Tao Hong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tao Hong has a total of 110 co-authors. Here are the top co-authors by number of shared publications:
- Wen Jiang
Xidian University
27 shared publications Shuxi Gong
National Key Laboratory of Antennas and Microwave Technology, Collaborative Innovation Center of Information Sensing and Understanding, Xidian University, Xian, China
12 shared publications- Peng Wang
Xidian University
9 shared publications - Jiangcheng Ge
Xidian University
8 shared publications - Gert Frolund Pedersen
Aalborg University
7 shared publications - Ming Shen
Aalborg University
7 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (10) , 8779-8795
From Fixed to Arbitrary Frequency: A Scalable LLM-Enhanced Framework for Electromagnetic Device Design
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (10) , 8779-8795
From Fixed to Arbitrary Frequency: A Scalable LLM-Enhanced Framework for Electromagnetic Device Design
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (10) , 9112-9122
An Antenna Array Fault Diagnosis Method: RSNN Detection Based on Quasi-Far-Field Measurements
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (10) , 9112-9122
An Antenna Array Fault Diagnosis Method: RSNN Detection Based on Quasi-Far-Field Measurements
- 31 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (6) , 4884-4895
Angular-Domain Control of Electromagnetic Waves Through Scattering Manipulation
This article addresses two primordial questions concerning angularly dispersive periodic structures. First, how does the scattering response govern electromagnetic functionality at specific angles? Second, under what conditions can perfect transmission, reflection, or absorption be achieved at given angles? To this end, a unified framework is proposed to systematically integrate angular-selective transmission, reflection, and absorption. By decomposing the total scattered field into independently controllable antenna mode scattered field (AM-SF) and structural mode scattered field (SM-SF), the framework establishes a systematic link between scattering characteristics and electromagnetic functionality. This approach offers a clear physical foundation for angular manipulation of electromagnetic waves. The proposed framework is validated through simulations of three types of angle-selective surfaces (ASSs), namely, reflection–absorption (RA), transmission–reflection (TR), and transmission–absorption (TA). Experimental measurements are further carried out for TM-polarized TR-ASS and TA-ASS, along with a dual-polarized TA-ASS. These results confirm the effectiveness of the proposed method and demonstrate a scalable design framework for diverse angular-domain filtering functionalities in RF front-ends.
- 31 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (6) , 4884-4895
Angular-Domain Control of Electromagnetic Waves Through Scattering Manipulation
This article addresses two primordial questions concerning angularly dispersive periodic structures. First, how does the scattering response govern electromagnetic functionality at specific angles? Second, under what conditions can perfect transmission, reflection, or absorption be achieved at given angles? To this end, a unified framework is proposed to systematically integrate angular-selective transmission, reflection, and absorption. By decomposing the total scattered field into independently controllable antenna mode scattered field (AM-SF) and structural mode scattered field (SM-SF), the framework establishes a systematic link between scattering characteristics and electromagnetic functionality. This approach offers a clear physical foundation for angular manipulation of electromagnetic waves. The proposed framework is validated through simulations of three types of angle-selective surfaces (ASSs), namely, reflection–absorption (RA), transmission–reflection (TR), and transmission–absorption (TA). Experimental measurements are further carried out for TM-polarized TR-ASS and TA-ASS, along with a dual-polarized TA-ASS. These results confirm the effectiveness of the proposed method and demonstrate a scalable design framework for diverse angular-domain filtering functionalities in RF front-ends.
- 28 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (4) , 1527-1531
A Scattering Physics-Driven Network for Damage Detection of Scattering Targets
Diagnosing damage of scattering targets with multiple fault sources is highly challenging, mainly because scattering-source reconstruction is ill-posed, insufficient precision and inadequate physical interpretability. To address this challenge, a scattering physics-driven two-stage network (SP-TN) is proposed for target damage detection. The core novelty involves: by employing the mapping relationship in SAR imaging, a physics-driven solution for inverse scattering problems is established; integrated with physical constraints on location and structure, the underlying physical rules of damage manifestations are traced, enabling the precise scattering diagnosis. The damage detection datasets containing 1856 high quality SAR images have been constructed to study the effects of single-point damage and multiple-point damage on feature extraction and model detection accuracy. The scattering target testing and ablation experiments demonstrate that the SP-TN achieved high-precision localization, classification, and scattering entropy analysis for single-point and multiple-point scattering damage faults with 0.92 precision, providing a novel approach for scattering damage diagnosis.
- 28 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (4) , 1527-1531
A Scattering Physics-Driven Network for Damage Detection of Scattering Targets
Diagnosing damage of scattering targets with multiple fault sources is highly challenging, mainly because scattering-source reconstruction is ill-posed, insufficient precision and inadequate physical interpretability. To address this challenge, a scattering physics-driven two-stage network (SP-TN) is proposed for target damage detection. The core novelty involves: by employing the mapping relationship in SAR imaging, a physics-driven solution for inverse scattering problems is established; integrated with physical constraints on location and structure, the underlying physical rules of damage manifestations are traced, enabling the precise scattering diagnosis. The damage detection datasets containing 1856 high quality SAR images have been constructed to study the effects of single-point damage and multiple-point damage on feature extraction and model detection accuracy. The scattering target testing and ablation experiments demonstrate that the SP-TN achieved high-precision localization, classification, and scattering entropy analysis for single-point and multiple-point scattering damage faults with 0.92 precision, providing a novel approach for scattering damage diagnosis.
- 20 January 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (2) , 2498-2515
Time-modulated metasurfaces with both amplitude and phase control ability at carrier frequency
Although time-modulated metasurfaces (TMMS) possess flexible beam manipulation capability, they often operate at harmonic frequencies, which weakens their practicality. To solve this problem, a method enabling TMMS to achieve beam-forming at the carrier frequency is proposed and investigated. Specifically, the phase is controlled by a reconfigurable metasurface (MS), and additional time modulation (TM) amplitude excitation is introduced by utilizing an anti-phase modulation time sequence (APMTS) to achieve complete control of the reflection coefficient for each element. The working principle is elaborated in detail, and the effectiveness of the proposed method is verified by theoretical analysis. As a proof of concept, experimental validation is then carried out using a 10 × 10 1-bit TMMS prototype. The theoretical and experimental results show that the proposed method can enable the 1-bit TMMS to have the capability of controlling the amplitude and phase independently and simultaneously at the carrier frequency. Furthermore, this paper introduces, for the first time, a rigorous efficiency definition for TMMS, followed by an accurate efficiency analysis that demonstrates the proposed method achieves higher TM efficiency in beam-forming compared to conventional methods. Benefiting from the physical perspective analysis, the proposed method is clear in principle, simple in structure, and easy to implement. It may have potential applications in wireless communications, target sensing, and radar systems.
- 20 January 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (2) , 2498-2515
Time-modulated metasurfaces with both amplitude and phase control ability at carrier frequency
Although time-modulated metasurfaces (TMMS) possess flexible beam manipulation capability, they often operate at harmonic frequencies, which weakens their practicality. To solve this problem, a method enabling TMMS to achieve beam-forming at the carrier frequency is proposed and investigated. Specifically, the phase is controlled by a reconfigurable metasurface (MS), and additional time modulation (TM) amplitude excitation is introduced by utilizing an anti-phase modulation time sequence (APMTS) to achieve complete control of the reflection coefficient for each element. The working principle is elaborated in detail, and the effectiveness of the proposed method is verified by theoretical analysis. As a proof of concept, experimental validation is then carried out using a 10 × 10 1-bit TMMS prototype. The theoretical and experimental results show that the proposed method can enable the 1-bit TMMS to have the capability of controlling the amplitude and phase independently and simultaneously at the carrier frequency. Furthermore, this paper introduces, for the first time, a rigorous efficiency definition for TMMS, followed by an accurate efficiency analysis that demonstrates the proposed method achieves higher TM efficiency in beam-forming compared to conventional methods. Benefiting from the physical perspective analysis, the proposed method is clear in principle, simple in structure, and easy to implement. It may have potential applications in wireless communications, target sensing, and radar systems.
- 14 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (3) , 1324-1328
An Ultrawideband 1-Bit Reconfigurable Reflectarray Element With Improved Angular Stability
In this paper, a 1-bit ultra-wideband reconfigurable reflectarray (RRA) element with improved angular stability is proposed. Based on the magneto-electric (ME) dipole, a novel central-patch probe structure is introduced, wherein two diodes are connected to opposite sides of the probe to control the two resonant modes. This configuration yields a fully symmetric RRA element, which balances and stabilizes the current distributions associated with both resonant modes, thereby enabling an ultra-wideband 1-bit phase response. Furthermore, rows of metallic vias are incorporated on both sides of the element to enhance the angular stability of the 1-bit phase bandwidth. Consequently, the proposed RRA element achieves a 1-bit relative phase bandwidth of 58% (8.97-16.44 GHz) and maintains this bandwidth at 33% for oblique incidence angles up to 50°. To experimentally validate the design, a 1×2 elements prototype was fabricated and characterized using the rectangular waveguide (RWG) method. The measured results exhibit good agreement with the simulations, thereby verifying the ultra-wideband performance of the proposed element. System-level simulations of a 16×16 array confirm that the proposed element significantly enhances the gain bandwidth and wide-angle scanning performances. These characteristics make the proposed RRA element a strong candidate for future radar, satellite communication, and reconfigurable intelligent surface (RIS) applications.
- 14 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (3) , 1324-1328
An Ultrawideband 1-Bit Reconfigurable Reflectarray Element With Improved Angular Stability
In this paper, a 1-bit ultra-wideband reconfigurable reflectarray (RRA) element with improved angular stability is proposed. Based on the magneto-electric (ME) dipole, a novel central-patch probe structure is introduced, wherein two diodes are connected to opposite sides of the probe to control the two resonant modes. This configuration yields a fully symmetric RRA element, which balances and stabilizes the current distributions associated with both resonant modes, thereby enabling an ultra-wideband 1-bit phase response. Furthermore, rows of metallic vias are incorporated on both sides of the element to enhance the angular stability of the 1-bit phase bandwidth. Consequently, the proposed RRA element achieves a 1-bit relative phase bandwidth of 58% (8.97-16.44 GHz) and maintains this bandwidth at 33% for oblique incidence angles up to 50°. To experimentally validate the design, a 1×2 elements prototype was fabricated and characterized using the rectangular waveguide (RWG) method. The measured results exhibit good agreement with the simulations, thereby verifying the ultra-wideband performance of the proposed element. System-level simulations of a 16×16 array confirm that the proposed element significantly enhances the gain bandwidth and wide-angle scanning performances. These characteristics make the proposed RRA element a strong candidate for future radar, satellite communication, and reconfigurable intelligent surface (RIS) applications.
- 19 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (2) , 2167-2172
The Gradual Interval Mapping Method Integration Framework for Multiple Metasurfaces Fast Design
This work presents a gradual interval mapping method (IMM) integration framework for the rapid design of multiple metasurfaces. By leveraging the deep neural networks, the gradual design framework efficiently predicts both S-parameters and geometric structures using interval folding lines as input. Unlike traditional and current approaches, the proposed method integrates IMM with a filling strategy, simplifying data processing and enhancing prediction accuracy. To validate its effectiveness, three types of frequency selective surface (FSS) are designed, one of which is fabricated and experimentally measured in a microwave chamber. Simulation and measurement results confirm the superior performance of the framework, highlighting its potential for intelligent electromagnetic device design. Finally, we conclude with a short discussion of the work, including its limitations and developability.
- 19 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (2) , 2167-2172
The Gradual Interval Mapping Method Integration Framework for Multiple Metasurfaces Fast Design
This work presents a gradual interval mapping method (IMM) integration framework for the rapid design of multiple metasurfaces. By leveraging the deep neural networks, the gradual design framework efficiently predicts both S-parameters and geometric structures using interval folding lines as input. Unlike traditional and current approaches, the proposed method integrates IMM with a filling strategy, simplifying data processing and enhancing prediction accuracy. To validate its effectiveness, three types of frequency selective surface (FSS) are designed, one of which is fabricated and experimentally measured in a microwave chamber. Simulation and measurement results confirm the superior performance of the framework, highlighting its potential for intelligent electromagnetic device design. Finally, we conclude with a short discussion of the work, including its limitations and developability.
- 13 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (2) , 611-615
Broadband 2 GHz to 14 GHz Dual-Polarized Horn Antenna With Stable Unidirectional Radiation Patterns
A broadband dual-polarized quad-ridged horn (QRH) antenna covering 2–14 GHz is proposed for antenna measurements and electromagnetic compatibility (EMC) testing. To achieve dual-port broadband impedance matching, a metallic ring-shaped matching block and two metallic bridges are incorporated into the feeding cavity. Additionally, the ridge profile is optimized using a fourth-order Bezier curve to ensure smooth impedance transitions, while the sidewall structure is shortened to mitigate radiation pattern distortion at high frequencies. As a result of these enhancements, the fabricated antenna prototype exhibits a reflection coefficient below -10 dB, port isolation exceeding 30 dB, a gain ranging from 6.3 to 19.3 dBi, and stable, symmetrical radiation patterns without beam splitting across the entire operating band. Compared with conventional designs, the proposed antenna achieves both broader bandwidth and improved radiation stability, thereby addressing typical pattern distortion in broadband applications.
- 13 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (2) , 611-615
Broadband 2 GHz to 14 GHz Dual-Polarized Horn Antenna With Stable Unidirectional Radiation Patterns
A broadband dual-polarized quad-ridged horn (QRH) antenna covering 2–14 GHz is proposed for antenna measurements and electromagnetic compatibility (EMC) testing. To achieve dual-port broadband impedance matching, a metallic ring-shaped matching block and two metallic bridges are incorporated into the feeding cavity. Additionally, the ridge profile is optimized using a fourth-order Bezier curve to ensure smooth impedance transitions, while the sidewall structure is shortened to mitigate radiation pattern distortion at high frequencies. As a result of these enhancements, the fabricated antenna prototype exhibits a reflection coefficient below -10 dB, port isolation exceeding 30 dB, a gain ranging from 6.3 to 19.3 dBi, and stable, symmetrical radiation patterns without beam splitting across the entire operating band. Compared with conventional designs, the proposed antenna achieves both broader bandwidth and improved radiation stability, thereby addressing typical pattern distortion in broadband applications.