Weidong Ruan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Weidong Ruan has a total of 115 co-authors. Here are the top co-authors by number of shared publications:
Bing Zhao
15 shared publications- Bing Zhao
Jilin University
12 shared publications Yanan Wang
College of Energy and Environmental Engineering
11 shared publicationsTieli Zhou
8 shared publicationsXu Wang
State Key Laboratory of Supramolecular Structure and Materials, Institute of Theoretical Chemistry, College of Chemistry, Jilin University, Changchun 130012, P. R. China
8 shared publications- Young Mee Jung
Kangwon National University
6 shared publications
Latest Publications
- Open Access
- 19 August 2026
- Published by Elsevier in SSRN Electronic Journal
Fabrication and characterization of sodium alginate gel microspheres embedded with Luria-Bertani broth for sustained release in bacterial cultivation
Calcium-alginate gel beads were investigated as carriers for the gradual delivery of Luria–Bertani (LB) medium during bacterial culture. Beads were prepared by manual extrusion of sodium alginate (SA) formulations into CaCl2 solutions and characterized by compression, swelling, microscopy, spectroscopy, thermal analysis, rheology, encapsulation efficiency, and aqueous release tests. The available data show formulation-dependent bead hardness and swelling and an LB encapsulation efficiency that reached approximately 75% at an intermediate nominal LB level. After 12 h, cumulative release was 46.17 ± 0.42% from beads prepared with 1.5% SA and 60.13 ± 0.60% from beads prepared with 2.0% SA. Ritger–Peppas fits gave release exponents of approximately 0.295 and 0.335, respectively, consistent with diffusion-dominated release within the empirical model. Single representative growth curves for Escherichia coli and Staphylococcus aureus showed slower biomass accumulation when nutrient-loaded beads were used instead of freely dissolved broth. These growth observations are exploratory because independent biological replicates were not available. Overall, the results support calcium-alginate beads as a formulation-dependent nutrient-release platform, while direct transport measurements and independently replicated culture experiments are required before claims of predictive growth control can be made.
- 19 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessFabrication and characterization of sodium alginate gel microspheres embedded with Luria-Bertani broth for sustained release in bacterial cultivation
Calcium-alginate gel beads were investigated as carriers for the gradual delivery of Luria–Bertani (LB) medium during bacterial culture. Beads were prepared by manual extrusion of sodium alginate (SA) formulations into CaCl2 solutions and characterized by compression, swelling, microscopy, spectroscopy, thermal analysis, rheology, encapsulation efficiency, and aqueous release tests. The available data show formulation-dependent bead hardness and swelling and an LB encapsulation efficiency that reached approximately 75% at an intermediate nominal LB level. After 12 h, cumulative release was 46.17 ± 0.42% from beads prepared with 1.5% SA and 60.13 ± 0.60% from beads prepared with 2.0% SA. Ritger–Peppas fits gave release exponents of approximately 0.295 and 0.335, respectively, consistent with diffusion-dominated release within the empirical model. Single representative growth curves for Escherichia coli and Staphylococcus aureus showed slower biomass accumulation when nutrient-loaded beads were used instead of freely dissolved broth. These growth observations are exploratory because independent biological replicates were not available. Overall, the results support calcium-alginate beads as a formulation-dependent nutrient-release platform, while direct transport measurements and independently replicated culture experiments are required before claims of predictive growth control can be made.
- 13 August 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (34) , 12006-12015
Postsynthetic Zn(II) Species Modification Regulates the Surface States of TiO2 Nanoparticles for Resonance-Assisted SERS
Engineering interfacial electronic states at the nanoscale is a powerful yet underdeveloped strategy for improving the selectivity of semiconductor-based molecular sensing. Here, we report a simple postsynthetic surface-associated Zn(II) species modification approach to engineer the surface states of TiO2 nanoparticles for resonance-assisted surface-enhanced Raman scattering (SERS). Structural and spectroscopic analyses indicate that Zn(II)-containing species are mainly associated with the TiO2 surface rather than incorporated into the lattice, allowing the nanoparticle framework and morphology to be preserved while modulating the near-surface electronic structure. This nanoscale surface-state engineering enriches defect-related states and narrows the effective band gap of TiO2, leading to improved energy-level matching with methylene blue (MB) under 532 nm excitation. As a result, the Zn-TiO2 substrate exhibits an enhanced Raman response relative to bare TiO2, with a maximum enhancement factor of 1.22 × 104 and acceptable reproducibility. More importantly, the selective amplification of specific MB vibrational bands indicates that the dominant contribution arises from a surface-state-mediated resonance-assisted charge-transfer process. Rather than relying on bulk doping, oxygen-vacancy engineering, or complex heterostructures, this work establishes surface metal-species association as a mild and structurally preserving route for tailoring semiconductor interfacial states. These findings provide a nanoscale design principle for selective molecular sensing and broaden the use of TiO2-based nanomaterials in interfacial spectroscopy and related optoelectronic applications.
- 13 August 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (34) , 12006-12015
Postsynthetic Zn(II) Species Modification Regulates the Surface States of TiO2 Nanoparticles for Resonance-Assisted SERS
Engineering interfacial electronic states at the nanoscale is a powerful yet underdeveloped strategy for improving the selectivity of semiconductor-based molecular sensing. Here, we report a simple postsynthetic surface-associated Zn(II) species modification approach to engineer the surface states of TiO2 nanoparticles for resonance-assisted surface-enhanced Raman scattering (SERS). Structural and spectroscopic analyses indicate that Zn(II)-containing species are mainly associated with the TiO2 surface rather than incorporated into the lattice, allowing the nanoparticle framework and morphology to be preserved while modulating the near-surface electronic structure. This nanoscale surface-state engineering enriches defect-related states and narrows the effective band gap of TiO2, leading to improved energy-level matching with methylene blue (MB) under 532 nm excitation. As a result, the Zn-TiO2 substrate exhibits an enhanced Raman response relative to bare TiO2, with a maximum enhancement factor of 1.22 × 104 and acceptable reproducibility. More importantly, the selective amplification of specific MB vibrational bands indicates that the dominant contribution arises from a surface-state-mediated resonance-assisted charge-transfer process. Rather than relying on bulk doping, oxygen-vacancy engineering, or complex heterostructures, this work establishes surface metal-species association as a mild and structurally preserving route for tailoring semiconductor interfacial states. These findings provide a nanoscale design principle for selective molecular sensing and broaden the use of TiO2-based nanomaterials in interfacial spectroscopy and related optoelectronic applications.
- Open Access
- 25 July 2026
- Published by Elsevier in SSRN Electronic Journal
Fabrication and characterization of sodium alginate gel microspheres embedded with Luria-Bertani broth for sustained release in bacterial cultivation
It is difficult to predict the bacterial concentration at a specific time point in conventional bacterial culture. Researchers often need to adjust the concentration by diluting the culture after incubation, which makes the experiment time-consuming and increases the risk of cross-contamination. In this study, we developed sodium alginate gel microspheres encapsulating Luria-Bertani (LB) medium to create a sustained-release nutrient platform that enables the prediction of bacterial growth. The microspheres were prepared using a drop-casting and cross-linking method, and the preparation parameters were optimized through single-factor experiments. Systematic characterization revealed that the LB medium was successfully encapsulated within an “egg-box”-like cross-linked network, and the microspheres exhibited suitable sustained-release properties, with the release mechanism being synergistically controlled by diffusion and polymer chain relaxation. Application results indicate that this system stabilizes the optical density values of Escherichia coli and Staphylococcus aureus within the expected range at predetermined time points. Furthermore, the carrier itself does not inhibit bacterial growth, exhibits excellent biocompatibility, and provides growth curves with good temporal predictability, effectively avoiding the risk of cross-contamination associated with dilution procedures. This study offers a new standardized strategy for precision microbial culture.
- 25 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessFabrication and characterization of sodium alginate gel microspheres embedded with Luria-Bertani broth for sustained release in bacterial cultivation
It is difficult to predict the bacterial concentration at a specific time point in conventional bacterial culture. Researchers often need to adjust the concentration by diluting the culture after incubation, which makes the experiment time-consuming and increases the risk of cross-contamination. In this study, we developed sodium alginate gel microspheres encapsulating Luria-Bertani (LB) medium to create a sustained-release nutrient platform that enables the prediction of bacterial growth. The microspheres were prepared using a drop-casting and cross-linking method, and the preparation parameters were optimized through single-factor experiments. Systematic characterization revealed that the LB medium was successfully encapsulated within an “egg-box”-like cross-linked network, and the microspheres exhibited suitable sustained-release properties, with the release mechanism being synergistically controlled by diffusion and polymer chain relaxation. Application results indicate that this system stabilizes the optical density values of Escherichia coli and Staphylococcus aureus within the expected range at predetermined time points. Furthermore, the carrier itself does not inhibit bacterial growth, exhibits excellent biocompatibility, and provides growth curves with good temporal predictability, effectively avoiding the risk of cross-contamination associated with dilution procedures. This study offers a new standardized strategy for precision microbial culture.
- 7 April 2026
- Published by Royal Society of Chemistry (RSC) in The Analyst
- Vol. 151 (9) , 2468-2488
State-of-the-art of surface-enhanced Raman spectroscopy for pathogenic bacterial identification
SERS enables rapid, sensitive bacterial identification. This review highlights advances in substrates, sample enrichment and AI/ML spectral analysis, and outlines key challenges for standardised clinical translation.
- 7 April 2026
- Published by Royal Society of Chemistry (RSC) in The Analyst
- Vol. 151 (9) , 2468-2488
State-of-the-art of surface-enhanced Raman spectroscopy for pathogenic bacterial identification
SERS enables rapid, sensitive bacterial identification. This review highlights advances in substrates, sample enrichment and AI/ML spectral analysis, and outlines key challenges for standardised clinical translation.
- 27 March 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (14) , 7942-7953
Solvothermal Synthesis of Indium Tin Oxide (ITO) Nanoparticles: From Infrared Localized Surface Plasmon Resonance Absorption to Spontaneous Antibacterial Properties
A series of cubic-phase indium tin oxide (ITO) nanoparticles (NPs) with varying tin (Sn) doping ratios were synthesized via a solvothermal method. By precisely controlling the dopant concentration, the resulting ITO NPs of approximately 15 nm with excellent crystallinity achieved tunable infrared localized surface plasmon resonance (LSPR) absorption across the 1000–6000 nm wavelength range. For the first time, the antibacterial properties of ITO NPs under dark conditions were systematically investigated, revealing a strong correlation between their infrared LSPR absorption characteristics and antibacterial efficacy. Notably, ITO NPs with 5% Sn doping ratio exhibited the highest LSPR quality factor and the strongest antibacterial activity, producing an inhibition zone diameter 3.33 times larger than that of the control. In contrast, undoped, lightly doped, or excessively doped samples showed either diminished plasmonic quality factors, weak antibacterial activity, or a complete absence of antibacterial effects. This study represents the first demonstration of exploiting infrared LSPR-active ITO NPs for spontaneous antibacterial activity in darkness. The observed functionality is attributed to the NPs’ ability to absorb and convert ambient background radiation into localized energy. In summary, this work establishes ITO NPs as a novel class of inorganic antibacterial materials for dark environments with promising potential for coating and surface protection applications.
- 27 March 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (14) , 7942-7953
Solvothermal Synthesis of Indium Tin Oxide (ITO) Nanoparticles: From Infrared Localized Surface Plasmon Resonance Absorption to Spontaneous Antibacterial Properties
A series of cubic-phase indium tin oxide (ITO) nanoparticles (NPs) with varying tin (Sn) doping ratios were synthesized via a solvothermal method. By precisely controlling the dopant concentration, the resulting ITO NPs of approximately 15 nm with excellent crystallinity achieved tunable infrared localized surface plasmon resonance (LSPR) absorption across the 1000–6000 nm wavelength range. For the first time, the antibacterial properties of ITO NPs under dark conditions were systematically investigated, revealing a strong correlation between their infrared LSPR absorption characteristics and antibacterial efficacy. Notably, ITO NPs with 5% Sn doping ratio exhibited the highest LSPR quality factor and the strongest antibacterial activity, producing an inhibition zone diameter 3.33 times larger than that of the control. In contrast, undoped, lightly doped, or excessively doped samples showed either diminished plasmonic quality factors, weak antibacterial activity, or a complete absence of antibacterial effects. This study represents the first demonstration of exploiting infrared LSPR-active ITO NPs for spontaneous antibacterial activity in darkness. The observed functionality is attributed to the NPs’ ability to absorb and convert ambient background radiation into localized energy. In summary, this work establishes ITO NPs as a novel class of inorganic antibacterial materials for dark environments with promising potential for coating and surface protection applications.
- Open Access
- 2 March 2026
- Published by MDPI AG in Chemosensors
- Vol. 14 (3) , 56
A Ratiometric Fluorescence Sensor Based on BSA Assembled Gold–Silver Bimetallic Nanoclusters for Highly Selective Detection of Chlortetracycline in Water
This study reports the precise synthesis of red-emitting gold–silver bimetallic nanoclusters (Au-AgNCs) via a one-pot hydrothermal method using thiolactic acid as both the ligand and reducing agent. The Au-AgNCs possess an average diameter of 1.85 nm and exhibit strong fluorescence emission at 687 nm. Furthermore, they display notable assembly-induced emission enhancement (AIEE) properties. Upon assembly with bovine serum albumin (BSA), their fluorescence quantum yield significantly increases from 2.50% to 7.78%. Then Au-AgNCs@BSA assembly was employed as a ratiometric fluorescence sensor for the detection of chlortetracycline (CTC). In the presence of CTC, the original red emission of the assembly at 687 nm remained stable, while a new blue emission emerged at 420 nm and intensified progressively with CTC concentration. The ratio of the two emission intensities (I420/I687) exhibited an excellent linear correlation with CTC concentration over the range of 0.10 to 15 μM, with a limit of detection (LOD) of 20 nM. Notably, the sensor demonstrated exceptional selectivity for CTC, showing negligible response to common interfering substances such as metal ions, anions, amino acids, and crucially, other tetracycline antibiotics (tetracycline, oxytetracycline, and doxycycline). The practical applicability of the sensor was validated through the determination of spiked CTC in real water samples, achieving satisfactory recovery rates. In conclusion, this work accomplishes two key objectives: the development of novel AIEE-active Au-Ag bimetallic nanoclusters and the design of an efficient ratiometric sensing strategy. This approach enables the highly selective and sensitive detection of CTC, offering a promising tool for environmental monitoring.
- 2 March 2026
- Published by MDPI AG in Chemosensors
- Vol. 14 (3) , 56
Open AccessA Ratiometric Fluorescence Sensor Based on BSA Assembled Gold–Silver Bimetallic Nanoclusters for Highly Selective Detection of Chlortetracycline in Water
This study reports the precise synthesis of red-emitting gold–silver bimetallic nanoclusters (Au-AgNCs) via a one-pot hydrothermal method using thiolactic acid as both the ligand and reducing agent. The Au-AgNCs possess an average diameter of 1.85 nm and exhibit strong fluorescence emission at 687 nm. Furthermore, they display notable assembly-induced emission enhancement (AIEE) properties. Upon assembly with bovine serum albumin (BSA), their fluorescence quantum yield significantly increases from 2.50% to 7.78%. Then Au-AgNCs@BSA assembly was employed as a ratiometric fluorescence sensor for the detection of chlortetracycline (CTC). In the presence of CTC, the original red emission of the assembly at 687 nm remained stable, while a new blue emission emerged at 420 nm and intensified progressively with CTC concentration. The ratio of the two emission intensities (I420/I687) exhibited an excellent linear correlation with CTC concentration over the range of 0.10 to 15 μM, with a limit of detection (LOD) of 20 nM. Notably, the sensor demonstrated exceptional selectivity for CTC, showing negligible response to common interfering substances such as metal ions, anions, amino acids, and crucially, other tetracycline antibiotics (tetracycline, oxytetracycline, and doxycycline). The practical applicability of the sensor was validated through the determination of spiked CTC in real water samples, achieving satisfactory recovery rates. In conclusion, this work accomplishes two key objectives: the development of novel AIEE-active Au-Ag bimetallic nanoclusters and the design of an efficient ratiometric sensing strategy. This approach enables the highly selective and sensitive detection of CTC, offering a promising tool for environmental monitoring.
- 27 May 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (22) , 5488-5495
From Alcohol Ligand Content to Doping Level, Morphology, and Optical Absorption in the Synthesis Process of Aluminum-Doped Zinc Oxide Nanoparticles
Aluminum-doped zinc oxide (AZO) nanoparticles (NPs) with tunable composition, morphology, and localized surface plasmon resonance (LSPR) properties were synthesized via a high-temperature thermal injection method. While maintaining constant Zn and Al amounts, systematic alcohol-to-Zn ratio variations (2.5:1 to 10.0:1) enabled precise control over Al3+ doping levels, particle morphology, and optical characteristics. Increasing alcohol content enhanced Al3+ incorporation into the ZnO lattice while reducing particle size and blue-shifting LSPR absorption. The NPs exhibited strong NIR/MIR absorption (peaking at 2002 cm-1 within the 6000-580 cm-1 range), resulting from increased free carrier density through Al3+/Zn2+ heterovalent substitution. This work establishes a reliable approach for designing infrared plasmonic metal oxides, demonstrating how synthetic parameters govern dopant incorporation and optical responses. The tunable NIR/MIR properties of AZO NPs show significant potential for both fundamental research and practical applications in light-responsive technologies, pending further optimization of the synthesis process.
- 27 May 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (22) , 5488-5495
From Alcohol Ligand Content to Doping Level, Morphology, and Optical Absorption in the Synthesis Process of Aluminum-Doped Zinc Oxide Nanoparticles
Aluminum-doped zinc oxide (AZO) nanoparticles (NPs) with tunable composition, morphology, and localized surface plasmon resonance (LSPR) properties were synthesized via a high-temperature thermal injection method. While maintaining constant Zn and Al amounts, systematic alcohol-to-Zn ratio variations (2.5:1 to 10.0:1) enabled precise control over Al3+ doping levels, particle morphology, and optical characteristics. Increasing alcohol content enhanced Al3+ incorporation into the ZnO lattice while reducing particle size and blue-shifting LSPR absorption. The NPs exhibited strong NIR/MIR absorption (peaking at 2002 cm-1 within the 6000-580 cm-1 range), resulting from increased free carrier density through Al3+/Zn2+ heterovalent substitution. This work establishes a reliable approach for designing infrared plasmonic metal oxides, demonstrating how synthetic parameters govern dopant incorporation and optical responses. The tunable NIR/MIR properties of AZO NPs show significant potential for both fundamental research and practical applications in light-responsive technologies, pending further optimization of the synthesis process.
- 20 May 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 315 (Pt 2) , 144443
Preparation, optimizations, and applications of (carboxymethyl cellulose)-chitosan polyelectrolyte composite films in food packaging: a review
- 20 May 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 315 (Pt 2) , 144443
Preparation, optimizations, and applications of (carboxymethyl cellulose)-chitosan polyelectrolyte composite films in food packaging: a review
- 20 March 2025
- Published by Elsevier in Chemical Engineering Journal
- Vol. 510
Optimization strategies for carbon dioxide electroreduction to ethylene
- 20 March 2025
- Published by Elsevier in Chemical Engineering Journal
- Vol. 510
Optimization strategies for carbon dioxide electroreduction to ethylene
- 19 March 2025
- Published by Springer Nature in Journal of Food Measurement and Characterization
- Vol. 19 (5) , 3403-3417
Preparation and characterization of sodium alginate/starch/wormwood extract composite film and its application in cherry preservation
- 19 March 2025
- Published by Springer Nature in Journal of Food Measurement and Characterization
- Vol. 19 (5) , 3403-3417
Preparation and characterization of sodium alginate/starch/wormwood extract composite film and its application in cherry preservation