Cristina Vulpe
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Cristina Vulpe has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Andy Fourie
The University of Western Australia
5 shared publications - Susan Gourvenec
University of Southampton
5 shared publications - Nilan Jayasiri
The University of Western Australia Department of Civil, Environmental and Mining Engineering Perth
3 shared publications - Christophe Gaudin
The University of Western Australia
2 shared publications Alexander F. Cornelius
Pritchard Francis, Subiaco, WA 6904, Australia; formerly School of Civil, Environmental and Mining Engineering, The University of Western Australia, Perth, WA 6009, Australia
1 shared publication- Billy Leman
Wellbore Intervention Engineer, Baker Hughes Incorporated, 256 St Georges Terrace, Perth, WA 6000, Australia; formerly, Student, Univ. of Western Australia (M053), 35 Stirling Highway, Crawley, Perth, WA 6009, Australia
1 shared publication
Latest Publications
- 24 June 2026
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Ground Improvement
- p. 1-12
Briefing: A critical reappraisal of quantifying energy consumption during electroosmotic dewatering
Energy consumption during electroosmotic dewatering (EOD) represents the cornerstone of assessing the financial viability of this method for widespread adoption, including implementation in large-scale field applications. Given the significance of this parameter, the available methods for EOD energy consumption, in retrospect, are somewhat incomplete. This paper first discusses the existing methods of interpreting EOD energy consumption and their limitations. This is followed by presenting an alternative approach for interpreting unambiguous values of energy consumption rates during EOD, evaluating the approach by applying it to EOD experiments of various tailings materials and finally comparing the results with prominent case histories. One of the key limitations associated with the existing methods of reporting EOD energy consumption is that they do not incorporate the response of the material being dewatered to the treatment process. To address this issue, the proposed method takes the liquidity index variation into account, thereby enabling the interpretation of energy consumption to provide a unit change in liquidity index for a given unit of dry tailings. Compared to currently available metrics, the proposed approach provides a better indication of the extent of dewatering achieved with respect to kWh utilised.
- 24 June 2026
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Ground Improvement
- p. 1-12
Briefing: A critical reappraisal of quantifying energy consumption during electroosmotic dewatering
Energy consumption during electroosmotic dewatering (EOD) represents the cornerstone of assessing the financial viability of this method for widespread adoption, including implementation in large-scale field applications. Given the significance of this parameter, the available methods for EOD energy consumption, in retrospect, are somewhat incomplete. This paper first discusses the existing methods of interpreting EOD energy consumption and their limitations. This is followed by presenting an alternative approach for interpreting unambiguous values of energy consumption rates during EOD, evaluating the approach by applying it to EOD experiments of various tailings materials and finally comparing the results with prominent case histories. One of the key limitations associated with the existing methods of reporting EOD energy consumption is that they do not incorporate the response of the material being dewatered to the treatment process. To address this issue, the proposed method takes the liquidity index variation into account, thereby enabling the interpretation of energy consumption to provide a unit change in liquidity index for a given unit of dry tailings. Compared to currently available metrics, the proposed approach provides a better indication of the extent of dewatering achieved with respect to kWh utilised.
- 30 March 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Développements d’indicateurs de qualité dans la modélisation des ouvrages géotechniques par la méthode des éléments finis : applications aux soutènements
Notre thèse propose d'étudier la précision des calculs par la méthode des éléments finis (MEF) au moyen "d'indicateurs de qualité". Les indicateurs de qualité représentent des formules simples qui permettent d'évaluer la qualité des calculs par éléments finis. La qualité de l'analyse numérique est évaluée par rapport à la discrétisation. Le modèle mathématique est considéré correct et les erreurs résultant du choix des propriétés des matériaux ne sont pas pris en compte. Nous avons défini les formulations mathématiques de ces indicateurs de qualité, ainsi que leurs limites inférieures et supérieures. Grâce au choix de formulations simples, il est facile de les introduire dans un logiciel de calcul par éléments finis. Ils ont été implémentés dans le code de calcul CESAR-LCPC, module Mécanique en Comportement Non Linéaire. Afin de démontrer qu'ils ont été correctement définis et de tester leur fiabilité, ces indicateurs de qualité sont testés sur un certain nombre de problèmes simples en 2D et en 3D. Après avoir prouvé leur capacité à caractériser la qualité de la discrétisation des modèles d'éléments finis, nous les avons testés sur le cas d'une excavation de palplanches butonnées (site expérimental de Hochstetten, près de Karlsruhe). La précision des résultats en termes de propriétés mécaniques choisies pour le sol et les structures n'a pas été étudiée. Nous avons également démontré que les résultats sont indépendants des propriétés mécaniques choisies pour le sol ou la structure
- 30 March 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Développements d’indicateurs de qualité dans la modélisation des ouvrages géotechniques par la méthode des éléments finis : applications aux soutènements
Notre thèse propose d'étudier la précision des calculs par la méthode des éléments finis (MEF) au moyen "d'indicateurs de qualité". Les indicateurs de qualité représentent des formules simples qui permettent d'évaluer la qualité des calculs par éléments finis. La qualité de l'analyse numérique est évaluée par rapport à la discrétisation. Le modèle mathématique est considéré correct et les erreurs résultant du choix des propriétés des matériaux ne sont pas pris en compte. Nous avons défini les formulations mathématiques de ces indicateurs de qualité, ainsi que leurs limites inférieures et supérieures. Grâce au choix de formulations simples, il est facile de les introduire dans un logiciel de calcul par éléments finis. Ils ont été implémentés dans le code de calcul CESAR-LCPC, module Mécanique en Comportement Non Linéaire. Afin de démontrer qu'ils ont été correctement définis et de tester leur fiabilité, ces indicateurs de qualité sont testés sur un certain nombre de problèmes simples en 2D et en 3D. Après avoir prouvé leur capacité à caractériser la qualité de la discrétisation des modèles d'éléments finis, nous les avons testés sur le cas d'une excavation de palplanches butonnées (site expérimental de Hochstetten, près de Karlsruhe). La précision des résultats en termes de propriétés mécaniques choisies pour le sol et les structures n'a pas été étudiée. Nous avons également démontré que les résultats sont indépendants des propriétés mécaniques choisies pour le sol ou la structure
- Open Access
- 1 January 2026
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 63, 1-26
Electroosmotic treatment of sand washery tailings and the improved geotechnical characteristics
Placement of soil covers over slurry deposited tailings, which are typically characterised by poor undrained shear strength involves significant risks and challenges, from a geotechnical viewpoint. Dewatering by means of applying an electric current, also referred to as electroosmotic (EO) dewatering technology is known to improve weak soil deposits. A laboratory study was undertaken to study the improved geotechnical characteristics of electroosmotically treated (EO treated) material through testing of sand washery tailings. To this end, EO dewatering experiments were carried out at varying voltage gradients using a purpose built EO cell. The properties of the EO treated tailings, including strength and compressibility characteristics were then characterised using laboratory element testing such as direct simple shear and oedometer tests to compare with the typical characteristics of untreated material. The results indicated that EO treatment increased the preconsolidation pressure of the tailings by three to nine times in the cathode region and six to fifteen times in the anode region, depending on the adopted voltage gradient. Owing to the overconsolidation effects induced by the EO treatment, strength gains of up to 664% were observed in the anode region of the experiment conducted with the maximum voltage gradient of 150 V/m.
- 1 January 2026
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 63, 1-26
Open AccessElectroosmotic treatment of sand washery tailings and the improved geotechnical characteristics
Placement of soil covers over slurry deposited tailings, which are typically characterised by poor undrained shear strength involves significant risks and challenges, from a geotechnical viewpoint. Dewatering by means of applying an electric current, also referred to as electroosmotic (EO) dewatering technology is known to improve weak soil deposits. A laboratory study was undertaken to study the improved geotechnical characteristics of electroosmotically treated (EO treated) material through testing of sand washery tailings. To this end, EO dewatering experiments were carried out at varying voltage gradients using a purpose built EO cell. The properties of the EO treated tailings, including strength and compressibility characteristics were then characterised using laboratory element testing such as direct simple shear and oedometer tests to compare with the typical characteristics of untreated material. The results indicated that EO treatment increased the preconsolidation pressure of the tailings by three to nine times in the cathode region and six to fifteen times in the anode region, depending on the adopted voltage gradient. Owing to the overconsolidation effects induced by the EO treatment, strength gains of up to 664% were observed in the anode region of the experiment conducted with the maximum voltage gradient of 150 V/m.
- Open Access
- 26 August 2025
- Published by Elsevier in Geotextiles and Geomembranes
- Vol. 53 (6) , 1623-1643
Influence of initial water content and voltage gradient on electroosmotic dewatering of ultra-fine soils using novel electrokinetic geosynthetics
- 26 August 2025
- Published by Elsevier in Geotextiles and Geomembranes
- Vol. 53 (6) , 1623-1643
Open AccessInfluence of initial water content and voltage gradient on electroosmotic dewatering of ultra-fine soils using novel electrokinetic geosynthetics
- 1 January 2025
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 62, 1-18
Shear wave velocity and small-strain stiffness across a broad range of states in iron ore tailings
Recent failures of iron ore tailings storage facilities highlight gaps in understanding the behaviour of these materials. Stiffness is an important tool in the assessment of static liquefaction triggering and the monitoring of potential dam degradation that may result. This study evaluated the variation of the elastic stiffness across a wide range of void ratios and fines content and proposes a new model for the variation of shear modulus with mean effective stress. As commonly found, the shear wave velocity is more stress dependent for tailings in a loose state than in a dense state, but compared to “natural” soils, the shear modulus is significantly affected by the heavy (high specific gravity) fines content. These outcomes suggest that the addition of heavy fines (specific gravity > 3.5 vs. ∼2.7 of most natural soils) can increase the shear modulus without increasing the shear wave velocity. From these results, a boundary anchored to the state parameter that separates contractive and dilatative behaviour can be found using Vs measurements. This provides an important monitoring tool for iron-ore tailings dams in light of two recent failures (Fundão and Feijão) that displayed minimal prior warning.
- 1 January 2025
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 62, 1-18
Shear wave velocity and small-strain stiffness across a broad range of states in iron ore tailings
Recent failures of iron ore tailings storage facilities highlight gaps in understanding the behaviour of these materials. Stiffness is an important tool in the assessment of static liquefaction triggering and the monitoring of potential dam degradation that may result. This study evaluated the variation of the elastic stiffness across a wide range of void ratios and fines content and proposes a new model for the variation of shear modulus with mean effective stress. As commonly found, the shear wave velocity is more stress dependent for tailings in a loose state than in a dense state, but compared to “natural” soils, the shear modulus is significantly affected by the heavy (high specific gravity) fines content. These outcomes suggest that the addition of heavy fines (specific gravity > 3.5 vs. ∼2.7 of most natural soils) can increase the shear modulus without increasing the shear wave velocity. From these results, a boundary anchored to the state parameter that separates contractive and dilatative behaviour can be found using Vs measurements. This provides an important monitoring tool for iron-ore tailings dams in light of two recent failures (Fundão and Feijão) that displayed minimal prior warning.
- 24 October 2024
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
Effect of shear-induced consolidation on the behaviour of a loose silt tailings
Tailings within a tailings storage facility (TSF) are subjected to monotonic loading and consolidation following tailings depositions into the impoundment and perimeter embankment raises. The aim of the current study was to identify how monotonic loading followed by consolidation influences the behaviour of a loose silt tailings deposit. The study quantified the effect of magnitude and duration of an applied monotonic load on the evolving undrained shear strength using triaxial testing. It also showed that peak undrained shear strengths are reached under lower shear-induced excess pore pressures and axial strains than inferred from standard triaxial testing. While the study showed how tailings benefitted from gains in peak undrained shear strength, it also highlighted some potential negative implications for timely detection of precursors to failure of TSFs by means of conventional monitoring.
- 24 October 2024
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
Effect of shear-induced consolidation on the behaviour of a loose silt tailings
Tailings within a tailings storage facility (TSF) are subjected to monotonic loading and consolidation following tailings depositions into the impoundment and perimeter embankment raises. The aim of the current study was to identify how monotonic loading followed by consolidation influences the behaviour of a loose silt tailings deposit. The study quantified the effect of magnitude and duration of an applied monotonic load on the evolving undrained shear strength using triaxial testing. It also showed that peak undrained shear strengths are reached under lower shear-induced excess pore pressures and axial strains than inferred from standard triaxial testing. While the study showed how tailings benefitted from gains in peak undrained shear strength, it also highlighted some potential negative implications for timely detection of precursors to failure of TSFs by means of conventional monitoring.
- 1 February 2017
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 54 (2) , 158-172
Effect of embedment on consolidated undrained capacity of skirted circular foundations in soft clay under planar loading
The effect of foundation embedment ratio and soil–skirt interface roughness on the consolidated undrained capacity of skirted circular foundations under planar loading in normally consolidated clay has been investigated through coupled three-dimensional finite element analyses. Results are presented as failure envelopes, and changes in shape and size of the normalized vertical–horizontal–moment (VHM) failure envelopes are described as a function of relative magnitude and duration of applied preload. Results show that embedment ratio and interface roughness affect the load distribution within the soil mass, but that consolidated undrained capacity under planar loading scales proportionately with the (unconsolidated) undrained capacity of the foundation. This latter feature enables the results to be neatly synthesized into a relatively straightforward method for use in engineering practice for prediction of gain in undrained VHM capacity due to preload and consolidation.
- 1 February 2017
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 54 (2) , 158-172
Effect of embedment on consolidated undrained capacity of skirted circular foundations in soft clay under planar loading
The effect of foundation embedment ratio and soil–skirt interface roughness on the consolidated undrained capacity of skirted circular foundations under planar loading in normally consolidated clay has been investigated through coupled three-dimensional finite element analyses. Results are presented as failure envelopes, and changes in shape and size of the normalized vertical–horizontal–moment (VHM) failure envelopes are described as a function of relative magnitude and duration of applied preload. Results show that embedment ratio and interface roughness affect the load distribution within the soil mass, but that consolidated undrained capacity under planar loading scales proportionately with the (unconsolidated) undrained capacity of the foundation. This latter feature enables the results to be neatly synthesized into a relatively straightforward method for use in engineering practice for prediction of gain in undrained VHM capacity due to preload and consolidation.
- 1 December 2016
- Published by Emerald Publishing in Géotechnique
- Vol. 66 (12) , 1028-1034
Consolidated undrained capacity of shallow foundations subjected to self-weight and horizontal in-service loading
The effect of subsea infrastructure self-weight and pipeline in-service horizontal loading on the consolidated undrained capacity of deep-water shallow foundations was investigated by means of fully coupled three-dimensional finite-element analyses. The results show that the undrained uniaxial and combined capacity increase under horizontal preloading and over realistic in-field loading time regimes. The gain in undrained capacity is quantified through simple equations incorporating a critical state soil mechanics framework and is defined as a function of magnitude and duration of vertical and horizontal preload, foundation embedment ratio and soil–skirt interface roughness.
- 1 December 2016
- Published by Emerald Publishing in Géotechnique
- Vol. 66 (12) , 1028-1034
Consolidated undrained capacity of shallow foundations subjected to self-weight and horizontal in-service loading
The effect of subsea infrastructure self-weight and pipeline in-service horizontal loading on the consolidated undrained capacity of deep-water shallow foundations was investigated by means of fully coupled three-dimensional finite-element analyses. The results show that the undrained uniaxial and combined capacity increase under horizontal preloading and over realistic in-field loading time regimes. The gain in undrained capacity is quantified through simple equations incorporating a critical state soil mechanics framework and is defined as a function of magnitude and duration of vertical and horizontal preload, foundation embedment ratio and soil–skirt interface roughness.
- 1 August 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 142 (8)
Failure Envelope Approach for Consolidated Undrained Capacity of Shallow Foundations
A generalized framework is applied to predict consolidated undrained VHM failure envelopes for surface circular and strip foundations. The failure envelopes for consolidated undrained conditions are shown to be scaled from those for unconsolidated undrained conditions by the uniaxial consolidated undrained capacities, which are predicted through a theoretical framework based on fundamental critical state soil mechanics. The framework is applied to results from small-strain finite-element analyses for a strip and circular foundation of selected foundation dimension and soil conditions, and the versatility of the framework is validated through a parametric study. The generalized theoretical framework enables consolidated undrained VHM failure envelopes to be determined for a practical range of foundation sizes and linearly increasing soil shear-strength profiles through the expressions presented in this paper.
- 1 August 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 142 (8)
Failure Envelope Approach for Consolidated Undrained Capacity of Shallow Foundations
A generalized framework is applied to predict consolidated undrained VHM failure envelopes for surface circular and strip foundations. The failure envelopes for consolidated undrained conditions are shown to be scaled from those for unconsolidated undrained conditions by the uniaxial consolidated undrained capacities, which are predicted through a theoretical framework based on fundamental critical state soil mechanics. The framework is applied to results from small-strain finite-element analyses for a strip and circular foundation of selected foundation dimension and soil conditions, and the versatility of the framework is validated through a parametric study. The generalized theoretical framework enables consolidated undrained VHM failure envelopes to be determined for a practical range of foundation sizes and linearly increasing soil shear-strength profiles through the expressions presented in this paper.
- 1 August 2015
- Published by Emerald Publishing in Géotechnique
- Vol. 65 (8) , 669-683
Design method for the undrained capacity of skirted circular foundations under combined loading: effect of deformable soil plug
The response of skirted circular foundations with rough and smooth soil–skirt interface to combined loading is investigated. The shape and size of the failure envelopes of the skirted circular foundations under a practical range of embedment ratio, soil strength heterogeneity, soil–skirt interface and level of vertical mobilisation are compared to those of solid embedded circular foundations and skirted strip foundations. The results show that both the foundation geometry and soil plug inside the skirt compartment significantly influence the uniaxial capacity and the shape and size of the failure envelopes. Approximating expressions for solid embedded foundations do not capture the shifting eccentricity of the failure envelopes of the skirted circular foundations. A new approximating solution for describing the failure envelope as a function of embedment ratio, soil strength heterogeneity and soil–skirt interface is proposed. Scaling factors accounting for the decreasing uniaxial capacity of skirted foundations with smooth soil–skirt interface are also defined.
- 1 August 2015
- Published by Emerald Publishing in Géotechnique
- Vol. 65 (8) , 669-683
Design method for the undrained capacity of skirted circular foundations under combined loading: effect of deformable soil plug
The response of skirted circular foundations with rough and smooth soil–skirt interface to combined loading is investigated. The shape and size of the failure envelopes of the skirted circular foundations under a practical range of embedment ratio, soil strength heterogeneity, soil–skirt interface and level of vertical mobilisation are compared to those of solid embedded circular foundations and skirted strip foundations. The results show that both the foundation geometry and soil plug inside the skirt compartment significantly influence the uniaxial capacity and the shape and size of the failure envelopes. Approximating expressions for solid embedded foundations do not capture the shifting eccentricity of the failure envelopes of the skirted circular foundations. A new approximating solution for describing the failure envelope as a function of embedment ratio, soil strength heterogeneity and soil–skirt interface is proposed. Scaling factors accounting for the decreasing uniaxial capacity of skirted foundations with smooth soil–skirt interface are also defined.