Bing Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bing Sun has a total of 159 co-authors. Here are the top co-authors by number of shared publications:
Wei Xu
31 shared publicationsHongwei Zhu
State Key Laboratory of Chemical Safety
16 shared publicationsChenyang Zhao
State Key Laboratory of Chemical Safety
11 shared publicationsJunjie Feng
State Key Laboratory of Chemical Safety
11 shared publicationsJie Jiang
SINOPEC Research Institute of Safety Engineering Co., Ltd. 339th Songling Road
10 shared publicationsYujia Liu
10 shared publications
Latest Publications
- 24 October 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (43) , 22799-22813
Establishment of Sensitive Indicators and Safe-Operation Domain for Postignition in Ethylene Oxide Fixed-Bed Reactors via Experimental and Kinetic Analysis
In the ethylene(C2H4)-to-ethylene oxide (EO) process, ″postignition″ frequently occurs in the tail section of fixed-bed reactors, leading to emergency shutdowns, irreversible catalyst deactivation, and even fire or explosion accidents, thus posing severe threats to process safety and operational stability. To address this industrial challenge, single-tube fixed-bed reactor experiments with silver catalysts were first performed to screen sensitive indicators for postignition runaway risk in EO production. The concentration evolution of potential warning species was explored under varied temperature conditions. Experimental results show that CO and C3H6 act as reliable sensitive indicators for identifying postignition events, with a distinct concentration inflection occurring within the critical temperature range of 240–250 °C. Species concentrations within this turning-point interval can serve as thresholds for identifying the onset of postignition. These thresholds require adjustment according to the inlet oxygen content. Subsequently, a heated rapid compression machine (RCM) was adopted to measure autoignition temperatures and ignition delay times of C2H4-EO mixtures under diverse compositions and operating conditions in order to obtain the safe-operation window. RCM measurements indicate that the C2H4-EO mixture starts slow oxidation at 475 °C and presents obvious autoignition behavior above 507 °C without catalysts. Elevated oxygen and EO concentrations significantly reduce ignition delay and intensify combustion intensity. CHEMKIN software combined with the modified Aramco-Mech 3.0 mechanism was further applied to simulate high-temperature oxidation pathways of the C2H4-EO system at 500 °C, identifying CO and C3H6 as key byproducts generated during postignition. This work reveals the evolutionary characteristics of postignition in the EO synthesis process. The established sensitive indicator system and safe-operation strategy provide a theoretical basis and technical support for early warning and safety management of industrial-scale EO fixed-bed reactors.
- 24 October 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (43) , 22799-22813
Establishment of Sensitive Indicators and Safe-Operation Domain for Postignition in Ethylene Oxide Fixed-Bed Reactors via Experimental and Kinetic Analysis
In the ethylene(C2H4)-to-ethylene oxide (EO) process, ″postignition″ frequently occurs in the tail section of fixed-bed reactors, leading to emergency shutdowns, irreversible catalyst deactivation, and even fire or explosion accidents, thus posing severe threats to process safety and operational stability. To address this industrial challenge, single-tube fixed-bed reactor experiments with silver catalysts were first performed to screen sensitive indicators for postignition runaway risk in EO production. The concentration evolution of potential warning species was explored under varied temperature conditions. Experimental results show that CO and C3H6 act as reliable sensitive indicators for identifying postignition events, with a distinct concentration inflection occurring within the critical temperature range of 240–250 °C. Species concentrations within this turning-point interval can serve as thresholds for identifying the onset of postignition. These thresholds require adjustment according to the inlet oxygen content. Subsequently, a heated rapid compression machine (RCM) was adopted to measure autoignition temperatures and ignition delay times of C2H4-EO mixtures under diverse compositions and operating conditions in order to obtain the safe-operation window. RCM measurements indicate that the C2H4-EO mixture starts slow oxidation at 475 °C and presents obvious autoignition behavior above 507 °C without catalysts. Elevated oxygen and EO concentrations significantly reduce ignition delay and intensify combustion intensity. CHEMKIN software combined with the modified Aramco-Mech 3.0 mechanism was further applied to simulate high-temperature oxidation pathways of the C2H4-EO system at 500 °C, identifying CO and C3H6 as key byproducts generated during postignition. This work reveals the evolutionary characteristics of postignition in the EO synthesis process. The established sensitive indicator system and safe-operation strategy provide a theoretical basis and technical support for early warning and safety management of industrial-scale EO fixed-bed reactors.
- 22 October 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (43) , 19805-19815
Regulating the Hydrogen Oxidation Reaction Pathway via Pd–Mn x O y Interactions
PdxO species have long been identified as the dominant active phase responsible for catalytic activity, while the exact role of oxidation state is still controversial. Herein, we use MnxOy (MnO, Mn3O4, and MnO2) as supports to reveal the effect of PdxO species in the hydrogen oxidation reaction. At 150 °C, the Pd/Mn3O4 catalyst delivers an O2 conversion of 97.8%, representing a remarkable 2.6 times enhancement relative to Pd/MnO2 (37.7%). Density functional theory (DFT) calculations, together with in situ characterizations, reveal that the activated H* species by the Pd metal undergoes spillover to the Pd–O–Mn active sites, promoting the activation and conversion of O2. More strikingly, OOH* as the intermediate for reaction of O2* species hydrogenation was found on the Pd/MnO2 catalyst, while the more active Pd–O–Mn sites lower the energy barrier toward O–O bond cleavage, enhancing the formation of OH* species on the Pd/Mn3O4 catalyst. Benefiting from the different pathways, an extremely catalytic performance and reactivity is observed on the Pd/Mn3O4 catalyst than on the Pd/MnO2 catalyst. This study enriches the understanding of the hydrogen oxidation pathway and offers clear insights into designing efficient Pd-based catalysts.
- 22 October 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (43) , 19805-19815
Regulating the Hydrogen Oxidation Reaction Pathway via Pd–Mn x O y Interactions
PdxO species have long been identified as the dominant active phase responsible for catalytic activity, while the exact role of oxidation state is still controversial. Herein, we use MnxOy (MnO, Mn3O4, and MnO2) as supports to reveal the effect of PdxO species in the hydrogen oxidation reaction. At 150 °C, the Pd/Mn3O4 catalyst delivers an O2 conversion of 97.8%, representing a remarkable 2.6 times enhancement relative to Pd/MnO2 (37.7%). Density functional theory (DFT) calculations, together with in situ characterizations, reveal that the activated H* species by the Pd metal undergoes spillover to the Pd–O–Mn active sites, promoting the activation and conversion of O2. More strikingly, OOH* as the intermediate for reaction of O2* species hydrogenation was found on the Pd/MnO2 catalyst, while the more active Pd–O–Mn sites lower the energy barrier toward O–O bond cleavage, enhancing the formation of OH* species on the Pd/Mn3O4 catalyst. Benefiting from the different pathways, an extremely catalytic performance and reactivity is observed on the Pd/Mn3O4 catalyst than on the Pd/MnO2 catalyst. This study enriches the understanding of the hydrogen oxidation pathway and offers clear insights into designing efficient Pd-based catalysts.
- 13 October 2026
- Published by Elsevier in Reliability Engineering & System Safety
- Vol. 279
Gas leak source localization in complex environments using a multilevel simulated annealing Bayesian–MCMC framework
- 13 October 2026
- Published by Elsevier in Reliability Engineering & System Safety
- Vol. 279
Gas leak source localization in complex environments using a multilevel simulated annealing Bayesian–MCMC framework
- 29 September 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
Elucidation and Control of the Reaction Network for Efficient Synthesis of Di- tert -amyl Peroxide in Microreactor
Di-tert-amyl peroxide (DTAP) is a class of dialkyl peroxide initiators with high polymerization efficiency. However, its traditional batch synthesis suffers from multiple side reactions with unclear mechanisms, poor interphase mass transfer, and intense heat release, ultimately leading to a low product quality. To address these challenges, a novel synthesis strategy coupled with mechanistic investigation is required to guide the DTAP production. In this work, microreactor technology was employed to elucidate and control the reaction network for the efficient synthesis of DTAP. The complex reaction network of peroxidation was systematically deciphered, leading to the identification of three major classes of impurities, including 2-methyl-2-butene (MB), tert-amyl ethyl ether (TAEE), and the previously unreported compound 2,2-bis(tert-amyloxy)propane (BTAOP). On the basis of these mechanistic insights, advanced control strategies including ex situ temporal extension and in situ feedstock modulation were proposed to further improve the DTAP purity to exceed 96% by precise network steering. The proposed reaction network was further validated by density functional theory (DFT) calculations. The superiority of this paradigm was demonstrated through a systematic comparison with conventional and alternative advanced approaches. Beyond delivering a high-purity product, this work establishes a mechanistically guided process intensification paradigm, offering a transferable framework for organic peroxide synthesis.
- 29 September 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
Elucidation and Control of the Reaction Network for Efficient Synthesis of Di- tert -amyl Peroxide in Microreactor
Di-tert-amyl peroxide (DTAP) is a class of dialkyl peroxide initiators with high polymerization efficiency. However, its traditional batch synthesis suffers from multiple side reactions with unclear mechanisms, poor interphase mass transfer, and intense heat release, ultimately leading to a low product quality. To address these challenges, a novel synthesis strategy coupled with mechanistic investigation is required to guide the DTAP production. In this work, microreactor technology was employed to elucidate and control the reaction network for the efficient synthesis of DTAP. The complex reaction network of peroxidation was systematically deciphered, leading to the identification of three major classes of impurities, including 2-methyl-2-butene (MB), tert-amyl ethyl ether (TAEE), and the previously unreported compound 2,2-bis(tert-amyloxy)propane (BTAOP). On the basis of these mechanistic insights, advanced control strategies including ex situ temporal extension and in situ feedstock modulation were proposed to further improve the DTAP purity to exceed 96% by precise network steering. The proposed reaction network was further validated by density functional theory (DFT) calculations. The superiority of this paradigm was demonstrated through a systematic comparison with conventional and alternative advanced approaches. Beyond delivering a high-purity product, this work establishes a mechanistically guided process intensification paradigm, offering a transferable framework for organic peroxide synthesis.
- Open Access
- 22 September 2026
- Published by Elsevier in SSRN Electronic Journal
Study on the Kinetics of Ethylene Decomposition Induced by Peroxide Initiators and Its Correlation with Initiator Molecular Structure
The decomposition behavior of ethylene induced by seven peroxide initiators under ultra-high pressure was investigated via runaway experiments, product characterization, and DFT calculations. DTBP exhibited the highest activation energy (146.95kJ/mol), longest fluctuation time (83s), and time-to-peak (7.06s), while TBPO showed the lowest activation energy (114.38kJ/mol) and shortest times (52s, 4.78s). A positive correlation between time-to-peak and peak temperature/pressure was established, attributed to sustained energy accumulation. Solid products were uniform carbon microspheres (300-500nm) with graphitic structures; gaseous products were dominated by CH4 (93.10wt%) and H₂ (3.90wt%) at ~3:1, consistent with the β-scission methanation pathway. A Comprehensive Decomposition Induction Index ranked DTBP as most potent and TBPB as most controlled. These findings provide mechanistic insights and practical guidance for safe initiator selection in industrial polyethylene processes.
- 22 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessStudy on the Kinetics of Ethylene Decomposition Induced by Peroxide Initiators and Its Correlation with Initiator Molecular Structure
The decomposition behavior of ethylene induced by seven peroxide initiators under ultra-high pressure was investigated via runaway experiments, product characterization, and DFT calculations. DTBP exhibited the highest activation energy (146.95kJ/mol), longest fluctuation time (83s), and time-to-peak (7.06s), while TBPO showed the lowest activation energy (114.38kJ/mol) and shortest times (52s, 4.78s). A positive correlation between time-to-peak and peak temperature/pressure was established, attributed to sustained energy accumulation. Solid products were uniform carbon microspheres (300-500nm) with graphitic structures; gaseous products were dominated by CH4 (93.10wt%) and H₂ (3.90wt%) at ~3:1, consistent with the β-scission methanation pathway. A Comprehensive Decomposition Induction Index ranked DTBP as most potent and TBPB as most controlled. These findings provide mechanistic insights and practical guidance for safe initiator selection in industrial polyethylene processes.
- 16 September 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (38) , 20639-20651
Solid–Liquid Phase Equilibrium Study of 2,5-Furandicarboxylic Acid in 14 Pure Solvents: Dissolution Mechanism and Solubility Prediction
Although 2,5-furandicarboxylic acid (FDCA) is a key bio-based platform chemical, its solid–liquid phase equilibrium behavior remains insufficiently characterized, limiting rational crystallization process development. Here, FDCA solubility in 14 pure solvents was measured by a dynamic method over 283.15–323.15 K. Molecular simulations were subsequently used to investigate the molecular basis of its dissolution behavior. The results indicate that strong hydrogen-bond acceptor ability, favorable solvation energy, and a small polarity difference promote FDCA dissolution. More importantly, a quality-guided TabPFN workflow for small-sample solubility prediction is proposed, which can predict the solubility of FDCA in unknown solvents with limited data. Compared with three traditional machine-learning models, this workflow demonstrates lower mean squared error (0.03), mean absolute error (0.16), and higher R2 (0.88) on the external validation set. These results provide mechanistic insight and practical guidance for the FDCA crystallization process design.
- 16 September 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (38) , 20639-20651
Solid–Liquid Phase Equilibrium Study of 2,5-Furandicarboxylic Acid in 14 Pure Solvents: Dissolution Mechanism and Solubility Prediction
Although 2,5-furandicarboxylic acid (FDCA) is a key bio-based platform chemical, its solid–liquid phase equilibrium behavior remains insufficiently characterized, limiting rational crystallization process development. Here, FDCA solubility in 14 pure solvents was measured by a dynamic method over 283.15–323.15 K. Molecular simulations were subsequently used to investigate the molecular basis of its dissolution behavior. The results indicate that strong hydrogen-bond acceptor ability, favorable solvation energy, and a small polarity difference promote FDCA dissolution. More importantly, a quality-guided TabPFN workflow for small-sample solubility prediction is proposed, which can predict the solubility of FDCA in unknown solvents with limited data. Compared with three traditional machine-learning models, this workflow demonstrates lower mean squared error (0.03), mean absolute error (0.16), and higher R2 (0.88) on the external validation set. These results provide mechanistic insight and practical guidance for the FDCA crystallization process design.
- 1 July 2026
- Published by Wiley in Chemphyschem
- Vol. 27 (13) , e202500827
Atomistic Insights into the Thermal Decomposition and Runaway Mechanism of Peroxypropionic Acid
Thermal runaway of organic peroxides in chemical production poses a persistent and severe challenge in the field of energy and safety. The ambiguous decomposition mechanism of peroxypropionic acid (PPA), a typical and unstable peroxide, hinders effective risk prevention and control. This study employs a multiscale computational approach integrating reactive molecular dynamics (ReaxFF MD) and density functional theory (DFT) to unravel, for the first time, the complete reaction network and energy evolution pathway of a PPA mixture under thermal runaway conditions at the atomic scale. Simulation results reveal that its decomposition follows a typical free radical chain reaction mechanism, progressing through three self‐accelerating stages: initial homolytic initiation, a vigorous exothermic propagation dominated by hydrogen abstraction reactions, and final secondary decomposition of products driven by accumulated heat. DFT calculations precisely quantified the activation energy barriers and reaction enthalpies of key elementary steps, identifying the rate‐determining steps that drive thermal runaway. Adiabatic experiments validated the intense exothermic characteristics predicted by the simulations. This work clarifies the microscopic driving forces behind PPA thermal runaway, providing crucial molecular‐level insights and thermodynamic data for designing safer operational protocols and developing efficient inhibitors at an industrial scale.
- 1 July 2026
- Published by Wiley in Chemphyschem
- Vol. 27 (13) , e202500827
Atomistic Insights into the Thermal Decomposition and Runaway Mechanism of Peroxypropionic Acid
Thermal runaway of organic peroxides in chemical production poses a persistent and severe challenge in the field of energy and safety. The ambiguous decomposition mechanism of peroxypropionic acid (PPA), a typical and unstable peroxide, hinders effective risk prevention and control. This study employs a multiscale computational approach integrating reactive molecular dynamics (ReaxFF MD) and density functional theory (DFT) to unravel, for the first time, the complete reaction network and energy evolution pathway of a PPA mixture under thermal runaway conditions at the atomic scale. Simulation results reveal that its decomposition follows a typical free radical chain reaction mechanism, progressing through three self‐accelerating stages: initial homolytic initiation, a vigorous exothermic propagation dominated by hydrogen abstraction reactions, and final secondary decomposition of products driven by accumulated heat. DFT calculations precisely quantified the activation energy barriers and reaction enthalpies of key elementary steps, identifying the rate‐determining steps that drive thermal runaway. Adiabatic experiments validated the intense exothermic characteristics predicted by the simulations. This work clarifies the microscopic driving forces behind PPA thermal runaway, providing crucial molecular‐level insights and thermodynamic data for designing safer operational protocols and developing efficient inhibitors at an industrial scale.
- 25 June 2026
- Published by Elsevier in Chemical Engineering Science
- Vol. 336
Dynamic coupled operation space: a conceptual review for enhancing adaptive safety control in chemical processes
- 25 June 2026
- Published by Elsevier in Chemical Engineering Science
- Vol. 336
Dynamic coupled operation space: a conceptual review for enhancing adaptive safety control in chemical processes
- 28 March 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (13) , 6923-6937
Synthesis of Peroxydicarbonate and Heat Transfer Study in a Micropacked Bed
- 28 March 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (13) , 6923-6937
Synthesis of Peroxydicarbonate and Heat Transfer Study in a Micropacked Bed