tandems, this strategy delivers a champion PCE of 29.91% (1.04 cm 2 ), offering a scalable route to high‐performance tandem photovoltaics.
- 11 July 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (63) , e77018
Open AccessStabilizing Buried Contacts in Hybrid‐Deposited Perovskite Solar Cells via Amidinium‐Based Passivation
Monolithic integration of perovskite solar cells (PSCs) with textured silicon is essential for commercializing perovskite/silicon tandem photovoltaics. Hybrid evaporation–solution processing enables conformal perovskite deposition on textured surfaces, but residual PbI 2 at the buried interface limits performance and stability. Here, we introduce 2,4‐difluorobenzamidine hydrochloride (2,4‐FPhFACl) into self‐assembled monolayers (SAMs) as a buried hole‐selective contact to improve interface quality. The amidinium groups strongly interact with the perovskite, suppressing thermal decomposition and eliminating PbI 2 formation. This approach enhances surface passivation and energy‐level alignment. Wide‐bandgap (1.65 eV) devices achieve a power conversion efficiency (PCE) of 20.19% and retain 80% efficiency after 2000 h at 85°C. Applied to fully textured perovskite/silicon tandems, this strategy delivers a champion PCE of 29.91% (1.04 cm 2 ), offering a scalable route to high‐performance tandem photovoltaics.
- 6 July 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (37) , e7090517
Molecular Lubricant Mitigates Self‐Assembled Monolayer Aggregation in Perovskite Photovoltaics
Molecular aggregation in self‐assembled monolayers (SAMs) remains a critical bottleneck for inverted perovskite solar cells (PSCs), particularly at buried interfaces where this phenomenon induces detrimental defects that severely compromise photovoltaic performance and operational stability. Addressing this challenge requires the development of novel functional materials capable of precisely regulating molecular packing in SAMs and suppressing their aggregation, which is a key research direction for enhancing device efficiency and durability. Herein, we introduce 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMIMBF 4 ), an ionic liquid employed as a molecular lubricant that effectively suppresses SAM aggregation through steric‐electrostatic dual modulation. The steric hindrance exerted by BMIMBF 4 physically prevents close packing of adjacent SAM molecules, while its ionized moieties form electrostatic shielding that disrupts π–π stacking interactions and reduces micellar dimensions. Consequently, the fabricated PSCs deliver a champion power conversion efficiency (PCE) of 26.82% and retain 92.3% of their initial efficiency after 800 h of continuous operation at 85°C under AM 1.5G illumination. This work presents the novel concept of molecular lubricants that suppress SAM aggregation via synergistic steric and electrostatic modulation, enabling uniform and densely packed SAM anchoring for high‐performance PSCs.
- 6 July 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (37) , e7090517
Molecular Lubricant Mitigates Self‐Assembled Monolayer Aggregation in Perovskite Photovoltaics
Molecular aggregation in self‐assembled monolayers (SAMs) remains a critical bottleneck for inverted perovskite solar cells (PSCs), particularly at buried interfaces where this phenomenon induces detrimental defects that severely compromise photovoltaic performance and operational stability. Addressing this challenge requires the development of novel functional materials capable of precisely regulating molecular packing in SAMs and suppressing their aggregation, which is a key research direction for enhancing device efficiency and durability. Herein, we introduce 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMIMBF 4 ), an ionic liquid employed as a molecular lubricant that effectively suppresses SAM aggregation through steric‐electrostatic dual modulation. The steric hindrance exerted by BMIMBF 4 physically prevents close packing of adjacent SAM molecules, while its ionized moieties form electrostatic shielding that disrupts π–π stacking interactions and reduces micellar dimensions. Consequently, the fabricated PSCs deliver a champion power conversion efficiency (PCE) of 26.82% and retain 92.3% of their initial efficiency after 800 h of continuous operation at 85°C under AM 1.5G illumination. This work presents the novel concept of molecular lubricants that suppress SAM aggregation via synergistic steric and electrostatic modulation, enabling uniform and densely packed SAM anchoring for high‐performance PSCs.