Prashant Pandharinath Said
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Prashant Pandharinath Said has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Dhamchoe Dolma Bhutia
Department of Processing and Food Engineering, College of Agricultural Engineering and Post Harvest Technology, Central Agricultural University, Ranipool, Imphal, India
2 shared publications Shubhangi Srivastava
Department of Process Analytics and Cereal Science, University of Hohenheim, Stuttgart, Germany
2 shared publicationsSujata Jena
Department of Processing and Food Engineering, College of Agricultural Engineering and Post-Harvest Technology, Central Agricultural University, Imphal, India
2 shared publications- Sujata Jena
Department of Processing and Food Engineering, Central Agricultural University, Ranipool, India
2 shared publications Vijay Shankar Kushwaha
Department of Processing and Food Engineering, College of Agricultural Engineering and Post Harvest Technology, Ranipool, Gangtok, India
2 shared publicationsArumugam Balusamy
1 shared publication
Latest Publications
- 17 March 2026
- Published by Springer Nature in Journal of Food Measurement and Characterization
- Vol. 20 (5) , 7116-7130
Advances in understanding fermentation effects and oil absorption mechanisms in fried cereal-based batter-a review
- 17 March 2026
- Published by Springer Nature in Journal of Food Measurement and Characterization
- Vol. 20 (5) , 7116-7130
Advances in understanding fermentation effects and oil absorption mechanisms in fried cereal-based batter-a review
- 22 January 2026
- Published by Springer Nature in Agroforestry Systems
- Vol. 100 (2) , 50
Ethnobotanical edible flowers from the Northeastern Himalaya for food and nutritional security
- 22 January 2026
- Published by Springer Nature in Agroforestry Systems
- Vol. 100 (2) , 50
Ethnobotanical edible flowers from the Northeastern Himalaya for food and nutritional security
- 9 June 2025
- Published by Springer Nature in Journal of Food Measurement and Characterization
- Vol. 19 (9) , 6447-6456
Revolutionizing fast food: composite flour with finger millet, buckwheat, and black gram
- 9 June 2025
- Published by Springer Nature in Journal of Food Measurement and Characterization
- Vol. 19 (9) , 6447-6456
Revolutionizing fast food: composite flour with finger millet, buckwheat, and black gram
- 21 July 2024
- Published by SAGE Publications in Food Science and Technology International
- Vol. 32 (1) , 84-93
Optimization and quality evaluation of functional pasta made from germinated finger millet, buckwheat, and black gram
The investigation was conducted to optimize process variables to manufacture functional pasta from composite flour. The selected grains were steeped, germinated, dried, and milled to produce flour. The flours were mixed at optimized proportions (57.31% buckwheat flour, 12.68% finger millet flour, and 30% paheli dal flour) to produce composite flour. The full factorial experimental design opted for optimization of process variables namely, moisture content (mc) (28, 30, 32, and 34%) and mixing speed (60, 80, 100, and 120 rpm). The optimized multi-grain pasta showed shorter processing time, in-range cooking loss, and higher cooking weight and water absorption capacity (WAC). The highest overall acceptability was recorded for multi-grain pasta processed at 60 rpm with an initial mc of 32%. Proximate analysis of optimized multi-grain pasta showed that pasta contained protein (13.95%), crude fiber (5.05%), ash (2.05%), a lower amount of fat (0.74%), and carbohydrates (71.71%).
- 21 July 2024
- Published by SAGE Publications in Food Science and Technology International
- Vol. 32 (1) , 84-93
Optimization and quality evaluation of functional pasta made from germinated finger millet, buckwheat, and black gram
The investigation was conducted to optimize process variables to manufacture functional pasta from composite flour. The selected grains were steeped, germinated, dried, and milled to produce flour. The flours were mixed at optimized proportions (57.31% buckwheat flour, 12.68% finger millet flour, and 30% paheli dal flour) to produce composite flour. The full factorial experimental design opted for optimization of process variables namely, moisture content (mc) (28, 30, 32, and 34%) and mixing speed (60, 80, 100, and 120 rpm). The optimized multi-grain pasta showed shorter processing time, in-range cooking loss, and higher cooking weight and water absorption capacity (WAC). The highest overall acceptability was recorded for multi-grain pasta processed at 60 rpm with an initial mc of 32%. Proximate analysis of optimized multi-grain pasta showed that pasta contained protein (13.95%), crude fiber (5.05%), ash (2.05%), a lower amount of fat (0.74%), and carbohydrates (71.71%).
- Open Access
- 1 January 2023
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Natural Products and Resources
- Vol. 14 (4) , 666-671
Optimisation of ready-to-cook chayote slices using pilot scale vacuum drying process
Chayote (Sechium edule) fruits have very high moisture content and very soft skins, thus susceptible to spoilage and mechanical damage. Furthermore, due to a lack of suitable storage, transport and processing facilities, huge losses are incurred in terms of quality and quantity. Therefore, the study was conducted to optimise the process parameters of vacuum drying of chayote slices to produce a good quality dehydrated product. The experiments used slice thicknesses of 1, 3, and 5 mm at different temperatures (54 to 66°C). From the analysis using full factorial design and Duncan’s multiple range tests, it was observed that the optimum responses (final moisture content, rehydration ratio, energy consumption, production rate, and total cost) were obtained during vacuum drying of 1 mm chayote slices at 58°C. The results were at par with the treatment consisting of vacuum drying of 3 mm chayote slices at 58°C. From experience, slicing the chayote to 1 mm thickness was too difficult; hence, treatment at 58°C and 3 mm slice thickness may be considered as optimum process condition, which produced dried product with a moisture content of 3.5% at a production rate of 1.662 g d.p./h and had a rehydration ratio of 5.833.
- 1 January 2023
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Natural Products and Resources
- Vol. 14 (4) , 666-671
Open AccessOptimisation of ready-to-cook chayote slices using pilot scale vacuum drying process
Chayote (Sechium edule) fruits have very high moisture content and very soft skins, thus susceptible to spoilage and mechanical damage. Furthermore, due to a lack of suitable storage, transport and processing facilities, huge losses are incurred in terms of quality and quantity. Therefore, the study was conducted to optimise the process parameters of vacuum drying of chayote slices to produce a good quality dehydrated product. The experiments used slice thicknesses of 1, 3, and 5 mm at different temperatures (54 to 66°C). From the analysis using full factorial design and Duncan’s multiple range tests, it was observed that the optimum responses (final moisture content, rehydration ratio, energy consumption, production rate, and total cost) were obtained during vacuum drying of 1 mm chayote slices at 58°C. The results were at par with the treatment consisting of vacuum drying of 3 mm chayote slices at 58°C. From experience, slicing the chayote to 1 mm thickness was too difficult; hence, treatment at 58°C and 3 mm slice thickness may be considered as optimum process condition, which produced dried product with a moisture content of 3.5% at a production rate of 1.662 g d.p./h and had a rehydration ratio of 5.833.
- 25 April 2022
- Published by Agricultural Research Communication Center in Asian Journal of Dairy and Food Research
- No. Of
Quantification of Curcumin Obtained from Supercritical Carbon Dioxide Extraction of Curcuma domestica Valet. Rhizomes
Background: Curcumin is well known bioactive compound available in Curcuma domestica Valet i.e. turmeric. The research work was carried with intention to get maximum yield of medicinally active constituents (Curcumin) of Curcuma domestica Valet. rhizomes through supercritical fluid extraction. Methods: The experiments were conducted in the year 2013-14. Process parameters namely pressure, temperature, flow rate and particle size were optimized using a Taguchi method. During investigation, L9 orthogonal array experimental design was followed. Result: The optimized values of pressure, temperature, flow rate and particle size obtained were 35 MPa, 40°C, 25 g/min and 0.246 mm, respectively. Significant improvement in the yield of curcumin and extract was obtained under optimum operating conditions.
- 25 April 2022
- Published by Agricultural Research Communication Center in Asian Journal of Dairy and Food Research
- No. Of
Quantification of Curcumin Obtained from Supercritical Carbon Dioxide Extraction of Curcuma domestica Valet. Rhizomes
Background: Curcumin is well known bioactive compound available in Curcuma domestica Valet i.e. turmeric. The research work was carried with intention to get maximum yield of medicinally active constituents (Curcumin) of Curcuma domestica Valet. rhizomes through supercritical fluid extraction. Methods: The experiments were conducted in the year 2013-14. Process parameters namely pressure, temperature, flow rate and particle size were optimized using a Taguchi method. During investigation, L9 orthogonal array experimental design was followed. Result: The optimized values of pressure, temperature, flow rate and particle size obtained were 35 MPa, 40°C, 25 g/min and 0.246 mm, respectively. Significant improvement in the yield of curcumin and extract was obtained under optimum operating conditions.
- 1 November 2021
- Published by Elsevier in Scientia Horticulturae
- Vol. 289
Characterization and development of cultivation technology of wild split gill Schizophyllum commune mushroom in India
- 1 November 2021
- Published by Elsevier in Scientia Horticulturae
- Vol. 289
Characterization and development of cultivation technology of wild split gill Schizophyllum commune mushroom in India
- 5 November 2020
- Published by Wiley in Journal of Food Process Engineering
- Vol. 44 (1)
Development of a decorticator for Buchanania lanzan nuts and its process optimization
The study was aimed to develop a decorticator and to standardize the process for separation kernels from nuts. The developed machine was optimized using independent parameters, that is, cold water soaking, steaming, and sand roasting, different moisture levels (7 and 9%), cylinder speed (150 and 300 rpm), and concave clearances (7.5 and 8 mm). The optimum performance of a developed decorticator was obtained when sand roasted nuts (7% moisture content) fed at a cylinder speed of 300 rpm and a concave clearance of 8 mm. At this condition, decortication efficiency, capacity, and whole kernel recovery were 96.10, 64.15, and 12.60%, respectively. The decorticator produced 126 g whole kernels (56.71%) from 1 kg of nuts. The independent process parameters have significant effect on response variables. The machine had low labor requirement, high efficiency, and ease to operate; thus, the results will be useful for processing of nuts and in other studies.Practical applications: The chironji nut decorticator has application to decorticate nuts to produce kernel at manufacturing site of food, flavor, cosmetic, and pharmaceutical industries. The kernels have very short shelf‐life because they are very soft and susceptible to mechanical damage and spoilage. The available decorticators have very limited efficiency and more breakage thus the results can be utilized to fill existing gap to obtain increased efficiency and less damage. The results of different treatments to nuts will assist future studies as well.
- 5 November 2020
- Published by Wiley in Journal of Food Process Engineering
- Vol. 44 (1)
Development of a decorticator for Buchanania lanzan nuts and its process optimization
The study was aimed to develop a decorticator and to standardize the process for separation kernels from nuts. The developed machine was optimized using independent parameters, that is, cold water soaking, steaming, and sand roasting, different moisture levels (7 and 9%), cylinder speed (150 and 300 rpm), and concave clearances (7.5 and 8 mm). The optimum performance of a developed decorticator was obtained when sand roasted nuts (7% moisture content) fed at a cylinder speed of 300 rpm and a concave clearance of 8 mm. At this condition, decortication efficiency, capacity, and whole kernel recovery were 96.10, 64.15, and 12.60%, respectively. The decorticator produced 126 g whole kernels (56.71%) from 1 kg of nuts. The independent process parameters have significant effect on response variables. The machine had low labor requirement, high efficiency, and ease to operate; thus, the results will be useful for processing of nuts and in other studies.Practical applications: The chironji nut decorticator has application to decorticate nuts to produce kernel at manufacturing site of food, flavor, cosmetic, and pharmaceutical industries. The kernels have very short shelf‐life because they are very soft and susceptible to mechanical damage and spoilage. The available decorticators have very limited efficiency and more breakage thus the results can be utilized to fill existing gap to obtain increased efficiency and less damage. The results of different treatments to nuts will assist future studies as well.
- 13 August 2020
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 44 (11)
Optimization of process variables for petha manufacture from chayote ( Sechium edule Sw.)
- 13 August 2020
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 44 (11)
Optimization of process variables for petha manufacture from chayote ( Sechium edule Sw.)