Marc Taillefer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Marc Taillefer has a total of 136 co-authors. Here are the top co-authors by number of shared publications:
- Florian Monnier
École Nationale Supérieure de Chimie de Montpellier
27 shared publications - Alexis Prieto
ICGM, Univ Montpellier, CNRS, ENSCM
11 shared publications Armelle Ouali
Laboratoire de Chimie de Coordination CNRS UPR 8241 BP 44099 205 route de Narbonne 31077 Toulouse Cedex 04 France and Université de Toulouse UPS, INPT, LCC 31077 Toulouse France
11 shared publications- Florian Jaroschik
ICGM, Univ Montpellier, CNRS, ENSCM, 34090 Montpellier, France
11 shared publications Ning Xia
CNRS, UMR 5253, Institut Charles Gerhardt Montpellier AM2N, ENSCM, 8, rue de l'Ecole Normale, 34296 Montpellier Cedex 5 (France), Fax: (+33) 467-144-319
10 shared publicationsRémi Blieck
Ecole Nationale Supérieure de Chimie de Montpellier, Institut Charles Gerhardt Montpellier UMR 5253, Univ. Montpellier, CNRS, ENSCM, 1919 route de Mende, 34293 Montpellier, France
9 shared publications
Latest Publications
- Open Access
- 23 March 2026
- Published by Wiley in Advanced Synthesis & Catalysis
- Vol. 368 (7)
Direct Introduction of Fluorocyclopropyl Groups via Energy Transfer Catalysis
This study presents an efficient and straightforward method for the direct incorporation of fluorinated cyclopropyl moieties via energy‐transfer catalysis. The approach leverages the reactivity of a diverse range of oxime esters functionalized with fluorinated cyclopropyl groups, enabling the selective formation of the desired products under mild conditions.
- 23 March 2026
- Published by Wiley in Advanced Synthesis & Catalysis
- Vol. 368 (7)
Open AccessDirect Introduction of Fluorocyclopropyl Groups via Energy Transfer Catalysis
This study presents an efficient and straightforward method for the direct incorporation of fluorinated cyclopropyl moieties via energy‐transfer catalysis. The approach leverages the reactivity of a diverse range of oxime esters functionalized with fluorinated cyclopropyl groups, enabling the selective formation of the desired products under mild conditions.
- Open Access
- 17 February 2026
- Published by Wiley in Chemistry – A European Journal
- Vol. 32 (17) , e70795
Generation of a Ground‐State Electron Donor Utilizing Stored Light Energy
This study presents a process for generating potent ground‐state electron donors using chemically stored light energy. Our strategy leverages light energy through high‐energy vicinal diols produced by the photodimerization of diaryl ketones. Under basic conditions, these diols can produce dianions with potentials near −2.7 V, which further act as strong organic reductants. These reductants demonstrate a high capacity for effectively reducing recalcitrant substrates at room temperature, including electron‐rich aryl bromides, alkyl iodides, and sulfonamide compounds. Mechanistic investigations, supported by density functional theory (DFT) calculations, confirm both the formation of these dianions and their exceptional electron‐donating properties.
- 17 February 2026
- Published by Wiley in Chemistry – A European Journal
- Vol. 32 (17) , e70795
Open AccessGeneration of a Ground‐State Electron Donor Utilizing Stored Light Energy
This study presents a process for generating potent ground‐state electron donors using chemically stored light energy. Our strategy leverages light energy through high‐energy vicinal diols produced by the photodimerization of diaryl ketones. Under basic conditions, these diols can produce dianions with potentials near −2.7 V, which further act as strong organic reductants. These reductants demonstrate a high capacity for effectively reducing recalcitrant substrates at room temperature, including electron‐rich aryl bromides, alkyl iodides, and sulfonamide compounds. Mechanistic investigations, supported by density functional theory (DFT) calculations, confirm both the formation of these dianions and their exceptional electron‐donating properties.
- Open Access
- 22 September 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (21) , e202501478
A Radical‐Based, Transition Metal‐Free Approach for Diaryl Ketone Synthesis
Diaryl ketones represent a pivotal class of compounds, widely used in pharmaceuticals, agrochemicals, and materials science. Driven by the urgent need for safer and more sustainable synthetic methodologies, developing innovative approaches in this area has become a critical priority for both academia and industry. In this context, a straightforward yet novel one‐pot strategy for synthesizing a broad array of diaryl ketones, including valuable target molecules, is presented. This approach diverges from conventional methods by employing a radical process, in which aryl halides react with benzonitriles in a basic medium, relying exclusively on the organic reductant pair KO t Bu/DMA and air as the oxidant. Mechanistic studies suggest that the KO t Bu/DMA system triggers the generation of aryl radicals, thereby initiating the process. This method stands out by overcoming key limitations of conventional approaches, notably avoiding corrosive reagents, toxic or expensive catalysts, peroxides, and hazardous carbon monoxide, thus aligning with the shift toward safer, more sustainable alternative synthetic strategies.
- 22 September 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (21) , e202501478
Open AccessA Radical‐Based, Transition Metal‐Free Approach for Diaryl Ketone Synthesis
Diaryl ketones represent a pivotal class of compounds, widely used in pharmaceuticals, agrochemicals, and materials science. Driven by the urgent need for safer and more sustainable synthetic methodologies, developing innovative approaches in this area has become a critical priority for both academia and industry. In this context, a straightforward yet novel one‐pot strategy for synthesizing a broad array of diaryl ketones, including valuable target molecules, is presented. This approach diverges from conventional methods by employing a radical process, in which aryl halides react with benzonitriles in a basic medium, relying exclusively on the organic reductant pair KO t Bu/DMA and air as the oxidant. Mechanistic studies suggest that the KO t Bu/DMA system triggers the generation of aryl radicals, thereby initiating the process. This method stands out by overcoming key limitations of conventional approaches, notably avoiding corrosive reagents, toxic or expensive catalysts, peroxides, and hazardous carbon monoxide, thus aligning with the shift toward safer, more sustainable alternative synthetic strategies.
- Open Access
- 10 May 2025
- Published by American Chemical Society (ACS) in ACS Organic & Inorganic Au
- Vol. 5 (3) , 221-227
Red Light and Supersilane: A Novel Pathway for Hydrofunctionalizations and Giese Reactions
Herein, we describe the photoredox activation of silanes under deep-red irradiation with or without osmium-based photocatalysts to generate silyl radicals. These radicals were further employed for achieving various reactivities previously unexplored in the red-light spectral region, such as hydrosilylation, hydrosulfonylation, and Giese reaction. Overall, the developed deep-red protocols allow for the preparation of a diverse array of high-value molecules.
- 10 May 2025
- Published by American Chemical Society (ACS) in ACS Organic & Inorganic Au
- Vol. 5 (3) , 221-227
Open AccessRed Light and Supersilane: A Novel Pathway for Hydrofunctionalizations and Giese Reactions
Herein, we describe the photoredox activation of silanes under deep-red irradiation with or without osmium-based photocatalysts to generate silyl radicals. These radicals were further employed for achieving various reactivities previously unexplored in the red-light spectral region, such as hydrosilylation, hydrosulfonylation, and Giese reaction. Overall, the developed deep-red protocols allow for the preparation of a diverse array of high-value molecules.
- 21 April 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (9) , 7458-7469
Nature of Reactive Mn–Oxygen Complexes in the Catalytic Oxidative Coupling of Aryllithiums: A Combined Mass Spectrometric and Theoretical Approach
- 21 April 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (9) , 7458-7469
Nature of Reactive Mn–Oxygen Complexes in the Catalytic Oxidative Coupling of Aryllithiums: A Combined Mass Spectrometric and Theoretical Approach
- 7 January 2025
- Published by Georg Thieme Verlag KG in Synthesis
- Vol. 57 (13) , 2052-2062
Photocatalytic Strategies for the Synthesis of Xanthates and Their Analogues
Sulfur-containing organic molecules, particularly xanthates (dithiocarbonates) and dithiocarbamates, are valuable intermediates in synthetic chemistry and the development of bioactive molecules. For instance, xanthates are potent carbon-radical precursors that can be engaged in diverse transformations, including the 1,2-difunctionalization of alkenes and other functionalizations. However, traditional synthetic methods for these compounds have been limited in efficiency and diversity. This Short Review focuses on novel photochemical procedures for generating xanthates and dithiocarbamates, discussing their advantages and disadvantages. Two main strategies emerge from the literature: (1) Three-component reactions involving the in situ formation of carbodithioate anions, and (2) two-component reactions (direct xanthylation and thiocarbamoylthiolation) using ex situ prepared xanthate and dithiocarbamate sources.1 Introduction2 Three-Component Transformations3 Two-Component Transformations4 Miscellaneous5 Conclusion
- 7 January 2025
- Published by Georg Thieme Verlag KG in Synthesis
- Vol. 57 (13) , 2052-2062
Photocatalytic Strategies for the Synthesis of Xanthates and Their Analogues
Sulfur-containing organic molecules, particularly xanthates (dithiocarbonates) and dithiocarbamates, are valuable intermediates in synthetic chemistry and the development of bioactive molecules. For instance, xanthates are potent carbon-radical precursors that can be engaged in diverse transformations, including the 1,2-difunctionalization of alkenes and other functionalizations. However, traditional synthetic methods for these compounds have been limited in efficiency and diversity. This Short Review focuses on novel photochemical procedures for generating xanthates and dithiocarbamates, discussing their advantages and disadvantages. Two main strategies emerge from the literature: (1) Three-component reactions involving the in situ formation of carbodithioate anions, and (2) two-component reactions (direct xanthylation and thiocarbamoylthiolation) using ex situ prepared xanthate and dithiocarbamate sources.1 Introduction2 Three-Component Transformations3 Two-Component Transformations4 Miscellaneous5 Conclusion
- Open Access
- 14 November 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (68) , e202401851
Visible‐Light Organic Photosensitizers Based on 2‐(2‐Aminophenyl)benzothiazoles for Photocycloaddition Reactions
We have studied 2‐(2‐aminophenyl)benzothiazole and related derivatives for their photophysical properties in view of employing them as new and readily tunable organic photocatalysts. Their triplet energies were estimated by DFT calculations to be in the range of 52–57 kcal mol−1, suggesting their suitability for the [2+2] photocycloaddition of unsaturated acyl imidazoles with styrene derivatives. Experimental studies have shown that 2–(2–aminophenyl)benzothiazoles comprising alkylamino groups (NHMe, NHiPr) or the native amino group provide the best photocatalytic results in these visible‐light mediated [2+2] reactions without the need of any additives, yielding a range of cyclobutane derivatives. A combined experimental and theoretical approach has provided insights into the underlying triplet‐triplet energy transfer process.
- 14 November 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (68) , e202401851
Open AccessVisible‐Light Organic Photosensitizers Based on 2‐(2‐Aminophenyl)benzothiazoles for Photocycloaddition Reactions
We have studied 2‐(2‐aminophenyl)benzothiazole and related derivatives for their photophysical properties in view of employing them as new and readily tunable organic photocatalysts. Their triplet energies were estimated by DFT calculations to be in the range of 52–57 kcal mol−1, suggesting their suitability for the [2+2] photocycloaddition of unsaturated acyl imidazoles with styrene derivatives. Experimental studies have shown that 2–(2–aminophenyl)benzothiazoles comprising alkylamino groups (NHMe, NHiPr) or the native amino group provide the best photocatalytic results in these visible‐light mediated [2+2] reactions without the need of any additives, yielding a range of cyclobutane derivatives. A combined experimental and theoretical approach has provided insights into the underlying triplet‐triplet energy transfer process.
- Open Access
- 25 October 2024
- Published by Wiley in ChemSusChem
- Vol. 18 (2) , e202401450
Copper‐Catalysed Synthesis of (E)‐Allylic Organophosphorus Derivatives: A Low Toxic, Mild, Economical, and Ligand‐Free Method
Organophosphorus compounds are fundamental for the chemical industry due to their broad applications across multiple sectors, including pharmaceuticals, agrochemicals, and materials science. Despite their high importance, the sustainable and cost‐effective synthesis of organophoshoryl derivatives remains very challenging. Here, we report the first successful regio‐ and stereoselective hydrophosphorylation of terminal allenamides using an affordable copper catalyst system. This reaction offers an efficient protocol for the synthesis of (E)‐allylic organophosphorus derivatives from various types of P‐nucleophiles, such as H‐phosphonates, H‐phosphinates, and secondary phosphine oxides. Key advantages of this ligand‐free and atom‐economic strategy include low toxicity of the Cu‐based catalyst, cost effectiveness, mild reaction conditions, and experimental simplicity, making it competitive with methods that use toxic and expensive Pd‐based catalysts. In an effort to comprehend this process, we conducted extensive DFT calculations on this system to uncover the mechanistic insights of this process.
- 25 October 2024
- Published by Wiley in ChemSusChem
- Vol. 18 (2) , e202401450
Open AccessCopper‐Catalysed Synthesis of (E)‐Allylic Organophosphorus Derivatives: A Low Toxic, Mild, Economical, and Ligand‐Free Method
Organophosphorus compounds are fundamental for the chemical industry due to their broad applications across multiple sectors, including pharmaceuticals, agrochemicals, and materials science. Despite their high importance, the sustainable and cost‐effective synthesis of organophoshoryl derivatives remains very challenging. Here, we report the first successful regio‐ and stereoselective hydrophosphorylation of terminal allenamides using an affordable copper catalyst system. This reaction offers an efficient protocol for the synthesis of (E)‐allylic organophosphorus derivatives from various types of P‐nucleophiles, such as H‐phosphonates, H‐phosphinates, and secondary phosphine oxides. Key advantages of this ligand‐free and atom‐economic strategy include low toxicity of the Cu‐based catalyst, cost effectiveness, mild reaction conditions, and experimental simplicity, making it competitive with methods that use toxic and expensive Pd‐based catalysts. In an effort to comprehend this process, we conducted extensive DFT calculations on this system to uncover the mechanistic insights of this process.
- 24 October 2024
- Published by American Chemical Society (ACS) in Organic Letters
- Vol. 26 (44) , 9574-9579
Decarboxylative Xanthylation under Photocatalytic Conditions
Xanthates are widely used in organic synthesis for the construction of various molecules and have numerous applications as bioactive compounds. Here, we present their preparation via a straightforward photocatalytic decarboxylative xanthylation process involving readily available oxime esters and xanthate dimers. This approach provides access to a wide variety of xanthate compounds in moderate to good yields, including xanthates derived from relevant pharmaceutical and bioactive molecules.
- 24 October 2024
- Published by American Chemical Society (ACS) in Organic Letters
- Vol. 26 (44) , 9574-9579
Decarboxylative Xanthylation under Photocatalytic Conditions
Xanthates are widely used in organic synthesis for the construction of various molecules and have numerous applications as bioactive compounds. Here, we present their preparation via a straightforward photocatalytic decarboxylative xanthylation process involving readily available oxime esters and xanthate dimers. This approach provides access to a wide variety of xanthate compounds in moderate to good yields, including xanthates derived from relevant pharmaceutical and bioactive molecules.
- 12 December 2023
- Published by Royal Society of Chemistry (RSC) in Organic Chemistry Frontiers
- Vol. 11 (3) , 775-780
Transition metal free C(sp3)–C(sp3) coupling between alcohols and N-heteroarenes via a dehydrogenative SET/HAT process
Transition metal free activation of alcohols and C(sp3)H–C(sp3)H coupling with N-heteroarenes to access olefins was performed. The reaction would proceed via a combined SET/HAT dehydrogenative process.
- 12 December 2023
- Published by Royal Society of Chemistry (RSC) in Organic Chemistry Frontiers
- Vol. 11 (3) , 775-780
Transition metal free C(sp3)–C(sp3) coupling between alcohols and N-heteroarenes via a dehydrogenative SET/HAT process
Transition metal free activation of alcohols and C(sp3)H–C(sp3)H coupling with N-heteroarenes to access olefins was performed. The reaction would proceed via a combined SET/HAT dehydrogenative process.