HLHao Li

Hao Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hao Li has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Achieving Ultra-Wide Band Operation of the High-Power Sheet Beam TWT by Using Novel Double-Ridge Staggered Vane Structure

    by Zihao Dai, Jianxun Wang, Yixin Wan, Xinjie Li, Jingzhi Zheng, Yuan Fang, Hao Li, Yong Luo

    To break limitation in the bandwidth of traditional SB-TWTs at high power of its operation, an innovative Double-Ridge Staggered Vane (DRSV) Structure is proposed and verified as an effective solution for ultra-wideband high-power TWT in the millimeter wave and terahertz. DRSV is based on the staggered double-vane slow-wave structure (SDV-SWS) and introduces side slots on both sides, which changes the circuit characteristics. This novel SWS allows for a significant expansion in operating bandwidth while maintaining high power output. In addition, combined with an all-period phase velocity tapering optimization method, the bandwidth and efficiency can be further improved.The ultra-wideband amplification characteristics were verified using particle in-cell (PIC) simulations at Ka-band. Additionally, experimental validation was performed on the dispersion properties. The results demonstrate that the 3-dB bandwidth surpasses 13.5 GHz, ranging from 20 to 33.5 GHz, corresponding to a relative bandwidth of 50.5%.


  • Ultra-Wideband Flattened Design Enabling the Development of Sheet Beam Traveling Wave Tubes in the SHF Band

    by Yixin Wan, Jianxun Wang, Xinjie Li, Zihao Dai, Qiang Zheng, Hao Li, Wei Jiang, Yong Luo

    Considerable progress has been made in the development of sheet beam traveling-wave tubes (SB-TWTs) that operate in the millimeter-wave and terahertz domains. However, research pertaining to SB-TWTs operating in the super high frequency (SHF) band is notably lacking. In this article, the potential for the future advancement of SB-TWTs into the SHF band is investigated. To address the technical challenges of sideband oscillation and excessive size, an ultra-wideband flattened design has been proposed and verified. The proposed flattened design employs a flat electric field with 84.6% space occupation that has been shown to efficiently interact with the sheet beam while providing high phase consistency for electron modulation, thereby enhancing the concentration of the energy distribution of the sheet beam and improving overall efficiency. The adoption of sideband mode disturbance technology inherently eliminates upper sideband oscillation, releases the bandwidth limitation, and enables high power output. The analysis reveals that the 3-dB relative bandwidth reaches 41.2%, and the power bandwidth product exceeds 100 kW-GHz in $\textit{X}$ -band. Moreover, the proposed design reduces the height of the vanes by 26.5% compared to traditional structures, which facilitates the possibility of compact periodic cusp magnet (PCM) focusing systems in the SHF band. Overall, these findings suggest that the proposed ultra-wideband flattened design offers a promising solution for the development of high-performance compact SB-TWTs that operate across a broad frequency range, including the SHF band.


  • Investigation on Out-of-Tube Reflection Oscillations and Suppression Technology for Wideband Sheet Beam TWTs

    by Zihao Dai, Jianxun Wang, Yixin Wan, Xinjie Li, Hao Li, Zewei Wu, Yong Luo

    In this study, an analysis of the out-of-tube reflection oscillation of wideband sheet beam traveling wave tubes (SB-TWTs) is presented and an absorptive low-pass filter (ALPF) for oscillation suppression is proposed. The oscillation condition of the TWT is employed to investigate the effect of external devices on the stability of the system. The analysis reveals that high external reflection can trigger the out-of-tube reflection oscillation. A filter-loaded structure is proposed to suppress the oscillations, which employs multistep auxiliary dissipative waveguides and weak coupling technique to achieve low reflection in the operational frequency range and high insertion loss in the stopband. Two proof-of-concept prototypes are fabricated and tested. An appropriate error model is formulated to identify the source of the error, which helps improve the processing methods. The improved ALPF is tested and exhibits excellent agreement with the simulation results. The reflection coefficient from 26.5 to 40 GHz is less than $-$ 20 dB, while the average insertion loss is less than 0.8 dB in the passband (from 26 to 32 GHz) and surpasses 10 dB in the stopband (from 35 to 38 GHz). These results demonstrate the efficacy of the proposed filter-loaded technique, which suppresses out-of-tube reflection oscillations in wideband SB-TWTs.


  • Theoretical Optimization and Validation of a Wideband Gyro-TWT With Curved-Profile Circuit

    by Yelei Yao, Xinge Dai, Guo Liu, Ran Yan, Hao Li, Wei Jiang, Jianxun Wang, Youlei Pu, Yong Luo

    The large-signal theory for curved-profile circuit and magnetic field of gyro-TWT is presented. According to it, an optimization method is proposed to achieve effective wave-particle interaction over a wide frequency band through a curved-profile circuit with cutoff sections and gyrotron solenoid magnetic field. It avoids strict limit of grazing magnetic field along the circuit position to improve the design freedom. On this basis, a Ka -band gyro-TWT operating at TE01 mode is theoretically designed and well validated by particle-in-cell (PIC) codes and hot-test experiments. The developed amplifier achieves an output power of above 134 kW range from 27.7 to 31.7 GHz, with an interaction efficiency of above 22.3% over the entire band.


  • Performance and Experimental Progress of a Compact W-band High Average Power Sheet Beam Extended Interaction Oscillator

    by Jianxun Wang, Yixin Wan, Daqing Xu, Xinjie Li, Zihao Dai, Hao Li, Wei Jiang, Zewei Wu, Guo Liu, Yelei Yao, et al.

    In response to the urgent requirement for a high-power millimeter-wave system with small size, low cost, and excellent maneuverability in W-band, a compact high average power sheet beam extended interaction oscillator (SB-EIO) based on periodic cusp magnet (PCM) is designed, fabricated, hot tested and reliability verified. The maximum output power is 10.2 kW at a working duty of 1%. When the duty is increased to 27%, an average power of 2.2 kW is achieved, corresponding to a $400 \mu \text{s}$ pulse and 675 Hz repetition frequency. The device can be repeatedly turned on and off quickly during a 6-minute operating time and the single longest running time exceeds 60 min. The 96.0% transmission rate of the sheet beam (45.5 kV, 2.49 A) is verified. The overall weight of SB-EIO including the magnet and external package is less than 10 kg, which is ideal for equipping movable platforms.


  • Theoretical and Experimental Study of Gyro-TWT Solenoids With Displacement and Tilt

    by Bo Guan, Yelei Yao, Wei Jiang, Guo Liu, Hao Li, Jianxun Wang, Yong Luo

    Axis coincidence consideration is necessary in the design of gyrotron solenoids; besides, radial field component strongly affects the performance of gyrodevices owing to the transverse particle–wave interaction mechanism in it, especially for high-frequency operation. In this article, the theory of multiple eccentric coils is derived. It is capable of calculating the off-axis field inside the solenoid with specified displacement and tilt. Numerical calculations are validated by 3-D electromagnetic simulation methods. Based on the measured magnet field, the displacement and tilt of a three-coil magnet system are successfully predicted with a global optimization algorithm, and then, the magnet system is well calibrated using a pair of flanges.


  • Investigation of High Interaction Efficiency of Sheet Beam TWT Based on All-Period Optimization and Beam Bunching Analysis

    by Qiang Liu, Jianxun Wang, Zeng Liu, Yixin Wan, Xinjie Li, Kaixuan Fu, Hao Li, Yong Luo

    This article explores an extremely high beam–wave interaction (BWI) efficiency technology of sheet beam traveling wave tubes (SBTWTs). An all-period phase velocity tapering optimization method is proposed to improve BWI efficiency of slow wave structure (SWS). The effects of the special electron bunching state and synchronous phase velocity change on the improvement of BWI efficiency generated by this method are analyzed. To solve the computational burden caused by dozens of parameters, self-developed 1-D nonlinear BWI code is used to calculate the BWI. For the best optimization effect, particle swarm optimization (PSO) algorithm selected from a variety of algorithms is utilized to search for the global optimal solution. The PIC simulation verification results show that by the all-period optimization method, the 80-period staggered double vane (SDV) SWS achieves a stable output power of 18 kW with 31 kV voltage 0.9-A current sheet beam at 30 GHz. The BWI efficiency of all-period phase velocity tapering SWS has reached 64.5% at center frequency, the efficiency between 28 and 35 GHz exceeds 40%.


  • Continuous Wave Operation of a Ka-Band Broadband High-Power Sheet Beam Traveling-Wave Tube

    by Jianxun Wang, Yixin Wan, Xinjie Li, Qiang Liu, Hao Li, Yelei Yao, Qiang Zheng, Zewei Wu, Wei Jiang, Guo Liu, et al.

    To meet the need to transmit increasingly massive volumes of data, a more than 3 kW continuous wave (CW) Ka-band sheet beam traveling-wave tube (SB-TWT) is reported for the first time. Working under unsaturated drive, the maximum gain obtained is 29 dB with a sheet beam of 30.9 kV, 0.82 A, and the efficiency exceeds 24% with a single-stage collector depressed to −15 kV. The 1-dB bandwidth reaches 6 GHz from 26 GHz to 32 GHz and the bandwidth with output power greater than 2 kW can even reach 7GHz from 26 GHz to 33 GHz. The realization of 99.8% static transmission as well as over 97% actual CW transmission of sheet beam is verified successfully, which benefits from adopting periodic cusp magnet (PCM) focusing, and thereby total weight is less than 15 kg. The relevant experimental details are introduced in this letter.


  • Analysis of Oscillations in Confocal Gyrotron Travelling-Wave Amplifiers

    by Yelei Yao, Jianxun Wang, Ran Yan, Hao Li, Yong Luo, Shaowei Liao

    In this article, key parameters that characterize field distribution and beam-wave coupling in confocal circuits are studied. The kinetic theory of confocal gyro-TWT considering launching loss is deduced based on it, which is capable of predicting the linear gain rate of confocal circuits with arbitrary mirror widths. Numerical results manifest that the output power/gain versus interaction position agrees well with the nonlinear results in the small-signal regime. In addition, main oscillations in confocal circuits including the near-cutoff oscillation and backward-wave oscillation (BWO) have been examined. Analytical expressions that can predict the near-cutoff oscillation threshold of uniform circuits without considering loss are derived and kz-f plots are introduced for lossy circuits. Furthermore, an algorithm that can automatically search the BWO start-oscillation thresholds of confocal circuits with arbitrary mirror widths has been developed.


  • Development of High-Efficiency Gyro-TWT With a Nonuniform Dielectric-Loaded Circuit

    by Hao Li, Jianxun Wang, Yelei Yao, Yong Luo

    This paper presents the development of highly efficient gyrotron traveling-wave tube (gyro-TWT) with a nonuniform dielectric-loaded interaction circuit. The high-quality electron beam has been generated by curved-profile magnetron injection gun (MIG). With regard to the profile optimization, simulated annealing algorithm (SAA) and genetic algorithm (GA) are applied. An electron beam with a pitch factor of 1.6 and low-axial velocity spread of 0.9182% have been obtained. The parametric sensitivity is discussed in detail. A nonuniform dielectric-loaded circuit has been employed to suppress both global oscillations and local oscillations. Different thicknesses of dielectric materials have been manufactured and measured, demonstrating the circuit loss of oscillation modes that are enough for stable operation. The interaction circuit is analyzed under the guidance of nonlinear self-consistent theory and particle-in-cell (PIC) codes. The tube achieves a saturated peak output power of 36.24 kW at 93 GHz, corresponding to a saturated gain of 54 dB and a maximum efficiency of 45.3% within a 3-dB saturated bandwidth of 5 GHz.