Sumanshu Agarwal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Sumanshu Agarwal has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
Pradeep R. Nair
Department of Electrical Engineering, Indian Institute of Technology Bombay Mumbai 400076 India
5 shared publications- Pradeep R. Nair
Department of Electrical Engineering Indian Institute of Technology Bombay Mumbai India
4 shared publications Vikas Nandal
Nanomaterials Research Institute, National Institute of Advanced Industrial Science and Technology 2 , 1-1-1 Higashi, Tsukuba, Ibaraki 305-8565, Japan
3 shared publications- Anand Selvin Subbiah
Center for Renewable Energy and Storage Technologies (CREST), Physical Sciences and Engineering Division (PSE)
2 shared publications Kundan Kumar
Department of Electronics and Communication Engineering, Institute of Technical Education and Research, Siksha ‘O’ Anusandhan (Deemed to be University) 1 , Bhubaneswar, Odisha 751030, India
2 shared publications- Kundan Kumar
Siksha ‘O’ Anusandhan (Deemed to be University)
2 shared publications
Latest Publications
- 17 May 2022
- Published by Springer Nature
- p. 109-117
Process Design to Self-extract Text from Images for Similarity Check
- 17 May 2022
- Published by Springer Nature
- p. 109-117
Process Design to Self-extract Text from Images for Similarity Check
- 11 October 2021
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 23 (42) , 24421-24427
Deciphering the capacitance frequency technique for performance-limiting defect-state parameters in energy-harvesting perovskites
Using the capacitance frequency technique, strategies to accurately predict the trap-state parameters of energy conversion in perovskites are developed.
- 11 October 2021
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 23 (42) , 24421-24427
Deciphering the capacitance frequency technique for performance-limiting defect-state parameters in energy-harvesting perovskites
Using the capacitance frequency technique, strategies to accurately predict the trap-state parameters of energy conversion in perovskites are developed.
- 24 May 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 129 (20) , 203101
Antimony chalcogenide-based thin film solar cells: Device engineering routes to boost the performance
The use of stibnite (Sb2S3) as a light-harvesting material in thin film solar cells has received considerable research interest during the transition of the millennium. However, the use of perovskite diminished the research in the field, and the potential of antimony Chalcogenides [Sb2(S,Se)3] was not explored thoroughly. Although these materials also provide bandgap tuning like perovskite, by varying the composition of S and Se, it is not as popular as perovskite for the fabrication of solar cells mainly because of the low efficiency of the solar cells based on it. In this paper, we present a landscape of the functional role of various device parameters on the performance of Sb2(S,Se)3-based solar cells. For this purpose, we first calibrate the optoelectronic model used for simulation with the experimental results from the literature. The model is then subjected to parametric variations to explore the performance metrics for this class of solar cells. Our results show that despite the belief that the open circuit voltage is independent of contact layers’ doping in proper band-aligned carrier selective thin film solar cells, here we observe otherwise and the open circuit voltage is indeed dependent on the doping density of the contact layers. Using the detailed numerical simulation and analytical model, we further identify the performance optimization route for Sb2(S,Se)3-based thin film solar cells.
- 24 May 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 129 (20) , 203101
Antimony chalcogenide-based thin film solar cells: Device engineering routes to boost the performance
The use of stibnite (Sb2S3) as a light-harvesting material in thin film solar cells has received considerable research interest during the transition of the millennium. However, the use of perovskite diminished the research in the field, and the potential of antimony Chalcogenides [Sb2(S,Se)3] was not explored thoroughly. Although these materials also provide bandgap tuning like perovskite, by varying the composition of S and Se, it is not as popular as perovskite for the fabrication of solar cells mainly because of the low efficiency of the solar cells based on it. In this paper, we present a landscape of the functional role of various device parameters on the performance of Sb2(S,Se)3-based solar cells. For this purpose, we first calibrate the optoelectronic model used for simulation with the experimental results from the literature. The model is then subjected to parametric variations to explore the performance metrics for this class of solar cells. Our results show that despite the belief that the open circuit voltage is independent of contact layers’ doping in proper band-aligned carrier selective thin film solar cells, here we observe otherwise and the open circuit voltage is indeed dependent on the doping density of the contact layers. Using the detailed numerical simulation and analytical model, we further identify the performance optimization route for Sb2(S,Se)3-based thin film solar cells.
- 3 April 2021
- Published by Springer Nature
- p. 127-133
Performance Evaluation of Perovskite Solar Cells at Elevated Temperatures
- 3 April 2021
- Published by Springer Nature
- p. 127-133
Performance Evaluation of Perovskite Solar Cells at Elevated Temperatures
- Open Access
Blood Vessel Detection using Modified Multiscale MF-FDOG Filters for Diabetic Retinopathy
Blindness in diabetic patients caused by retinopathy (characterized by an increase in the diameter and new branches of the blood vessels inside the retina) is a grave concern. Many efforts have been made for the early detection of the disease using various image processing techniques on retinal images. However, most of the methods are plagued with the false detection of the blood vessel pixels. Given that, here, we propose a modified matched filter with the first derivative of Gaussian. The method uses the top-hat transform and contrast limited histogram equalization. Further, we segment the modified multiscale matched filter response by using a binary threshold obtained from the first derivative of Gaussian. The method was assessed on a publicly available database (DRIVE database). As anticipated, the proposed method provides a higher accuracy compared to the literature. Moreover, a lesser false detection from the existing matched filters and its variants have been observed.
Open AccessBlood Vessel Detection using Modified Multiscale MF-FDOG Filters for Diabetic Retinopathy
Blindness in diabetic patients caused by retinopathy (characterized by an increase in the diameter and new branches of the blood vessels inside the retina) is a grave concern. Many efforts have been made for the early detection of the disease using various image processing techniques on retinal images. However, most of the methods are plagued with the false detection of the blood vessel pixels. Given that, here, we propose a modified matched filter with the first derivative of Gaussian. The method uses the top-hat transform and contrast limited histogram equalization. Further, we segment the modified multiscale matched filter response by using a binary threshold obtained from the first derivative of Gaussian. The method was assessed on a publicly available database (DRIVE database). As anticipated, the proposed method provides a higher accuracy compared to the literature. Moreover, a lesser false detection from the existing matched filters and its variants have been observed.
- Open Access
- 13 May 2019
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2105 (1) , 020026
First-order calculations of performance metrics of perovskite/Si tandem solar cells
The impressive optoelectronic properties of perovskite along with its optimal bandgap for application in a tandem solar cell has resulted in a lot of research interest in the field of perovskite/Si tandem solar cells. However, due to the lack of clarity of the design space optimization, the progress in the area is slow. In that context, here, we calculate the limiting performance metrics of perovskite/Si tandem solar cell as a function of active layers thicknesses and accordingly identify the optimum thicknesses of the active layer. Our results show that while the thickness of perovskite affects the performance of the device largely, the effect of the thickness of Si is nominal. Further, due to the increase in the two counter processes i.e., generation rate and recombination rate in the device with the thickness, there exist a pair of optimum thickness; and we elucidate the same. Indeed, our modelling methodology and results provide the direction for design space optimization of the perovskite/Si tandem solar cells.
- 13 May 2019
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2105 (1) , 020026
Open AccessFirst-order calculations of performance metrics of perovskite/Si tandem solar cells
The impressive optoelectronic properties of perovskite along with its optimal bandgap for application in a tandem solar cell has resulted in a lot of research interest in the field of perovskite/Si tandem solar cells. However, due to the lack of clarity of the design space optimization, the progress in the area is slow. In that context, here, we calculate the limiting performance metrics of perovskite/Si tandem solar cell as a function of active layers thicknesses and accordingly identify the optimum thicknesses of the active layer. Our results show that while the thickness of perovskite affects the performance of the device largely, the effect of the thickness of Si is nominal. Further, due to the increase in the two counter processes i.e., generation rate and recombination rate in the device with the thickness, there exist a pair of optimum thickness; and we elucidate the same. Indeed, our modelling methodology and results provide the direction for design space optimization of the perovskite/Si tandem solar cells.
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 82-86
Blood Vessel Detection Using Modified Multiscale MF-FDOG Filters for Diabetic Retinopathy
Blindness in diabetic patients caused by retinopathy (characterized by an increase in the diameter and new branches of the blood vessels inside the retina) is a grave concern. Many efforts have been made for the early detection of the disease using various image processing techniques on retinal images. However, most of the methods are plagued with the false detection of the blood vessel pixels. Given that, here, we propose a modified matched filter with the first derivative of Gaussian. The method uses the top-hat transform and contrast limited histogram equalization. Further, we segment the modified multiscale matched filter response by using a binary threshold obtained from the first derivative of Gaussian. The method was assessed on a publicly available database (DRIVE database). As anticipated, the proposed method provides a higher accuracy compared to the literature. Moreover, a lesser false detection from the existing matched filters and its variants have been observed.
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 82-86
Blood Vessel Detection Using Modified Multiscale MF-FDOG Filters for Diabetic Retinopathy
Blindness in diabetic patients caused by retinopathy (characterized by an increase in the diameter and new branches of the blood vessels inside the retina) is a grave concern. Many efforts have been made for the early detection of the disease using various image processing techniques on retinal images. However, most of the methods are plagued with the false detection of the blood vessel pixels. Given that, here, we propose a modified matched filter with the first derivative of Gaussian. The method uses the top-hat transform and contrast limited histogram equalization. Further, we segment the modified multiscale matched filter response by using a binary threshold obtained from the first derivative of Gaussian. The method was assessed on a publicly available database (DRIVE database). As anticipated, the proposed method provides a higher accuracy compared to the literature. Moreover, a lesser false detection from the existing matched filters and its variants have been observed.
- 9 November 2018
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 124 (18) , 183101
Performance loss analysis and design space optimization of perovskite solar cells
While the performance enhancement witnessed in the field of perovskite solar cells over the recent years has been impressive, a detailed analysis of various loss mechanisms is required for further performance optimization. Here, we address the same through numerical simulations of optical and electrical characteristics. We quantify various losses like optical losses (5%–6%), recombination losses (3%–4%), and resistive losses against the Auger recombination induced practical efficiency limits. Through this, we identify schemes to reduce these losses and hence lead to an increase in efficiency. In addition, we find that the optimum thickness of the perovskite (with material parameters comparable to MAPbI3-xClx and Eg = 1.55 eV) for solar cell fabrication is around 300 nm (comparable to the well-established value); however, the same could be as large as 900 nm for a trap free perovskite (∼ms as the minority carrier Shockley-Read-Hall recombination lifetime). The analyses also enable us to provide the design charts that could lead to >25% efficient perovskite solar cells on the planar structure.
- 9 November 2018
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 124 (18) , 183101
Performance loss analysis and design space optimization of perovskite solar cells
While the performance enhancement witnessed in the field of perovskite solar cells over the recent years has been impressive, a detailed analysis of various loss mechanisms is required for further performance optimization. Here, we address the same through numerical simulations of optical and electrical characteristics. We quantify various losses like optical losses (5%–6%), recombination losses (3%–4%), and resistive losses against the Auger recombination induced practical efficiency limits. Through this, we identify schemes to reduce these losses and hence lead to an increase in efficiency. In addition, we find that the optimum thickness of the perovskite (with material parameters comparable to MAPbI3-xClx and Eg = 1.55 eV) for solar cell fabrication is around 300 nm (comparable to the well-established value); however, the same could be as large as 900 nm for a trap free perovskite (∼ms as the minority carrier Shockley-Read-Hall recombination lifetime). The analyses also enable us to provide the design charts that could lead to >25% efficient perovskite solar cells on the planar structure.
- 29 November 2017
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 12 (1)
Hall Mobility of As‐Grown Cu2O Thin Films Obtained Via Electrodeposition on Patterned Au Substrates
Hall measurement of an electrodeposited Cu2O film is rendered difficult as the bilayer structure of semiconductor on top of a conductive substrate obviates the measurement. Here, we propose the use of a patterned Au on glass substrate in line/space configuration for the Hall measurement of electrodeposited Cu2O. A continuous, (111) oriented Cu2O film was electrodeposited on 8 μm/2 μm Au‐line/space on glass substrate and Hall measurement was performed. The room temperature Hall measurement of the Cu2O film on the patterned substrate indicates p‐type conduction with a hole concentration of 2.2 × 1017 cm−3 and mobility of 4.7 × 10−3 cm2 V−1 s−1. Additionally, the temperature dependent resistivity exhibits a negative slope that is characteristic of a semiconductor. Therefore, the measured electrical characteristics can be attributed to the electrodeposited Cu2O semiconductor film rather than the conductive substrate. This method can be applied for the Hall measurement of any other electrodeposited semiconductor by optimizing the line/space geometry of the conductive substrate.
- 29 November 2017
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 12 (1)
Hall Mobility of As‐Grown Cu2O Thin Films Obtained Via Electrodeposition on Patterned Au Substrates
Hall measurement of an electrodeposited Cu2O film is rendered difficult as the bilayer structure of semiconductor on top of a conductive substrate obviates the measurement. Here, we propose the use of a patterned Au on glass substrate in line/space configuration for the Hall measurement of electrodeposited Cu2O. A continuous, (111) oriented Cu2O film was electrodeposited on 8 μm/2 μm Au‐line/space on glass substrate and Hall measurement was performed. The room temperature Hall measurement of the Cu2O film on the patterned substrate indicates p‐type conduction with a hole concentration of 2.2 × 1017 cm−3 and mobility of 4.7 × 10−3 cm2 V−1 s−1. Additionally, the temperature dependent resistivity exhibits a negative slope that is characteristic of a semiconductor. Therefore, the measured electrical characteristics can be attributed to the electrodeposited Cu2O semiconductor film rather than the conductive substrate. This method can be applied for the Hall measurement of any other electrodeposited semiconductor by optimizing the line/space geometry of the conductive substrate.