Shahrzad Khoramnejadian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shahrzad Khoramnejadian has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Hossien Saghi
Non-Communicable Diseases Research Center, Sabzevar University of Medical Sciences, Sabzevar, Iran
2 shared publications - Seyed Mostafa Khezri
Faculty of Environment and Energy, Tehran Science and Research Branch, Islamic Azad University, Tehran, Iran
2 shared publications A. Dehghanbanadaki
1 shared publicationA. Khodkar
Islamic Azad University
1 shared publicationAbdolreza Karbasi
Department of Environmental Engineering, Faculty of Environment, Tehran University, Tehran, Iran
1 shared publication- Abdolreza Karbassi
Department of Environmental Engineering, Faculty of Environment, University of Tehran, Tehran, Iran
1 shared publication
Latest Publications
- 13 November 2026
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 23 (12)
Retention of diesel fuel in pine sawdust amended sandy soil under column flushing
- 13 November 2026
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 23 (12)
Retention of diesel fuel in pine sawdust amended sandy soil under column flushing
- 1 October 2024
- Published by Emerald Publishing in Journal of Environmental Engineering and Science
- Vol. 19 (4) , 255-261
Correlation of soil magnetic susceptibility with heavy metals and physico-chemical profile
The present study was conducted to determine magnetic susceptibility and its correlation with the concentration of selected heavy metals, including arsenic, chromium, cadmium and lead, as well as the physico-chemical properties of topsoil samples collected from District 5 of Tehran Municipality, Iran. The specimens were collected from 13 stations (0–10 cm depth), and the location of the sampling points was recorded as well using the Global Positioning System. The specimens were then analysed for physico-chemical properties, heavy metal concentration (by atomic absorption spectrometry) and in situ magnetic susceptibility at low frequency (χ lf, using a Bartington MS2 dual-frequency sensor). According to the results, the highest and lowest χ lf values were 34.1 × 10−8 and 16.3 × 10−8 m3/kg at stations 3 (Azadi bus station) and 11 (Jannatabad neighbourhood), respectively. A significant correlation was found between χ lf and the concentration of lead and chromium (P < 0.05). Moreover, there was a positive and significant correlation between χ lf and the soil organic matter in the study area (P < 0.01). Based on the research findings, the magnetic susceptibility measure can be used to evaluate quickly the level of soil contamination with heavy metals and also to monitor the changes in soil organic matter.
- 1 October 2024
- Published by Emerald Publishing in Journal of Environmental Engineering and Science
- Vol. 19 (4) , 255-261
Correlation of soil magnetic susceptibility with heavy metals and physico-chemical profile
The present study was conducted to determine magnetic susceptibility and its correlation with the concentration of selected heavy metals, including arsenic, chromium, cadmium and lead, as well as the physico-chemical properties of topsoil samples collected from District 5 of Tehran Municipality, Iran. The specimens were collected from 13 stations (0–10 cm depth), and the location of the sampling points was recorded as well using the Global Positioning System. The specimens were then analysed for physico-chemical properties, heavy metal concentration (by atomic absorption spectrometry) and in situ magnetic susceptibility at low frequency (χ lf, using a Bartington MS2 dual-frequency sensor). According to the results, the highest and lowest χ lf values were 34.1 × 10−8 and 16.3 × 10−8 m3/kg at stations 3 (Azadi bus station) and 11 (Jannatabad neighbourhood), respectively. A significant correlation was found between χ lf and the concentration of lead and chromium (P < 0.05). Moreover, there was a positive and significant correlation between χ lf and the soil organic matter in the study area (P < 0.01). Based on the research findings, the magnetic susceptibility measure can be used to evaluate quickly the level of soil contamination with heavy metals and also to monitor the changes in soil organic matter.
- 18 December 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (2) , 2857-2866
Assessment of landfill gases by LandGEM and energy recovery potential from municipal solid waste of Robat Karim
- 18 December 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (2) , 2857-2866
Assessment of landfill gases by LandGEM and energy recovery potential from municipal solid waste of Robat Karim
- 5 April 2021
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 19 (3) , 1131-1138
Potential of ammonium chloride-activated carbon for decomposition of penicillin G by catalytic ozonation process (COP)
- 5 April 2021
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 19 (3) , 1131-1138
Potential of ammonium chloride-activated carbon for decomposition of penicillin G by catalytic ozonation process (COP)
- 8 May 2020
- Published by Springer Nature in Journal of Environmental Health Science and Engineering
- Vol. 18 (2) , 483-493
Synthesis and characterization of an NH4CL-induced Eskanbil activated carbon (EAC) for the removal of penicillin G from contaminated water
Penicillin G (PG) is one of the most widely used antibiotics around the world. The release of PG in an aqueous solution leads to contamination of water resources. This study aimed to determine the efficiency of modified Eskanbil activated carbon for the removal of PG from aqueous solutions. The NH4Cl-induced activated carbon was synthesized by a simple method and used for the degradation of PG in contaminated water. Activated carbon was characterized by Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FESEM), and Brunauer–Emmett–Teller (BET) surface area analysis. The four main reaction parameters optimized in this study were pH, time, the concentration of the EAC (Eskanbil Activated Carbon), and initial PG concentration. The synthesized carbon was characterized and the results showed it as a mesoporous material with the BET specific surface area of 1473 m2/g and pore volume of 0.81 cm3/g. The maximum PG adsorption onto EAC was observed at the pH of 6. The PG removal of 33% at an EAC concentration of 0.1 g/L increased to 99.98% at an activated carbon concentration of 0.5 g/L. The isotherm and kinetic studies of PG removal by EAC showed that the Freundlich model (R2 > 0.995) and the pseudo-second-order (R2 > 0.983) equation represented the best fit with the adsorption data. EAC is recommended as a suitable and cost-efficient adsorbent for removing poisons, pharmaceuticals, and other emerging contaminants from water resources.
- 8 May 2020
- Published by Springer Nature in Journal of Environmental Health Science and Engineering
- Vol. 18 (2) , 483-493
Synthesis and characterization of an NH4CL-induced Eskanbil activated carbon (EAC) for the removal of penicillin G from contaminated water
Penicillin G (PG) is one of the most widely used antibiotics around the world. The release of PG in an aqueous solution leads to contamination of water resources. This study aimed to determine the efficiency of modified Eskanbil activated carbon for the removal of PG from aqueous solutions. The NH4Cl-induced activated carbon was synthesized by a simple method and used for the degradation of PG in contaminated water. Activated carbon was characterized by Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FESEM), and Brunauer–Emmett–Teller (BET) surface area analysis. The four main reaction parameters optimized in this study were pH, time, the concentration of the EAC (Eskanbil Activated Carbon), and initial PG concentration. The synthesized carbon was characterized and the results showed it as a mesoporous material with the BET specific surface area of 1473 m2/g and pore volume of 0.81 cm3/g. The maximum PG adsorption onto EAC was observed at the pH of 6. The PG removal of 33% at an EAC concentration of 0.1 g/L increased to 99.98% at an activated carbon concentration of 0.5 g/L. The isotherm and kinetic studies of PG removal by EAC showed that the Freundlich model (R2 > 0.995) and the pseudo-second-order (R2 > 0.983) equation represented the best fit with the adsorption data. EAC is recommended as a suitable and cost-efficient adsorbent for removing poisons, pharmaceuticals, and other emerging contaminants from water resources.
- 24 May 2019
- Published by Springer Nature in International Journal of Environmental Research
- Vol. 13 (5) , 801-811
Evaluation of Urban Soil Pollution: A Combined Approach of Toxic Metals and Polycyclic Aromatic Hydrocarbons (PAHs)
- 24 May 2019
- Published by Springer Nature in International Journal of Environmental Research
- Vol. 13 (5) , 801-811
Evaluation of Urban Soil Pollution: A Combined Approach of Toxic Metals and Polycyclic Aromatic Hydrocarbons (PAHs)
- 20 November 2018
- Published by Taylor & Francis in Human and Ecological Risk Assessment: An International Journal
- Vol. 26 (2) , 430-442
Urinary and air biomonitoring of occupational exposure to benzene in oil pit workers
The purpose of this study is to evaluate the personal exposure to benzene and its relationship with biomonitoring and quantitative risk assessment among the personnel working and living near oil pits. This study was conducted in one of oil subsidiary companies in Kharg in 2017. Airborne benzene exposure was evaluated over 8-h periods during work-shift by using personal active samplers. Urinary O-Cresol levels were determined using GC-FID for separation and detection. The highest mean concentration of airborne benzene was at monitoring location, A (0.53 ppm), monitoring location H (0.59 ppm) in the spring, monitoring location M (0.72 ppm) and monitoring location P (0.8 ppm) in the summer, which was more than suggested by the American Conference of Governmental Industrial Hygienists. No direct linear relationship was found between the concentration of airborne benzene, age, work experience, urinary creatinine, and O-Cresol in this study (p > .05). No significant difference was observed between urinary O-Cresol and benzene in occupational groups and different seasons (p > .05). The highest mean quantitative risk of cancers was observed in summer (1.21 ± 0.47). According to the results of this study, urinary biomarker O-Cresol is not a suitable measure for evaluating exposure to environmental benzene.
- 20 November 2018
- Published by Taylor & Francis in Human and Ecological Risk Assessment: An International Journal
- Vol. 26 (2) , 430-442
Urinary and air biomonitoring of occupational exposure to benzene in oil pit workers
The purpose of this study is to evaluate the personal exposure to benzene and its relationship with biomonitoring and quantitative risk assessment among the personnel working and living near oil pits. This study was conducted in one of oil subsidiary companies in Kharg in 2017. Airborne benzene exposure was evaluated over 8-h periods during work-shift by using personal active samplers. Urinary O-Cresol levels were determined using GC-FID for separation and detection. The highest mean concentration of airborne benzene was at monitoring location, A (0.53 ppm), monitoring location H (0.59 ppm) in the spring, monitoring location M (0.72 ppm) and monitoring location P (0.8 ppm) in the summer, which was more than suggested by the American Conference of Governmental Industrial Hygienists. No direct linear relationship was found between the concentration of airborne benzene, age, work experience, urinary creatinine, and O-Cresol in this study (p > .05). No significant difference was observed between urinary O-Cresol and benzene in occupational groups and different seasons (p > .05). The highest mean quantitative risk of cancers was observed in summer (1.21 ± 0.47). According to the results of this study, urinary biomarker O-Cresol is not a suitable measure for evaluating exposure to environmental benzene.
- 11 November 2018
- Published by SAGE Publications in Toxicology and Industrial Health
- Vol. 34 (12) , 842-859
Preparation and application of α-Fe2O3@MIL-101(Cr)@TiO2 based on metal–organic framework for photocatalytic degradation of paraquat
In this study, a new magnetic α-Fe2O3@MIL-101(Cr)@TiO2 photocatalyst was successfully synthesized. The material synthesized had been fully characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, vibrating sample magnetometry, transmission electron microscopy, and Brunauer–Emmett–Teller isotherm methods. The X-ray diffraction analysis corroborates that nanoparticles are polycrystalline with rhombohedral and tetragonal crystal structures for Fe2O3 and TiO2, respectively. In addition, the photocatalytic degradation of the herbicide paraquat in the presence of α-Fe2O3@MIL-101(Cr)@TiO2 under ultraviolet (UV) irradiation was studied. The effect of experimental parameters such as the initial concentration of catalyst, the pH, and the initial paraquat was investigated. The optimal conditions were achieved for concentration of catalyst 0.2 g L−1, pH 7, and concentration of paraquat 20 mg L−1. The photocatalytic degradation efficiency was 88.39% after 15 min with α-Fe2O3@MIL-101(Cr)@TiO2 under UV irradiation. The pseudo-second-order kinetic model for photocatalytic degradation of paraquat was obtained. The catalysts could be recovered and reused without any loss of efficiency for five times in the consequent reactions. To the best of our knowledge, this is the first report on the photocatalytic degradation of paraquat using new α-Fe2O3@MIL-101(Cr)@TiO2 photocatalyst under UV irradiation condition.
- 11 November 2018
- Published by SAGE Publications in Toxicology and Industrial Health
- Vol. 34 (12) , 842-859
Preparation and application of α-Fe2O3@MIL-101(Cr)@TiO2 based on metal–organic framework for photocatalytic degradation of paraquat
In this study, a new magnetic α-Fe2O3@MIL-101(Cr)@TiO2 photocatalyst was successfully synthesized. The material synthesized had been fully characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, vibrating sample magnetometry, transmission electron microscopy, and Brunauer–Emmett–Teller isotherm methods. The X-ray diffraction analysis corroborates that nanoparticles are polycrystalline with rhombohedral and tetragonal crystal structures for Fe2O3 and TiO2, respectively. In addition, the photocatalytic degradation of the herbicide paraquat in the presence of α-Fe2O3@MIL-101(Cr)@TiO2 under ultraviolet (UV) irradiation was studied. The effect of experimental parameters such as the initial concentration of catalyst, the pH, and the initial paraquat was investigated. The optimal conditions were achieved for concentration of catalyst 0.2 g L−1, pH 7, and concentration of paraquat 20 mg L−1. The photocatalytic degradation efficiency was 88.39% after 15 min with α-Fe2O3@MIL-101(Cr)@TiO2 under UV irradiation. The pseudo-second-order kinetic model for photocatalytic degradation of paraquat was obtained. The catalysts could be recovered and reused without any loss of efficiency for five times in the consequent reactions. To the best of our knowledge, this is the first report on the photocatalytic degradation of paraquat using new α-Fe2O3@MIL-101(Cr)@TiO2 photocatalyst under UV irradiation condition.
- 10 August 2018
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 16 (10) , 5741-5756
A designed experimental approach for photocatalytic degradation of paraquat using α-Fe2O3@MIL-101(Cr)@TiO2 based on metal–organic framework
- 10 August 2018
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 16 (10) , 5741-5756
A designed experimental approach for photocatalytic degradation of paraquat using α-Fe2O3@MIL-101(Cr)@TiO2 based on metal–organic framework
- 1 January 2017
- Published by ALOKI Ltd in Applied Ecology and Environmental Research
- Vol. 15 (1) , 439-444
DETERMINATION OF LEAD AND CADMIUM IN THE WATER OF THE DAMAVAND RIVER, IRAN
- 1 January 2017
- Published by ALOKI Ltd in Applied Ecology and Environmental Research
- Vol. 15 (1) , 439-444
DETERMINATION OF LEAD AND CADMIUM IN THE WATER OF THE DAMAVAND RIVER, IRAN