Hamdi Rifai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hamdi Rifai has a total of 81 co-authors. Here are the top co-authors by number of shared publications:
Rizaldi Putra
Department of Physics, Universitas Negeri Padang, Padang 25131, Indonesia.
3 shared publicationsAhmad Fauzi
Universitas Negeri Padang
2 shared publications- Caroline Bouvet de Maisonneuve
Earth Observatory of Singapore and Asian School of the Environment, Nanyang Technological University, Singapore, Singapore
2 shared publications Christopher M. Wurster
College of Science and Engineering James Cook University, PO Box 6811, Cairns, Queensland 4870, Australia.,ARC Centre of Excellence for Australian Biodiversity and Heritage James Cook University, PO Box 6811, Cairns, Queensland 4870, Australia.
2 shared publications- Francesca Forni
Dipartimento di Scienze della Terra “Ardito Desio”, Università degli Studi di Milano, Milan, Italy
2 shared publications Husna Husna
Universitas PGRI Sumatera Barat
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Faculty of Mining, Geology and Petroleum Engineering in Rudarsko-geološko-naftni zbornik
- Vol. 41 (3) , 185-195
MAGNETIC CHARACTERISTICS AND MINERALOGY OF CAVE SEDIMENTS FROM SOLEK CAVE, WEST SUMATRA: IMPLICATIONS FOR PALEOENVIRONMENTAL PROCESSES WITHIN THE CAVE
Cave sediments are essential as they preserve valuable archives of past environmental and climate conditions that physical and chemical measurements can reveal. In this study, we explore the magnetic characteristics of the cave sediments collected from Solek Cave, West Sumatra, Indonesia to understand environmental processes within the cave. We employed rock magnetic methods, including magnetic susceptibility, isothermal remanent magnetization (IRM), anhysteretic remanent magnetization (ARM), and Curie temperature measurements. Additionally, we used X-ray diffraction (XRD) and scanning electron microscopy (SEM) in order to analyze the magnetic mineralogy and morphology of the cave sediments. The results show a high concentration of magnetic minerals, specifically ferrimagnetic groups, indicated by high magnetic susceptibility ranging between 210.7 and 1301.2 × 10-8 m3/kg, with a mean value of 602.7 × 10-8 m3/kg. The calculated χFD (%) values ranged from 0.2 to 6.6, mostly less than 2%, indicating coarse-grained, multidomain ferrimagnetic minerals. Moreover, results from IRM, ARM and XRD show that the magnetic minerals are dominated by coarsegrained magnetite with a grain size of around 20 to 110 μm. Curie temperature measurements also exhibit various titanium proportions, forming a titanomagnetite phase. The morphology and chemical compositions of the magnetic minerals, determined by SEM and energy-dispersive X-ray spectroscopy (EDS), also support the previous analyses, showing that titanomagnetite is the dominant phase, characterized by coarse grain size and angular shape. The uniformity of the magnetic characteristics and mineralogy suggests a titanomagnetite mineral source likely driven by lithogenic processes such as erosion and fluvial events.
- 1 January 2026
- Published by Faculty of Mining, Geology and Petroleum Engineering in Rudarsko-geološko-naftni zbornik
- Vol. 41 (3) , 185-195
Open AccessMAGNETIC CHARACTERISTICS AND MINERALOGY OF CAVE SEDIMENTS FROM SOLEK CAVE, WEST SUMATRA: IMPLICATIONS FOR PALEOENVIRONMENTAL PROCESSES WITHIN THE CAVE
Cave sediments are essential as they preserve valuable archives of past environmental and climate conditions that physical and chemical measurements can reveal. In this study, we explore the magnetic characteristics of the cave sediments collected from Solek Cave, West Sumatra, Indonesia to understand environmental processes within the cave. We employed rock magnetic methods, including magnetic susceptibility, isothermal remanent magnetization (IRM), anhysteretic remanent magnetization (ARM), and Curie temperature measurements. Additionally, we used X-ray diffraction (XRD) and scanning electron microscopy (SEM) in order to analyze the magnetic mineralogy and morphology of the cave sediments. The results show a high concentration of magnetic minerals, specifically ferrimagnetic groups, indicated by high magnetic susceptibility ranging between 210.7 and 1301.2 × 10-8 m3/kg, with a mean value of 602.7 × 10-8 m3/kg. The calculated χFD (%) values ranged from 0.2 to 6.6, mostly less than 2%, indicating coarse-grained, multidomain ferrimagnetic minerals. Moreover, results from IRM, ARM and XRD show that the magnetic minerals are dominated by coarsegrained magnetite with a grain size of around 20 to 110 μm. Curie temperature measurements also exhibit various titanium proportions, forming a titanomagnetite phase. The morphology and chemical compositions of the magnetic minerals, determined by SEM and energy-dispersive X-ray spectroscopy (EDS), also support the previous analyses, showing that titanomagnetite is the dominant phase, characterized by coarse grain size and angular shape. The uniformity of the magnetic characteristics and mineralogy suggests a titanomagnetite mineral source likely driven by lithogenic processes such as erosion and fluvial events.
- Open Access
- 31 December 2025
- Published by Tinta Emas Publisher in Frontier Advances in Applied Science and Engineering
- Vol. 3 (2) , 99-106
Magnetic Susceptibility of Pumice in the Area Around Mount Singgalang, West Sumatra
Mount Singgalang is a volcano that has erupted after 1600. Several types of volcanic rocks found around the Mount Singgalang area are Basalt, Andesite, Tuff Breccia, Lava Breccia, and Pumice tuff. Where, andesite and tuff pumice Mount Singgalang originated from the maninjau eruption. Pumice has several minerals, namely cristobalite, feldspar, quartz, obsidian, cristobalite, and tridymite. Pumice has one of the magnetic minerals, namely hematite (Fe2O3), but it is not known how much magnetic mineral content in it. This study aims to determine the abundance of magnetic minerals (magnetic susceptibility) in pumice around Mount Singgalang, West Sumatra. The method used is the rock magnetism method, where this method can investigate the magnetic properties of a material. The instrument used is the Bartington Magnetic Susceptibility Meter. The magnetic susceptibility value of Pumice (Pumice) in the area around Mount Singgalang, West Sumatra, where is the abundance of magnetic minerals in Pumice Rock TDK 20-02 > TDK 20-03 > TDK 20-10. The TDK 20-02 sample has a lot of superparamagnetic grains due to its low susceptibility value and high-Frequency Dependent Susceptibility, while the TDK 20-10 sample has little or almost no superparamagnetic grains due to the high susceptibility value and low-Frequency Dependent Susceptibility.
- 31 December 2025
- Published by Tinta Emas Publisher in Frontier Advances in Applied Science and Engineering
- Vol. 3 (2) , 99-106
Open AccessMagnetic Susceptibility of Pumice in the Area Around Mount Singgalang, West Sumatra
Mount Singgalang is a volcano that has erupted after 1600. Several types of volcanic rocks found around the Mount Singgalang area are Basalt, Andesite, Tuff Breccia, Lava Breccia, and Pumice tuff. Where, andesite and tuff pumice Mount Singgalang originated from the maninjau eruption. Pumice has several minerals, namely cristobalite, feldspar, quartz, obsidian, cristobalite, and tridymite. Pumice has one of the magnetic minerals, namely hematite (Fe2O3), but it is not known how much magnetic mineral content in it. This study aims to determine the abundance of magnetic minerals (magnetic susceptibility) in pumice around Mount Singgalang, West Sumatra. The method used is the rock magnetism method, where this method can investigate the magnetic properties of a material. The instrument used is the Bartington Magnetic Susceptibility Meter. The magnetic susceptibility value of Pumice (Pumice) in the area around Mount Singgalang, West Sumatra, where is the abundance of magnetic minerals in Pumice Rock TDK 20-02 > TDK 20-03 > TDK 20-10. The TDK 20-02 sample has a lot of superparamagnetic grains due to its low susceptibility value and high-Frequency Dependent Susceptibility, while the TDK 20-10 sample has little or almost no superparamagnetic grains due to the high susceptibility value and low-Frequency Dependent Susceptibility.
- Open Access
- 25 November 2025
- Published by Universitas Mataram in Jurnal Penelitian Pendidikan IPA
- Vol. 11 (11) , 35-44
Integration of Edupark and Digital Technology: Analysis of the Need for a Physics Learning Website to Address Misconceptions
The integration of digital technology with a contextual learning approach is a strategic solution to improve conceptual understanding and reduce misconceptions in physics learning. This study aims to analyze the need for developing website-based learning media that integrates the concept of edupark as a contextual approach. The method used in this needs analysis employs the EDUPARK development model, limited to the EDU stage. Data collection instruments include the EDUPARK potential format, physics concept observation sheets at the EDUPARK, questionnaires, interview sheets, and curriculum reviews at SMAN 4 Padang. The results of the Edupark Finding stage identified the Lumindai Stone Forest tourist attraction. The Direct Observation stage revealed that the physics concepts present at the edupark location include gravity and equilibrium, thermodynamics, sound and light waves, and energy. Finally, the Understanding of Teacher, Students, and Curriculum Characteristics stage revealed that students experienced high levels of misconceptions due to the lack of interactive and contextual media, as well as the suboptimal utilization of local potential (edupark). To address these issues, the integrated edupark learning website is viewed as an innovative solution to support the Merdeka Curriculum and enhance the quality of physics education.
- 25 November 2025
- Published by Universitas Mataram in Jurnal Penelitian Pendidikan IPA
- Vol. 11 (11) , 35-44
Open AccessIntegration of Edupark and Digital Technology: Analysis of the Need for a Physics Learning Website to Address Misconceptions
The integration of digital technology with a contextual learning approach is a strategic solution to improve conceptual understanding and reduce misconceptions in physics learning. This study aims to analyze the need for developing website-based learning media that integrates the concept of edupark as a contextual approach. The method used in this needs analysis employs the EDUPARK development model, limited to the EDU stage. Data collection instruments include the EDUPARK potential format, physics concept observation sheets at the EDUPARK, questionnaires, interview sheets, and curriculum reviews at SMAN 4 Padang. The results of the Edupark Finding stage identified the Lumindai Stone Forest tourist attraction. The Direct Observation stage revealed that the physics concepts present at the edupark location include gravity and equilibrium, thermodynamics, sound and light waves, and energy. Finally, the Understanding of Teacher, Students, and Curriculum Characteristics stage revealed that students experienced high levels of misconceptions due to the lack of interactive and contextual media, as well as the suboptimal utilization of local potential (edupark). To address these issues, the integrated edupark learning website is viewed as an innovative solution to support the Merdeka Curriculum and enhance the quality of physics education.
- Open Access
- 28 July 2025
- Published by Lembaga Intelektual Muda Maluku in Indo-MathEdu Intellectuals Journal
- Vol. 6 (5) , 7689-7701
Integrasi Tahap Edu dalam Pengembangan Modul Pembelajaran Fisika Edupark Meer Von Kandi Berbasis Problem Based Learning (PBL)
Edupark is an educational park concept that combines educational and recreational elements in a contextual and enjoyable learning environment. Meer Von Kandi was selected as the location for developing a physics learning module due to its rich potential for physics concepts, strategic location, and the fact that it has not been previously used as a research object. Attractions at this site such as a water slide, tipping bucket, and a replica of a Dutch windmill contain various physics concepts including work and energy, motion kinematics, force, and rotational dynamics. This study uses the EDUPARK development model, which consists of seven stages, focusing on the first three stages, namely EDU: Edupark Finding, Direct Observation, and Understanding of Teacher, Student, and Curriculum Characteristics. Data were collected through direct observation, teacher interviews, and student questionnaires. The results indicate that most students have a dominant visual learning style, yet their recognition of physics concepts in the tourist site remains low. These findings serve as a fundamental basis for designing a contextual physics learning module based on Problem Based Learning (PBL), which is relevant to the surrounding environment and can enhance students’ interest and understanding in learning physics.
- 28 July 2025
- Published by Lembaga Intelektual Muda Maluku in Indo-MathEdu Intellectuals Journal
- Vol. 6 (5) , 7689-7701
Open AccessIntegrasi Tahap Edu dalam Pengembangan Modul Pembelajaran Fisika Edupark Meer Von Kandi Berbasis Problem Based Learning (PBL)
Edupark is an educational park concept that combines educational and recreational elements in a contextual and enjoyable learning environment. Meer Von Kandi was selected as the location for developing a physics learning module due to its rich potential for physics concepts, strategic location, and the fact that it has not been previously used as a research object. Attractions at this site such as a water slide, tipping bucket, and a replica of a Dutch windmill contain various physics concepts including work and energy, motion kinematics, force, and rotational dynamics. This study uses the EDUPARK development model, which consists of seven stages, focusing on the first three stages, namely EDU: Edupark Finding, Direct Observation, and Understanding of Teacher, Student, and Curriculum Characteristics. Data were collected through direct observation, teacher interviews, and student questionnaires. The results indicate that most students have a dominant visual learning style, yet their recognition of physics concepts in the tourist site remains low. These findings serve as a fundamental basis for designing a contextual physics learning module based on Problem Based Learning (PBL), which is relevant to the surrounding environment and can enhance students’ interest and understanding in learning physics.
- Open Access
- 4 April 2025
- Published by Springer Nature in Bulletin of Volcanology
- Vol. 87 (5) , 1-24
A late Pleistocene-Holocene record of explosive eruptions from central Sumatra (Indonesia) in the western Sunda volcanic arc
The island of Sumatra within the Indonesian archipelago is home to over 130 active or potentially active volcanoes with a history of explosive eruptions. Highly explosive eruptions with volcanic explosivity index (VEI) ≥ 6 in Sumatra, such as those originating from the massive Toba caldera, have been well-documented in the literature. However, moderately explosive eruptions with VEI 3–5 have received inadequate attention due to their limited preservation within the proximal stratigraphic record. This gap in knowledge hinders existing attempts to conduct hazard assessments for these potentially impactful eruptions. In this study, we address this knowledge gap by presenting a combination of geochemical, geochronological and tephrochronological datasets associated with distal tephra layers sampled from deep-sea cores collected off the coast of West Sumatra, as well as proximal pyroclastic deposits throughout central Sumatra. Our datasets reveal geochemical and stratigraphic correlations between seven distal tephra layers and their proximal sources, allowing for the quantification of their eruption ages and volumes. Notably, we identified the ~ 1.53 ka Lubuk King Tephra (LKT) eruption from Malintang volcano that discharged ≥ 1.4 km3 dense-rock equivalent (DRE) of magma, representing the youngest known VEI 5 eruption in Sumatra. In addition, we determined Tandikat volcano as the proximal source for a pair of temporally proximate (~ 580 yr apart) VEI 5 eruptions (Tandikat II and I Tephra, TDK II and I; ~ 4.36 and ~ 4.94 ka) that produced ≥ 1.1 and ≥ 2.7 km3 DRE of magma, respectively. We also ascertained that at least two VEI 4 eruptions occurring within the last ~ 36 kyr can be correlated to the active Marapi volcano. Furthermore, we traced distal tephra layers AB4 (~ 36.8 ka) and AB5 (~ 41.0 ka) to two distinct VEI ≥ 5 eruptions at volcanic centres in neighbouring provinces (Ranau Tuff, RAN from South Sumatra; Djudjun Tephra, DJT from Jambi). Volcanic source provenances for another six distal tephra layers remain unknown due to the lack of known proximal correlatives. Overall, our study provides an improved tephrochronological framework for late Pleistocene-Holocene explosive volcanism in central Sumatra that will help refine existing volcanic hazard assessments and enhance the integration of terrestrial and marine palaeoenvironmental archives regionally.
- 4 April 2025
- Published by Springer Nature in Bulletin of Volcanology
- Vol. 87 (5) , 1-24
Open AccessA late Pleistocene-Holocene record of explosive eruptions from central Sumatra (Indonesia) in the western Sunda volcanic arc
The island of Sumatra within the Indonesian archipelago is home to over 130 active or potentially active volcanoes with a history of explosive eruptions. Highly explosive eruptions with volcanic explosivity index (VEI) ≥ 6 in Sumatra, such as those originating from the massive Toba caldera, have been well-documented in the literature. However, moderately explosive eruptions with VEI 3–5 have received inadequate attention due to their limited preservation within the proximal stratigraphic record. This gap in knowledge hinders existing attempts to conduct hazard assessments for these potentially impactful eruptions. In this study, we address this knowledge gap by presenting a combination of geochemical, geochronological and tephrochronological datasets associated with distal tephra layers sampled from deep-sea cores collected off the coast of West Sumatra, as well as proximal pyroclastic deposits throughout central Sumatra. Our datasets reveal geochemical and stratigraphic correlations between seven distal tephra layers and their proximal sources, allowing for the quantification of their eruption ages and volumes. Notably, we identified the ~ 1.53 ka Lubuk King Tephra (LKT) eruption from Malintang volcano that discharged ≥ 1.4 km3 dense-rock equivalent (DRE) of magma, representing the youngest known VEI 5 eruption in Sumatra. In addition, we determined Tandikat volcano as the proximal source for a pair of temporally proximate (~ 580 yr apart) VEI 5 eruptions (Tandikat II and I Tephra, TDK II and I; ~ 4.36 and ~ 4.94 ka) that produced ≥ 1.1 and ≥ 2.7 km3 DRE of magma, respectively. We also ascertained that at least two VEI 4 eruptions occurring within the last ~ 36 kyr can be correlated to the active Marapi volcano. Furthermore, we traced distal tephra layers AB4 (~ 36.8 ka) and AB5 (~ 41.0 ka) to two distinct VEI ≥ 5 eruptions at volcanic centres in neighbouring provinces (Ranau Tuff, RAN from South Sumatra; Djudjun Tephra, DJT from Jambi). Volcanic source provenances for another six distal tephra layers remain unknown due to the lack of known proximal correlatives. Overall, our study provides an improved tephrochronological framework for late Pleistocene-Holocene explosive volcanism in central Sumatra that will help refine existing volcanic hazard assessments and enhance the integration of terrestrial and marine palaeoenvironmental archives regionally.
- Open Access
- 30 July 2024
- Published by Pusat Survei Geologi in Jurnal Geologi dan Sumberdaya Mineral
- Vol. 25 (3) , 193-203
Characteristics of the Density and Magnetic Susceptibility of Pumice from the Maninjau Caldera-Forming Eruption, Indonesia
Abtract- Lake Maninjau is a volcanic caldera formed by a volcanic eruption located in West Sumatra. This volcanic eruption threw pyroclastic materials, one of which is pumice, as far as ± 75 km from the center of the eruption. This study aims to determine density and magnetic susceptibility characteristics of pumice from maninjau caldera-forming eruptions, indonesia. The method used is the rock-magnetic method. It is used to measure magnetic susceptibility based on the distribution of volcanic material. The samples were selected from 3 different locations around Mount Maninjau with distances varying between ±12-32 km. A Bartington Magnetic Susceptibility Metre Type B (MS2B) instrument was utilised to determine the susceptibility of rocks and X-ray fluorescence (XRF) to identify rock element levels. The results of the data analysis obtained have magnetic density and susceptibility values in the NGS (Ngarai Sianok) area, which ranged from 0.67-1.77×103 kg/m3 and 4.4-826×10-8m3/kg, the LBS (Lubuk Basung) area which ranged of 0.74-1.34×103 kg/m3 and 6.6-625.4×10-8m3/kg, and the PRM (Pariaman) area, which ranged from 0.68-3.63×103 kg/m3 and 8-359×10-8m3/kg. The results showed that when sampling closer to Mount Maninjau, the pumice is characterized by dense, fresh, but very small pore size and dominated by slightly greyish white pumice with few white crystals on its surface. Therefore, the location of the pumice from Mount Maninjau has a significant influence on its characteristics, including density, magnetic susceptibility, and iron (Fe) and titanium (Ti) content. Keywords: Pumice, Density, Magnetic Susceptibility, Mount Maninjau, XRF
- 30 July 2024
- Published by Pusat Survei Geologi in Jurnal Geologi dan Sumberdaya Mineral
- Vol. 25 (3) , 193-203
Open AccessCharacteristics of the Density and Magnetic Susceptibility of Pumice from the Maninjau Caldera-Forming Eruption, Indonesia
Abtract- Lake Maninjau is a volcanic caldera formed by a volcanic eruption located in West Sumatra. This volcanic eruption threw pyroclastic materials, one of which is pumice, as far as ± 75 km from the center of the eruption. This study aims to determine density and magnetic susceptibility characteristics of pumice from maninjau caldera-forming eruptions, indonesia. The method used is the rock-magnetic method. It is used to measure magnetic susceptibility based on the distribution of volcanic material. The samples were selected from 3 different locations around Mount Maninjau with distances varying between ±12-32 km. A Bartington Magnetic Susceptibility Metre Type B (MS2B) instrument was utilised to determine the susceptibility of rocks and X-ray fluorescence (XRF) to identify rock element levels. The results of the data analysis obtained have magnetic density and susceptibility values in the NGS (Ngarai Sianok) area, which ranged from 0.67-1.77×103 kg/m3 and 4.4-826×10-8m3/kg, the LBS (Lubuk Basung) area which ranged of 0.74-1.34×103 kg/m3 and 6.6-625.4×10-8m3/kg, and the PRM (Pariaman) area, which ranged from 0.68-3.63×103 kg/m3 and 8-359×10-8m3/kg. The results showed that when sampling closer to Mount Maninjau, the pumice is characterized by dense, fresh, but very small pore size and dominated by slightly greyish white pumice with few white crystals on its surface. Therefore, the location of the pumice from Mount Maninjau has a significant influence on its characteristics, including density, magnetic susceptibility, and iron (Fe) and titanium (Ti) content. Keywords: Pumice, Density, Magnetic Susceptibility, Mount Maninjau, XRF
- Open Access
- 26 December 2023
- Published by Universitas Negeri Padang in Physics Learning and Education
- Vol. 1 (4) , 248-258
Preliminary Analysis of the Physics Enrichment Book Design-Edupark Hot Waterboom Solok Selatan Integrated Inquiry Learning Model
Hot Waterboom Solok Selatan is one of the tourist destinations that is often visited by people on vacation. However, visits to these attractions are only for traveling, taking pictures, and playing. They do not realize that tourist attractions can also be used as learning resources. This study aims to determine the needs of teaching materials that are in accordance with the background of students and their environment. This research is a preliminary study of the research and development method using the Plomp model, which consists of student analysis, teacher analysis, and analysis of physics concepts. The data in this study were obtained from the results of needs analysis through interviews with two physics teachers and 38 students at SMAN 3 Solok Selatan. The results obtained from the students' environment, there is a tourist attraction, namely Hot Waterboom Solok Selatan. After direct observation to the tourist attraction, many physics concepts were found. From the results of the learning style questionnaire, students are more dominant visual learning style, so suitable teaching materials in the form of print media such as books. From the results of teacher interviews, the teaching materials used have not been integrated with eduparks and have not been equipped with learning models. The inquiry learning model is a model that is in accordance with the independent curriculum because learning is student centered and involves students actively discovering concepts. Based on the curriculum analysis, it is found that the physics materials on tourist attractions are not ordered, so the type of book that is suitable is an enrichment book. Enrichment book is a flexible type of book because it does not depend on the curriculum. It can be concluded that it is necessary to design a physics edupark enrichment book Hot Waterboom Solok Selatan integrated Inquiry Learning model for senior high school students.
- 26 December 2023
- Published by Universitas Negeri Padang in Physics Learning and Education
- Vol. 1 (4) , 248-258
Open AccessPreliminary Analysis of the Physics Enrichment Book Design-Edupark Hot Waterboom Solok Selatan Integrated Inquiry Learning Model
Hot Waterboom Solok Selatan is one of the tourist destinations that is often visited by people on vacation. However, visits to these attractions are only for traveling, taking pictures, and playing. They do not realize that tourist attractions can also be used as learning resources. This study aims to determine the needs of teaching materials that are in accordance with the background of students and their environment. This research is a preliminary study of the research and development method using the Plomp model, which consists of student analysis, teacher analysis, and analysis of physics concepts. The data in this study were obtained from the results of needs analysis through interviews with two physics teachers and 38 students at SMAN 3 Solok Selatan. The results obtained from the students' environment, there is a tourist attraction, namely Hot Waterboom Solok Selatan. After direct observation to the tourist attraction, many physics concepts were found. From the results of the learning style questionnaire, students are more dominant visual learning style, so suitable teaching materials in the form of print media such as books. From the results of teacher interviews, the teaching materials used have not been integrated with eduparks and have not been equipped with learning models. The inquiry learning model is a model that is in accordance with the independent curriculum because learning is student centered and involves students actively discovering concepts. Based on the curriculum analysis, it is found that the physics materials on tourist attractions are not ordered, so the type of book that is suitable is an enrichment book. Enrichment book is a flexible type of book because it does not depend on the curriculum. It can be concluded that it is necessary to design a physics edupark enrichment book Hot Waterboom Solok Selatan integrated Inquiry Learning model for senior high school students.
- Open Access
- 1 August 2023
- Published by STIT Palapa Nusantara Lombok NTB in MANAZHIM
- Vol. 5 (2) , 945-956
Magnetic Susceptibility of Pumice at Mount Singgalang, West Sumatera
Volcanic activity produces eruptions that release pyroclastic material at the time of the explosion. Mount Singgalang is a volcano that has experienced an eruption after 1600. Several types of volcanic rocks around the Mount Singgalang area are Basalt, Andesite, Tuff Breccia, Lava Breccia, and Pumice Tuff. Pumice is formed when saturated liquid magma gas bursts like a carbonated beverage and soon cools, causing the froth that results to solidify into a glass full of gas bubbles. Some minerals contained in pumice are obsidian, cristobalite, feldspar, and tridymite. Pumice contains magnetic minerals, namely ilmenite (FeTiO3), and magnetite (Fe3O4). The purpose of this study is to quantify the magnetic susceptibility and quantity of pumice on Mount Singgalang in West Sumatera. When utilizing the Bartington Magnetic Susceptibility Meter to analyze a sample, magnetic susceptibility parameters are utilized to pinpoint the features of a magnetic rock mineral. The value of the magnetic susceptibility of pumice on Mount Singgalang, in West Sumatera has a value that varies between 2763.3 x 10-8m3/kg - 2192.1 x 10-8m3/kg. The results showed that the tested samples had antiferromagnetic magnetic mineral properties with frequency-dependent susceptibility values (χfd), indicating that all of the measured samples contained almost no superparamagnetic (SP) grains and were generally dominated by multi-domain (MD) grains.
- 1 August 2023
- Published by STIT Palapa Nusantara Lombok NTB in MANAZHIM
- Vol. 5 (2) , 945-956
Open AccessMagnetic Susceptibility of Pumice at Mount Singgalang, West Sumatera
Volcanic activity produces eruptions that release pyroclastic material at the time of the explosion. Mount Singgalang is a volcano that has experienced an eruption after 1600. Several types of volcanic rocks around the Mount Singgalang area are Basalt, Andesite, Tuff Breccia, Lava Breccia, and Pumice Tuff. Pumice is formed when saturated liquid magma gas bursts like a carbonated beverage and soon cools, causing the froth that results to solidify into a glass full of gas bubbles. Some minerals contained in pumice are obsidian, cristobalite, feldspar, and tridymite. Pumice contains magnetic minerals, namely ilmenite (FeTiO3), and magnetite (Fe3O4). The purpose of this study is to quantify the magnetic susceptibility and quantity of pumice on Mount Singgalang in West Sumatera. When utilizing the Bartington Magnetic Susceptibility Meter to analyze a sample, magnetic susceptibility parameters are utilized to pinpoint the features of a magnetic rock mineral. The value of the magnetic susceptibility of pumice on Mount Singgalang, in West Sumatera has a value that varies between 2763.3 x 10-8m3/kg - 2192.1 x 10-8m3/kg. The results showed that the tested samples had antiferromagnetic magnetic mineral properties with frequency-dependent susceptibility values (χfd), indicating that all of the measured samples contained almost no superparamagnetic (SP) grains and were generally dominated by multi-domain (MD) grains.
- Open Access
- 30 April 2023
- Published by Universitas Mataram in Jurnal Penelitian Pendidikan IPA
- Vol. 9 (4) , 2135-2143
Preliminary Analysis of Enrichment Media Based on Physics Edupark in Cave Tourism Destination
This research is a preliminary research that aims to analyze the needs in developing enrichment media based on edupark physics in cave tourism destinations. The type of research used is the research and development using the Plomp model. This research is only a preliminary research phase which consists of teacher analysis, student analysis, and potential material analysis. The data used in this study were obtained from interviews and questionnaires given to physics teacher and 68 students from class X which is combined from SMAN 1 Lareh Sago Halaban and SMAN 2 Sijunjung students. Based on this preliminary research, the results show that media in video form has advantages for: motivating students to learn, showing physical phenomena as a whole, helping to develop student’s knowledge and skills, and helping students master the physics material. Besides that, cave tourism activities can be used as a physics edupark and as an object in developing physics edupark enrichment media in the form of videos because they have many connections with physics concepts. It can be concluded that multimedia interactive in the form of video is the most suitable learning media to be used as an enrichment media based on physics edupark.
- 30 April 2023
- Published by Universitas Mataram in Jurnal Penelitian Pendidikan IPA
- Vol. 9 (4) , 2135-2143
Open AccessPreliminary Analysis of Enrichment Media Based on Physics Edupark in Cave Tourism Destination
This research is a preliminary research that aims to analyze the needs in developing enrichment media based on edupark physics in cave tourism destinations. The type of research used is the research and development using the Plomp model. This research is only a preliminary research phase which consists of teacher analysis, student analysis, and potential material analysis. The data used in this study were obtained from interviews and questionnaires given to physics teacher and 68 students from class X which is combined from SMAN 1 Lareh Sago Halaban and SMAN 2 Sijunjung students. Based on this preliminary research, the results show that media in video form has advantages for: motivating students to learn, showing physical phenomena as a whole, helping to develop student’s knowledge and skills, and helping students master the physics material. Besides that, cave tourism activities can be used as a physics edupark and as an object in developing physics edupark enrichment media in the form of videos because they have many connections with physics concepts. It can be concluded that multimedia interactive in the form of video is the most suitable learning media to be used as an enrichment media based on physics edupark.
- Open Access
- 28 May 2022
- Published by Universitas Negeri Semarang in Jurnal Fisika
- Vol. 12 (1) , 9-15
Identification of Clay Element Content in Fabric Dyeing Process Using X-Ray Fluorescence Spectrometry
Clay in West Sumatra has been used as a natural dye for batik, so the batik is known as clay batik. The dyeing of the cloth is done by boiling and soaking the clay together with the cloth for 10 days. The color of the fabric is caused by certain elements present in the clay. Currently, no one has investigated the changes in elemental content due to the dyeing process. This research aims to investigate the changes in the concentration of the elements that affect the color of the fabric. Samples were taken from 4 areas, namely Solok, Sijunjung, Lima Puluh Kota, and Pesisir Selatan with a total of 8 samples, of which 4 samples were measured before the staining process and 4 more samples after the staining process. Changes in the elemental content of clay were investigated using X-Ray Fluorescence (XRF). The results of the study showed changes in the content of the dominant element, namely Al, Si, and Fe contained in samples CL-PYKLN 2A and CL-TJG GDG 210422. While the samples CL-PSB-SJJ 210421 and CL-SPPS 1 210314 the change in the concentration of the elemental content was not too significant. The elements that cause colored cloth are all elements in clay, but the dominant element in coloring cloth is Fe.
- 28 May 2022
- Published by Universitas Negeri Semarang in Jurnal Fisika
- Vol. 12 (1) , 9-15
Open AccessIdentification of Clay Element Content in Fabric Dyeing Process Using X-Ray Fluorescence Spectrometry
Clay in West Sumatra has been used as a natural dye for batik, so the batik is known as clay batik. The dyeing of the cloth is done by boiling and soaking the clay together with the cloth for 10 days. The color of the fabric is caused by certain elements present in the clay. Currently, no one has investigated the changes in elemental content due to the dyeing process. This research aims to investigate the changes in the concentration of the elements that affect the color of the fabric. Samples were taken from 4 areas, namely Solok, Sijunjung, Lima Puluh Kota, and Pesisir Selatan with a total of 8 samples, of which 4 samples were measured before the staining process and 4 more samples after the staining process. Changes in the elemental content of clay were investigated using X-Ray Fluorescence (XRF). The results of the study showed changes in the content of the dominant element, namely Al, Si, and Fe contained in samples CL-PYKLN 2A and CL-TJG GDG 210422. While the samples CL-PSB-SJJ 210421 and CL-SPPS 1 210314 the change in the concentration of the elemental content was not too significant. The elements that cause colored cloth are all elements in clay, but the dominant element in coloring cloth is Fe.