Gopalakrishnan Govindasamy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gopalakrishnan Govindasamy has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Rohit Sharma
Department of Biotechnology Engineering and Food Technology, University Institute of Engineering, Chandigarh University, Chandigarh-140413, India
3 shared publications - Arumugam Pandurangan
Department Of Chemistry, Anna University, Chennai, India
2 shared publications - Pulla Rose Havilah
Department of Chemical Engineering, Energy Cluster, School of Advanced Engineering, UPES, Dehradun, India
2 shared publications Sunu Subramanian
Department of Chemical Engineering, School of Engineering, University of Petroleum & Energy Studies (UPES), Dehradun, India
2 shared publications- Alok Patel
Luleå University of Technology
1 shared publication - Amit Kumar Sharma
Princeton University
1 shared publication
Latest Publications
- 24 April 2025
- Published by Springer Nature in Journal of Material Cycles and Waste Management
- Vol. 27 (4) , 2016-2031
Configuring municipal solid and liquid waste treatment plants into bio-refinery to achieve sustainable development goals
- 24 April 2025
- Published by Springer Nature in Journal of Material Cycles and Waste Management
- Vol. 27 (4) , 2016-2031
Configuring municipal solid and liquid waste treatment plants into bio-refinery to achieve sustainable development goals
- 17 March 2025
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (16) , 22941-22957
Utilization of Lantana Camara, an invasive and hepatotoxic plant: a kinetic, thermodynamic and experimental studies on its gasification to hydrogen rich producer gas
- 17 March 2025
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (16) , 22941-22957
Utilization of Lantana Camara, an invasive and hepatotoxic plant: a kinetic, thermodynamic and experimental studies on its gasification to hydrogen rich producer gas
- Open Access
- 7 November 2022
- Published by BCREC Publishing Group in Bulletin of Chemical Reaction Engineering & Catalysis
- Vol. 17 (4) , 768-777
Catalytic Hydrothermal Liquefaction of Sugarcane Bagasse: Effect of Crystallization Time of Fe-MCM-41 and Process Parameters
Sugarcane is both food and energy crop providing sugar and energy products. Hydrothermal liquefaction (HTL) is gaining importance for the conversion of sugarcane bagasse to bio-oil, whose yield depends on the deoxygenation activity of the catalyst employed and process parameters. In this study, mesoporous Fe-MCM-41 catalysts were synthesized with crystallization time varied from 12 to 72 h, characterized by X-ray Diffraction (XRD), textural analysis, Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDX), and evaluated for the HTL of sugarcane bagasse. All the Fe-MCM-41 catalysts gave higher bio-oil yield with lower oxygen content compared to non-catalytic HTL, confirmed their deoxygenation activity. Among them, Fe-MCM-41 synthesized after 24 h of crystallization was found to have the highest crystallinity, and surface area thus gave the highest bio-oil yield of 56.2% containing the least amount of oxygen of 15.3 wt% at 250 °C, initial CO pressure of 45 bar, reaction time of 120 min, Water/Biomass weight ratio of 28, Catalyst/Biomass weight ratio of 0.4 and 0.2, respectively. Overall process of HTL of sugarcane bagasse was found to involve two consecutive equilibria, first conversion of lignocellulose of sugarcane bagasse by hydrolysis to water soluble organics (WSO) followed by its deoxygenation to bio-oil. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
- 7 November 2022
- Published by BCREC Publishing Group in Bulletin of Chemical Reaction Engineering & Catalysis
- Vol. 17 (4) , 768-777
Open AccessCatalytic Hydrothermal Liquefaction of Sugarcane Bagasse: Effect of Crystallization Time of Fe-MCM-41 and Process Parameters
Sugarcane is both food and energy crop providing sugar and energy products. Hydrothermal liquefaction (HTL) is gaining importance for the conversion of sugarcane bagasse to bio-oil, whose yield depends on the deoxygenation activity of the catalyst employed and process parameters. In this study, mesoporous Fe-MCM-41 catalysts were synthesized with crystallization time varied from 12 to 72 h, characterized by X-ray Diffraction (XRD), textural analysis, Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDX), and evaluated for the HTL of sugarcane bagasse. All the Fe-MCM-41 catalysts gave higher bio-oil yield with lower oxygen content compared to non-catalytic HTL, confirmed their deoxygenation activity. Among them, Fe-MCM-41 synthesized after 24 h of crystallization was found to have the highest crystallinity, and surface area thus gave the highest bio-oil yield of 56.2% containing the least amount of oxygen of 15.3 wt% at 250 °C, initial CO pressure of 45 bar, reaction time of 120 min, Water/Biomass weight ratio of 28, Catalyst/Biomass weight ratio of 0.4 and 0.2, respectively. Overall process of HTL of sugarcane bagasse was found to involve two consecutive equilibria, first conversion of lignocellulose of sugarcane bagasse by hydrolysis to water soluble organics (WSO) followed by its deoxygenation to bio-oil. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
- 1 November 2022
- Published by Springer Nature in Journal of Porous Materials
- Vol. 30 (2) , 639-653
SBA-15 and carbon supported nickel, heteropoly acid catalysts for the hydrodeoxygenation of lignin derived trans-anethole to sustainable aviation fuel
- 1 November 2022
- Published by Springer Nature in Journal of Porous Materials
- Vol. 30 (2) , 639-653
SBA-15 and carbon supported nickel, heteropoly acid catalysts for the hydrodeoxygenation of lignin derived trans-anethole to sustainable aviation fuel
- Open Access
Biomass Gasification in Downdraft Gasifiers: A Technical Review on Production, Up-Gradation and Application of Synthesis Gas
Rapid climate change and forecasted damage from fossil fuel combustion, forced researchers to investigate renewable and clean energy sources for the sustainable development of societies throughout the world. Biomass-based energy is one of the most important renewable energy sources for meeting daily energy needs, which are gaining in popularity daily. Gasification-based bioenergy production is an effective way to replace fossil fuels and reduce CO2 emissions. Even though biomass gasification has been studied extensively, there is still much opportunity for improvement in terms of high-quality syngas generation (high H2/CO ratio) and reduced tar formation. Furthermore, the presence of tar has a considerable impact on syngas quality. Downdraft gasifiers have recently shown a significant potential for producing high-quality syngas with lower tar concentrations. This article presents a comprehensive review on the advancement in biomass downdraft gasification technologies for high-quality synthesis gas. In addition, factors affecting syngas production and composition e.g., equivalency ratio, temperature, particle size, and gasification medium on synthesis gas generation are also comprehensively studied. The up-gradation and various applications of synthesis gas are also discussed in brief in this review article.
Open AccessBiomass Gasification in Downdraft Gasifiers: A Technical Review on Production, Up-Gradation and Application of Synthesis Gas
Rapid climate change and forecasted damage from fossil fuel combustion, forced researchers to investigate renewable and clean energy sources for the sustainable development of societies throughout the world. Biomass-based energy is one of the most important renewable energy sources for meeting daily energy needs, which are gaining in popularity daily. Gasification-based bioenergy production is an effective way to replace fossil fuels and reduce CO2 emissions. Even though biomass gasification has been studied extensively, there is still much opportunity for improvement in terms of high-quality syngas generation (high H2/CO ratio) and reduced tar formation. Furthermore, the presence of tar has a considerable impact on syngas quality. Downdraft gasifiers have recently shown a significant potential for producing high-quality syngas with lower tar concentrations. This article presents a comprehensive review on the advancement in biomass downdraft gasification technologies for high-quality synthesis gas. In addition, factors affecting syngas production and composition e.g., equivalency ratio, temperature, particle size, and gasification medium on synthesis gas generation are also comprehensively studied. The up-gradation and various applications of synthesis gas are also discussed in brief in this review article.
- Open Access
- 31 December 2019
- Published by BCREC Publishing Group in Bulletin of Chemical Reaction Engineering & Catalysis
- Vol. 15 (1) , 186-198
Effect of Composition of Iron-Cobalt Oxide Catalyst and Process Parameters on The Hydrothermal Liquefaction of Sugarcane Bagasse
Development of catalyst with high deoxygenation activity and optimum process parameters are the key for getting the highest biooil yield with the least oxygen content by hydrothermal liquefaction. With this view, iron-cobalt oxides of Co/Fe ratio 0.33, 1.09, 2.35, and 3.52 were prepared by co-precipitation method, and characterized by XRD, BET surface area, chemical composition by EDX method, and evaluated for hydrothermal liquefaction of sugarcane bagasse in a high-pressure batch reactor under subcritical conditions using CO as process gas to find the optimum Co/Fe ratio and process parameters. Optimum Co/Fe ratio was found to be 1.09 as it gave the highest bio-oil yield of 57.6% with the least oxygen content of 10.8%, attributed to the cobalt ferrite, the major phase present in it. The optimum temperature, initial CO pressure, water/biomass ratio, catalyst/biomass ratio and reaction time for the highest oil yield with the least oxygen content were found to be 250 °C, 45 bar, 28, 0.4, and 120 min, respectively. From the effect of reaction time, it was found that much of the hydrolysis of lignocellulose to water soluble oxygenates, its deoxygenation to bio-oil and its deoxygenation to low oxygen containing bio-oil took place in initial 15 min, 15 to 60 min, and from 30 to 120 min, respectively. Total oil yield (%) was lower by 21% and % oxygen in total oil was higher by 9.9% for spent catalyst compared to fresh catalyst indicating the erosion in the deoxygenation activity of catalyst and thus need for improving its hydrothermal stability. Copyright © 2020 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
- 31 December 2019
- Published by BCREC Publishing Group in Bulletin of Chemical Reaction Engineering & Catalysis
- Vol. 15 (1) , 186-198
Open AccessEffect of Composition of Iron-Cobalt Oxide Catalyst and Process Parameters on The Hydrothermal Liquefaction of Sugarcane Bagasse
Development of catalyst with high deoxygenation activity and optimum process parameters are the key for getting the highest biooil yield with the least oxygen content by hydrothermal liquefaction. With this view, iron-cobalt oxides of Co/Fe ratio 0.33, 1.09, 2.35, and 3.52 were prepared by co-precipitation method, and characterized by XRD, BET surface area, chemical composition by EDX method, and evaluated for hydrothermal liquefaction of sugarcane bagasse in a high-pressure batch reactor under subcritical conditions using CO as process gas to find the optimum Co/Fe ratio and process parameters. Optimum Co/Fe ratio was found to be 1.09 as it gave the highest bio-oil yield of 57.6% with the least oxygen content of 10.8%, attributed to the cobalt ferrite, the major phase present in it. The optimum temperature, initial CO pressure, water/biomass ratio, catalyst/biomass ratio and reaction time for the highest oil yield with the least oxygen content were found to be 250 °C, 45 bar, 28, 0.4, and 120 min, respectively. From the effect of reaction time, it was found that much of the hydrolysis of lignocellulose to water soluble oxygenates, its deoxygenation to bio-oil and its deoxygenation to low oxygen containing bio-oil took place in initial 15 min, 15 to 60 min, and from 30 to 120 min, respectively. Total oil yield (%) was lower by 21% and % oxygen in total oil was higher by 9.9% for spent catalyst compared to fresh catalyst indicating the erosion in the deoxygenation activity of catalyst and thus need for improving its hydrothermal stability. Copyright © 2020 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
- 24 January 2018
- Published by Taylor & Francis in Biofuels
- Vol. 10 (5) , 665-675
Studies on the effect of heterogeneous catalysts on the hydrothermal liquefaction of sugarcane bagasse to low-oxygen-containing bio-oil
Development of suitable catalysts having deep deoxygenation activity is the key for the hydrothermal liquefaction (HTL) of biomass to auto fuels directly. In this study 12 catalysts, namely Fe-MCM-41, Co-MCM-41, Mo-MCM-41, Ti-MCM-41, and oxides of Fe, Co, Mo, Ti, Fe-Mo, Fe-Co, Co-Mo and Ti-Zr, were synthesised, and characterised by X-Ray Diffraction (XRD), textural analysis, Fourier Transform Infra Red (FTIR) and Scanning Electron Microscope (SEM). They were evaluated for HTL of sugarcane bagasse to bio-oil in the presence of hydrogen and carbon monoxide. For non-catalytic HTL, oil obtained in the presence of hydrogen contained less oxygen, whereas for catalytic HTL oil obtained in the presence of carbon monoxide contained less oxygen. Among the catalysts studied, iron-cobalt oxide was found to be the most selective as it gave the highest oil yield of 57.6 weight% containing the least oxygen of 10.8 weight% in the presence of CO. Co-MCM-41 and cobalt oxide yielded bio-oil with the least oxygen among the metal-substituted MCM-41 and metal oxides studied, indicating that cobalt may be the most active catalytic species for strong deoxygenation activity. Metal-substituted MCM-41 yielded oil with less oxygen compared to its simple metal oxides except Ti, which may be due to very high surface area owing to its mesoporous structure.
- 24 January 2018
- Published by Taylor & Francis in Biofuels
- Vol. 10 (5) , 665-675
Studies on the effect of heterogeneous catalysts on the hydrothermal liquefaction of sugarcane bagasse to low-oxygen-containing bio-oil
Development of suitable catalysts having deep deoxygenation activity is the key for the hydrothermal liquefaction (HTL) of biomass to auto fuels directly. In this study 12 catalysts, namely Fe-MCM-41, Co-MCM-41, Mo-MCM-41, Ti-MCM-41, and oxides of Fe, Co, Mo, Ti, Fe-Mo, Fe-Co, Co-Mo and Ti-Zr, were synthesised, and characterised by X-Ray Diffraction (XRD), textural analysis, Fourier Transform Infra Red (FTIR) and Scanning Electron Microscope (SEM). They were evaluated for HTL of sugarcane bagasse to bio-oil in the presence of hydrogen and carbon monoxide. For non-catalytic HTL, oil obtained in the presence of hydrogen contained less oxygen, whereas for catalytic HTL oil obtained in the presence of carbon monoxide contained less oxygen. Among the catalysts studied, iron-cobalt oxide was found to be the most selective as it gave the highest oil yield of 57.6 weight% containing the least oxygen of 10.8 weight% in the presence of CO. Co-MCM-41 and cobalt oxide yielded bio-oil with the least oxygen among the metal-substituted MCM-41 and metal oxides studied, indicating that cobalt may be the most active catalytic species for strong deoxygenation activity. Metal-substituted MCM-41 yielded oil with less oxygen compared to its simple metal oxides except Ti, which may be due to very high surface area owing to its mesoporous structure.