Tomas Mikulasek
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tomas Mikulasek has a total of 77 co-authors. Here are the top co-authors by number of shared publications:
- Ales Prokes
Brno University of Technology
33 shared publications - Jiri Blumenstein
Brno University of Technology
25 shared publications - Aniruddha Chandra
National Institute of Technology
21 shared publications Josef Vychodil
Brno University of Technology
14 shared publicationsThomas Zemen
Safety and Security Department, Austrian Institute of Technology, Austria
11 shared publications- Jan Marcin Kelner
Military University of Technology
8 shared publications
Latest Publications
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (9) , 3821-3825
Measurement and Characterization of Dual-Band Vehicle-to-Vehicle Millimeter-Wave Propagation Channels at 60 GHz and 80 GHz
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (9) , 3821-3825
Measurement and Characterization of Dual-Band Vehicle-to-Vehicle Millimeter-Wave Propagation Channels at 60 GHz and 80 GHz
- Open Access
- 1 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 84435-84452
Directional Path Loss Prediction Based on Omnidirectional Model for Multipath Environment
The implementation of the effective and dynamic beamforming of the antenna system in fifth-generation and beyond networks requires the development of fast methods for assessing the power balance of wireless links operating in multipath propagation environments. In this paper, we propose a novel method that is based on known propagation models used for omnidirectional antennas. Numerical calculations using the geometric structure of a multi-ellipsoidal propagation model are the basis for transforming an omnidirectional path loss (PL) model into a directional PL one. The parameters of this structure are determined based on a power delay profile that is closely related to the properties of the propagation environment. The correctness of the developed method was verified by measurement data commonly available in the literature. The verification showed that the mean absolute errors determined for PL exponents and all analyzed scenarios are equal to 0.19 and 0.11 for line-of-sight (LOS) and non-LOS conditions, respectively. The possibility of assessing the impact of environmental diversity, propagation conditions, parameters, and patterns of antenna systems on PL shows the universal nature of the developed method.
- 1 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 84435-84452
Open AccessDirectional Path Loss Prediction Based on Omnidirectional Model for Multipath Environment
The implementation of the effective and dynamic beamforming of the antenna system in fifth-generation and beyond networks requires the development of fast methods for assessing the power balance of wireless links operating in multipath propagation environments. In this paper, we propose a novel method that is based on known propagation models used for omnidirectional antennas. Numerical calculations using the geometric structure of a multi-ellipsoidal propagation model are the basis for transforming an omnidirectional path loss (PL) model into a directional PL one. The parameters of this structure are determined based on a power delay profile that is closely related to the properties of the propagation environment. The correctness of the developed method was verified by measurement data commonly available in the literature. The verification showed that the mean absolute errors determined for PL exponents and all analyzed scenarios are equal to 0.19 and 0.11 for line-of-sight (LOS) and non-LOS conditions, respectively. The possibility of assessing the impact of environmental diversity, propagation conditions, parameters, and patterns of antenna systems on PL shows the universal nature of the developed method.
- 19 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (10) , 3669-3673
Stochastic 3-D Foliage Modeling at 80 GHz: Experimental Validation and Ray-Tracing Simulations
A stochastic modeling methodology for 3D foliage is presented, aimed at enhancing ray-tracing simulations. The model supports adjustable stochastic geometry, density, and shape to capture variability in foliage structures. The model is validated through experimental measurements of representative vegetation. The influence of foliage density and size on path loss and RMS delay spread is analyzed to demonstrate the applicability of the model in the 80 GHz frequency band.
- 19 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (10) , 3669-3673
Stochastic 3-D Foliage Modeling at 80 GHz: Experimental Validation and Ray-Tracing Simulations
A stochastic modeling methodology for 3D foliage is presented, aimed at enhancing ray-tracing simulations. The model supports adjustable stochastic geometry, density, and shape to capture variability in foliage structures. The model is validated through experimental measurements of representative vegetation. The influence of foliage density and size on path loss and RMS delay spread is analyzed to demonstrate the applicability of the model in the 80 GHz frequency band.
- Open Access
- 2 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 144738-144749
Characterizing the 80 GHz Channel in Static Scenarios: Diffuse Reflection, Scattering, and Transmission Through Trees Under Varying Weather Conditions
The deployment of wireless systems in millimeter wave relies on a thorough understanding of electromagnetic wave propagation under various weather conditions and scenarios. In this study, we characterize millimeter wave propagation effects from measurement data, utilizing channel impulse response analysis with a focus on root mean square delay spread and Rician K -factor. The obtained results highlight the significant influence of weather conditions and foliage on propagation, including diffuse reflection, scattering, and absorption. Particularly, we observed a notable increase in scattering from deciduous trees with leaves, in comparison with bare trees or ones covered by snow or ice. The attenuation of the signal propagated through a tree with foliage is 2.16 dB/m higher compared to a bare tree. Our validation measurements within a semi-anechoic chamber confirmed these observations and aided in quantifying the differences. These findings offer valuable insights into the dynamics of millimeter-wave signals that are important for advancing wireless communication technologies.
- 2 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 144738-144749
Open AccessCharacterizing the 80 GHz Channel in Static Scenarios: Diffuse Reflection, Scattering, and Transmission Through Trees Under Varying Weather Conditions
The deployment of wireless systems in millimeter wave relies on a thorough understanding of electromagnetic wave propagation under various weather conditions and scenarios. In this study, we characterize millimeter wave propagation effects from measurement data, utilizing channel impulse response analysis with a focus on root mean square delay spread and Rician K -factor. The obtained results highlight the significant influence of weather conditions and foliage on propagation, including diffuse reflection, scattering, and absorption. Particularly, we observed a notable increase in scattering from deciduous trees with leaves, in comparison with bare trees or ones covered by snow or ice. The attenuation of the signal propagated through a tree with foliage is 2.16 dB/m higher compared to a bare tree. Our validation measurements within a semi-anechoic chamber confirmed these observations and aided in quantifying the differences. These findings offer valuable insights into the dynamics of millimeter-wave signals that are important for advancing wireless communication technologies.
- 13 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (5) , 1653-1657
Channel Modeling for 60 GHz Fixed mmWave O2I and O2O Uplink with Angular Misalignment
In this letter, we examine the effect of misalignment angle on cluster-based power delay profile (PDP) modeling for a 60 GHz millimeter-wave uplink. The analysis uses real-world data, where fixed uplink scenarios are realized by placing the transmitter at ground level and the receiver at the building level. Both outdoor-to-indoor (O2I) and outdoor-to-outdoor (O2O) scenarios are studied. Using the misalignment angle and the scenario as inputs, we propose a statistical PDP simulation algorithm based on the Saleh–Valenzuela model. Different goodness-of-fit metrics reveal that our proposed algorithm is robust to both O2I and O2O scenarios and can approximate the PDPs fairly well, even in case of misalignment.
- 13 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (5) , 1653-1657
Channel Modeling for 60 GHz Fixed mmWave O2I and O2O Uplink with Angular Misalignment
In this letter, we examine the effect of misalignment angle on cluster-based power delay profile (PDP) modeling for a 60 GHz millimeter-wave uplink. The analysis uses real-world data, where fixed uplink scenarios are realized by placing the transmitter at ground level and the receiver at the building level. Both outdoor-to-indoor (O2I) and outdoor-to-outdoor (O2O) scenarios are studied. Using the misalignment angle and the scenario as inputs, we propose a statistical PDP simulation algorithm based on the Saleh–Valenzuela model. Different goodness-of-fit metrics reveal that our proposed algorithm is robust to both O2I and O2O scenarios and can approximate the PDPs fairly well, even in case of misalignment.
- 15 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 260-265
Comparative Analysis of Clustering Methods for Power Delay Profile in MMW Bands and In-Vehicle Scenarios
The spatial statistics of radio wave propagation in specific environments and scenarios, as well as being able to recognize important signal components, are prerequisites for dependable connectivity. There are several reasons why in-vehicle communication is unique, including safety considerations and vehicle-to-vehicle/infrastructure communication.The paper examines the characteristics of clustering power delay profiles to investigate in-vehicle communication. It has been demonstrated that the Saleh-Valenzuela channel model can also be adapted for in-vehicle communication, and that the signal is received in clusters with exponential decay. A measurement campaign was conducted, capturing the power delay profile inside the vehicle cabin, and the reweighted ℓ 1 minimization method was compared with the traditional k-means clustering techniques.
- 15 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 260-265
Comparative Analysis of Clustering Methods for Power Delay Profile in MMW Bands and In-Vehicle Scenarios
The spatial statistics of radio wave propagation in specific environments and scenarios, as well as being able to recognize important signal components, are prerequisites for dependable connectivity. There are several reasons why in-vehicle communication is unique, including safety considerations and vehicle-to-vehicle/infrastructure communication.The paper examines the characteristics of clustering power delay profiles to investigate in-vehicle communication. It has been demonstrated that the Saleh-Valenzuela channel model can also be adapted for in-vehicle communication, and that the signal is received in clusters with exponential decay. A measurement campaign was conducted, capturing the power delay profile inside the vehicle cabin, and the reweighted ℓ 1 minimization method was compared with the traditional k-means clustering techniques.
- 19 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (9) , 2125-2129
Vehicle-to-Vehicle Path Loss Modeling at Millimeter-Wave Band for Crossing Cars
Fifth generation new radio (5 G NR) is now offering sidelink capability, which allows direct vehicle-to-vehicle (V2V) communication. Millimeter wave (mmWave) enables low-latency mission-critical V2V communications, such as forward crash warning, between two vehicles crossing on a road without dividers. In this article, we present a measurement-based path loss (PL) model for V2V links operating at 59.6 GHz mmWave when two vehicles approach from opposite sides and cross each other. Our model outperforms other existing PL models and can reliably model both approaching and departing vehicle scenarios.
- 19 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (9) , 2125-2129
Vehicle-to-Vehicle Path Loss Modeling at Millimeter-Wave Band for Crossing Cars
Fifth generation new radio (5 G NR) is now offering sidelink capability, which allows direct vehicle-to-vehicle (V2V) communication. Millimeter wave (mmWave) enables low-latency mission-critical V2V communications, such as forward crash warning, between two vehicles crossing on a road without dividers. In this article, we present a measurement-based path loss (PL) model for V2V links operating at 59.6 GHz mmWave when two vehicles approach from opposite sides and cross each other. Our model outperforms other existing PL models and can reliably model both approaching and departing vehicle scenarios.
- 13 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 899-904
Angular Power Distribution in 60 GHz Wireless Uplink for Vehicle-to-Infrastructure Scenarios
In emerging fifth-generation (5G) networks, millimeter-wave bands will be used. Due to high atmospheric attenuation, the 60 GHz band is planned to be used for indoor and outdoor line-of-sight communication. Numerous uses of this band for vehicle-to-infrastructure (V2I) connectivity are indicated in the literature. In this paper, we propose a novel method for determining angle-of-arrival power distribution in wireless uplink. In this method, the three-dimensional geometry-based stochastic channel model is used for generating propagation paths. A multi-ellipsoid geometry of this model is based on the synthesized power delay profile obtained in the measurement campaign for the analyzed V2I scenario. Finally, we describe the future directions of mapping environmental influence on the angular power distribution.
- 13 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 899-904
Angular Power Distribution in 60 GHz Wireless Uplink for Vehicle-to-Infrastructure Scenarios
In emerging fifth-generation (5G) networks, millimeter-wave bands will be used. Due to high atmospheric attenuation, the 60 GHz band is planned to be used for indoor and outdoor line-of-sight communication. Numerous uses of this band for vehicle-to-infrastructure (V2I) connectivity are indicated in the literature. In this paper, we propose a novel method for determining angle-of-arrival power distribution in wireless uplink. In this method, the three-dimensional geometry-based stochastic channel model is used for generating propagation paths. A multi-ellipsoid geometry of this model is based on the synthesized power delay profile obtained in the measurement campaign for the analyzed V2I scenario. Finally, we describe the future directions of mapping environmental influence on the angular power distribution.
- 26 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (1) , 250-259
5G SIW-Based Phased Antenna Array With Cosecant-Squared Shaped Pattern
In this article, a concept of a phased antenna array based on substrate integrated waveguide (SIW) technology for 5G base stations is proposed. The array has a cosecant radiation pattern in the vertical plane for uniform illumination in a sector area. The array itself consists of 16 SIW traveling wave subarrays of 12 slot-coupled microstrip patch antennas associated with a pair of reflection-canceling vias and phasing elements to get the tapered distribution both in amplitude and phase for the cosecant-shaped radiation pattern. The array is designed to be operational at 28 GHz with a bandwidth of more than 10%, a candidate mm-wave frequency band for 5G. The phased antenna array supports wide-angle scanning of +/−60° in azimuth and exhibits good active impedance properties. The array design is successfully verified experimentally.
- 26 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (1) , 250-259
5G SIW-Based Phased Antenna Array With Cosecant-Squared Shaped Pattern
In this article, a concept of a phased antenna array based on substrate integrated waveguide (SIW) technology for 5G base stations is proposed. The array has a cosecant radiation pattern in the vertical plane for uniform illumination in a sector area. The array itself consists of 16 SIW traveling wave subarrays of 12 slot-coupled microstrip patch antennas associated with a pair of reflection-canceling vias and phasing elements to get the tapered distribution both in amplitude and phase for the cosecant-shaped radiation pattern. The array is designed to be operational at 28 GHz with a bandwidth of more than 10%, a candidate mm-wave frequency band for 5G. The phased antenna array supports wide-angle scanning of +/−60° in azimuth and exhibits good active impedance properties. The array design is successfully verified experimentally.
- 1 December 2020
- Published by Elsevier in Vehicular Communications
- Vol. 26
Time-variance of 60 GHz vehicular infrastructure-to-infrastructure (I2I) channel
- 1 December 2020
- Published by Elsevier in Vehicular Communications
- Vol. 26
Time-variance of 60 GHz vehicular infrastructure-to-infrastructure (I2I) channel